Total 61 maintenance repair job vacancies in fort worth main

This position is being re-advertised to solicit additional applications. Applicant who applied previously need not reapply unless submitting updated and/or missing information.

• Installs, modifies, maintains, and performs preventive maintenance on various plumbing systems.
• Installs, modifies, maintains, and performs preventive maintenance on various low voltage electrical systems.
• Installs, modifies, maintains, and performs preventive maintenance on HVAC systems.

• Inspect a variety of thermostats, switches, flame safeguard controls, linkages, electrical and electronic safety devices.
• Perform maintenance on a variety of oil fired and gas fired furnaces.
• Inspect a variety of thermostats, switches, flame safeguard controls, linkages, electrical and electronic safety devices.
• Repair gas mains to include installation of new piping.
• Adjust heating plants for maximum efficiency, using test equipment such as CO2 tester, Testo Digital Combustion analyzer, monometer, and Honeywell systems tester.
• Remove, clean, adjust and replace nozzles, electrodes, strainers, filters, orifices, thermocouples and hot surface igniter unit.

• Performs simple and routine maintenance and repair of grounds, exterior structures, buildings, equipment, and related utilities.
• Assists higher graded maintenance workers or tradesmen in the performance of their work.
• Performs minor carpentry repairs using simple measures and hand tools on such tasks as replacing broken planks on picnic tables; broken windows using precut stock; minor adjustments or replaces hinges, latches, and catches.
• Performs minor painting using brush and roller according to specific instructions on projects where appearances are not critical such as staining picnic tables and trash barrels.
• Performs minor plumbing repairs such as tightening or replacing in-kind fittings and fixtures which do not require custom fitting or solder joints; replaces faucet washers; unplugs drains using a plunger; replaces liquid petroleum gas bottles.
• Receives, unloads and processes incoming shipments according to established procedures. Reports discrepancies and damage to others responsible for such items.
• Performs routine maintenance on campground sites and trails using hand tools to re-grade and reset barriers to restore areas to original appearances. Collects trash.
• Operates a light truck to pick up supplies and to transport materials to and from work sites while assisting on project work.
• Cleans and services chemical toilets, restrooms, and other campground or visitor facilities. Makes minor repairs as needed and refers problems to higher graded workers.
• Operates a forklift to load and unload supplies and light equipment not requiring special rigging.

• Read structural blueprints to perform repairs.
• Read blueprints to perform new structure construction.
• Use tools used in repairing dry wall.
• Use tools used in plumbing repairs.
• Construct wood structures such as floors and walls.
• Install basic electrical components such as outlet boxes.
• Use basic plumbing components.
• Cut accurate straight, angled, and curved cuts on wood products.
• Determine the layout of work sequences.
• Use T-Squares.

The primary purpose of this position is to as an Air Reserve Technician (ART) officer position, to serve as an assistant to the Maintenance Group Commander and as such, reviews policy and assists the Senior ART/Maintenance Group (MXG) Commander in planning, organizing, coordinating, directing, and controlling all activities and operations of the Maintenance Group. Incumbent receives experience, training, and instruction in providing overall staff direction to all Maintenance Group programs.

RESPONSIBILITIES:
1. In conjunction with the MXG Senior Art/Commander plans, direct, organizes, manages, and provides oversight for activities in the Maintenance Group. Responsible to the Maintenance Group Senior ART/Commander in integrating, and executing all aspects of the assigned maintenance activities/programs within cost, schedule, performance and/or system supportability requirements.
2. Represents the Maintenance Group Commander at a variety of installation and functional area organizational meetings. Establishes, develops, and maintains effective working relationships with other group commanders, representatives and senior staff at Numbered Air Force, HQ AFRC, gaining MAJCOMs, and Air Staff.
3. Ensures effective operation of the aircraft maintenance complex. Make periodic and comprehensive assessment of program through a review of performance indicators, productivity goals and accomplishments, deficiency reports, audit findings, etc.
4. Accomplishes special staff studies, projects and initiatives resulting from legislative and regulatory changes, reengineering efforts, new technology, privatization, program/mission changes, etc. Identifies the need for studies, establishes goals and objectives, and designates working group(s) as needed.

• Plan and lay out work from blueprints, sketches, drawings, specifications, and work orders.
• Interpret and apply complex building plans to determine material, tools, and equipment needed Completes work from initial layout to final assembly.
• Apply a full range of carpentry methods in accomplishing complex tasks.
• Apply a full range of painting methods in accomplishing complex tasks.
• Prepare various surfaces of interior and exterior components of buildings.
• Mix, thin, blend, match, tint, and tone coating materials.

