Total 41 job vacancies by Air National Guard Units

As an Aircraft Engine Mechanic, WG-8602-10, you will:

• Remove, install, certify, repair, modify, overhaul, and install turboprop engines, reduction gear boxes, turbine modules, compressor modules, auxiliary power units, propellers and related propeller components as required. Perform maintenance on all propulsion systems including troubleshooting and diagnosing defects, certifying, conducting bench checks, performing in-shop and on-equipment repairs and overhaul. Diagnose malfunctions using computerized test equipment, schematic diagrams, technical publications and perform the appropriate repair according to the test results and analysis. Determine the extent of disassembly necessary to repair, overhaul, replace and certify all engine, propeller and auxiliary power unit parts. Clean and inspect engine and propeller component parts such as turbines, gearboxes, blades, gears, bearings, etc. Assemble engines, propellers and auxiliary power units, adhering to prescribed procedures, torque values, safety methods and clearances. Troubleshoot propellers using electric and hydraulic test stands to check for proper operation and evidence of oil leakage. Operationally check engines and propeller assemblies and auxiliary power units, by using the engine test cell facility to meet all full power run checks on the engine and propeller assemblies and auxiliary power units.
• Modify engines, propellers, auxiliary power units, and components in accordance with Time Compliance Technical Orders (TCTO) directives; remove and install engine quick change kits; prepare engines for installation and install engine and propeller assemblies on aircraft. Evaluate technical problems of repair, overhaul, modification and installation of aircraft propulsion systems. Solve all types of maintenance problems and perform bench checks and test engine and propeller assemblies for serviceability.
• Perform operational checks of installed propellers, engines, auxiliary power units and sub-systems during aircraft maintenance ground runs in accordance with approved checklists. Employ test equipment such as computer borescope, fuel pressure gauges, air pressure gauges, and alignment fixtures. Utilize special tools and precision measuring equipment, high-pressure hydraulic test equipment, and electronic test equipment.
• Perform isochronal and special evaluations on engines, propellers and auxiliary power units. Interpret certification findings and determine adequacy of corrective action. Certify installed and repaired engines for compliance with technical publications. Perform fixed and mobile test stand functions (which may include maintenance of engine test cell facility); install special test equipment; perform pre-operational and post operational checks. Operate engines and propellers and record test data. Operate, certify, and maintain computerized engine test/trim automated systems (ETTAS) on the engine test cell. Evaluate, identify and correct problems on propeller and engine components causing vibration or impending failure using the ETTAS system, and vibration analyzer. Evaluate engine and propeller performance by computing engine torque and specific fuel consumption. Monitor engine RPM and turbine inlet temperatures. Evaluate engine and propeller performance and accept or reject the individual components. Remove engine and propeller from test stand and prepare units for aircraft installation or storage. Accomplish operator maintenance on the aircraft and engine sound suppressor facility, test stands and various pieces of ground equipment, including the auxiliary power unit test cell. Perform dynamic propeller balancing and test the propeller integrated synchophasing. Test variable potentiometers, servo-motors, indicators and aircraft wiring.
• Perform aircraft full power runs and complete engine and propeller efficiency checks. Clear Red X symbol documentation on engine and propeller related components. Prepare man-hour data collection and required forms for input into the Core Automated Maintenance System (CAMS) or the G081 (AFI 22-2101, CAMS for Mobility). Review and assist in maintaining Technical Orders (TOs) and other technical publications and directives pertinent to the element. Maintain bench stock, parts, and equipment. Assist the material control function in identifying part numbers and stock numbers for processing and controlling of repair cycle assets. Provide on-the-job training for assigned personnel. Plan and conduct formal classes of instruction in techniques of repair and maintenance of aircraft engine, propeller, auxiliary power unit, and related equipment and in the use of diagrams, blueprints, wiring schematics and technical publications. Evaluate effectiveness of training by observation and through written and oral examinations. Advise supervisor of the experience and skill levels of assigned personnel. Maintain training documentation.
• Perform other duties as assigned.

