Total 55 maintenance repair job vacancies in fairchild afb washington

• Lead team members in timely completion of monthly scheduled workload and unscheduled breakdown maintenance.
• Distribute and balance workload among team members in accordance with established policy and immediate priorities.
• Diagnose malfunctions, troubleshoot to isolate failures, and complete repairs in a wide variety of diagnostic and therapeutic medical and dental equipment.
• Perform scheduled preventive maintenance, calibration, function verification, and safety testing on a wide variety of diagnostic and therapeutic medical and dental equipment.
• Advise management, professional staff, and executive management on technical matters regarding maintain/upgrade/replace decisions within particular area of expertise.

Functions as a member of the Facilities Management Department, Administration Division, Federal Bureau of Prisons(BOP), Central Office, Washington, D.C.

Responsible for the maintenance and repair of all Central Office buildings and structures.

Performs a wide range of general maintenance duties in the Central Office buildings. The Central Office building includes 490,000 gross square feet and houses approximately 2,000 employees.

Responsible for various phases associated with the construction, repair, maintenance, and renovation of buildings and related structures, grounds, fixtures, and utilities, requiring the use of a variety of trade practices such as carpentry, masonry, plumbing, cement work, painting, welding, roofing, electric, HVAC, and other related trades.

Requires a general knowledge of carpentry, minor electrical work, plumbing, painting and related trades. Repair surfaces by such methods as sanding, scraping, or wire brushing for applications of coating materials such as painting, staining, varnishing or shellacking on furniture on furniture, dry walls, ceilings, trims, etc. cutting and installing carpet. Repairs and performs preventative maintenance on small equipment and appliances to include hand tools, vacuums, irons, installs hardware to repair sluggish drains, replace washers and tighten screws on fittings or faucets. Remove and replace minor electrical items such as wall switch covers, etc., fill out and complete AF Form 332 for Civil Engineering attention. Coordinate work with CE and other agencies to complete projects. Load, unload or relocate heavy and or bulky items from trucks conveyances, carry and assemble or reassemble items. Use heavy power equipment, mowers etc., adjust, clean, oil and preform maintenance. Cut and trim trees and shrubs. Operates a variety of vehicles including trucks, sedans, and crew cab pickup trucks that weigh up to 10,000 lbs., plow trucks and other snow removal equipment. Completes records and accident reports. Purchases equipment/repair parts as needed. Identifies to supply personnel large costs/quantity items needed to perform work. Performs other related duties as assigned.

If interested in applying for this position you may preview the online application: https://apply.usastaffing.gov/ViewQuestionnaire/12622272

• *Utilize skills in carpentry, plumbing, electrical, concrete, welding, and painting to inspect, repair and replace fixtures, utilities, and grounds upkeep for related structures.
• *Operate tools and equipment of various trades, including electrical test equipment, lawn care equipment, hand tools, power tools, air compressors, chain saws, compactors, and portable pumps.
• *Operate various equipment, pick-up trucks, forklift, tractor, all-terrain vehicle, and riding lawn mower.
• *Responsible for the proper care and maintenance of equipment used.
• *Perform daily maintenance and does minor repairs on supported facilities.
• *Schedule and report use of materials and equipment utilized on each job.

The purpose of this position is to perform minor construction and repair on existing structures involving standard measurements, specifications, instructions, and basic shop mathematics. Installs exterior and interior trim using preplanned materials, such as baseboard, and molding. Replaces broken or missing acoustical ceiling tile, broken door and window trim, window screens, stairway steps, wooden porches, door jambs, and other damaged wood components. Interprets specifications, such as work orders with sketches or easily understood blueprints and technical instructions to plan and layout work. Repairs and refinishes furniture and repairs.