• Incumbent works under the direction and reports to the Support Services Specialist. Receives, interprets, initiates, and processes maintenance requests for repairs or services.
• Coordinates the initial and long-term planning for the maintenance of all material and equipment utilized by the installation.
• Oversees a comprehensive preventive maintenance program and coordinates on-demand maintenance. Serves as warranty coordinator by monitoring and maintaining reports of equipment under warranty.
• Ensures the program performs within budgetary constraints with purchases, repair parts and supplies. Inspects and diagnoses equipment to make a determination on the best means to repair equipment.
• Coordinates appropriate course of actions for repairs. Identifies equipment to be salvaged or what disposition should be made.

• Plan daily weekly and monthly work schedules and sequences of operations for subordinates.
• Establish deadlines and priorities on the basis of methods, and policies established by higher levels of supervision.
• Explain work requirements, instructing subordinates in new procedures and providing advice when problems arise.
• Investigate work related problems, such as low productivity, identify causes and implement corrective action within limits of authority.
• Develop and counsel employees on performance standards, implementing formal and informal performance appraisals.
• Determine supplies needed for planned projects and for repairs and/or upgrades to existing structures and grounds improvements.
• Train employees on safe work practices and the use of protective clothing and equipment.
• Ensure current information is provided to all employees regarding hazardous materials in the work environment.

• Provides technical guidance and oversight to technicians and operators in order to ensure, sustainment and successful Operation, Maintenance, and Repair (OMR).
• Provide services for horizontal and vertical infrastructures, such as Headquarters (HQ), Tactical Equipment Maintenance Facility (TEMF), UPH, Roads and Grounds, Tank Trails, firebreaks, and facilities alike.
• Directs small and large scale Sustainment, Restoration, and Modernization (SRM) construction projects to ensure code compliance.
• Manages team members to assist in the prevention, pre-suppression and suppression of woodland fires. Manages team members to assists with controlled burns, back burns and other activities necessary to control fires.
• Responsible for identifying, performing, and implementing the Directorate of Public Works (DPW’s) Deliberate Risk Management (DRM) program within assigned areas (shops) of supervision.
• Performs Deliberate Risk Assessments (DRA) in accordance with Army and Garrison policy.
• Advises and formally instructs employees on occupational safety and advanced safety programs, policies, procedures, and regulations.
• Complies with and supports the Army Safety Program as outlined in AR-385-10 and Fort Hood regulations.
• Plans weekly and monthly work schedules and sequence of operations for subordinates.
• Develops directives and policies consistent with the Commander's guidance and policies to ensure that mission requirements are met.
• Develops performance standards, counsels employees on performance, and makes formal and informal performance appraisals.
• The employee will drive a utility truck or similar vehicle to and from the work site in order to transport self, supplies and other employees.

Responsible for the maintenance and repair of the institution buildings and structures, through the supervision of inmate workers.

Supervises and trains inmate workers in various phases associated with the construction, repair, maintenance, and renovation of buildings and related structures, grounds, fixtures and utilities, requiring the use of a variety of trade practices such as carpentry, masonry, plumbing, cement work, painting, welding, roofing, and other related trades.

Responsible for design and development of plans, specifications and blueprint drawings.

Responsible for adhering to safety procedures for hazardous material handling, OSHA requirements, and environmental issues.

Responsible for the ordering and purchasing of all material/equipment needed to perform assigned projects.

Along with all other correctional institution employees, incumbent is charged with responsibility for maintaining security of the institution. The staff correctional responsibilities precede all others required by this position and are performed on a regular and recurring basis.

