Total 310 maintenance repair job vacancies in city of preston lancashire pr4 5sa

Functions as a member of the Facilities Management Department, Administration Division, Federal Bureau of Prisons(BOP), Central Office, Washington, D.C.

Responsible for the maintenance and repair of all Central Office buildings and structures.

Performs a wide range of general maintenance duties in the Central Office buildings. The Central Office building includes 490,000 gross square feet and houses approximately 2,000 employees.

Responsible for various phases associated with the construction, repair, maintenance, and renovation of buildings and related structures, grounds, fixtures, and utilities, requiring the use of a variety of trade practices such as carpentry, masonry, plumbing, cement work, painting, welding, roofing, electric, HVAC, and other related trades.

• Serves as maintenance mechanic, performing work in variety of trades in carpentry, plumbing, painting and mechanical trades. Such trades involving, but not limited to maintenance of dam control tower facilities, buildings and structures.
• Operation of hydraulic systems, electrical equipment, machinery, mechanical tools, use of backhoe, tractor etc.
• Installation and construction of buildings/structures, as well as modification and repairing of current structures and buildings.
• Performs more difficult carpentry work that involves utilizing skills and techniques required to install, repair, or modify wood products such as building renovation, door/window frames, walls, furniture, etc.
• Maintenance of water treatment plants requiring filtration processes; electrical work; welding etc.
• Performs repair of electrical fixtures, defective wiring, etc. requiring the removal and replacement, splicing, and soldering or tightening of connections.
• Electrical work also involves repair or replacement of such items as switches, defective wiring, controls, circuit breakers, receptacles, ballast's, and lighting fixtures.
• Operates utility vehicles and other equipment including trucks up to 5-ton stake or dump trucks, backhoes, tractors, and other engineering equipment required to complete assignments.

Are you an experienced Maintenance Technician who is looking for a new career?

Do you pride yourself on being reliable in your work and do you enjoy working with automated, electrical, and pneumatic machinery?

Have you an interest in helping your community with its health?

If you answered yes to the above questions and you have a can do attitude then please read on and apply as we are really interested in speaking with you!

About Us:

PHOENIX Healthcare Distribution is a national full-line pharmaceutical wholesaler with a network of distribution centres nationwide. We pride ourselves on delivering a high quality supply chain service to our customers, who include pharmacy, GPs, and hospitals. All of our depots are licensed by the MHRA, and comply with BSI ISO Quality and Environmental standards. We operate twice daily deliveries from our distribution centres across Monday to Friday and on a Saturday morning, and our local teams are supported by a centralised function team, primarily from our Head Office in Runcorn.

About the opportunity:

We’re looking for a Maintenance Technician to join our existing team in our Runcorn Distribution Centre.

Your key responsibilities will include maintaining high volume picking machinery via planned maintenance schedules, maintain up to date records of all maintenance work and support and manage the activities of any outside contractors whilst on site.

The successful candidate will understand the principles of Good Distribution Practice (GDP) guidelines for Pharmaceutical Distributors and carry out the duties in such a way that they demonstrate compliance. You will have the ability to safely work at height. Although you will not have direct reports, you will mentor and coach junior members of the technical team.

Salary

Competitive

Working Hours

Working hours: 41.25 Hours per week

Working Pattern

Week 1 : Monday - Friday: 06:00 - 14:15

Week 2 : Monday - Friday: 14:00 - 22:15

Week 3 : Monday - Friday 22:00 - 06:15

1 in 3 Sundays 06:00 - 14:00

Training and Support

You will receive a comprehensive induction from the Learning and Development Facilitators.

We pride ourselves on ensuring the wellbeing of our employees and providing a good working environment and benefits package, which includes:

22 days paid annual leave plus bank holidays, rising with length of service

Access to High Street discounts

Free Parking

Employee Assistance Programme

Contributory Pension Scheme

Accredited Training Programmes

Essential Skills/Experience

• Recognised level 3 engineering electrical/mechanical qualification
• Proficient with Microsoft Office (Excel, Word & Outlook)
• Experience of fault finding within electrical/mechanical/pneumatic systems.