Planning: Plans weekly or monthly work schedules and sequence of operations. Establishes deadlines and priorities based on established general schedules, methods and policies. Determines skills, materials and equipment required to do the work. Participates in the initial planning of current and future work schedules and development of budget requests. Provides workload data, estimates, information on staffing needs, and recommendations as the scheduling of projected work. Work Direction: Assigns tasks to be performed. Explains work requirements, methods, and procedures. Instructs subordinates on new procedures or methods and provides assistance on difficult or new problem areas. Reviews work in progress or on completion. Makes adjustments as necessary to effectively and economically accomplish the work. Notes and investigates work related problems and independently implements corrective actions which can be taken without affecting work operations controlled by other supervisors. Assures that equipment and materiel is available when needed. Coordinates work with other units. Administration: Recommends and participates in the selection of personnel to fill vacancies. Schedules and approves leave of subordinates. Sets performance requirements and makes formal and informal performance appraisals. Determines training needs of subordinates and arranges for its accomplishment. Counsels employees on problems. Adjusts informal complaints through discussions with employees and union representatives. Takes informal corrective action on conduct or performance problems. Initiates proposals for disciplinary action where needed. Works to achieve the objectives of Government-wide programs and policies, e.g., equal employment opportunity and labor management relations. Promotes the participation of subordinates in programs such as the suggestion program, cost reduction program, etc. Ensures that regulations governing safety and housekeeping are observed with appropriate protective clothing and equipment being utilized. Maintains production reports and records. Periodically reviews position descriptions of subordinates for currency and accuracy. Initiates the detailing of subordinates to positions other than their own. Initiates or participates in review and improvement of work methods, organizationalfeatures, and the structuring of positions to eliminate unnecessary positions and achieve optimum content in those remaining. Performs the nonsupervisory work of the function as needed. Implements regulatory safety requirements and ensures that subordinates wear appropriate safety equipment and follow pertinent safety precautions. Prepares for and participates in various types of readiness evaluations, inspections, mobilization and command support exercises. May be required to perform such additional duties as structural fire fighting, aircraft fire/crash/rescue duty, security guard, snow removal, munitions loading and handling, heavy equipment operation, maintenance of facilities and equipment, or to serve as a team member on boards to cope with natural disasters or civil emergencies.

(1) Directs, monitors or performs overall maintenance, servicing, inspections and documentation for one or more aircraft. Work is performed in complex working conditions under time and/or mission constraints to include all weather and night operations. Works with, coordinates and oversees the work of subordinate aircraft mechanics. Coordinates and oversees the work of journey level workers in other trades working simultaneously on the assigned aircraft. Reviews, trains and prepares to perform battle damage assessment/repair. Participates in mission generation/regeneration operations. Directs multiple specialists in preparing aircraft for combat operations. Expedites aircraft operations to include concurrent servicing, hot pit refueling and/or combat turns or integrated combat turns. Performs preflight, postflight, thru flight, periodic, isochronal, phase, hourly and special inspections, as well as servicing, defueling, scheduled and unscheduled maintenance. Serves as the technical authority to advise on, inspect and approve all airframe, mechanical, electrical/environmental, avionics, engine and pneudraulic repairs on assigned aircraft. Works closely with the production control function to report current aircraft status, requests and coordinates specialist support for accomplishing maintenance exceeding sortie generation capabilities or time constraints. Controls and performs work assignments based upon priorities, workload, availability of parts, facilities, material and personnel. Assigns maintenance and repair functions to subordinate mechanics. Coordinates with production control to direct short notice availability of the aircraft to accomplish work on delayed discrepancies and other scheduled maintenance to meet mission requirements. Observes and inspects performance and work procedures to ensure compliance with applicable technical publications, directives and local policy. Accomplishes operational tests of aircraft systems and components. Directs and performs the ground movement of aircraft. Launches, recovers, parks and services aircraft. Performs end of runway inspection. Installs, removes, inspects and adjusts aerial delivery systems to mission requirements. Makes diagnoses and solves malfunctions of aircraft systems and components by utilizing a wide variety of complex state of the art computerized and/or non computerized diagnostic and precision equipment, by studying layout drawings, blueprints and wiring diagrams and by analyzing construction and operating characteristics of aircraft and their components. Performs or oversees maintenance such as troubleshooting, removing, repairing, replacing, rigging, aligning, cleaning, painting and corrosion control. May be required to assist DEPOT level maintenance activities on individual assigned aircraft discrepancies. Ensures all mission associated support (-21) equipment is available and serviceable for deployment and employment.

(2) Ensures aircraft documentation and Maintenance Information Systems (MIS) accurately reflect the airworthiness of the Aircraft. Provides technical guidance and assistance to flight crews regarding observed discrepancies and experienced in-flight characteristics and system malfunctions. Performs or assists in aircrew debriefing when required.

(3) Performs in-process and final inspection of aircraft and components undergoing repair, overhaul and/or modification to verify and certify by signature adherence to work techniques, procedures and quality standards established by applicable publications. Completed work is reviewed for adherence to maintenance policy independently to determine that the aircraft is prepared and safe for flight. Due to the nature of operations tempo, must make decisions on a wide range of matters that may involve changes to past precedents to ensure completion of the mission. Clears Red X symbols on aircraft forms, accomplishes or directs engine power runs, may taxi aircraft in accordance with applicable directives.

(4) Plans, develops and conducts training during the technician work week to a multi facet workforce comprised of from 3 to 8 assigned military positions. Training sessions are designed to provide instructions in techniques of repair and maintenance of aircraft and related equipment. Conducts and certifies Cross Utilization Training (CUT) of non WG-88XX series Aircraft Mechanics to meet mission requirements. Selects the appropriate instructional method, utilizing either formalized classroom or practical on-the-job method of instruction. Evaluates and certifies effectiveness of training by observation as the trainee performs the task(s). Determines experience and skill level of assigned personnel. Maintains Career Field Education and Training Plan (CFETP) for assigned members.