WG-08: The purpose of this position is to perform limited diagnosis, routine repairs, and maintenance on combat, tactical, commercial, and special purpose vehicles and equipment. Performs limited diagnosis, routine repairs and maintenance on heavy-duty mobile equipment, combat, tactical and automotive vehicles. Performs limited diagnoses to determine the cause of mechanical failures by means of visual and auditory checks and/or uses basic test equipment such as compression testers, voltmeters, ohmmeters and pressure gauges. Removes, replaces, adjusts, cleans and installs parts and components such as wheel seals, switches, sensors, fuel pumps, water pumps, power steering pumps, brakes, filters, radiators, bearings, springs, shock absorbers, wheel cylinders, starter motors, mufflers, battery cables, and other items of similar complexity. Independently performs routine repairs and maintenance functions in remote locations that can be accomplished by removing, cleaning, reinstalling, or replacing defective parts of components and systems using standard parts. Conducts limited readiness and repair inspections on vehicles and associated equipment supported by the activity. May perform routine maintenance and limited repairs on basic communication equipment such as radios, field telephones, amplifiers, switchboards, recorders, intercoms by removing and replacing components and elements. In conjunction with or in the absence of the Tools and Parts Attendant, may maintain supply documentation, and the receipt, store, issue, and inventory of tools and parts used in the trades operation. Performs other duties as assigned.
WG-10: The purpose of this position is to perform maintenance, repair, troubleshooting, inspection, and/or overhaul of a variety of combat, tactical, commercial, and special purpose vehicles and equipment. Troubleshoots, performs maintenance and major repairs on heavy-duty mobile equipment, combat, tactical and automotive vehicles. Troubleshoots equipment and diagnoses the cause of mechanical failures by means of visual and auditory checks and/or uses test equipment such as engine analyzers, compression testers, voltmeters, ohmmeters, pressure gauges, and computer diagnostic tools. Removes and disassembles engines and major assemblies, sub-assemblies, components, and fuel, hydraulic, and oil pressure systems. Independently performs repairs and maintenance functions in remote locations that can be accomplished by removing, cleaning, reinstalling, or replacing defective parts of components and systems such as injectors, leaking wheel cylinders, corroded mufflers, fuel tanks, brake cylinders and worn brake shoes, voltage regulators, generators, injector pumps, and fuel pumps. Conducts readiness and repair inspections on vehicles and associated equipment supported by the activity. May maintain and repair electronics communication equipment by removing and replacing components and elements. Assists in the maintenance of production reports and records and makes recommendations to the supervisor. Performs other duties as assigned.
WG-11: The purpose of this position is to troubleshoot, repair, maintain, inspect, and/or overhaul a variety of complex combat, tactical, commercial, and special purpose vehicles and equipment having complicated mechanical and non-mechanical systems with a variety of interconnected systems. Performs maintenance, troubleshooting, and major repair on heavy-duty mobile equipment, combat, tactical, and automotive vehicles. Troubleshoots equipment with a variety of the mechanically complex major systems and diagnoses difficult performance problems and the cause of mechanical failures by means of visual and auditory checks, uses test equipment such as engine analyzers, compression testers, voltmeters, ohmmeters, pressure gauges and computer diagnostic tools. Removes and disassembles engines and complex major assemblies, sub-assemblies, components, and fuel, hydraulic, and oil pressure systems. Independently performs repairs and maintenance functions with little or no supervision in remote locations. Conducts readiness and repair inspections on vehicles and associated equipment supported by the activity. Performs electrical repairs on complex state of the art electrical and electronic systems requiring extensive training on specialized diagnostic equipment to identify problems. Assists in the maintenance of production reports and records, and makes recommendations to the supervisor. Performs other duties as assigned.

• Perform repairs on a variety of systems that provide for heating, cooling, humidifying, dehumidifying, cleaning, filtering and/or circulating.
• Estimate material requirements such as pipes, fittings, and fixtures in the sizes, types, and/or lengths needed.
• Repair damaged sections, fittings, and fixtures of plumbing, electrical, or heating, ventilation, and air condition parts.
• Maintain tools and accessories such as sharpening saws, scrapers, and paint brushes
• Transport personnel, materials, equipment, trash, and water throughout the project site and public roads.

• Perform repairs to small and/or domestic heating units and systems.
• Provide intermediate carpentry, painting, and/or plumbing allied support.
• Perform flat work welding using oxygen-acetylene and electric arc processes.
• Perform repairs to domestic and commercial refrigeration and air conditioning units.
• Provide service and repairs to domestic and commercial type kitchen and bakery equipment.
• Replace components such as compressors, thermostats, and coils on heating and air units and systems.

• This position will be responsible for the daily golf course management of an 18-hole golf course, driving range and practice area.
• This position will be responsible for directing and supervising all subordinates of maintenance employees.
• The superintendent will be responsible for maintaining regular training and certification of membership and spraying licensing.
• This position will be responsible for preparing a working budget outlining annual maintenance requirement.
• The superintendent will be responsible for development of a preventive maintenance plan of all turf equipment and maintenance vehicles.

• Spearhead formal and informal training to the organization.
• Maintain accountability of administrative actions.
• Review inventory of supply operations for discrepancies.
• Organize shop tools to distribute appropriately to employees.
• Prepare daily reports to monitor shop equipment database.