Desirable:

• IOSH/NEBOSH certificate
• Demonstrated history of continuous improvement
• Knowledge of AS-i/PROFIBUS/PROFINET

Who we want:

Our ideal candidate will be organised and self-motivated so if this sounds like you we are very keen to speak to you to discuss our opportunity further. You can apply here online by completing our short application.

We reserve the right to close this vacancy early if sufficient applications are received

INDPHD

Tour of Duty:  Day Shift, 5:00 am - 2:30 pm with an option of an Alternate Work Schedule (AWS).

Work may include holidays and weekends on a regular and reoccurring basis.

**The incumbent of this position is designated as "Emergency/Essential" and will be required to report to work during emergencies and inclement weather conditions.**

To qualify for this position, you must have journey level experience in at least two of the following areas: Electronic Equipment Maintenance (BAS/DDC), HVAC, Plumbing or Pipefitting. The ideal candidate will have journey level experience in HVAC. This experience must be reflected in the resume.

DUTIES AND RESPONSIBILITIES:

HVAC and Refrigeration Troubleshooting, Installation and Maintenance

Maintains a variety of commercial and industrial systems in order to locate and check elements such as those which control low and high side pressures, the temperature of the cooling units, the temperatures of the liquid and suction lines and the running time of the various mechanisms.

Dismantles, repairs and reassembles units such as pumps, impellers, compressors, receivers and evaporators.

Overhauls valves by adjusting or replacing gaskets, springs, floats, diaphragms, valve fittings, seals and couplings and by aligning motors and drives.

Ensures the repair, overhaul, maintenance and servicing of equipment such as (but not limited to) refrigerator, freezers, water coolers, ice machines, commercial air handling units and smaller air conditioning units; ventilation systems, humidification and dehumidification systems, air compressors and central vacuum systems.

Oversees the installation, repair and troubleshooting of low voltage equipment such as thermostats and controllers; complex heating units related to steam, domestic and secondary hot water systems; other HVAC equipment such as variable frequency drives and motor controllers; and routine maintenance such as replacement of filters, bearings, calibration of sensors and other equipment.

Troubleshoots equipment electrical circuits to include VFDs, DX cooling units and low voltage controls.

Plumbing and Piping Systems Installation, Inspection and Maintenance

Troubleshoots and analyzes defects or malfunctions in specialized pipeline systems and related fixtures.

Inspects piping system equipment and fixtures using a variety of diagnostic techniques and equipment to locate a problem.

Checks steam and chilled water system for leaks, defects in equipment and malfunctions.

Independently conducts inspections of and troubleshoots piping systems, identifying irregularities and existing and/or potential problems.

Installs, modifies, repairs, maintains and troubleshoots high and low pressure piping systems, including domestic water distribution systems, sewage systems; steam generation systems; tempered water systems; hydronic heating systems; drain, waste and vent systems; sump pumps, sewage ejectors, irrigation systems; and fountain display systems.

Independently assembles, installs and repairs replacement pipes, fittings and fixtures of air, water, fountain, vacuum, chemical and other specialized pipeline systems and related fixtures according to specifications and plumbing codes.

Tests systems and equipment for proper operation, circulation, flow, pressure and ensures leak-free joints

Performs a variety of routine pipefitting tasks such as fabrication, installation, modification, repair and testing of piping and tubing.

Electronic Equipment Maintenance (Building Automation System/Direct Digital Controls)

Works on highly complex systems that are characterized by application of advanced electronic theory and frequent technological changes in the systems.

In support of HVAC operations, installs, maintains, troubleshoots and repairs new and existing highly complex systems of electronic sensing and control as well as new systems of similar complexity, mechanic implementing maintenance and repair procedures on major new or modified systems.

Responsible for installation, modification, operation, maintenance, calibration, repair and troubleshooting of the Direct Digital Controls (DDC) and for the day to day overall performance of the DDC.

Installs, modifies, operates, maintains, calibrates, repairs and troubleshoots sensor and controls and related interfaces with building equipment.

