Total 33 maintenance repair job vacancies in camp j t robinson arkansas

MAJOR DUTIES:

• The selectee performs a variety of duties within the full spectrum of maintenance activities, including carpentry, plumbing, painting, janitorial, grounds keeping, buildings, roads, trails and fence repair. Performs trail maintenance on walkways and trails (paved and unpaved) and performs construction and repair work on park's boundary fence.
• Performs grounds maintenance duties including mowing, fertilizing, and watering lawns, and trimming trees and hedges. Employee picks up trash, cleans restrooms and public use buildings, and performs other janitorial work as needed.
• Uses common tools to perform a variety of basic repairs and maintenance, plus operates small gas and electric power tools such as disc grinders, sanders, saws, post augers, riding and push-type mowers, weed trimmers, sweepers, vacuums, floor polishers and other janitorial equipment.
• Employee is required to operate motor vehicles and must possess a valid state driver's license. For routine maintenance and repair jobs, the incumbent works independently based on oral or written guidance from the supervisor.
• He/She may also assist higher-graded employees with more complex building maintenance, road repair projects and other special projects. Work is performed both indoors and outdoors, often under adverse weather conditions.
• Work requires lifting and moving heavy items, frequent bending, stooping, walking, standing, working in cramped positions and may involve some climbing. Employee also completes daily work reports.

• Performs simple and routine maintenance and repair of grounds, exterior structures, buildings, equipment, and related utilities.
• Assists higher graded maintenance workers or tradesmen in the performance of their work.
• Performs minor carpentry repairs using simple measures and hand tools on such tasks as replacing broken planks on picnic tables; broken windows using precut stock; minor adjustments or replaces hinges, latches, and catches.
• Performs minor painting using brush and roller according to specific instructions on projects where appearances are not critical such as staining picnic tables and trash barrels.
• Performs minor plumbing repairs such as tightening or replacing in-kind fittings and fixtures which do not require custom fitting or solder joints; replaces faucet washers; unplugs drains using a plunger; replaces liquid petroleum gas bottles.
• Receives, unloads and processes incoming shipments according to established procedures. Reports discrepancies and damage to others responsible for such items.
• Performs routine maintenance on campground sites and trails using hand tools to re-grade and reset barriers to restore areas to original appearances. Collects trash.
• Operates a light truck to pick up supplies and to transport materials to and from work sites while assisting on project work.
• Cleans and services chemical toilets, restrooms, and other campground or visitor facilities. Makes minor repairs as needed and refers problems to higher graded workers.
• Operates a forklift to load and unload supplies and light equipment not requiring special rigging.

1. Planning: Plans use of subordinate workers, equipment, facilities, and materials on a week-to-week or month-to-month basis. Establishes deadlines, priorities, and work sequences, and plans work assignments based on general work schedules, methods, and policies set by the supervisor. Coordinates work with supporting or related work functions controlled by other supervisors. Determines the number and types of workers needed to accomplish specific projects. Determines skills, materials, and equipment required to do the work. Redirects individual workers and resources to accomplish unanticipated work. Informs the supervisor of the need to revise work schedules and re-estimate labor and other resources. Participates in the initial planning of current and future work schedules, staffing needs, estimates, and recommendations as to scheduling projected work. Assists the supervisor with quarterly funding distribution and decisions, based on operational needs for units supported by customer activities. Reviews funding requirements, prioritizes request and allocates funding based on readiness, training, and mobilization requirements. Provides management with workload data, estimates, and recommendations to facilitate more effective management decisions for staffing and funding requirements to support customer units.
2. Work Direction: Assigns tasks to be performed based on readiness and explains work requirements, methods, and procedures. Investigates work related problems such as excessive costs or low productivity and determines causes. Implements corrective actions within authority to resolve work problems. Recommends solutions to staffing problems, engineering requirements, and work operations directed by other supervisors. Ensures work in progress and completed work meets established standards by implementation of a quality control and assurance program within the organization. Ensures equipment repairs do not exceed maintenance expenditure limits in accordance as established by regulation and or policies. Manages maintenance backlog through coordination with other maintenance activities. Evacuates and accepts equipment, repairs, and services to and from other maintenance facilities. Assures tools, special tools, test measurement and diagnostic equipment, personal protective equipment, repair parts, petroleum, oils and lubricants, and other materiel are available when needed.
3. Administration: Plans and establishes overall leave schedules. Determines training needs of subordinates and arranges for accomplishment. Sets performance standards, and makes formal appraisals of subordinate work performance. Initiates recommendations for promotion or reassignment of subordinates. Ensures that regulations governing safety and housekeeping are observed with appropriate protective clothing and equipment being utilized.
4. Performs non-supervisory work, such as, transporting equipment, performing maintenance tasks, etc.
5. Develops, publishes, and ensures employee compliance with standing operating procedures for the activity supervised. Implements and complies with agency, state, and federal regulatory Occupational Safety and Health, and environmental requirements. Ensures use of quality conformant products through compliance with established materials shelf life programs. Ensures all aspects of Force Protection to include physical security, facility and vehicle key control, property accountability, access control and employee protection in accordance with established policies and regulations. Implements procedures to account for all real property, installation property, MTO&E (Modified Tables of Organization and Equipment) property, TDA (Tables of Distribution and Allowances) property, and installed equipment located at or assigned to the facility in accordance with state and federal regulations and policies. Ensures subordinates are trained, qualified, and equipped with proper personnel protective equipment, environmental mediation equipment and materials. Ensure the employees wear appropriate safety equipment and follow pertinent safety precautions.
6. Prepares for and participates in various types of readiness evaluations, inspections, mobilization and command support exercises. May be required to perform such additional duties as structural fire fighting, aircraft fire/crash/rescue duty, security guard, snow removal, munitions loading and handling, heavy equipment operation, maintenance of facilities and equipment, or to serve as a team member on boards to cope with natural disasters or civil emergencies.
7. Performs other duties as assigned.