Follow inspections conducted by incumbent or specific information (work orders), locates and makes repairs to plumbing that can be accomplished by installing, removing, cleaning, replacing, modifying, package, and sealing defective parts of utility, supply, gas distribution, and disposal systems such as dirty traps, sections of broken tile or pipe, and leaky drains using existing routes, openings, hangers, and levels. Caulks and seals such things as elbows, union joints, and tiles or pipes, faucets, and shower drains. Checks operation and completes needed repairs to small parts and sections of existing systems, such as water heaters, disposal units, and faucets.

Prepares wood and metal surfaces to be painted; mixes and prepares coating aerial, and applies coating materials. Prepares surfaces by scraping, wire brushing, masking, spackling, and sanding surfaces. Mixes and thins coating materials to obtain desired consistency following specific written directives. Applies coating materials, such as primers, paints, varnishes, and shellacs, using standard application techniques and ensures that the coating finish meets surface protection requirements.

Makes minor electrical repairs by replacing fixtures, switches, stove burners, electrical cords, bulbs, and fluorescent fixtures. Responsible for the maintenance and upkeep of gasoline powered equipment to ensure equipment is in good mechanical and safe operating condition. Performs routine maintenance such as oil change, minor adjustments, spark plugs cleaning and replacement on such equipment. Performs routine inspection and minor maintenance on Lodging vehicles to include oil change, battery checks, condition of brakes, filling tanks with gasoline, checking fluid levels, hoses and filters, changing fan belts, and replacing lights.

Required to move equipment, furniture, and supply items between quarters, supply room and warehouses. Drives vehicles weighing up to I0,000 pounds to various locations both on and off base. May operate a government vehicle to include light truck, sedan, golf cart, etc.

If interested in applying for this position you may preview the online application: https://apply.usastaffing.gov/ViewQuestionnaire/12620453

Tour of Duty:  Day Shift, 5:00 am - 2:30 pm with an option of an Alternate Work Schedule (AWS).

Work may include holidays and weekends on a regular and reoccurring basis.

**The incumbent of this position is designated as "Emergency/Essential" and will be required to report to work during emergencies and inclement weather conditions.**

To qualify for this position, you must have journey level experience in at least two of the following areas: Electronic Equipment Maintenance (BAS/DDC), HVAC, Plumbing or Pipefitting. The ideal candidate will have journey level experience in HVAC. This experience must be reflected in the resume.

DUTIES AND RESPONSIBILITIES:

HVAC and Refrigeration Troubleshooting, Installation and Maintenance

Maintains a variety of commercial and industrial systems in order to locate and check elements such as those which control low and high side pressures, the temperature of the cooling units, the temperatures of the liquid and suction lines and the running time of the various mechanisms.

Dismantles, repairs and reassembles units such as pumps, impellers, compressors, receivers and evaporators.

Overhauls valves by adjusting or replacing gaskets, springs, floats, diaphragms, valve fittings, seals and couplings and by aligning motors and drives.

Ensures the repair, overhaul, maintenance and servicing of equipment such as (but not limited to) refrigerator, freezers, water coolers, ice machines, commercial air handling units and smaller air conditioning units; ventilation systems, humidification and dehumidification systems, air compressors and central vacuum systems.

Oversees the installation, repair and troubleshooting of low voltage equipment such as thermostats and controllers; complex heating units related to steam, domestic and secondary hot water systems; other HVAC equipment such as variable frequency drives and motor controllers; and routine maintenance such as replacement of filters, bearings, calibration of sensors and other equipment.

Troubleshoots equipment electrical circuits to include VFDs, DX cooling units and low voltage controls.

Plumbing and Piping Systems Installation, Inspection and Maintenance

Troubleshoots and analyzes defects or malfunctions in specialized pipeline systems and related fixtures.

Inspects piping system equipment and fixtures using a variety of diagnostic techniques and equipment to locate a problem.

Checks steam and chilled water system for leaks, defects in equipment and malfunctions.

Independently conducts inspections of and troubleshoots piping systems, identifying irregularities and existing and/or potential problems.