(7) Performs other duties as assigned.

The purpose of this position is to provide munitions support to the state and designated agencies in support of their taskings. This dual status technician position requires military membership.

MAJOR DUTIES:

1. Production Section is comprised of Precision Guided Munitions (PGM), Conventional Maintenance, Line-Delivery and Munitions Support Equipment Elements. Assembles/Disassembles, adjust configuration, performs maintenance/test & repair, handles and transports ammunition, rockets, unguided and guided weapons and countermeasures, demolition material, and other types of conventional ordnance such as 40MM, Cluster Bomb Units (CBU), Guided Bomb Units (GBU), general purpose bombs, aircraft canon ammunition, missile systems, decoys, countermeasures to include LUU series flares and dispensers for loading on aircraft based on Unit Committed Munitions List (UCML) and Wings training requirements. Independently troubleshoots electrical/mechanical faults of integrated systems by thoroughly analyzing operating trends. Perform Pre/Post Flight inspection and flight line return inspections. Assigns Weapon Stock Number (WSN) and records builds and teardowns of complete rounds in the accountable property system of record (APSR). Applies determined criteria utilizing fusing and arming systems; technical drawings; precision measuring tools and equipment; wiring diagrams; rigid specifications and close tolerances to examine ordnance systems using a variety of standard precision instruments, gauges and methods. Performs maintenance on electrical, pneumatic, and high pressure air tanks subsystems and assemblies. Configures Munitions Material Handling Equipment (MMHE) for mission support. Delivers in a safe configuration, MMHE/munitions between assembly/staging areas and aircraft parking ramps. Validates expenditure and movement documentation for munitions reconciliation and expenditure reporting. Performs and certifies, armament and support equipment serviceability inspections. Maintains and repairs MMHE for all work orders assigned to maintenance actions. Performs inspections on armament, support, and associated test equipment using a wide variety of processes and techniques. Troubleshoots electrical systems on support equipment for fault isolation IAW electrical wiring schematics, repairs/replaces as required. Repairs/rebuilds hydraulic braking systems and surge brake components on MMHE to include fabrication/bending/routing of brake lines. Prepares, maintains, and updates historical serviceability and maintenance records. Establishes and maintains bench stock and operational stock program. Interprets pilot deficiency reports for missile systems to independently establish repair procedures. Repairs, maintains, and tests functionality and interconnections of electromechanical servo systems, pneumatic, hydraulic, mechanical, and electric motor systems in missile and decoy platforms. Documents PGM serviceability in enterprise wide database Tactical Munitions Reporting System (TMRS) for equipment specialist review and trend data analysis. Coordinates with Air Logistics Complex (ALC) Special Program Offices (SPO) with Time Compliance Technical Order (TCTO) reporting, software/mapping updates and deficiency reporting.

2. Materiel Section is comprised of Operations, Inspections and Stockpile Management Elements. Manages allocations, stock levels, inventories, requisitions, and disposition of munitions. Validates, maintains, and provides security of accountable/auditable records. Ensures segregation of duties is maintained both physically and within the accountable property system of record (APSR). Manages excess munitions program. Coordinates scheduling of complete, custody, special munitions inventories and compiles inventory adjustment packages as required. Notifies the Munitions Accountable Systems Officer (MASO) and munitions supervision if information or data suggests mismatches, negligence, fraud, or theft involving munitions accountability. Implements forecasting and allocation procedures for munitions levels. Coordinates with the Munitions Inspection and Storage/ Handling Elements prior to requisitioning assets for inclusion in the Master Storage Plan. Establishes and maintains the munitions inspection program; approved marking, packaging, and seals; shelf and service life monitoring program; and certifies munitions residue for all munitions assets. Manages and maintains munitions storage area infrastructure and facilities, vehicles, and equipment to ensure mission support. Stores bulk stock and operationally configured or built-up munitions. Conducts and documents a 100-percent movement validation of all direct-input and remote-input physical movements against processed munitions transactions. Prepare and schedule munitions for shipment. Develops, maintains, and utilizes a Master Storage Plan.

**REFER TO PD FOR FULL LIST OF DUTIES/RESPONSIBILITIES**

JOB SUMMARY: The purpose of this position is to serve as the Base Information Assurance Manager who is the wing commander's authority and focal point for Information Assurance. Manages the communication-computer security (COMPUSEC) program, Electronic Key Management System (EKMS), Emission Security, and Information Assurance Awareness Programs.

NATIONAL GUARD MEMBERSHIP IS REQUIRED. This is an excepted position that requires membership in a compatible military assignment in the Connecticut Air National Guard. Applicants who are not currently a member of the Connecticut Air National Guard must be eligible for immediate membership and employment in the Connecticut Air National Guard. If you are not sure you are eligible for military membership, please contact a Connecticut Air National Guard recruiter at (860) 292-2331 before applying for this position.

