Total 29 maintenance repair job vacancies in spokane washington

Functions as a member of the Facilities Management Department, Administration Division, Federal Bureau of Prisons(BOP), Central Office, Washington, D.C.

Responsible for the maintenance and repair of all Central Office buildings and structures.

Performs a wide range of general maintenance duties in the Central Office buildings. The Central Office building includes 490,000 gross square feet and houses approximately 2,000 employees.

Responsible for various phases associated with the construction, repair, maintenance, and renovation of buildings and related structures, grounds, fixtures, and utilities, requiring the use of a variety of trade practices such as carpentry, masonry, plumbing, cement work, painting, welding, roofing, electric, HVAC, and other related trades.

• *Utilize skills in carpentry, plumbing, electrical, concrete, welding, and painting to inspect, repair and replace fixtures, utilities, and grounds upkeep for related structures.
• *Operate tools and equipment of various trades, including electrical test equipment, lawn care equipment, hand tools, power tools, air compressors, chain saws, compactors, and portable pumps.
• *Operate various equipment, pick-up trucks, forklift, tractor, all-terrain vehicle, and riding lawn mower.
• *Responsible for the proper care and maintenance of equipment used.
• *Perform daily maintenance and does minor repairs on supported facilities.
• *Schedule and report use of materials and equipment utilized on each job.

Tour of Duty:  Day Shift, 5:00 am - 2:30 pm with an option of an Alternate Work Schedule (AWS).

Work may include holidays and weekends on a regular and reoccurring basis.

**The incumbent of this position is designated as "Emergency/Essential" and will be required to report to work during emergencies and inclement weather conditions.**

To qualify for this position, you must have journey level experience in at least two of the following areas: Electronic Equipment Maintenance (BAS/DDC), HVAC, Plumbing or Pipefitting. The ideal candidate will have journey level experience in HVAC. This experience must be reflected in the resume.

DUTIES AND RESPONSIBILITIES:

HVAC and Refrigeration Troubleshooting, Installation and Maintenance

Maintains a variety of commercial and industrial systems in order to locate and check elements such as those which control low and high side pressures, the temperature of the cooling units, the temperatures of the liquid and suction lines and the running time of the various mechanisms.

Dismantles, repairs and reassembles units such as pumps, impellers, compressors, receivers and evaporators.

Overhauls valves by adjusting or replacing gaskets, springs, floats, diaphragms, valve fittings, seals and couplings and by aligning motors and drives.

Ensures the repair, overhaul, maintenance and servicing of equipment such as (but not limited to) refrigerator, freezers, water coolers, ice machines, commercial air handling units and smaller air conditioning units; ventilation systems, humidification and dehumidification systems, air compressors and central vacuum systems.

Oversees the installation, repair and troubleshooting of low voltage equipment such as thermostats and controllers; complex heating units related to steam, domestic and secondary hot water systems; other HVAC equipment such as variable frequency drives and motor controllers; and routine maintenance such as replacement of filters, bearings, calibration of sensors and other equipment.

Troubleshoots equipment electrical circuits to include VFDs, DX cooling units and low voltage controls.

Plumbing and Piping Systems Installation, Inspection and Maintenance

Troubleshoots and analyzes defects or malfunctions in specialized pipeline systems and related fixtures.

Inspects piping system equipment and fixtures using a variety of diagnostic techniques and equipment to locate a problem.

Checks steam and chilled water system for leaks, defects in equipment and malfunctions.

Independently conducts inspections of and troubleshoots piping systems, identifying irregularities and existing and/or potential problems.

Installs, modifies, repairs, maintains and troubleshoots high and low pressure piping systems, including domestic water distribution systems, sewage systems; steam generation systems; tempered water systems; hydronic heating systems; drain, waste and vent systems; sump pumps, sewage ejectors, irrigation systems; and fountain display systems.

Independently assembles, installs and repairs replacement pipes, fittings and fixtures of air, water, fountain, vacuum, chemical and other specialized pipeline systems and related fixtures according to specifications and plumbing codes.

Tests systems and equipment for proper operation, circulation, flow, pressure and ensures leak-free joints

Performs a variety of routine pipefitting tasks such as fabrication, installation, modification, repair and testing of piping and tubing.

Electronic Equipment Maintenance (Building Automation System/Direct Digital Controls)

Works on highly complex systems that are characterized by application of advanced electronic theory and frequent technological changes in the systems.

In support of HVAC operations, installs, maintains, troubleshoots and repairs new and existing highly complex systems of electronic sensing and control as well as new systems of similar complexity, mechanic implementing maintenance and repair procedures on major new or modified systems.

Responsible for installation, modification, operation, maintenance, calibration, repair and troubleshooting of the Direct Digital Controls (DDC) and for the day to day overall performance of the DDC.

Installs, modifies, operates, maintains, calibrates, repairs and troubleshoots sensor and controls and related interfaces with building equipment.

Provides technical support to the Facility Manager's team in finding solutions to control problems with the DDC system and its related hardware.  Provides technical solutions to problems with control of individual jurisdictional equipment.

NOTE:   Chlorofluorocarbon (CFC) certification by and EPA-Approved Technician's Certification Program is required.  Proof of certification is required upon selection.