Installs, modifies, repairs, maintains and troubleshoots high and low pressure piping systems, including domestic water distribution systems, sewage systems; steam generation systems; tempered water systems; hydronic heating systems; drain, waste and vent systems; sump pumps, sewage ejectors, irrigation systems; and fountain display systems.

Independently assembles, installs and repairs replacement pipes, fittings and fixtures of air, water, fountain, vacuum, chemical and other specialized pipeline systems and related fixtures according to specifications and plumbing codes.

Tests systems and equipment for proper operation, circulation, flow, pressure and ensures leak-free joints

Performs a variety of routine pipefitting tasks such as fabrication, installation, modification, repair and testing of piping and tubing.

Electronic Equipment Maintenance (Building Automation System/Direct Digital Controls)

Works on highly complex systems that are characterized by application of advanced electronic theory and frequent technological changes in the systems.

In support of HVAC operations, installs, maintains, troubleshoots and repairs new and existing highly complex systems of electronic sensing and control as well as new systems of similar complexity, mechanic implementing maintenance and repair procedures on major new or modified systems.

Responsible for installation, modification, operation, maintenance, calibration, repair and troubleshooting of the Direct Digital Controls (DDC) and for the day to day overall performance of the DDC.

Installs, modifies, operates, maintains, calibrates, repairs and troubleshoots sensor and controls and related interfaces with building equipment.

Provides technical support to the Facility Manager's team in finding solutions to control problems with the DDC system and its related hardware.  Provides technical solutions to problems with control of individual jurisdictional equipment.

NOTE:   Chlorofluorocarbon (CFC) certification by and EPA-Approved Technician's Certification Program is required.  Proof of certification is required upon selection.

• Assist in the repair of boiler plant heating systems including oil and gas fired high pressure boilers producing steam or high temperature hot water and distribution systems and related auxiliary components.
• Operate low pressure boilers and assists a journey level boiler plant operator in the operation of high-pressure boiler equipment to produce and control the amount of steam or high temperature water necessary to meet demands.
• Perform repair and maintenance on low pressure and high-pressure steam and water and distribution systems; removes and replaces parts, cleans refractory, repairs leaks, performs preventive maintenance on pumps, fans, etc.; performs emergency repairs.
• Assist with maintenance such as: checking multiple types of valves for proper operation and adjustment's as necessary to maintain specified pressures, no leaks and accuracy.
• Check pipes and pipe joints for leakages, checking insulation for signs of deterioration or damage and replacing or repairing defective parts as needed.

• Performs the simpler aµd more routine tasks of the plumbing trade.
• Performs simpler and more routine carpentry duties.
• Performs simpler and more routine duties of the air conditioning equipment trade.
• Provides support for all crafts in the Operations and Maintenance(O&M) section.
• Utilizes safety practices and procedures following established safety rules and regulations and maintains a safe and clean work environment.

The primary purpose of this position is to serve as the Senior Air Reserve Technician (ART) Officer with overall supervision and management of either an Aircraft Maintenance Squadron, a Maintenance Squadron, an Equipment Maintenance Squadron or a Component Maintenance Squadron at an Air Force Reserve Command (AFRC) unit-equipped or associate unit.

RESPONISIBILITIES:
1. Plans, organizes, and oversees the activities of the squadron. Manages assigned maintenance resources and ensures production meets operational requirements and technical standards. Recommends procedural and technical improvements and modifications.
2. Exercises supervisory personnel management responsibilities to include personnel and position management, equal opportunity, security, and safety. Advises employees regarding policies, procedures and directives of management. Maintains sound positions management practice when determining types and numbers of positions to support the organizational mission.
3. Represents organization with a variety of installation and functional area organizations. Establishes, develops, and maintains effective working relationships with internal and external customers. Meets with key customers and coordinating officials to assess customer satisfaction, explain organization policy and procedures, and resolves significant problems that arise.