The major duties include, but are not limited to:

• Serves as the Wing Information Assurance Manager.
• Manages the Network Security Program.
• Serves as the Communications Security (COMSEC) Manager for all cryptographic activities including managing the Cryptographic Access Program (CAP).
• Implements and manages the Electronic Key Management System (EKMS) program.
• Adheres to management control plan requirements by conducting self inspection and staff assistance visits.

As a AIRCRAFT MAINTENANCE SUPERVISOR, WS-8801-14, duties include:

(1) Planning: Plans the overall allocation of personnel, funding and equipment resources to the organizational segments supervised to accomplish work operations which, because of their scope, volume, complexity, operational tempo, and total force integration must be planned on an annual or longer basis. Because of the Total Force Mission integration with the USAF, keeps unit assigned Air National Guard mission aircraft in combat ready status and able to be fully integrated with USAF aircraft and missions upon activation and regular contingency operations, in addition to daily training and support missions. Plans work on an annual or multiyear basis, to include: aircraft and aircraft system modifications (Time Change Technical Orders),maintenance equipment and facilities update and modernization, deployment and mobility planning, human resources and financial forecasting, recurring Air Force mandated inspection requirements, mission and weapons systems changes, contingency planning relating to carrying out the military mission of the wing, and the development of policies and procedures in the accomplishment of the work. Significant but shorter requirements involve daily, weekly, and quarterly planning. Analyzes work plans developed by subordinate supervisors for accomplishment of assigned directives. Determines status of work accomplished in relation to future demands, including unanticipated or emergency requirements mandating reallocation of resources as required. Provides higher level management and/or leadership information on status of work projects, budget estimates, changes in equipment, facilities, techniques etc. for mission planning purposes. Evaluates potential impact of improved technologies on existing programs and practices and recommends proposed changes to cognizant authority. Participates fully with higher level management and staff organizations in interpreting changing environmental requirements to include work techniques, specification changes, standard improvements, modifications to organizational structures, mission alignments and changes, equipment modernization, facility requirements and improved workflow processes. Functions as an integral member of unit's planning process, serving as the responsible technical resource for a maintenance division. Has national level impact, attending future systems road map planning conferences such as Product Improvement Working Group (PIWG), System Supportability Review (SSR) and Systems Safety Group (SSG) meetings as an Air National Guard subject matter expert.

(2) Work Direction: Explains work requirements to subordinate levels of supervision, sets deadlines and sequence of operations. Coordinates and directs the work of units supervised. Balances work load for subordinate work groups. Analyzes production, cost and personnel utilization records and makes adjustment in operations to correct problems. Develops quality and quantity standards. Spot checks work operations to assure production and quality standards are met. Encourages employees to achieve goals.

(3) Administration: Recommends promotion or reassignment of subordinate supervisors and reviews personnel actions prepared by them. Makes formal appraisal of supervisors' work performance and reviews employee appraisals submitted by them. Determines long-range training needs for all levels of subordinates, submits funding and budget requests with justification for approval, and arranges for the accomplishment of the training. Promotes and administers such programs as cost reduction, incentive awards, suggestions, and quality assurance. Ensures that regulations governing safety and housekeeping are observed with appropriate protective clothing and equipment being utilized. Assures that subordinate supervisors carry out such programs as labor-management and equal opportunity. Schedules and approves leave. Ensures that position descriptions are accurate and that position management principles are followed. Develops and establishes the internal procedures to be followed by subordinate supervisors to assure effective control and direction of the work activities, organizations, and personnel supervised. Assures that appropriate
production reports and administrative records are maintained. Acts on personnel problems referred by subordinate supervisors. Hears and resolves grievances and ensures proper corrective action is taken.

(4) Implements regulatory safety requirements and ensures that subordinates wear appropriate safety equipment and follow pertinent safety precautions.

As a HEAVY MOBILE EQUIPMENT MECHANIC, WG-5803-8/10, duties include:

1. Repairs, adjust, overhauls, performs major repairs, and maintenance on military and commercial designed heavy mobile equipment and special purpose vehicles. Inspects repairs, overhauls and tests major systems including gasoline, diesel, electric powered hybrid, multi-fuel, turbine, and other types of internal combustion engines, which may be turbo-charged or blower assisted, automatic or manual transmissions, including those with power take offs, cross-drive transmissions, hydraulic, electric, pneumatic systems and controls, fluid pumping systems, turrets, winches and four-wheel steering systems. Systematically analyzes malfunctions and the cause of mechanical failure by means of visual and auditory checks, uses computer-controlled test equipment, engine analyzers, compression testers, voltmeters, ohmmeters and pressure gauges in order to determine the exact nature of extent of repairs or adjustments necessary to complete work. Use specialized diagnostic equipment to troubleshoot problems in complex state-of-the-art electric and electronic systems to identify and replace defective components such as computer control modules, sensors, solenoids, digitized components, and circuits. Develop or improvise methods, alter parts, and make repairs in the absence of technical guidelines. Modify parts to fit or improvises modifications to equipment to correct recurring malfunctions. Makes design modifications to meet special requirements, make adjustment or performs tests. Removes, disassembles overhauls, modifies, adjusts, and repairs, engines, transmissions, or sub-assemblies in accordance with the proper procedures and specifications. Reassembles engines, transmissions, and sub-assemblies, makes adjustments, tests and reinstalls in vehicles and equipment. Determines serviceability by operational driving test.