• Assist in the repair of boiler plant heating systems including oil and gas fired high pressure boilers producing steam or high temperature hot water and distribution systems and related auxiliary components.
• Operate low pressure boilers and assists a journey level boiler plant operator in the operation of high-pressure boiler equipment to produce and control the amount of steam or high temperature water necessary to meet demands.
• Perform repair and maintenance on low pressure and high-pressure steam and water and distribution systems; removes and replaces parts, cleans refractory, repairs leaks, performs preventive maintenance on pumps, fans, etc.; performs emergency repairs.
• Assist with maintenance such as: checking multiple types of valves for proper operation and adjustment's as necessary to maintain specified pressures, no leaks and accuracy.
• Check pipes and pipe joints for leakages, checking insulation for signs of deterioration or damage and replacing or repairing defective parts as needed.

A WS-5801-10, SURFACE MAINTENANCE MECHANIC SUPERVISOR:

• Plans use of subordinate workers, equipment, facilities, and materials on a week-to-week or month-to-month basis. Establishes deadlines, priorities, and work sequences, and plans work assignments based on general work schedules, methods, and policies set by the supervisor. Coordinates work with supporting or related work functions controlled by other supervisors. Determines the number and types of workers needed to accomplish specific projects. Determines skills, materials, and equipment required to do the work. Redirects individual workers and resources to accomplish unanticipated work. Informs the supervisor of the need to revise work schedules and re-estimate labor and other resources. Participates in the initial planning of current and future work schedules, staffing needs, estimates, and recommendations as to scheduling projected work. Assists the supervisor with quarterly funding distribution and decisions, based on operational needs for units supported by customer activities. Reviews funding requirements, prioritizes request and allocates funding based on readiness, training, and mobilization requirements. Provides management with workload data, estimates, and recommendations to facilitate more effective management decisions for staffing and funding requirements to support customer units.
• Assigns tasks to be performed based on readiness and explains work requirements, methods, and procedures. Investigates work related problems such as excessive costs or low productivity and determines causes. Implements corrective actions within their authority to resolve work problems. Recommends solutions to staffing problems, engineering requirements, and work operations directed by other supervisors. Ensures work in progress and completed work meets established standards by implementation of a Quality Control and Assurance program within the organization. Ensures equipment repairs do not exceed maintenance expenditure limits in accordance as established by regulation and or policies. Effectively, efficiently, and economically makes adjustments as necessary to maximize production, accomplish specified tasks, and manage resources. Notes work related problems and independently implements corrective actions, which can be taken without affecting work operations controlled by other supervisors. Assures tools, special tools, test measurement and diagnostic equipment, personal protective equipment, repair parts, petroleum, oils and lubricants, and other materiel are available when needed. Manages maintenance backlog through coordination with other maintenance activities. Evacuates and accepts equipment, repairs, and services to and from other maintenance facilities.
• Determines training needs of subordinates and arranges for accomplishment. Sets performance standards, and makes formal appraisals of subordinate work performance. Initiates recommendations for promotion or reassignment of subordinates. Ensures that regulations governing safety and housekeeping are observed with appropriate protective clothing and equipment being utilized.
• Performs non-supervisory work, such as, transporting equipment, performing maintenance tasks, etc.
• Develops, publishes, and ensures employee compliance with standing operating procedures for the activity supervised. Implements and complies with agency, state, and federal regulatory Occupational Safety and Health, and environmental requirements. Ensures use of quality conformant products through compliance with established materials shelf life programs. Ensures all aspects of Force Protection to include physical security, facility and vehicle key control, property accountability, access control and employee protection in accordance with established policies and regulations. Implements procedures to account for all real property, installation property, MTO&E (Modified Tables of Organization and Equipment) property, TDA (Tables of Distribution and Allowances) property, and installed equipment located at or assigned to the facility in accordance with state and federal regulations and policies. Ensures subordinates are trained, qualified, and equipped with proper personnel protective equipment, environmental mediation equipment and materials. Ensure the employees wear appropriate safety equipment and follow pertinent safety precautions.
• Prepares for and participates in various types of readiness evaluations, inspections, mobilization and command support exercises. May be required to perform such additional duties as structural fire fighting, aircraft fire/crash/rescue duty, security guard, snow removal, munitions loading and handling, heavy equipment operation, maintenance of facilities and equipment, or to serve as a team member on boards to cope with natural disasters or civil emergencies.
• Other duties as assigned.

A WG-5801-8/10, SURFACE MAINTENANCE MECHANIC:

• Performs limited diagnosis, routine repairs and maintenance on heavy-duty mobile equipment, combat, tactical and automotive vehicles. Assists higher graded mechanics in the repair and/or overhaul of major systems to include internal combustion engines, turbine engines, automatic and non-automatic transmissions, heavy duty drive line systems, and hydraulic utility systems and controls. Makes routine repairs that can be accomplished by removing, adjusting, or replacing defective or worn parts and components. Performs work in accordance with technical manuals, lubrication orders, maintenance bulletins, regulations or management policies.
• Performs limited diagnoses to determine the cause of mechanical failures by means of visual and auditory checks and/or uses basic test equipment such as compression testers, voltmeters, ohmmeters and pressure gauges. Determines when parts should be cleaned, adjusted or replaced with standard parts to complete work orders.
• Removes, replaces, adjusts, cleans and installs parts and components such as wheel seals, switches, sensors, fuel pumps, water pumps, power steering pumps, brakes, filters, radiators, bearings, springs, shock absorbers, wheel cylinders, starter motors, mufflers, battery cables, and other items of similar complexity.
• Independently performs routine repairs and maintenance functions in remote locations that can be accomplished by removing, cleaning, reinstalling, or replacing defective parts of components and systems using standard parts. Receives guidance and instruction from a higher graded mechanic or supervisor to perform non-routine and more complex repairs on portions of major assemblies and/or systems. May provide field maintenance at unit locations as part of a "contact team". Recovers and evacuates inoperable vehicles from the unit location of breakdown.
• Conducts limited readiness and repair inspections on vehicles and associated equipment supported by the activity. Performs Preventive Maintenance Checks and Services (PMCS) and ensures vehicles and equipment are properly serviced, including brake adjustments, replacing hydraulic fluids, greasing, cleaning, etc. Performs other preventive maintenance operations as required to ensure that equipment is functioning properly.
• May perform routine maintenance and limited repairs on basic communication equipment such as radios, field telephones, amplifiers, switchboards, recorders, intercoms by removing and replacing components and elements. Performs minor body and fender, or other metal repairs, using peening hammers, dollies and limited welding. Performs limited repairs and routine maintenance on small arms and accessory equipment by replacing worn or damaged parts. Makes minor repairs to canvas and leather items using bonding/sealing compounds and hand tools such as awls, canvas needles etc.
• In conjunction with or in the absence of the Tools and Parts Attendant, may maintain supply documentation, and the receipt, store, issue, and inventory of tools and parts used in the trades operation.
• Other duties as assigned.

A WG-5801-8/10, SURFACE MAINTENANCE MECHANIC:

• Troubleshoots, performs maintenance and major repairs on heavy-duty mobile equipment, combat, tactical and automotive vehicles. This may include self-propelled artillery, tracked cargo and personnel carriers, road graders, mobile cranes, front loaders, conveyors, bulldozers, power shovels, compressors, generators, tanks, tracked combat vehicles, sedans, buses, all terrain vehicles, trucks, semi trailers, forklifts, tractors, and accessory equipment. Troubleshoots, repairs and overhauls major systems to include internal combustion engines, turbine engines, automatic and non-automatic transmissions, heavy duty drive line systems, and hydraulic utility systems and controls. Makes repairs to assemblies and components such as voltage regulators, generators/alternators, brake cylinders, etc. Performs work in accordance with modification work orders, technical manuals, lubrication orders, maintenance bulletins, regulations or management policies.
• Troubleshoots equipment and diagnoses the cause of mechanical failures by means of visual and auditory checks and/or uses test equipment such as engine analyzers, compression testers, voltmeters, ohmmeters, pressure gauges, and computer diagnostic tools. Utilizes embedded diagnostics in equipment and a wide variety of original equipment manufacturer system analyzers in order to determine the exact nature or extent of repair. Determines what adjustments may be necessary to complete work orders, and whether any additional repairs other than those specified or indicated on the work order are necessary.
• Removes and disassembles engines and major assemblies, sub-assemblies, components, and fuel, hydraulic, and oil pressure systems. Makes the appropriate repairs, overhaul, or modifications in accordance with the proper repair specifications and procedures. Reassembles engines and other systems, and adjusts, tests, and reinstalls in vehicles and equipment as necessary. Makes adjustments and repairs to electrical and suspension systems. May install pistons, sleeves, rings, bearings, rods, crankshafts, timing gears, and rocker arms. May be required to perform fuel injection equipment repair, overhaul, rebuild, and calibration duties utilizing a variety of complex test and calibration equipment.
• Independently performs repairs and maintenance functions in remote locations that can be accomplished by removing, cleaning, reinstalling, or replacing defective parts of components and systems such as injectors, leaking wheel cylinders, corroded mufflers, fuel tanks, brake cylinders and worn brake shoes, voltage regulators, generators, injector pumps, and fuel pumps. Provides technical guidance and specialized team leadership to lower grade employees within the team. Assists lower grade mechanics in performing major repair work. May provide Field and limited Sustainment maintenance at unit locations as part of a "contact team." Recovers and evacuates inoperable vehicles from the unit location of breakdown. May assist higher graded mechanics in repairing a variety of interconnected systems such as electrical, air and hydraulic systems, complex state of the art electrical and electronic systems that use specialized diagnostic equipment to identify problems, complex fuel injection systems and other similar complex systems.
• Conducts readiness and repair inspections on vehicles and associated equipment supported by the activity. Performs operational inspections and ensures vehicles and equipment are properly serviced, including brake adjustments, replacing hydraulic fluids, greasing, cleaning, etc., and performs other preventive maintenance operations as required. Inspects supported equipment prior to use during Inactive Duty Training and Annual Training, to ensure that it is functioning properly. May inspect in-process repair work of lower graded repairer to ensure equipment is being repaired in accordance with pertinent requirements. May serve as a commodity inspector during Command Maintenance Management evaluations or as a member of a Maintenance Assistance Instruction Team. Instructs operator/crew in the maintenance of equipment and provides technical advice and assistance to supported units when requested.
• May maintain and repair electronics communication equipment by removing and replacing components and elements. Equipment includes such items as radios, field telephones, amplifiers, switchboards, recorders, intercoms.
• Assists in the maintenance of production reports and records, and makes recommendations to the supervisor. Plans, organizes, and performs technical analyses as required or assigned. Makes recommendations to the supervisor as to adjustments necessary to effectively, efficiently and economically accomplish the work and maximize production.
• Other duties as assigned.