• As deputy to the commander, plans, organizes, and oversees the day-to-day operations of the Maintenance Group. Provides executive leadership and managerial insight to subordinate 27 SOMXG squadrons.
• Exercises supervisory personnel management responsibilities. With the 27th Special Operations Maintenance Group (SOMXG) Commander, directs, coordinates, and oversees the work of more than 1600 personnel, comprised of three maintenance squadrons and one maintenance operations support squadron.
• Represents the 27 SOMXG Commander with a variety of installation and functional area organizations. Establishes, develops, and maintains effective working relationships with installation command; commanders and deputies of other groups on the installation;
• Manages assigned resources to achieve peak mission support with greatest economy. Analyze operational trends forecasts requirements and identifies shortfalls.
• Participates in special projects & initiatives & performs special assignments to include long-term planning, functional/technical advice & guidance & continuity of management from the Maintenance perspective.

A WS-5801-10, SURFACE MAINTENANCE MECHANIC SUPERVISOR:

• Plans use of subordinate workers, equipment, facilities, and materials on a week-to-week or month-to-month basis. Establishes deadlines, priorities, and work sequences, and plans work assignments based on general work schedules, methods, and policies set by the supervisor. Coordinates work with supporting or related work functions controlled by other supervisors. Determines the number and types of workers needed to accomplish specific projects. Determines skills, materials, and equipment required to do the work. Redirects individual workers and resources to accomplish unanticipated work. Informs the supervisor of the need to revise work schedules and re-estimate labor and other resources. Participates in the initial planning of current and future work schedules, staffing needs, estimates, and recommendations as to scheduling projected work. Assists the supervisor with quarterly funding distribution and decisions, based on operational needs for units supported by customer activities. Reviews funding requirements, prioritizes request and allocates funding based on readiness, training, and mobilization requirements. Provides management with workload data, estimates, and recommendations to facilitate more effective management decisions for staffing and funding requirements to support customer units.
• Assigns tasks to be performed based on readiness and explains work requirements, methods, and procedures. Investigates work related problems such as excessive costs or low productivity and determines causes. Implements corrective actions within their authority to resolve work problems. Recommends solutions to staffing problems, engineering requirements, and work operations directed by other supervisors. Ensures work in progress and completed work meets established standards by implementation of a Quality Control and Assurance program within the organization. Ensures equipment repairs do not exceed maintenance expenditure limits in accordance as established by regulation and or policies. Effectively, efficiently, and economically makes adjustments as necessary to maximize production, accomplish specified tasks, and manage resources. Notes work related problems and independently implements corrective actions, which can be taken without affecting work operations controlled by other supervisors. Assures tools, special tools, test measurement and diagnostic equipment, personal protective equipment, repair parts, petroleum, oils and lubricants, and other materiel are available when needed. Manages maintenance backlog through coordination with other maintenance activities. Evacuates and accepts equipment, repairs, and services to and from other maintenance facilities.
• Determines training needs of subordinates and arranges for accomplishment. Sets performance standards, and makes formal appraisals of subordinate work performance. Initiates recommendations for promotion or reassignment of subordinates. Ensures that regulations governing safety and housekeeping are observed with appropriate protective clothing and equipment being utilized.
• Performs non-supervisory work, such as, transporting equipment, performing maintenance tasks, etc.
• Develops, publishes, and ensures employee compliance with standing operating procedures for the activity supervised. Implements and complies with agency, state, and federal regulatory Occupational Safety and Health, and environmental requirements. Ensures use of quality conformant products through compliance with established materials shelf life programs. Ensures all aspects of Force Protection to include physical security, facility and vehicle key control, property accountability, access control and employee protection in accordance with established policies and regulations. Implements procedures to account for all real property, installation property, MTO&E (Modified Tables of Organization and Equipment) property, TDA (Tables of Distribution and Allowances) property, and installed equipment located at or assigned to the facility in accordance with state and federal regulations and policies. Ensures subordinates are trained, qualified, and equipped with proper personnel protective equipment, environmental mediation equipment and materials. Ensure the employees wear appropriate safety equipment and follow pertinent safety precautions.
• Prepares for and participates in various types of readiness evaluations, inspections, mobilization and command support exercises. May be required to perform such additional duties as structural fire fighting, aircraft fire/crash/rescue duty, security guard, snow removal, munitions loading and handling, heavy equipment operation, maintenance of facilities and equipment, or to serve as a team member on boards to cope with natural disasters or civil emergencies.
• Other duties as assigned.