As a SURFACE MAINTENANCE MECHANIC, WG-5801-10, you will perform maintenance, repair, troubleshooting, inspection, and/or overhaul of a variety of combat, tactical, commercial, and special purpose vehicles and equipment.

(1) Troubleshoots, performs maintenance and major repairs on heavy-duty mobile equipment, combat, tactical and automotive vehicles. This may include self-propelled artillery, tracked cargo and personnel carriers, road graders, mobile cranes, front loaders, conveyors, bulldozers, power shovels, compressors, generators, tanks, tracked combat vehicles, sedans, buses, all terrain vehicles, trucks, semi trailers, forklifts, tractors, and accessory equipment. Troubleshoots, repairs and overhauls major systems to include internal combustion engines, turbine engines, automatic and non-automatic transmissions, heavy duty drive line systems, and hydraulic utility systems and controls. Makes repairs to assemblies and components such as voltage regulators, generators/alternators, brake cylinders, etc. Performs work in accordance with modification work orders, technical manuals, lubrication orders, maintenance bulletins, regulations or management policies. May repair a variety of more complex major systems to include engines, cross drive or similar multi-system transmissions and a variety of intricate fuel injection systems.

(2) Troubleshoots equipment and diagnoses the cause of mechanical failures by means of visual and auditory checks and/or uses test equipment such as engine analyzers, compression testers, voltmeters, ohmmeters, pressure gauges, and computer diagnostic tools. Utilizes embedded diagnostics in equipment and a wide variety of original equipment manufacturer system analyzers in order to determine the exact nature or extent of repair. Determines what adjustments may be necessary to complete work orders, and whether any additional repairs other than those specified or indicated on the work order are necessary.

(3) Removes and disassembles engines and major assemblies, sub-assemblies, components, and fuel, hydraulic, and oil pressure systems. Makes the appropriate repairs, overhaul, or modifications in accordance with the proper repair specifications and procedures. Reassembles engines and other systems, and adjusts, tests, and reinstalls in vehicles and equipment as necessary. Makes adjustments and repairs to electrical and suspension systems. May install pistons, sleeves, rings, bearings, rods, crankshafts, timing gears, and rocker arms. May be required to perform fuel injection equipment repair, overhaul, rebuild, and calibration duties utilizing a variety of complex test and calibration equipment.

(4) Independently performs repairs and maintenance functions in remote locations that can be accomplished by removing, cleaning, reinstalling, or replacing defective parts of components and systems such as injectors, leaking wheel cylinders, corroded mufflers, fuel tanks, brake cylinders and worn brake shoes, voltage regulators, generators, injector pumps, and fuel pumps. Provides technical guidance and specialized team leadership to lower grade employees within the team. Assists lower grade mechanics in performing major repair work. May provide Field and limited Sustainment maintenance at unit locations as part of a "contact team." Recovers and evacuates inoperable vehicles from the unit location of breakdown. May assist higher graded mechanics in repairing a variety of interconnected systems such as electrical, air and hydraulic systems, complex state of the art electrical and electronic systems that use specialized diagnostic equipment to identify problems, complex fuel injection systems and other similar complex systems.

(5) Conducts readiness and repair inspections on vehicles and associated equipment supported by the activity. Performs operational inspections and ensures vehicles and equipment are properly serviced, including brake adjustments, replacing hydraulic fluids, greasing, cleaning, etc., and performs other preventive maintenance operations as required. Inspects supported equipment prior to use during Inactive Duty Training (IDT) and Annual Training (AT), to ensure that it is functioning properly. May inspect in-process repair work of lower graded repairer to ensure equipment is being repaired in accordance with pertinent requirements. May serve as a commodity inspector during Command Maintenance Management evaluations (COMET) or as a member of a Maintenance Assistance Instruction Team (MAIT). Instructs operator/crew in the maintenance of equipment and provides technical advice and assistance to supported units when requested.

(6) Performs other duties as assigned.