A WS-5801-10, SURFACE MAINTENANCE MECHANIC SUPERVISOR:

• Plans use of subordinate workers, equipment, facilities, and materials on a week-to-week or month-to-month basis. Establishes deadlines, priorities, and work sequences, and plans work assignments based on general work schedules, methods, and policies set by the supervisor. Coordinates work with supporting or related work functions controlled by other supervisors. Determines the number and types of workers needed to accomplish specific projects. Determines skills, materials, and equipment required to do the work. Redirects individual workers and resources to accomplish unanticipated work. Informs the supervisor of the need to revise work schedules and re-estimate labor and other resources. Participates in the initial planning of current and future work schedules, staffing needs, estimates, and recommendations as to scheduling projected work. Assists the supervisor with quarterly funding distribution and decisions, based on operational needs for units supported by customer activities. Reviews funding requirements, prioritizes request and allocates funding based on readiness, training, and mobilization requirements. Provides management with workload data, estimates, and recommendations to facilitate more effective management decisions for staffing and funding requirements to support customer units.
• Assigns tasks to be performed based on readiness and explains work requirements, methods, and procedures. Investigates work related problems such as excessive costs or low productivity and determines causes. Implements corrective actions within their authority to resolve work problems. Recommends solutions to staffing problems, engineering requirements, and work operations directed by other supervisors. Ensures work in progress and completed work meets established standards by implementation of a Quality Control and Assurance program within the organization. Ensures equipment repairs do not exceed maintenance expenditure limits in accordance as established by regulation and or policies. Effectively, efficiently, and economically makes adjustments as necessary to maximize production, accomplish specified tasks, and manage resources. Notes work related problems and independently implements corrective actions, which can be taken without affecting work operations controlled by other supervisors. Assures tools, special tools, test measurement and diagnostic equipment, personal protective equipment, repair parts, petroleum, oils and lubricants, and other materiel are available when needed. Manages maintenance backlog through coordination with other maintenance activities.
• Plans and establishes overall leave schedules. Determines training needs of subordinates and arranges for accomplishment. Sets performance standards, and makes formal appraisals of subordinate work performance. Initiates recommendations for promotion or reassignment of subordinates. Ensures that regulations governing safety and housekeeping are observed with appropriate protective clothing and equipment being utilized.
• Performs non-supervisory work, such as, transporting equipment, performing maintenance tasks, etc.
• Develops, publishes, and ensures employee compliance with standing operating procedures for the activity supervised. Implements and complies with agency, state, and federal regulatory Occupational Safety and Health, and environmental requirements. Ensures use of quality conformant products through compliance with established materials shelf life programs. Ensures all aspects of Force Protection to include physical security, facility and vehicle key control, property accountability, access control and employee protection in accordance with established policies and regulations. Implements procedures to account for all real property, installation property, MTO&E (Modified Tables of Organization and Equipment) property, TDA (Tables of Distribution and Allowances) property, and installed equipment located at or assigned to the facility in accordance with state and federal regulations and policies. Ensures subordinates are trained, qualified, and equipped with proper personnel protective equipment, environmental mediation equipment and materials. Ensure the employees wear appropriate safety equipment and follow pertinent safety precautions.
• Prepares for and participates in various types of readiness evaluations, inspections, mobilization and command support exercises. May be required to perform such additional duties as structural fire fighting, aircraft fire/crash/rescue duty, security guard, snow removal, munitions loading and handling, heavy equipment operation, maintenance of facilities and equipment, or to serve as a team member on boards to cope with natural disasters or civil emergencies.
• Other duties as assigned.

• Receives instructions and assists journeyman by using common carpentry tools to cut, drill, and assemble work products. Follows established safety procedures and practices when using hand and power equipment. Cleans tools and equipment and keeps work area clean and orderly.
• Helps the Maintenance Mechanic in plumber duties by performing the simpler and more routine tasks of the trade. Performs assigned routine tasks.
• Assists Maintenance Mechanic by performing the simpler and more routing duties of the painting trade and working with the journey level painters as instructed. Assists the Maintenance Mechanic by performing the simpler and more routine duties of the electrical trade and working with the journey level electricians as instructed.
• Performs a variety of general maintenance and upkeep duties in and around the assigned buildings and grounds.