A WG-5801-8/10, SURFACE MAINTENANCE MECHANIC:

• Performs limited diagnosis, routine repairs and maintenance on heavy-duty mobile equipment, combat, tactical and automotive vehicles. Assists higher graded mechanics in the repair and/or overhaul of major systems to include internal combustion engines, turbine engines, automatic and non-automatic transmissions, heavy duty drive line systems, and hydraulic utility systems and controls. Makes routine repairs that can be accomplished by removing, adjusting, or replacing defective or worn parts and components. Performs work in accordance with technical manuals, lubrication orders, maintenance bulletins, regulations or management policies.
• Performs limited diagnoses to determine the cause of mechanical failures by means of visual and auditory checks and/or uses basic test equipment such as compression testers, voltmeters, ohmmeters and pressure gauges. Determines when parts should be cleaned, adjusted or replaced with standard parts to complete work orders.
• Removes, replaces, adjusts, cleans and installs parts and components such as wheel seals, switches, sensors, fuel pumps, water pumps, power steering pumps, brakes, filters, radiators, bearings, springs, shock absorbers, wheel cylinders, starter motors, mufflers, battery cables, and other items of similar complexity.
• Independently performs routine repairs and maintenance functions in remote locations that can be accomplished by removing, cleaning, reinstalling, or replacing defective parts of components and systems using standard parts. Receives guidance and instruction from a higher graded mechanic or supervisor to perform non-routine and more complex repairs on portions of major assemblies and/or systems. May provide field maintenance at unit locations as part of a "contact team". Recovers and evacuates inoperable vehicles from the unit location of breakdown.
• Conducts limited readiness and repair inspections on vehicles and associated equipment supported by the activity. Performs Preventive Maintenance Checks and Services (PMCS) and ensures vehicles and equipment are properly serviced, including brake adjustments, replacing hydraulic fluids, greasing, cleaning, etc. Performs other preventive maintenance operations as required to ensure that equipment is functioning properly.
• May perform routine maintenance and limited repairs on basic communication equipment such as radios, field telephones, amplifiers, switchboards, recorders, intercoms by removing and replacing components and elements. Performs minor body and fender, or other metal repairs, using peening hammers, dollies and limited welding. Performs limited repairs and routine maintenance on small arms and accessory equipment by replacing worn or damaged parts. Makes minor repairs to canvas and leather items using bonding/sealing compounds and hand tools such as awls, canvas needles etc.
• In conjunction with or in the absence of the Tools and Parts Attendant, may maintain supply documentation, and the receipt, store, issue, and inventory of tools and parts used in the trades operation.
• Other duties as assigned.

Responsible for the maintenance and upkeep of equipment to make sure they are in good mechanical and safe operating condition. Performs routine inspection and minor maintenance on all vehicles assigned to Outdoor Recreation. Uses and maintains tools and equipment. Utilizes hand and power tools such as but not limited to: drills, power saws, routers, standard hand tolls, straight edge, chalk line, tapes, rules, caulking items, pipe wrenches, rollers, putty knife, etc. Must maintain all current certification required to complete all assigned tasks (ie HAZMAT, Safety, Motor Vehicle Operating, etc). Drives/operates vehicles/equipment weighing up to 10,000 pounds at various locations both on and off base. Operates field-type tractors with attachments to maintain the grasses and brush in all areas. Operates Snow Removal and Grooming Equipment to include Snow Maker. Performs other related duties.