2. Performs body repair and corrosion control, refinishes and repaints surfaces as required. Repairs and/or replaces body parts, locks, glass, etc. and determines if additional repairs are required. Repairs may be accomplished by using welding equipment, power tools, hand tools and other specialized equipment. Cleans, tests, and repairs radiators/oil coolers and associated parts. Test, services, and repairs vehicle air conditioning systems following manufacturers and environmental guidelines. Replaces or repairs tires, tubes and balances wheel assemblies.

3. Prepares, maintains and submits applicable maintenance work orders for man-hour and data collection accounting, to include completing forms to reflect work performed or delayed and parts and maintenance required. Assists in establishing and maintaining adequate shop stock, special levels parts, and appropriate shop support equipment and tools. Inspect, maintains, and operates all appropriate shop equipment. Researches and assists in requisitioning materials, parts and equipment necessary to perform the vehicle maintenance/management mission. Assists in review and updating maintenance technical orders, shop operating instructions, commercial publications, MAJCOM and local publications, as well as other pertinent directives. Provides expert support to the Customer Service Center to various unit members.

4. Participates as OJT Instructor in the vehicle maintenance area. Conducts instructional classes on methods and procedures of operation and maintenance concerning all aspects of vehicle repairs and assigned shop maintenance support equipment. Evaluates effectiveness of instruction, documents and maintains individual /section training and qualification records.

5. Assists in conducting the local occupational safety and health training program, to include compliance with directives and procedures for proper disposal of hazardous waste products within the functional area. Fully comprehends and complies with federal, state and local environmental laws and the requirements in Air Force Occupational, Safety and Health Standard (AFOSHSTD).

Performs other duties as assigned.

As a HEAVY MOBILE EQUIPMENT MECHANIC, WG-5803-8/10, duties include:

1. Repairs, adjust, overhauls, performs major repairs, and maintenance on military and commercial designed heavy mobile equipment and special purpose vehicles. Inspects repairs, overhauls and tests major systems including gasoline, diesel, electric powered hybrid, multi-fuel, turbine, and other types of internal combustion engines, which may be turbo-charged or blower assisted, automatic or manual transmissions, including those with power take offs, cross-drive transmissions, hydraulic, electric, pneumatic systems and controls, fluid pumping systems, turrets, winches and four-wheel steering systems. Systematically analyzes malfunctions and the cause of mechanical failure by means of visual and auditory checks, uses computer-controlled test equipment, engine analyzers, compression testers, voltmeters, ohmmeters and pressure gauges in order to determine the exact nature of extent of repairs or adjustments necessary to complete work. Use specialized diagnostic equipment to troubleshoot problems in complex state-of-the-art electric and electronic systems to identify and replace defective components such as computer control modules, sensors, solenoids, digitized components, and circuits. Develop or improvise methods, alter parts, and make repairs in the absence of technical guidelines. Modify parts to fit or improvises modifications to equipment to correct recurring malfunctions. Makes design modifications to meet special requirements, make adjustment or performs tests. Removes, disassembles overhauls, modifies, adjusts, and repairs, engines, transmissions, or sub-assemblies in accordance with the proper procedures and specifications. Reassembles engines, transmissions, and sub-assemblies, makes adjustments, tests and reinstalls in vehicles and equipment. Determines serviceability by operational driving test.

2. Performs body repair and corrosion control, refinishes and repaints surfaces as required. Repairs and/or replaces body parts, locks, glass, etc. and determines if additional repairs are required. Repairs may be accomplished by using welding equipment, power tools, hand tools and other specialized equipment. Cleans, tests, and repairs radiators/oil coolers and associated parts. Test, services, and repairs vehicle air conditioning systems following manufacturers and environmental guidelines. Replaces or repairs tires, tubes and balances wheel assemblies.

3. Prepares, maintains and submits applicable maintenance work orders for man-hour and data collection accounting, to include completing forms to reflect work performed or delayed and parts and maintenance required. Assists in establishing and maintaining adequate shop stock, special levels parts, and appropriate shop support equipment and tools. Inspect, maintains, and operates all appropriate shop equipment. Researches and assists in requisitioning materials, parts and equipment necessary to perform the vehicle maintenance/management mission. Assists in review and updating maintenance technical orders, shop operating instructions, commercial publications, MAJCOM and local publications, as well as other pertinent directives. Provides expert support to the Customer Service Center to various unit members.