Provides technical support to the Facility Manager's team in finding solutions to control problems with the DDC system and its related hardware.  Provides technical solutions to problems with control of individual jurisdictional equipment.

NOTE:   Chlorofluorocarbon (CFC) certification by and EPA-Approved Technician's Certification Program is required.  Proof of certification is required upon selection.

-Accomplishes quality assurance inspections.
-Debriefs customers/vehicle operators and performs incoming inspections on special purpose, heavy, general purpose type vehicles and vehicular equipment.
-Performs heavy mobile equipment and automotive mechanic work.
-Utilizes established practices, procedures, and regulations regarding safety, security, and environmental issues; maintains safe and clean work environment; participates in assigned shop upkeep efforts; completes all required reports, forms, work orders, inspection and certification forms, and time sheets; and participates in productivity measurement studies, evaluations, and assessments.
-Establishes and maintains good working relationships.

Role & Responsibilities:

1. Plan maintenance and predictive maintenance.  
2. Eliminate unplanned machine breakdown (Repair, analysis root cause and sustainable countermeasure.)
3. Prepare appropriate machine spare parts to avoid long time machine breakdown and TPM (Total Preventive Maintenance) plan.
4. Work with related function to follow up, update and closed OPLs.
5. Record, analysis, daily tracking Main KPIs of %Technical loses, MTBF, MTTR and Maintenance cost to achieve Business Plan target.
6. 5S and Safety work
7. Contribution of ISO14001 and ISO45001 target.
8. Create work instruction, TPM plan and predictive maintenance plan.

MAJOR DUTIES

• Assists in the maintenance and construction of graded and paved trails, trail drainage, trail bridges, and guard rails.
• Assist in the installation, repair, and replacement of water diversion bars, cribbing and retainer walls. Removes windfalls, rockslides, surface outcroppings and debris from trails.
• Builds up tread surfaces in eroded areas. Installs steppingstones at creek crossings where bridges cannot be constructed.
• Will perform other duties such as routine painting, carpentry, janitorial, cleaning, trash pickup, ground keeping, digging, raking, or sweeping, assisting in transporting camp and work supplies and construction materials.

This is an open continuous vacancy announcement. Applicants will be referred periodically throughout the announcement period. Final application disposition will be completed once all positions have been filled or the announcement reaches the end of the open period stated in the announcement. The first cut-off date is 11:59 pm (est), (12-13-24).

Initial consideration will be given to candidates whose applications have been received before the first cut-off date. Qualification requirements must be met for those applications submitted by the first cut-off date.

Area Information:
Ozark National Scenic Riverways (U.S. National Park Service) Government housing is not available. Hiring Contact: William Terry, william_terry@nps.gov
Tallgrass Prairie National Preserve (U.S. National Park Service) Government Housing is not available. Hiring Contact: Skip Willoughby, skip_willoughby@nps.gov

As an AIRCRAFT MAINTENANCE SUPERVISOR, WS-8801-14, you will:

• Resolve grievances and ensures proper corrective action is taken
• Recommend promotion or reassignment of subordinate supervisors
• Readiness evaluations, inspections, and command support exercises
• Plan the overall allocation of personnel, funding, and equipment resources
• Ensure that subordinates wear appropriate safety equipment and follow safety precautions

• Planned maintenance and predictive maintenance
• Eliminate unplanned machine breakdown (Repair, analysis root cause and sustainable countermeasure.)
• Prepare appropriate machine spare parts to avoid long time machine breakdown and support total productive maintenance plan.
• Work with related function to follow up, update and closed Open problem list.
• Record, analysis, daily tracking Main KPIs of %Technical loses, Mean Time Between Failures, Mean Time To Repair and Maintenance cost to achieve Business Plan Target.
• 5S and Safety work.
• Contribution of ISO14001 and ISO45001 target.
• Create work instruction, Total Productive Maintenance plan and predictive maintenance plan.
• Prepare  Total Productive Maintenance plan and spare part for new machines.
• Total Productive Maintenance Window for TMC8 Assembly line.