Physical Effort: The work requires considerable bending, standing, kneeling, climbing, and stooping. On site work requires physical exertion when handling heavy and bulky materials. Work typically requires climbing ladders. Frequently caries and lifts materials and equipment weighing up 40 pounds unassisted, and occasionally lifts or moves heavier items with the assistance of lifting devices or other workers.

If interested in applying for this position you may preview the online application: https://apply.usastaffing.gov/ViewQuestionnaire/12625699

A WG-5801-8/10, SURFACE MAINTENANCE MECHANIC:

• Troubleshoots, performs maintenance and major repairs on heavy-duty mobile equipment, combat, tactical and automotive vehicles. This may include self-propelled artillery, tracked cargo and personnel carriers, road graders, mobile cranes, front loaders, conveyors, bulldozers, power shovels, compressors, generators, tanks, tracked combat vehicles, sedans, buses, all terrain vehicles, trucks, semi trailers, forklifts, tractors, and accessory equipment. Troubleshoots, repairs and overhauls major systems to include internal combustion engines, turbine engines, automatic and non-automatic transmissions, heavy duty drive line systems, and hydraulic utility systems and controls. Makes repairs to assemblies and components such as voltage regulators, generators/alternators, brake cylinders, etc. Performs work in accordance with modification work orders, technical manuals, lubrication orders, maintenance bulletins, regulations or management policies.
• Troubleshoots equipment and diagnoses the cause of mechanical failures by means of visual and auditory checks and/or uses test equipment such as engine analyzers, compression testers, voltmeters, ohmmeters, pressure gauges, and computer diagnostic tools. Utilizes embedded diagnostics in equipment and a wide variety of original equipment manufacturer system analyzers in order to determine the exact nature or extent of repair. Determines what adjustments may be necessary to complete work orders, and whether any additional repairs other than those specified or indicated on the work order are necessary.
• Removes and disassembles engines and major assemblies, sub-assemblies, components, and fuel, hydraulic, and oil pressure systems. Makes the appropriate repairs, overhaul, or modifications in accordance with the proper repair specifications and procedures. Reassembles engines and other systems, and adjusts, tests, and reinstalls in vehicles and equipment as necessary. Makes adjustments and repairs to electrical and suspension systems. May install pistons, sleeves, rings, bearings, rods, crankshafts, timing gears, and rocker arms. May be required to perform fuel injection equipment repair, overhaul, rebuild, and calibration duties utilizing a variety of complex test and calibration equipment.
• Independently performs repairs and maintenance functions in remote locations that can be accomplished by removing, cleaning, reinstalling, or replacing defective parts of components and systems such as injectors, leaking wheel cylinders, corroded mufflers, fuel tanks, brake cylinders and worn brake shoes, voltage regulators, generators, injector pumps, and fuel pumps. Provides technical guidance and specialized team leadership to lower grade employees within the team. Assists lower grade mechanics in performing major repair work. May provide Field and limited Sustainment maintenance at unit locations as part of a "contact team." Recovers and evacuates inoperable vehicles from the unit location of breakdown. May assist higher graded mechanics in repairing a variety of interconnected systems such as electrical, air and hydraulic systems, complex state of the art electrical and electronic systems that use specialized diagnostic equipment to identify problems, complex fuel injection systems and other similar complex systems.
• Conducts readiness and repair inspections on vehicles and associated equipment supported by the activity. Performs operational inspections and ensures vehicles and equipment are properly serviced, including brake adjustments, replacing hydraulic fluids, greasing, cleaning, etc., and performs other preventive maintenance operations as required. Inspects supported equipment prior to use during Inactive Duty Training and Annual Training, to ensure that it is functioning properly. May inspect in-process repair work of lower graded repairer to ensure equipment is being repaired in accordance with pertinent requirements. May serve as a commodity inspector during Command Maintenance Management evaluations or as a member of a Maintenance Assistance Instruction Team. Instructs operator/crew in the maintenance of equipment and provides technical advice and assistance to supported units when requested.
• May maintain and repair electronics communication equipment by removing and replacing components and elements. Equipment includes such items as radios, field telephones, amplifiers, switchboards, recorders, intercoms.
• Assists in the maintenance of production reports and records, and makes recommendations to the supervisor. Plans, organizes, and performs technical analyses as required or assigned. Makes recommendations to the supervisor as to adjustments necessary to effectively, efficiently and economically accomplish the work and maximize production.
• Other duties as assigned.