A WG-5801-8/10, SURFACE MAINTENANCE MECHANIC:

• Troubleshoots, performs maintenance and major repairs on heavy-duty mobile equipment, combat, tactical and automotive vehicles. This may include self-propelled artillery, tracked cargo and personnel carriers, road graders, mobile cranes, front loaders, conveyors, bulldozers, power shovels, compressors, generators, tanks, tracked combat vehicles, sedans, buses, all terrain vehicles, trucks, semi trailers, forklifts, tractors, and accessory equipment. Troubleshoots, repairs and overhauls major systems to include internal combustion engines, turbine engines, automatic and non-automatic transmissions, heavy duty drive line systems, and hydraulic utility systems and controls. Makes repairs to assemblies and components such as voltage regulators, generators/alternators, brake cylinders, etc. Performs work in accordance with modification work orders, technical manuals, lubrication orders, maintenance bulletins, regulations or management policies. May repair a variety of more complex major systems to include engines, cross drive or similar multi-system transmissions and a variety of intricate fuel injection systems.
• Troubleshoots equipment and diagnoses the cause of mechanical failures by means of visual and auditory checks and/or uses test equipment such as engine analyzers, compression testers, voltmeters, ohmmeters, pressure gauges, and computer diagnostic tools. Utilizes embedded diagnostics in equipment and a wide variety of original equipment manufacturer system analyzers in order to determine the exact nature or extent of repair. Determines what adjustments may be necessary to complete work orders, and whether any additional repairs other than those specified or indicated on the work order are necessary.
• Removes and disassembles engines and major assemblies, sub-assemblies, components, and fuel, hydraulic, and oil pressure systems. Makes the appropriate repairs, overhaul, or modifications in accordance with the proper repair specifications and procedures. Reassembles engines and other systems, and adjusts, tests, and reinstalls in vehicles and equipment as necessary. Makes adjustments and repairs to electrical and suspension systems. May install pistons, sleeves, rings, bearings, rods, crankshafts, timing gears, and rocker arms. May be required to perform fuel injection equipment repair, overhaul, rebuild, and calibration duties utilizing a variety of complex test and calibration equipment.
• Independently performs repairs and maintenance functions in remote locations that can be accomplished by removing, cleaning, reinstalling, or replacing defective parts of components and systems such as injectors, leaking wheel cylinders, corroded mufflers, fuel tanks, brake cylinders and worn brake shoes, voltage regulators, generators, injector pumps, and fuel pumps. Provides technical guidance and specialized team leadership to lower grade employees within the team. Assists lower grade mechanics in performing major repair work. Recovers and evacuates inoperable vehicles from the unit location of breakdown. May assist higher graded mechanics in repairing a variety of interconnected systems such as electrical, air and hydraulic systems, complex state of the art electrical and electronic systems that use specialized diagnostic equipment to identify problems, complex fuel injection systems and other similar complex systems.
• Conducts readiness and repair inspections on vehicles and associated equipment supported by the activity. Performs operational inspections and ensures vehicles and equipment are properly serviced, including brake adjustments, replacing hydraulic fluids, greasing, cleaning, etc., and performs other preventive maintenance operations as required. Inspects supported equipment prior to use during Inactive Duty Training (IDT) and Annual Training, to ensure that it is functioning properly. May inspect in-process repair work of lower graded repairer to ensure equipment is being repaired in accordance with pertinent requirements. May serve as a commodity inspector during Command Maintenance Management evaluations or as a member of a Maintenance Assistance Instruction Team. Instructs operator/crew in the maintenance of equipment and provides technical advice and assistance to supported units when requested.
• May maintain and repair electronics communication equipment by removing and replacing components and elements. Equipment includes such items as radios, field telephones, amplifiers, switchboards, recorders, intercoms.
• Assists in the maintenance of production reports and records, and makes recommendations to the supervisor. Plans, organizes, and performs technical analyses as required or assigned. Makes recommendations to the supervisor as to adjustments necessary to effectively, efficiently and economically accomplish the work and maximize production.
• Other duties as assigned.

A WG-5801-11, SURFACE MAINTENANCE MECHANIC:

• Performs maintenance, troubleshooting, and major repair on heavy-duty mobile equipment, combat, tactical, and automotive vehicles. This may include self-propelled artillery, tracked cargo and personnel carriers, road graders, mobile cranes, front loaders, bulldozers, power shovels, tanks, tracked combat vehicles, all terrain vehicles, semi trailers, forklifts, tractors, and accessory equipment.
• Troubleshoots, repairs and/or overhauls, as a regular and recurring duty, a variety of the mechanically complex major systems to include internal combustion engines, turbine engines, automatic and non-automatic transmissions, heavy duty drive line systems, and hydraulic utility systems and controls, cross drive or similar multi-system transmissions and a variety of intricate fuel injection systems.
• Makes repairs and modifications to assemblies and components such as voltage regulators, generators/alternators, brake cylinders, etc., for use or placement in systems for which they were not specifically designed.
• Improvises work when standard procedures do not apply.
• Troubleshoots equipment with a variety of the mechanically complex major systems and diagnoses difficult performance problems and the cause of mechanical failures by means of visual and auditory checks, uses test equipment such as engine analyzers, compression testers, voltmeters, ohmmeters, pressure gauges and computer diagnostic tools.
• Utilizes embedded diagnostics in equipment and a wide variety of specialized original equipment manufacturer system analyzers in order to determine the exact nature or extent of repair.
• Determines what adjustments may be necessary to complete work orders, and whether any additional repairs other than those specified or indicated on the work order are necessary.
• Removes and disassembles engines and complex major assemblies, sub-assemblies, components, and fuel, hydraulic, and oil pressure systems.
• Makes the appropriate repairs, overhaul, or modifications in accordance with the proper repair specifications and procedures, and improvises repair techniques when standard procedures are not available.
• Reassembles engines and other systems, and adjusts, tests, and reinstalls in vehicles and equipment as necessary.
• Makes adjustments and repairs to electrical and suspension systems.
• Repairs equipment with a variety of interconnected systems to include state of the art electrical and electronic, fuel injection, interconnected gear reduction, multiple engine, and similarly complex systems.
• Improvises, substitutes, or alters components or parts to fit into systems for which the items were not specially designed or finds other ways to correct defects when existing methods and procedures do not give desired results.
• Independently performs repairs and maintenance functions with little or no supervision in remote locations.
• Provides technical guidance and specialized team leadership to lower grade employees within the team.
• Assists lower grade mechanics in performing major repair work on interconnected complex systems such as electrical, air and hydraulic systems, complex state of the art electrical and electronic systems that use specialized diagnostic equipment to identify problems, complex fuel injection systems and other similar complex systems.
• May provide Field and limited Sustainment maintenance at unit locations as part of a "contact team."
• Conducts readiness and repair inspections on vehicles and associated equipment supported by the activity.
• Performs operational inspections and ensures vehicles and equipment are properly serviced, including brake adjustments, replacing hydraulic fluids, greasing, cleaning, etc., and performs other preventive maintenance operations as required.
• Inspects supported equipment prior to use during Inactive Duty Training (IDT) and Annual Training (AT), to ensure that it is functioning properly.
• May inspect in-process repair work of lower graded repairer to ensure equipment is being repaired in accordance with pertinent requirements.
• May serve as a commodity inspector during Command Maintenance Management evaluations (COMET) or as a member of a Maintenance Assistance Instruction Team (MAIT).
• Instructs operator/crew in the maintenance of equipment and provides technical advice and assistance to supported units when requested.
• Performs electrical repairs on complex state of the art electrical and electronic systems requiring extensive training on specialized diagnostic equipment to identify problems.
• Assists in the maintenance of production reports and records, and makes recommendations to the supervisor.
• Plans, organizes, and performs technical analyses as required or assigned.
• Makes recommendations to the supervisor as to adjustments necessary to effectively, efficiently and economically accomplish the work and maximize production.
• Other duties as assigned.

A WG-5801-11, SURFACE MAINTENANCE MECHANIC:

• Troubleshoots, performs maintenance and major repairs on heavy-duty mobile equipment, combat, tactical and automotive vehicles.
• Troubleshoots, repairs and overhauls major systems to include internal combustion engines, turbine engines, automatic and non-automatic transmissions, heavy duty drive line systems, and hydraulic utility systems and controls.
• Makes repairs to assemblies and components such as voltage regulators, generators/alternators, brake cylinders, etc.
• Performs work in accordance with modification work orders, technical manuals, lubrication orders, maintenance bulletins, regulations or management policies.
• May repair a variety of more complex major systems to include engines, cross drive or similar multi-system transmissions and a variety of intricate fuel injection systems.
• Troubleshoots equipment and diagnoses the cause of mechanical failures by means of visual and auditory checks and/or uses test equipment such as engine analyzers, compression testers, voltmeters, ohmmeters, pressure gauges, and computer diagnostic tools.
• Utilizes embedded diagnostics in equipment and a wide variety of original equipment manufacturer system analyzers in order to determine the exact nature or extent of repair.
• Determines what adjustments may be necessary to complete work orders, and whether any additional repairs other than those specified or indicated on the work order are necessary.
• Removes and disassembles engines and major assemblies, sub-assemblies, components, and fuel, hydraulic, and oil pressure systems.
• Makes the appropriate repairs, overhaul, or modifications in accordance with the proper repair specifications and procedures.
• Reassembles engines and other systems, and adjusts, tests, and reinstalls in vehicles and equipment as necessary.
• Makes adjustments and repairs to electrical and suspension systems.
• May install pistons, sleeves, rings, bearings, rods, crankshafts, timing gears, and rocker arms.
• May be required to perform fuel injection equipment repair, overhaul, rebuild, and calibration duties utilizing a variety of complex test and calibration equipment.
• Independently performs repairs and maintenance functions in remote locations that can be accomplished by removing, cleaning, reinstalling, or replacing defective parts of components and systems such as injectors, leaking wheel cylinders, corroded mufflers, fuel tanks, brake cylinders and worn brake shoes, voltage regulators, generators, injector pumps, and fuel pumps.
• Provides technical guidance and specialized team leadership to lower grade employees within the team.
• Assists lower grade mechanics in performing major repair work.
• Recovers and evacuates inoperable vehicles from the unit location of breakdown.
• May assist higher graded mechanics in repairing a variety of interconnected systems such as electrical, air and hydraulic systems, complex state of the art electrical and electronic systems that use specialized diagnostic equipment to identify problems, complex fuel injection systems and other similar complex systems.
• Conducts readiness and repair inspections on vehicles and associated equipment supported by the activity.
• Performs operational inspections and ensures vehicles and equipment are properly serviced, including brake adjustments, replacing hydraulic fluids, greasing, cleaning, etc., and performs other preventive maintenance operations as required.
• Inspects supported equipment prior to use during Inactive Duty Training (IDT) and Annual Training (AT), to ensure that it is functioning properly.
• May inspect in-process repair work of lower graded repairer to ensure equipment is being repaired in accordance with pertinent requirements.
• May serve as a commodity inspector during Command Maintenance Management evaluations (COMET) or as a member of a Maintenance Assistance Instruction Team (MAIT).
• Instructs operator/crew in the maintenance of equipment and provides technical advice and assistance to supported units when requested.
• May maintain and repair electronics communication equipment by removing and replacing components and elements.
• Equipment includes such items as radios, field telephones, amplifiers, switchboards, recorders, intercoms.
• Assists in the maintenance of production reports and records and makes recommendations to the supervisor.
• Plans, organizes, and performs technical analyses as required or assigned.
• Makes recommendations to the supervisor as to adjustments necessary to effectively, efficiently and economically accomplish the work and maximize production.
• Other duties as assigned.

