Total 189 engineering job vacancies in sg central singapore

NTI-NTU Corporate Laboratory is a collaboration between Nanofilm Technologies International Limited (“Nanofilm”, “NTI”), Nanyang Technological University (“NTU”) and supported by Singapore under RIE2025. The Laboratory’s objective is to propel Innovation and Technologies commercialisation through NTU’s innovation and NTI’s deep technology. NTI-NTU Corporate Laboratory aligns with Singapore’s RIE2025 handbook – which emphasises the nation’s commitment to research and innovation, aiming to drive economic growth and address national challenges.

The Nanyang Technological University NTI-NTU Corporate Laboratory is seeking to hire a Research Fellow. The selected candidate will innovate hybridized composite materials and thin film coatings.

Key Responsibilities:

• Design, planning, and setting up of large-scale chemical vapor deposition (CVD) system.

• Design appropriate experiments for CVD growth of 3D boron nitride (BN) foams.

• Optimize CVD growth parameters to obtain tunable high-quality 3D BN foams.

• Perform and analyze SEM, TEM and Raman and other material characterization.

• Perform thermal characterization and real-application tests.

• Prepare monthly reports and presentations for meetings and project deliverables.

Job Requirements:

• Possess PhD degree in Electrical and Electronic Engineering, Material Science, Physics or related disciplines.

• Experience in operating CVD systems.

• Experience in nanomaterial characterization techniques.

• Good management skills.

• Good interpersonal skills.

• Excellent teamwork awareness.

• Good communication and writing in English.

• Strong responsibility for research/work.

We regret that only shortlisted candidates will be notified.

NTI-NTU Corporate Laboratory is a collaboration between Nanofilm Technologies International Limited (“Nanofilm”, “NTI”), Nanyang Technological University (“NTU”) and supported by Singapore under RIE2025. The Laboratory’s objective is to propel Innovation and Technologies commercialisation through NTU’s innovation and NTI’s deep technology. NTI-NTU Corporate Laboratory aligns with Singapore’s RIE2025 handbook – which emphasises the nation’s commitment to research and innovation, aiming to drive economic growth and address national challenges.

The Nanyang Technological University NTI-NTU Corporate Laboratory is seeking to hire a Research Fellow. The selected candidate will innovate hybridized composite materials and thin film coatings.

Key Responsibilities:

• Simulate, design, fabricate and characterize plasma process equipment.

• Familiar with COMSOL software to simulate the influence of magnetic field on plasma flow.

• Conducts various design simulations to refine processes.

• Optimize vacuum coating processes, and leading R&D efforts in material science for application development.

• Drives the development and implementation of coating techniques.

• Oversee the transition from experimental designs to scalable solutions.

• Additionally, the role requires preparation and delivery of comprehensive reports to satisfy the stipulations of funding entities and corporate mandates.

Job Requirements:

• Ph.D. in a relevant engineering or science discipline is required.

• At least 5 years of combined specialized post-doctoral experience in industry or a recognized research institute.

• Expertise in plasma physics, plasma source design, plasma control system design and a strong track record of research publications and patent filings are essential.

• Applicants must demonstrate effective collaboration skills in multidisciplinary settings.

We regret that only shortlisted candidates will be notified.

The School of Civil and Environmental Engineering (CEE) is a leading school for Sustainable Built Environment. The School plays an integral role in spearheading tertiary education, advancing research innovations and providing professional services in a number of key disciplines in Civil and Environmental Engineering and Maritime Studies fields, with the objective of contributing to the technological and economic advancement of Singapore and beyond. The School’s mission in research is to achieve excellence by providing a conducive and intellectually stimulating environment to enable high quality work in strategic directions that are of significant impact to industry, science and technology.

The School of Civil and Environmental Engineering (CEE) is inviting applications for the position of Research Fellow.

Key Responsibilities:

• Conduct research on the production of self-healing cement additive and its applications.

Job Requirements:

• PhD in Engineering, Material Science or Chemistry.

• Strong academic standing with several publications in reputable journals.

• Good English speaking and writing skills.

• Strong references from previous supervisors.

• Previous experience in chemical synthesis and analysis, concrete sample preparation, mechanical testing and microstructural characterization (XRD, TGA, FTIR and SEM-EDX).

• Additional experience in UHPC and carbon-based material in concrete would be preferable, but not required.

We regret that only shortlisted candidates will be notified.