A WS-5801-10, SURFACE MAINTENANCE MECHANIC SUPERVISOR:

• Plans use of subordinate workers, equipment, facilities, and materials on a week-to-week or month-to-month basis. Establishes deadlines, priorities, and work sequences, and plans work assignments based on general work schedules, methods, and policies set by the supervisor. Coordinates work with supporting or related work functions controlled by other supervisors. Determines the number and types of workers needed to accomplish specific projects. Determines skills, materials, and equipment required to do the work. Redirects individual workers and resources to accomplish unanticipated work. Informs the supervisor of the need to revise work schedules and re-estimate labor and other resources. Participates in the initial planning of current and future work schedules, staffing needs, estimates, and recommendations as to scheduling projected work. Assists the supervisor with quarterly funding distribution and decisions, based on operational needs for units supported by customer activities. Reviews funding requirements, prioritizes request and allocates funding based on readiness, training, and mobilization requirements. Provides management with workload data, estimates, and recommendations to facilitate more effective management decisions for staffing and funding requirements to support customer units.
• Assigns tasks to be performed based on readiness and explains work requirements, methods, and procedures. Investigates work related problems such as excessive costs or low productivity and determines causes. Implements corrective actions within their authority to resolve work problems. Recommends solutions to staffing problems, engineering requirements, and work operations directed by other supervisors. Ensures work in progress and completed work meets established standards by implementation of a Quality Control and Assurance program within the organization. Ensures equipment repairs do not exceed maintenance expenditure limits in accordance as established by regulation and or policies. Effectively, efficiently, and economically makes adjustments as necessary to maximize production, accomplish specified tasks, and manage resources. Notes work related problems and independently implements corrective actions, which can be taken without affecting work operations controlled by other supervisors. Assures tools, special tools, test measurement and diagnostic equipment, personal protective equipment, repair parts, petroleum, oils and lubricants, and other materiel are available when needed. Manages maintenance backlog through coordination with other maintenance activities.
• Plans and establishes overall leave schedules. Determines training needs of subordinates and arranges for accomplishment. Sets performance standards, and makes formal appraisals of subordinate work performance. Initiates recommendations for promotion or reassignment of subordinates. Ensures that regulations governing safety and housekeeping are observed with appropriate protective clothing and equipment being utilized.
• Performs non-supervisory work, such as, transporting equipment, performing maintenance tasks, etc.
• Develops, publishes, and ensures employee compliance with standing operating procedures for the activity supervised. Implements and complies with agency, state, and federal regulatory Occupational Safety and Health, and environmental requirements. Ensures use of quality conformant products through compliance with established materials shelf life programs. Ensures all aspects of Force Protection to include physical security, facility and vehicle key control, property accountability, access control and employee protection in accordance with established policies and regulations. Implements procedures to account for all real property, installation property, MTO&E (Modified Tables of Organization and Equipment) property, TDA (Tables of Distribution and Allowances) property, and installed equipment located at or assigned to the facility in accordance with state and federal regulations and policies. Ensures subordinates are trained, qualified, and equipped with proper personnel protective equipment, environmental mediation equipment and materials. Ensure the employees wear appropriate safety equipment and follow pertinent safety precautions.
• Prepares for and participates in various types of readiness evaluations, inspections, mobilization and command support exercises. May be required to perform such additional duties as structural fire fighting, aircraft fire/crash/rescue duty, security guard, snow removal, munitions loading and handling, heavy equipment operation, maintenance of facilities and equipment, or to serve as a team member on boards to cope with natural disasters or civil emergencies.
• Other duties as assigned.