4. Participates as OJT Instructor in the vehicle maintenance area. Conducts instructional classes on methods and procedures of operation and maintenance concerning all aspects of vehicle repairs and assigned shop maintenance support equipment. Evaluates effectiveness of instruction, documents and maintains individual /section training and qualification records.

5. Assists in conducting the local occupational safety and health training program, to include compliance with directives and procedures for proper disposal of hazardous waste products within the functional area. Fully comprehends and complies with federal, state and local environmental laws and the requirements in Air Force Occupational, Safety and Health Standard (AFOSHSTD).

Performs other duties as assigned.

THIS IS A T32 EXCEPTED SERVICE, INDEFINITE POSITION

Selectee may be non-competitively converted to permanent status if/when funding becomes available or position becomes unencumbered.

The primary purpose of the GROUP SUPERINTENDENT, GS-0301-11, is to serve as the principal advisor to the group commander for enlisted and other operational matters. The group superintendent provides leadership and management in organizing, training, and equipping assigned airmen (drill-status, Active Guard Reserve, Title 5 employees and Title 32 dual status technicians) in subordinate squadrons to support the Air and Space Expeditionary Forces construct.

May make additional selections within 90 days of eligible(s) issuance.

This position is concurrently announced with AGR VA A24-237. Only one of the announced positions will be filled. Referral and selection will be IAWCNGFPR335.

As a AIRCRAFT MAINTENACE SUPERVISOR, WS-8801-14, this position is located in one of two major divisions within the Logistics Directorate (Logistics Group) of an Air National Guard Flying Wing. Its purpose is to provide overall direction and coordination of subordinate work activities within one of three major work functions (Aircraft Generation Division, and the Equipment Maintenance and the Component Repair Branches of the Aircraft Maintenance Division. All three work functions are organized with a number of subordinate supervisors due to the scope, volume, and complexity of operations. The work involves the total maintenance of complex, high performance military aircraft, ranging from multi-purpose heavy, multi engine transports to the most modern sophisticated fighters and bombers. All aircraft are fully integrated in and are part of the Total Force Mission of the United States Air Force. Occupations supervised are somewhat similar, in that they all involve maintenance of assigned aircraft to ensure combat readiness; they are dissimilar in their organizational location, as well as the functional areas, occupational series, and the diversity and complexity of systems for which each function is responsible. The occupation and nonsupervisory grade which best reflects the overall work operations supervised is Aircraft Mechanic, WG-8852-10.

(1) Planning: Plans the overall allocation of personnel, funding and equipment resources to the organizational segments supervised to accomplish work operations which, because of their scope, volume, complexity, operational tempo, and total force integration must be planned on a annual or longer basis. Because of the Total Force Mission integration with the USAF, keeps unit assigned Air National Guard mission aircraft in combat ready status and able to be fully integrated with USAF aircraft and missions upon activation and regular contingency operations, in addition to daily training and support missions. Plans work on an annual or multi year basis, to include: aircraft and aircraft system modifications (Time Change Technical Orders), maintenance equipment and facilities update and modernization, deployment and mobility planning, human resources and financial forecasting, recurring Air Force mandated inspection requirements, mission and weapons systems changes, contingency planning relating to carrying out the military mission of the wing, and the development of policies and procedures in the accomplishment of the work. Significant but shorter requirements involve daily, weekly, and quarterly planning. Analyzes work plans developed by subordinate supervisors for accomplishment of assigned directives. Determines status of work accomplished in relation to future demands, including unanticipated or emergency requirements mandating reallocation of resources as required. Provides higher level management and/or leadership information on status of work projects, budget estimates, changes in equipment, facilities, techniques etc. for mission planning purposes . Evaluates potential impact of improved technologies on existing programs and practices and recommends proposed changes to cognizant authority. Participates fully with higher level management and staff organizations in interpreting changing environmental requirements to include work techniques, specification changes, standard improvements, modifications to organizational structures, mission alignments and changes, equipment modernization, facility requirements and improved work flow processes.

(2) Work Direction: Coordinates and directs the work of units supervised. Assigns and explains work requirements to subordinate supervisors and sets deadlines. Balances workload for subordinate work groups. Promotes economical and efficient work operations. Analyzes production, cost and personnel utilization records and makes adjustment in operations to correct problems.

(3) Administration: Recommends promotion or reassignment of subordinate supervisors and reviews personnel actions prepared by them. Makes formal appraisal of supervisors' work performance and reviews employee appraisals submitted by them.

(4) Implements safety regulatory requirements. Ensures that subordinates wear appropriate safety equipment and follow pertinent safety precautions.

(5) Prepares for and participates in various types of readiness evaluations, inspections, mobilization and command support exercises, and Operations Other Than War (OOTW).

(6) Performs other duties as assigned.

*The above description only mentions a limited amount of the position's official duties. For a full comprehensive document that covers all the duties of the position, please contact one of the Recruitment Specialists at the bottom of the announcement.

