Total 322 maintenance repair job vacancies in Others category in Australia

Runs an efficient and profitable service department through produtive staffing , customer retention ,cost controls , acheivement of objectives , and maintenance of all service records.

Ensures that the daily inventory of techincians's time is consistently sold to service customer.

Develops and implements a marketing plan which promotes new and repeat business.

Understands and ensures compliance with manufacturer warranty and policy procedures.

Directs and schedules the activies of all department employees.

Duties & Responsibilities:
(1) Uses a wide variety of inspection techniques to inspect standard electronic systems such as radar, radio communications receivers, and transmitters (single band, UHF and VHF), mobile subscriber equipment (MSE), missile guidance systems, laser range finders, and electronic fire control systems. In addition, may inspect heavy mobile artillery, small arms, powered support, optical, and other equipment or components of equal or lesser complexity.

(2) Conducts inspections, diagnoses nature and extent of equipment malfunction, and as required, performs required maintenance to restore to a serviceable condition various types of tactical computers, radio sets, etc. Uses various types of test equipment such as systems tests sets, frequency meters, standing wave indicators, oscillators, AN/GRM-122s, and other electronic testing devices to inspect equipment and components. Inspects equipment when received to determine repairs needed and parts required.

(3) Inspects equipment to determine repairs needed. Utilizes established Maintenance Expenditure Limits (MEL) to evaluate economic feasibility of repair(s). Considers a variety of factors such as cost and availability of parts, man-hours, and impact of time constraints on the mission to assess whether repair is economical. Recommends to a higher echelon to condemn equipment when the repair cost exceeds the established MEL. Prepares lists of needed repairs, parts, and man-hours authorized. Performs in-process inspections to assure that equipment is being repaired in accordance with pertinent requirements. Performs final inspection, certifying that equipment is in satisfactory operating condition, or rejects the work and returns the equipment to the repair shop with specific reports prescribing additional repairs.

(4) Inspects the full range of equipment as described above at remote worksites in support of field organizations, field units during field exercise training periods, or before major pieces of equipment are sent for repair to a supporting maintenance facility. Serves as inspector on Command Maintenance Evaluation Teams (COMET) and/or as a member of Maintenance Assistance and Instruction Teams (MAIT).

(5) Performs other as duties as assigned.

This is a traineeship program that will offer an opportunity for ITE or Diploma fresh graduates to obtain knowledge from structured training and OJT to gain work experience that will accelerate their technical competency and career progression in GE Aerospace.

The trainee will be responsible to set up and operate machines such as CNC machines in Milling, Grinding and Lathe; Electrical Discharge Machine (EDM); Surface Grinding; VT Lathe and various conventional machines and specialized equipment to perform machining operations. 

Essential Responsibilities:

• Set up and operate all types of conventional or CNC machines such as electrical discharge machine, laser machine, lathe, radial grinder, reciprocal grinder, milling machine, drilling machine, and specialized equipment to perform machining operation of the most complicated nature in the making of jigs, fixtures, tools, dies, gauges, test equipment and product parts, and their rework or modifications
• May follow a particular product through the machine shop using a variety of machine tools to complete the finished product
• Use all types of standard and special gauges, various hand tools
• Maintain pertinent records; work according to technical drawings and instructions
• Perform scheduled maintenance & housekeeping tasks
  

Qualifications/Requirements:

• Nitec/Higher Nitec in Automation Engineering / Aircraft Engines Maintenance / Mechanical Engineering / Mechatronics Engineering / Aircraft Maintenance Engineering
• Diploma in Aerospace Engineering / Mechatronics / Aeronautical Engineering / Aerospace Technology / Aerospace Avionics
• Any relevant Nitec / Higher Nitec / Diploma engineering courses
• Able to read and understand the manufacturing operation sheets and standard operation procedures in English
• Able to work rotating shifts
• Willing to accept a 1-year bond after the program
• Within 3 years of graduation OR the operationally ready date (ORD) for national servicemen
• Singaporean/Singapore PR only in order to meet Singapore government requirements for a strong Singapore core and for the Singapore government grants to be applicable.

Desired Characteristics:

• Good mechanical aptitude
• A team player
• Humble: respectful, receptive, agile, eager to learn
• Transparent: shares critical information, speaks with candor, contributes constructively
• Focused: quick learner, strategically prioritizes work, committed
• Leadership ability: strong communicator, decision-maker, collaborative
• Problem solver: analytical-minded, challenges existing processes

This is a traineeship program that will offer an opportunity for ITE or Diploma fresh graduates to obtain knowledge from structured training and OJT to gain work experience that will accelerate their technical competency and career progression in GE Aerospace.