The School of Civil and Environmental Engineering (CEE) is a leading school for Sustainable Built Environment. The School plays an integral role in spearheading tertiary education, advancing research innovations and providing professional services in a number of key disciplines in Civil and Environmental Engineering and Maritime Studies fields, with the objective of contributing to the technological and economic advancement of Singapore and beyond. The School’s mission in research is to achieve excellence by providing a conducive and intellectually stimulating environment to enable high quality work in strategic directions that are of significant impact to industry, science and technology.

The School of Civil and Environmental Engineering (CEE) is inviting applications for the position of Research Associate.

Key Responsibilities:

• Conduct research on thermoelectric properties of inorganic-based alkali-activated materials (AAMs) and its potential for thermal energy harvesting.

Job Requirements:

• Master in Engineering, Material Science or Chemistry.

• Strong academic standing with several publications in reputable journals.

• Good English speaking and writing skills.

• Strong references from previous supervisors.

• Previous experience in chemical synthesis and analysis, concrete sample preparation, mechanical testing and microstructural characterization (XRD, TGA, FTIR and SEM-EDX).

• Additional experience in pavement engineering and SHCC would be preferable, but not required.

We regret that only shortlisted candidates will be notified.

[What you will be working on]

In addition to your teaching duties, you will carry out industry or consultancy projects to help you remain relevant in your profession and to evolving changes in industry, and maintain strong linkages with industry and schools. You will also have the opportunity to have industry attachments or experience on a regular basis to update your skills, knowledge and practices of your profession.

[What we are looking for]

You should have working knowledge of and experience with some of the following:

• coding in multiple programming languages, including C++, C#, Python, Java, JavaScript, .NET, SQL Server, Ruby, HTML, etc;

• general knowledge of computer science and software development concepts;

• collect, analyze and interpret large amounts of data using advanced analytics technologies, such as machine learning (ML), AI and predictive modelling;

• experience working with algorithms;

• knowledge of object-oriented and functional design principles;

• familiarity with DevOps tools, such as integration servers, testing tools, containers, monitoring and analytics programs, and network protocols;

• strong automation skills with both manual and program testing;

• working knowledge of databases and SQL;

• IoT/IIoT system testing and deployment;

• 5G System Integration in design, development, and test of 5G prototype systems;

• collaborate with cross-functional teams on the development and deployment of autonomous mobile robots for various industrial applications, such as material handling, inventory management, and logistics.

Join us in revolutionizing industrial processes through the Industrial Internet of Things (IIoT), autonomous mobile robots, AI, data analytics, and cloud computing technologies. Apply now to be a key driver of innovation and change in our dynamic organization. 

Those with good and relevant experience can look forward to Senior Lecturer or equivalent positions, with career development opportunities to leadership positions in the Colleges or Headquarters.

Applicants may check their application status at the end of 8 weeks from the closing date of this job posting.

[What you will be working on]

You will provide support to the School of Engineering in the areas of, Administration (day to day), Customer Services (front desk), Information Support (in-house systems and SharePoint repository), Finance and Procurement, College events, oversee the housekeeping of staff centre, as well as collation activities of requests from various stakeholders.

[What we are looking for]

- Possess at least 2 years of relevant work experience.

- Good interpersonal and communication skills.

- Familiar with Outlook for Email.

- Competence in Microsoft Office systems (Excel, Word and PowerPoint)

- Good numeracy skills and/or knowledge in Adobe Photoshop would be an advantage.

Applicants may check their application status at the end of 8 weeks from the closing date of this job posting.

[What you will be working on]

In addition to your teaching duties, you will carry out industry or consultancy projects to help you remain relevant in your profession and to evolving changes in industry, and maintain strong linkages with industry and schools. You will also have the opportunity to have industry attachments or experience on a regular basis to update your skills, knowledge and practices of your profession.

[What we are looking for]

You should be trained in Precision Engineering, Mechatronics, Mechanical Engineering, Industrial Engineering or a related field in the discipline. Precision machining and manufacturing background with teaching experience is a plus.

Preferably three years of industry experience with at least one of the following areas: CNC machining and manufacturing, Mechatronics/Robotics, Automation, Programmable Logic Controllers, Systems Integration, Networking, Industrial and Collaborative robotics, Electromechanical Systems, Mechanical Engineering Design.

Multi-disciplinary engineering industry experience with a focus on Advanced/Smart Manufacturing, Industrial Internet of Things, machine to machine networking and data collection, Data Analytics and Systems Analysis for Manufacturing, Systems Integration of Industry 4.0 will be an added advantage.