As a PHYSICAL SECURITY SPECIALIST, GS-0080-09, you will be responsible for the management and administration of the Intrusion Detection System (IDS)program. Advises the MAJCOM SF IDS program manager of any base or site activities that will impact the Integrated Base Defense Security Systems (IBDSS) program. This includes, but is not limited to, mission changes resulting in increase or decrease of resources, reconfiguration of resource areas, and construction of facilities on or in the vicinity of current and planned sensor locations. Reports and documents all IDS maintenance requirements to the servicing maintenance organization. Monitors IDS false and nuisance alarms and, when necessary, requests assistance from the maintenance organization to resolve problems and deficiency. Coordinates with maintenance and materiel management functions to ensure sufficient spare parts and maintenance are available to support the IBDSS equipment and component. Other duties as assigned.

Work Schedule: This position works on a 5/4/9 compressed work schedule that consists of a 5-day workweek, then a 4-day workweek (eight 9-hour days and one 8-hour day and an SDO, Scheduled Day Off) to complete the 80-hour pay period. Work schedule is subject to change based on mission requirements.
Telework: ELIGIBLE FOR SITUATIONAL TELEWORK ONLY, INCLUDING EMERGENCY AND PRESCRIBED "UNSCHEDULED TELEWORK"

1. Develops and provides technical loadmaster FTU initial qualification flight training, instruction, and evaluations to all Reserve, Guard, and Active Duty aircrew members. Develops and provides instruction techniques used for various Mission Specific Duties such as: Combat Aircrew Training, Mobile Aerial Port, Night Vision Goggle Operations, Presidential Support Missions, Functional Check Flights, Aeromedical Evacuation, Emergency Airlift of Personnel, Test Certification, Combat Offload, Pyrotechnics Manual Launch Procedures. Training provided includes the full cycle of theory, formal classroom instruction, and actual on the job practice. Develops instructional standards, training plans, tests, lesson plans, and other training material. Develops, establishes, validates, and maintains unit loadmaster training program. Analyzes, interprets, and instructs guidance. Writes and modifies general guidelines from a broad scope of principles, concepts, technology and methodology in order to form a practical lesson plans for flight training and emergency ground egress. Counsels students, evaluates student potential, makes determinations on readiness for evaluation, and recommends/initiates military reclassification actions as appropriate. Evaluates the effectiveness of the training program. Reviews training objectives and determines the scope of training required. Evaluates student performance, annotates and maintains student training records. Ensures students safely execute the demonstrated methods of flight duties. Writes and modifies general guidelines from a broad scope of principles, concepts, technology and methodology in order to form practical lesson plans for flight training and emergency ground egress training. Schedules and conducts training for instructors and flight examiners on instructional methodology, student assessment, and training techniques. Schedules and conducts ground and flight training for qualification and proficiency requirements, encompassing all loadmaster crew duties. Maintains required course documentation/records. Leads or participates in process improvement teams to recommend improvements to instructional methods or processes. Participates in workshops and course reviews. Recommends formal course changes. Provides feedback on courseware and instructional effectiveness through the loadmaster manager/operations officer. Explains and demonstrates the proper method of executing assigned duties during flight.

DUTIES CONTINUED UNDER EDUCATION

(1. Inspects general condition of gasoline and diesel powered vehicles to determine overall vehicle condition, cause of malfunction or need for repair. Diagnoses malfunctions by visual or auditory examination methods. Uses complex test equipment such as engine analyzers, compression testers, voltmeters, ohmmeters and pressure gauges to determine exact nature or extent of repairs or adjustments necessary. Isolates malfunction cause using systematic vehicle analysis. Troubleshoots, inspects, tests and analyzes vehicle computer/electrical control systems, mechanical and hydraulic systems, lubricating, cooling, air conditioning and exhaust systems, engine electrical systems, engine fuel-air systems, electronic/pneumatic controlled automatic transmission and differentials, power dividers, power trains, brakes, steering and suspension systems. Operates general and special purpose vehicles, base maintenance and materials handling equipment, as required to support the unit mission.

2. Performs required repair of gasoline and diesel powered vehicles as assigned, using independent judgment and own initiative on the repair work. Performs Time Compliance Technical Orders (TCTOs) including scheduled and special inspections. Determines when and how far major components should be torn down; what parts and mechanisms can be reworked, refitted, or replaced with new parts and the type, extent and alignment required, using technical orders, commercial manuals or local directives. Removes, rebuilds, repairs, replaces vehicle system components. Adjusts and overhauls engine mechanical systems, state of the art systems, electrical, air conditioning, fuel-air, emission control, power trains, gear reduction systems, electronic/pneumatic controlled automatic transmissions, differentials, power dividers and brakes, steering and suspension system components. Performs operational driving tests to determine serviceability.