1. Performs visual inspections of the exterior and interior of all lodging facilities. Informs supervisor of major and minor discrepancies found.
2. Performs minor construction and repair on existing structures involving standard measurements, specifications, instructions, and basic shop mathematics. Installs exterior and interior trim using preplanned materials, such as baseboards, and molding. Replaces broken or missing acoustical ceiling tile, broken door and window trim, window screens, stairway steps, wooden porches, door jambs, and other damaged wood components.
3. Prepares wood and metal surfaces to be painted, mixes and prepares coating material, and applies coating materials (for example, paints, varnishes, and shellacs). Prepares surfaces by scraping, wire brushing, masking, spackling, and sand surfacing.
4. Makes minor electrical repairs by replacing fixtures, switches, sockets, stove burners, electrical cords, bulbs, and fluorescent fixtures.
5. Performs routine/seasonal maintenance and upkeep of gasoline powered lawn equipment to ensure equipment is in good mechanical and safe operating conditions. Identifies if routine maintenance is required to supervisor during initial inspection.
6. Drives vehicles weighing up to 10,000 pounds to various locations both on and off base. Performs routine safety inspections on vehicles, and corrects minor defects.
7. Uses and maintains tools and equipment. Utilizes hand and power tools such as, drills, power saws, routers, standard hand tools, straight edge, chalk line, tapes, rules, caulking irons, pipe wrenches, roller, putty knives, and paintbrushes.
8. Moves and arranges furniture as directed; performs snow removal operations; cleans carpets; and assists in linen duties as directed. Repairs or replaces key and keyless locking mechanisms.
9. Performs other related duties as assigned.

If interested in applying for this position you may preview the online application: https://apply.usastaffing.gov/ViewQuestionnaire/12511127

A WG-5801-10, SURFACE MAINTENANCE MECHANIC:

• Troubleshoots, performs maintenance and major repairs on heavy-duty mobile equipment,combat, tactical and automotive vehicles. This may include self-propelled artillery, tracked cargoand personnel carriers, road graders, mobile cranes, front loaders, conveyors, bulldozers, powershovels, compressors, generators, tanks, tracked combat vehicles, sedans, buses, all terrainvehicles, trucks, semi trailers, forklifts, tractors, and accessory equipment. Troubleshoots, repairsand overhauls major systems to include internal combustion engines, turbine engines, automaticand non-automatic transmissions, heavy duty drive line systems, and hydraulic utility systems andcontrols. Makes repairs to assemblies and components such as voltage regulators,generators/alternators, brake cylinders, etc. Performs work in accordance with modification workorders, technical manuals, lubrication orders, maintenance bulletins, regulations or managementpolicies. May repair a variety of more complex major systems to include engines, cross drive orsimilar multi-system transmissions and a variety of intricate fuel injection systems.
• Troubleshoots equipment and diagnoses the cause of mechanical failures by means of visual andauditory checks and/or uses test equipment such as engine analyzers, compression testers,voltmeters, ohmmeters, pressure gauges, and computer diagnostic tools. Utilizes embeddeddiagnostics in equipment and a wide variety of original equipment manufacturer system analyzers inorder to determine the exact nature or extent of repair. Determines what adjustments may benecessary to complete work orders, and whether any additional repairs other than those specifiedor indicated on the work order are necessary.
• Removes and disassembles engines and major assemblies, sub-assemblies, components, andfuel, hydraulic, and oil pressure systems. Makes the appropriate repairs, overhaul, or modificationsin accordance with the proper repair specifications and procedures. Reassembles engines and othersystems, and adjusts, tests, and reinstalls in vehicles and equipment as necessary. Makesadjustments and repairs to electrical and suspension systems. May install pistons, sleeves, rings,bearings, rods, crankshafts, timing gears, and rocker arms. May be required to perform fuelinjection equipment repair, overhaul, rebuild, and calibration duties utilizing a variety of complextest and calibration equipment.
• Independently performs repairs and maintenance functions in remote locations that can beaccomplished by removing, cleaning, reinstalling, or replacing defective parts of components andsystems such as injectors, leaking wheel cylinders, corroded mufflers, fuel tanks, brake cylindersand worn brake shoes, voltage regulators, generators, injector pumps, and fuel pumps. Providestechnical guidance and specialized team leadership to lower grade employees within the team.Assists lower grade mechanics in performing major repair work. May provide Field and limitedSustainment maintenance at unit locations as part of a "contact team." Recovers and evacuatesinoperable vehicles from the unit location of breakdown. May assist higher graded mechanics inrepairing a variety of interconnected systems such as electrical, air and hydraulic systems, complexstate of the art electrical and electronic systems that use specialized diagnostic equipment toidentify problems, complex fuel injection systems and other similar complex systems.
• Conducts readiness and repair inspections on vehicles and associated equipment supported bythe activity. Performs operational inspections and ensures vehicles and equipment are properlyserviced, including brake adjustments, replacing hydraulic fluids, greasing, cleaning, etc., andperforms other preventive maintenance operations as required. Inspects supported equipment priorto use during Inactive Duty Training (IDT) and Annual Training (AT), to ensure that it is functioningproperly. May inspect in-process repair work of lower graded repairer to ensure equipment is beingrepaired in accordance with pertinent requirements. May serve as a commodity inspector duringCommand Maintenance Management evaluations (COMET) or as a member of a MaintenanceAssistance Instruction Team (MAIT). Instructs operator/crew in the maintenance of equipment andprovides technical advice and assistance to supported units when requested.
• May maintain and repair electronics communication equipment by removing and replacingcomponents and elements. Equipment includes such items as radios, field telephones, amplifiers,switchboards, recorders, intercoms.
• Assists in the maintenance of production reports and records, and makes recommendations tothe supervisor. Plans, organizes, and performs technical analyses as required or assigned. Makesrecommendations to the supervisor as to adjustments necessary to effectively, efficiently andeconomically accomplish the work and maximize production.
• Other duties as assigned.