The trainee will perform visual and dimensional inspection to written quality plans on incoming in-process and finished engine components. 

Essential Responsibilities:

• Ensure quality of parts meet specification requirements
• Ensure proper work clearance, correctness, and completeness
• Prevent non-conforming parts from proceeding to the next work station
• Provide support to Manufacturing Engineers and Quality System Engineers for evaluations, audits related activities
• Collect data, feedback on the quality of parts inspected to the Manufacturing Engineers and Quality System Engineers
• Perform visual & dimensional inspections, and set area management of the parts
• Perform scheduled maintenance & housekeeping task

Qualifications/Requirements:

• Nitec/Higher Nitec in Automation Engineering / Aircraft Engines Maintenance / Mechanical Engineering / Mechatronics Engineering / Aircraft Maintenance Engineering
• Diploma in Aerospace Engineering / Mechatronics / Aeronautical Engineering / Aerospace Technology / Aerospace Avionics
• Any relevant Nitec / Higher Nitec / Diploma engineering courses
• Able to read & write English at a professional working proficiency level
• Able to work rotating shifts
• Computer literacy in Microsoft Office
• Willing to accept a 1-year bond after the program
• Within 3 years of graduation OR the operationally ready date (ORD) for national servicemen
• Singaporean/Singapore PR only in order to meet Singapore government requirements for a strong Singapore core and for the Singapore government grants to be applicable.

Desired Characteristics:

• A team player
• Humble: respectful, receptive, agile, eager to learn
• Transparent: shares critical information, speaks with candor, contributes constructively
• Focused: quick learner, strategically prioritizes work, committed
• Leadership ability: strong communicator, decision-maker, collaborative
• Problem solver: analytical-minded, challenges existing processes, critical thinker

(1) Directs, monitors or performs overall maintenance, servicing, inspections and documentation for one or more aircraft. Work is performed in complex working conditions under time and/or mission constraints to include all weather and night operations. Works with, coordinates and oversees the work of subordinate aircraft mechanics. Coordinates and oversees the work of journey level workers in other trades working simultaneously on the assigned aircraft. Reviews, trains and prepares to perform battle damage assessment/repair. Participates in mission generation/regeneration operations. Directs multiple specialists in preparing aircraft for combat operations. Expedites aircraft operations to include concurrent servicing, hot pit refueling and/or combat turns or integrated combat turns. Performs preflight, postflight, thru flight, periodic, isochronal, phase, hourly and special inspections, as well as servicing, defueling, scheduled and unscheduled maintenance. Serves as the technical authority to advise on, inspect and approve all airframe, mechanical, electrical/environmental, avionics, engine and pneudraulic repairs on assigned aircraft. Works closely with the production control function to report current aircraft status, requests and coordinates specialist support for accomplishing maintenance exceeding sortie generation capabilities or time constraints. Controls and performs work assignments based upon priorities, workload, availability of parts, facilities, material and personnel. Assigns maintenance and repair functions to subordinate mechanics. Coordinates with production control to direct short notice availability of the aircraft to accomplish work on delayed discrepancies and other scheduled maintenance to meet mission requirements. Observes and inspects performance and work procedures to ensure compliance with applicable technical publications, directives and local policy. Accomplishes operational tests of aircraft systems and components. Directs and performs the ground movement of aircraft. Launches, recovers, parks and services aircraft. Performs end of runway inspection. Installs, removes, inspects and adjusts aerial delivery systems to mission requirements. Makes diagnoses and solves malfunctions of aircraft systems and components by utilizing a wide variety of complex state of the art computerized and/or non computerized diagnostic and precision equipment, by studying layout drawings, blueprints and wiring diagrams and by analyzing construction and operating characteristics of aircraft and their components. Performs or oversees maintenance such as troubleshooting, removing, repairing, replacing, rigging, aligning, cleaning, painting and corrosion control. Ensures all mission associated support (-21) equipment is available and serviceable for deployment and employment. (2) Ensures aircraft documentation and Maintenance Information Systems accurately reflect the airworthiness of the Aircraft. Provides technical guidance and assistance to flight crews regarding observed discrepancies and experienced in-flight characteristics and system malfunctions. Performs or assists in aircrew debriefing when required. (3) Performs in-process and final inspection of aircraft and components undergoing repair, overhaul and/or modification to verify and certify by signature adherence to work techniques, procedures and quality standards established by applicable publications. Completed work is reviewed for adherence to maintenance policy independently to determine that the aircraft is prepared and safe for flight. Due to the nature of operations tempo, must make decisions on a wide range of matters that may involve changes to past precedents to ensure completion of the mission. Clears Red X symbols on aircraft forms, accomplishes or directs engine power runs, may taxi aircraft in accordance with applicable directives. (4) Plans, develops and conducts training during the technician work week to a multi facet workforce comprised of from 3 to 8 assigned military positions. Training sessions are designed to provide instructions in techniques of repair and maintenance of aircraft and related equipment. Conducts and certifies Cross Utilization Training of non WG-88XX series Aircraft Mechanics to meet mission requirements. Selects the appropriate instructional method, utilizing either formalized classroom or practical on-the-job method of instruction. Evaluates and certifies effectiveness of training by observation as the trainee performs the task(s). Determines experience and skill level of assigned personnel. Maintains Career Field Education and Training Plan for assigned members. (5) Prepares for and participates in various types of readiness evaluations, inspections, mobilization and command support exercises and Operations Other Than War. (6) Complies with safety, fire, security, environmental and housekeeping regulations. Ensures that material and equipment are properly and safely protected and maintained.