3. Performs body repair and corrosion control; repaints and refinishes surfaces as required. Repairs and/or replaces body parts, locks, glass, etc., and determines if additional repairs are required. Uses welding equipment, power tools, hand tools and other specialized equipment. Cleans, tests and repairs radiators/oil coolers and associated parts. Incumbent replaces or repairs tires and tubes and balances wheels.

4. Prepares, maintains and submits maintenance work orders for man-hour and data collection accounting. Records work performed or delayed and parts or maintenance required. Assists in review and maintenance of technical orders, operating instructions, commercial publications, Major Command (MAJCOM) and local publications, as well as other pertinent directives. Assists in establishing and maintaining adequate bench and special stock support levels and appropriate tools and equipment. Uses and maintains shop equipment. Researches or assists in requisitioning materials, parts and equipment necessary to perform the vehicle maintenance/management mission.

5. Participates as On-the-Job Training (OJT) instructor in the vehicle maintenance area. Conducts instructional classes on methods and procedures of operation and maintenance concerning all aspects of vehicles and assigned shop maintenance support equipment. Evaluates effectiveness of instruction, maintains individual and section training and qualification records in the Air Force automated information system (AIS) of record. Plans and schedules tasks and training activities for drill status guard members. Trains assigned drill status guardsmen on the maintenance, repair, and modification of various types of motor vehicles, both gasoline and diesel powered. Develops, establishes and maintains work center training programs to train drill status guard members in mission critical tasks. Conducts unit wide training in environmental issues including Hazardous Communication (HAZCOM), Hazardous Material (HAZMAT) and other environmental related areas. Carries out various duties in support of mobilization readiness of section assigned personnel and equipment. Assists in conducting the local occupational safety and health training program, to include compliance with directives and procedures for proper disposal of hazardous waste products.

Performs other duties as assigned.

(1)Plans, organizes, and oversees the activities of the Quality Assurance Division. Develops goalsand objectives that integrate organization and Quality objectives. Establishes, revises, or reviews policies, procedures, mission objectives, and organization design for the staff, as necessary to eliminate work problems or barriers to mission accomplishment, promote team building, and implement quality improvements in response to concerns with regulatory compliance. Plans work for accomplishment by subordinates, sets and adjust short-term priorities if necessary. Evaluatesrequirements for additional resources. Balances organization needs with overall missionrequirements and resource interests. Identifies need for change in organization priorities and advises the Maintenance Group Commander on required actions to implement such changes. Provides training and experience to the workforce with regard to sound maintenance practices of the aircraft and associated equipment, and knowledge and capability in the military mission, and aircraft. The aircraft are part of the military mission, daily flying training, and support of the assigned Air Force Total Force operations. Manages the maintenance and inspection effort involved in keeping aircraft in an airworthy - combat readiness state, to include capability to carry out daily flying missions and ensure all maintenance operations are executed safely and in accordance with published guidance.

(2) Plans work to be accomplished by subordinates. Makes decisions on work problems presentedby subordinate personnel. Establishes and develops performance standards. Evaluates subordinatepersonnel. Establish employee work schedules, deadlines, and production/inspection priorities basedon aircraft maintenance status, aircraft mission requirements and other demand needs. Determinehow many jobs can be accomplished concurrently with the available manpower and resources.Develops methods and procedures, reviews the work of subordinates in progress and uponcompletion to ensure that they have met the defined quality and quantity standards. Resolvetechnical problems of subordinate personnel. Selects candidates for the Quality Assurance Specialistand Technical Order Distribution Office (TODO) positions, taking into consideration skills andqualifications, mission requirements, Equal Employment Opportunity (EEO) and diversity objectives.Provides for employee development and training to ensure all assigned personnel are fully capableof executing a flawless inspection plan and perform their wartime tasking. Explains performance expectations to subordinates and provides regular feedback on strengths and weaknesses. Recommends within-grade increases, approves overtime and employee travel. Recommend

(3) Manages, reviews and develops maintenance policy, advising supervisors and employees onboth general policy and specific maintenance matters. Makes decisions and recommendations ontechnical concerns presented by supervisors. Utilizes comprehensive knowledge and ability tointerpret Air Force Instructions, Technical Orders, engineering drawings, product specifications, AirForce Occupational Safety and Health (AFOSH) environmental standards, public law, and locallydeveloped policy. Evaluates and assesses complex systems, subsystems, integratedsystems/subsystems, or components for conformance to applicable technical data, engineeringdrawings, standards and specifications. Establishes and develops performance checklists andmetrics. Reviews and approves local operating instructions to supplement regulations and manualsof higher echelons in the area of aircraft and aircraft systems quality assurance. Reviews allOperating Instructions (OIs) to ensure locally published instructions are technically accurate,complete and consistent with Air Force and Major Command policy. Ensures coordination withaffected commanders and ensures the instruction is published as a wing operating instruction.

(4) Performs other duties as assigned.

PLEASE CONTACT HRO FOR COMPLETE POSITION DESCRIPTION.