A WL-5801-10, SURFACE MAINTENANCE MECHANIC LEADER:

• Assigns work orders to specific crewmembers and selects workers for various jobs on the basis of knowledge, skills, and abilities.
• Passes on to workers instructions received from the supervisor, demonstrates proper work methods, and starts work. Insures that needed plans, blueprints, material, and tools are available, and that needed stock is obtained from supply locations.
• Works along with other workers and sets pace performing non-supervisory repair work of the same kind and level as that done by the group led.
• Checks work in progress and when finished for compliance with supervisor's instructions, work orders, and established shop procedures on work sequence, procedures, methods and deadlines; and directs or advises other workers to follow supervisor's instructions and to meet deadlines.
• Performs maintenance, troubleshooting, and major repair on heavy-duty mobile equipment, combat, tactical, and automotive vehicles.
• This may include self-propelled artillery, tracked cargo and personnel carriers, road graders, mobile cranes, front loaders, bulldozers, power shovels, tanks, tracked combat vehicles, all terrain vehicles, semi trailers, forklifts, tractors, and accessory equipment.
• Troubleshoots, repairs and/or overhauls, as a regular and recurring duty, a variety of the mechanically complex major systems to include internal combustion engines, turbine engines, automatic and non-automatic transmissions, heavy duty drive line systems, and hydraulic utility systems and controls, cross drive or similar multi-system transmissions and a variety of intricate fuel injection systems.
• Troubleshoots equipment with a variety of the mechanically complex major systems and diagnoses difficult performance problems and the cause of mechanical failures by means of visual and auditory checks, uses test equipment such as engine analyzers, compression testers, voltmeters, ohmmeters, pressure gauges and computer diagnostic tools.
• Utilizes embedded diagnostics in equipment and a wide variety of specialized original equipment manufacturer system analyzers in order to determine the exact nature or extent of repair.
• Removes and disassembles engines and complex major assemblies, sub-assemblies, components, and fuel, hydraulic, and oil pressure systems.
• Makes the appropriate repairs, overhaul, or modifications in accordance with the proper repair specifications and procedures, and improvises repair techniques when standard procedures are not available.
• Reassembles engines and other systems, and adjusts, tests, and reinstalls in vehicles and equipment as necessary. Makes adjustments and repairs to electrical and suspension systems.
• Independently performs repairs and maintenance functions with little or no supervision in remote locations.
• Provides technical guidance and specialized team leadership to lower grade employees within the team. Assists lower grade mechanics in performing major repair work on interconnected complex systems such as electrical, air and hydraulic systems, complex state of the art electrical and electronic systems that use specialized diagnostic equipment to identify problems, complex fuel injection systems and other similar complex systems.
• Conducts readiness and repair inspections on vehicles and associated equipment supported by the activity.
• Performs operational inspections and ensures vehicles and equipment are properly serviced, including brake adjustments, replacing hydraulic fluids, greasing, cleaning, etc., and performs other preventive maintenance operations as required.
• Inspects supported equipment prior to use during Inactive Duty Training (IDT) and Annual Training (AT), to ensure that it is functioning properly.
• Performs electrical repairs on complex state of the art electrical and electronic systems requiring extensive training on specialized diagnostic equipment to identify problems.
• Assists in the maintenance of production reports and records, and makes recommendations to the supervisor. Plans, organizes, and performs technical analyses as required or assigned.
• Makes recommendations to the supervisor as to adjustments necessary to effectively, efficiently and economically accomplish the work and maximize production.
• Other duties as assigned.