• Construct, maintain, and repair various project and public use facilities.
• Construct and repair project signs, boat docks, forms for concrete, building remodeling, etc.
• Paint new or repaired operating equipment and machinery, buildings, signs, etc.
• Perform welding (arc and gas) tasks needed to facilitate major repair of project equipment and structures.
• Maintenance work includes repairing interior and exterior trim, doors, windows, gutters, shingle roofs, floors, etc., painting as required.
• Operate and maintain miscellaneous equipment: mowers, brush chipper, stump chipper, gas powered hand tools; i.e., chain saws, brush cutters, etc., air compressors, power saws and miscellaneous power hand tools

As a MAINTENANCE MECHANIC, you will:

• Install, modify, or repair high-pressure piping systems and equipment such as steam heating, steam generators, hot water and hydraulic systems, radiators, and vacuum pumps, condensate pumps, and circulating pumps. Plan routing, placement and pitch; determine proper valve, pressurizing regulators, and expansion joints; install braces and support to control movement and vibration, allowing for expansion and contraction.
• Fabricate, install and maintain sheet metal equipment and fixtures such as machine guards, shelves, coin stands, ventilators, chutes, bulkheads, ducts, metal roofing, flashing, and hoppers. Work involves design, layout, set up, and the utilization of a variety of equipment and hand tools such as drill press, hand braker, hand nibler, squares, and shears.
• Perform oxyacetylene, gas carbon-arc. Tig arc, and heliarc welding, brazing, soft and silver soldering, flame and arc burning and cutting to fabricate, maintain and repair a variety of items such as piping, tubing, machine parts, and structures. Weld such metals as aluminum, stainless steel, mild steel, cast iron, bronze, brass, copper and various alloys including dissimilar metals such as brass to steel, black iron to stainless steel, and galvanized steel to black iron.
• Erect, alter, repair or remove interior walls and partitions of various composition, such as wood and metal studding and bracing, sheetrock, wood and other paneling materials. Install, repair or replace wood and metal window framing, doors, door jams, baseboards, molding, transoms, and panels.

This is an open continuous announcement. Applications will be reviewed on the established cut dates: 12/4/2024, 1/6/2025, 2/5/2025 and at the closing date (dates are subject to change). Non-Selected Applicants must update their application information to be considered for the next cut.

As a MAINTENANCE MECHANIC, you will:

• Install, modify, or repair high-pressure piping systems and equipment such as steam heating, steam generators, hot water and hydraulic systems, radiators, and vacuum pumps, condensate pumps, and circulating pumps. Plan routing, placement and pitch; determine proper valve, pressurizing regulators, and expansion joints; install braces and support to control movement and vibration, allowing for expansion and contraction.
• Fabricate, install and maintain sheet metal equipment and fixtures such as machine guards, shelves, coin stands, ventilators, chutes, bulkheads, ducts, metal roofing, flashing, and hoppers. Work involves design, layout, set up, and the utilization of a variety of equipment and hand tools such as drill press, hand braker, hand nibler, squares, and shears.
• Perform oxyacetylene, gas carbon-arc. Tig arc, and heliarc welding, brazing, soft and silver soldering, flame and arc burning and cutting to fabricate, maintain and repair a variety of items such as piping, tubing, machine parts, and structures. Weld such metals as aluminum, stainless steel, mild steel, cast iron, bronze, brass, copper and various alloys including dissimilar metals such as brass to steel, black iron to stainless steel, and galvanized steel to black iron.
• Erect, alter, repair or remove interior walls and partitions of various composition, such as wood and metal studding and bracing, sheetrock, wood and other paneling materials. Install, repair or replace wood and metal window framing, doors, door jams, baseboards, molding, transoms, and panels.