Skills/Abilities:

- Proficient in the use of any of the 3D CAD/CAM software’s such as AutoCAD, Solidworks, Autodesk Inventor or equivalent, Mastercam and Solidcam for CNC Machine programming

- Proficiency in electronics hardware design and prototyping, including: Microcontroller Programming (Arduino, Raspberry Pi), Python, Labview, Matlab, and Arduino IDE or equivalent

- Ability to work with colleagues-students, convey knowledge in-a-form students can understand, and be able to adapt teaching techniques to student needs-various instructional setting.

- Comfortable with technology and its integration in the classroom lesson delivery.

- Knowledge and familiarity with Data Analytics and Coding Essentials will be an advantage.

- Proficient in Microsoft Office applications such as word-processing and presentation software, internet, including e-mail application.

- Effective verbal, written, and listening communication skills.

- Ability to work independently as well as within a group and be able to motivate students and should be able to work with a diverse group of students.

Applicants may check their application status at the end of 8 weeks from the closing date of this job posting.

[What you will be working on]

In addition to your teaching duties, you will carry out industry or consultancy projects to help you remain relevant in your profession and to evolving changes in industry, and maintain strong linkages with industry and schools. You will also have the opportunity to have industry attachments or experience on a regular basis to update your skills, knowledge and practices of your profession.

[What we are looking for]

You should be trained in Engineering or other Engineering-related disciplines, with preferably three years of relevant practical experiences in Mechatronics or Manufacturing industry.

Good knowledge and technical competency in some of the following key area(s) will be an advantage:

• 3D software such as AutoCAD, Solidworks, Autodesk’s Inventor or equivalent.

• System integration of sensors for IoT application

• Data Analytics for Predictive Maintenance

• Programming Language (e.g.: Python, C/C++, Arduino, etc.)

• Computer Vision, Robot Operating System

• AR and VR applications

Those with good and relevant experience can look forward to Senior Lecturer or equivalent positions, with career development opportunities to leadership positions in the Colleges or Headquarters.

[What you will be working on]

In addition to your teaching duties, you will carry out industry or consultancy projects to help you remain relevant in your profession and to evolving changes in industry, and maintain strong linkages with industry and schools. You will also have the opportunity to have industry attachments or experience on a regular basis to update your skills, knowledge and practices of your profession.

[What we are looking for]

You should be trained in Marine & Offshore Engineering or related disciplines with at least 3 years of relevant work experience in shipyards or sailing experience onboard a foreign going vessel as a marine engineering officer.

You should also possess the following skills:

- Maintenance and operation of all marine mechanical and electrical equipment and their standards.

- Knowledge of marine engine, piping, electrical, electronic, hydraulic system, and control technology.

- Liquefied Natural Gas (LNG) and Other Alternative Fuels - Offshore wind and other renewable solutions.

- Future offshore systems, autonomous vessels, Electrification vessels, Maritime data analytics and Marine robotic.

- Growth mindset in teaching pedagogy and passionate about teaching - Previous experience as an instructor/coach in this trade would be an advantage

Added advantage if you possess in any of the following knowledge or skill sets

• coding knowledge in any of the programming languages, such as, Python, Java, JavaScript, .NET, SQL Server, Ruby, HTML, etc;
• IoT/IIoT system testing and deployment
• 5G System Integration in design, development, and test of 5G prototype systems;
• collaborate with cross-functional teams on the development and deployment of autonomous mobile robots for various industrial applications, such as material handling, inventory management, and logistics.

Those with good and relevant experience can look forward to Senior Lecturer or equivalent positions, with career development opportunities to leadership positions in the Colleges or Headquarters.

Applicants may check their application status at the end of 8 weeks from the closing date of this job posting.

[What you will be working on]

In addition to your teaching duties, you will carry out industry or consultancy projects to help you remain relevant in your profession and to evolving changes in industry, and maintain strong linkages with industry and schools. You will also have the opportunity to have industry attachments or experience on a regular basis to update your skills, knowledge and practices of your profession.

[What we are looking for]

You should be trained in Mechanical Engineering or other Engineering-related disciplines, with preferably three years of relevant practical experiences in Mechanical or Manufacturing industry.

Good knowledge and technical competency in some of the following key area(s) will be an advantage:

- 3D modelling, finite element analysis and generative design

- System integration of sensors for IOT application

- Data Analytics for Predictive Maintenance

- Programming Language (Python, C/C++, Matlab, Java)

- Computer Visions, Robotic Operating System

- AR and VR package developments

- Development of Autonomous Mobile Robotics

Those with good and relevant experience can look forward to Senior Lecturer or equivalent positions, with career development opportunities to leadership positions in the Colleges or Headquarters.

Applicants may check their application status at the end of 8 weeks from the closing date of this job posting.