Porter (Maintenance)

Guildford Hospital | Property and Facilities | Permanent | Full Time

£23,887.50 per annum

37.5 hours per week

Are you good with people? Do you feel comfortable with physical work, like pushing beds and lifting heavy equipment? Do you like to be outside some of the time? If so, this is a fantastic opportunity to join the UK's largest Healthcare Charity, where you can enjoy a highly rewarding role. We're taking care of the nation's health and it starts with you.

As a Porter (Maintenance) at our Guildford Hospital, you'll need to be a good communicator, as this role involves helping our patients to feel relaxed and reassured, from the moment they enter the carpark until they leave after their treatment. It's also essential that you're happy to undergo our Disclosure and Barring Service (DBS) checks, as part of your application.

As a Porter (Maintenance), you will:

• Be part of a close-knit professional team.

• Collect and return patients to their individual rooms, on arrival and after other departments for tests and scans.

• Work with your colleagues to ensure that the hospital environment is clean, safe and welcoming.

• Ensure the car park and hospital grounds are utilised in the most efficient way, neatly kept and safe.

• Work in a conscientious methodical manner to ensure all aspects of the job are carried out to support the clinical staff in the most effective manner.

Helping you feel good.

We want you to love coming to work, feeling healthy, happy and valued. That's why we've developed a benefits package with you in mind. With paid overtime, a cycle to work scheme, financial wellbeing support, gym membership and more - at Nuffield Health, we'll take care of what's important to you.

Nuffield Health Guildford Hospital.

Nuffield Health Guildford Hospital provides high-quality healthcare working with leading Consultants to offer a range of services and treatments for preventing, diagnosing and treating a wide array of medical conditions and offer a wide range of complex surgery and services. Our care is matron led and we are proud to have received a "good" rating from the health care regulator, the Care Quality Commission (CQC).

Our facilities include 49 en-suite patient bedrooms, 4 operating theatres, pathology labs and oncology units. We've been awarded the Macmillan Quality Environment Mark for cancer care. Our site is shared with an NHS Trust hospital, giving us access to their facilities. The working atmosphere is highly professional and stimulating, yet friendly and collaborative like that of a large family unit.

The hospital is easily accessible from the A3 less than 1 mile away which links to M3 or M25 and we are located about 1.5 miles from Guildford town centre.

Join Nuffield Health and create the future you want, today.

If you like what you see, why not start your application now? We consider applications as we receive them and reserve the right to close adverts early (for example, where we have received an unprecedented high volume of applications). So, it's a good idea to apply right away to ensure you're considered for this role.

It starts with you.

-Accomplishes quality assurance inspections.
-Debriefs customers/vehicle operators and performs incoming inspections on special purpose, heavy, general purpose type vehicles and vehicular equipment.
-Performs heavy mobile equipment and automotive mechanic work.
-Utilizes established practices, procedures, and regulations regarding safety, security, and environmental issues; maintains safe and clean work environment; participates in assigned shop upkeep efforts; completes all required reports, forms, work orders, inspection and certification forms, and time sheets; and participates in productivity measurement studies, evaluations, and assessments.
-Establishes and maintains good working relationships.

• You will operate electrical test equipment (e.g., voltage detectors, multimeters) to determine the presence of electrical energy.
• You will conduct visual inspections and operational tests to determine the need for maintenance or repair work.
• You will lay out job systems and components from blueprints and sketches in compliance with federal, state, and local codes.
• You will follow instructions specified in work orders to perform maintenance and repair work.

• You will utilize preventive maintenance, inspection, troubleshooting and adjustment of mechanical, electrical, hydraulic, and pneumatic equipment located at a wastewater treatment plant.
• You will replace various types of pumps, valves, hydraulic cylinders, conveyors, gas driven engines, gears, motors, wheel bearings, and other related components.
• You will Install, maintain, troubleshoot, and repair power supply and distribution panels, fixture motors, generators, variable speed pump dives, pneumatic sewage ejectors, pressure switches, and all types of liquid level sensors and controllers.
• You make operational adjustments, preventative maintenance, corrective maintenance, realignment of motors, gears, wheels, shafts, bearings, and similar parts.

• Performs the simpler aµd more routine tasks of the plumbing trade.
• Performs simpler and more routine carpentry duties.
• Performs simpler and more routine duties of the air conditioning equipment trade.
• Provides support for all crafts in the Operations and Maintenance(O&M) section.
• Utilizes safety practices and procedures following established safety rules and regulations and maintains a safe and clean work environment.