As a SURFACE MAINTENANCE MECHANIC, WG-5801-10, you will perform maintenance, repair, troubleshooting, inspection, and/or overhaul of a variety of combat, tactical, commercial, and special purpose vehicles and equipment.

(1) Troubleshoots, performs maintenance and major repairs on heavy-duty mobile equipment, combat, tactical and automotive vehicles. This may include self-propelled artillery, tracked cargo and personnel carriers, road graders, mobile cranes, front loaders, conveyors, bulldozers, power shovels, compressors, generators, tanks, tracked combat vehicles, sedans, buses, all terrain vehicles, trucks, semi trailers, forklifts, tractors, and accessory equipment. Troubleshoots, repairs and overhauls major systems to include internal combustion engines, turbine engines, automatic and non-automatic transmissions, heavy duty drive line systems, and hydraulic utility systems and controls. Makes repairs to assemblies and components such as voltage regulators, generators/alternators, brake cylinders, etc. Performs work in accordance with modification work orders, technical manuals, lubrication orders, maintenance bulletins, regulations or management policies. May repair a variety of more complex major systems to include engines, cross drive or similar multi-system transmissions and a variety of intricate fuel injection systems.

(2) Troubleshoots equipment and diagnoses the cause of mechanical failures by means of visual and auditory checks and/or uses test equipment such as engine analyzers, compression testers, voltmeters, ohmmeters, pressure gauges, and computer diagnostic tools. Utilizes embedded diagnostics in equipment and a wide variety of original equipment manufacturer system analyzers in order to determine the exact nature or extent of repair. Determines what adjustments may be necessary to complete work orders, and whether any additional repairs other than those specified or indicated on the work order are necessary.

(3) Removes and disassembles engines and major assemblies, sub-assemblies, components, and fuel, hydraulic, and oil pressure systems. Makes the appropriate repairs, overhaul, or modifications in accordance with the proper repair specifications and procedures. Reassembles engines and other systems, and adjusts, tests, and reinstalls in vehicles and equipment as necessary. Makes adjustments and repairs to electrical and suspension systems. May install pistons, sleeves, rings, bearings, rods, crankshafts, timing gears, and rocker arms. May be required to perform fuel injection equipment repair, overhaul, rebuild, and calibration duties utilizing a variety of complex test and calibration equipment.

(4) Independently performs repairs and maintenance functions in remote locations that can be accomplished by removing, cleaning, reinstalling, or replacing defective parts of components and systems such as injectors, leaking wheel cylinders, corroded mufflers, fuel tanks, brake cylinders and worn brake shoes, voltage regulators, generators, injector pumps, and fuel pumps. Provides technical guidance and specialized team leadership to lower grade employees within the team. Assists lower grade mechanics in performing major repair work. May provide Field and limited Sustainment maintenance at unit locations as part of a "contact team." Recovers and evacuates inoperable vehicles from the unit location of breakdown. May assist higher graded mechanics in repairing a variety of interconnected systems such as electrical, air and hydraulic systems, complex state of the art electrical and electronic systems that use specialized diagnostic equipment to identify problems, complex fuel injection systems and other similar complex systems.

(5) Conducts readiness and repair inspections on vehicles and associated equipment supported by the activity. Performs operational inspections and ensures vehicles and equipment are properly serviced, including brake adjustments, replacing hydraulic fluids, greasing, cleaning, etc., and performs other preventive maintenance operations as required. Inspects supported equipment prior to use during Inactive Duty Training (IDT) and Annual Training (AT), to ensure that it is functioning properly. May inspect in-process repair work of lower graded repairer to ensure equipment is being repaired in accordance with pertinent requirements. May serve as a commodity inspector during Command Maintenance Management evaluations (COMET) or as a member of a Maintenance Assistance Instruction Team (MAIT). Instructs operator/crew in the maintenance of equipment and provides technical advice and assistance to supported units when requested.

(6) Performs other duties as assigned.

A WG-5801-8/10, SURFACE MAINTENANCE MECHANIC:

• Troubleshoots, performs maintenance and major repairs on heavy-duty mobile equipment, combat, tactical and automotive vehicles. This may include self-propelled artillery, tracked cargo and personnel carriers, road graders, mobile cranes, front loaders, conveyors, bulldozers, power shovels, compressors, generators, tanks, tracked combat vehicles, sedans, buses, all terrain vehicles, trucks, semi trailers, forklifts, tractors, and accessory equipment. Troubleshoots, repairs and overhauls major systems to include internal combustion engines, turbine engines, automatic and non-automatic transmissions, heavy duty drive line systems, and hydraulic utility systems and controls. Makes repairs to assemblies and components such as voltage regulators, generators/alternators, brake cylinders, etc. Performs work in accordance with modification work orders, technical manuals, lubrication orders, maintenance bulletins, regulations or management policies.
• Troubleshoots equipment and diagnoses the cause of mechanical failures by means of visual and auditory checks and/or uses test equipment such as engine analyzers, compression testers, voltmeters, ohmmeters, pressure gauges, and computer diagnostic tools. Utilizes embedded diagnostics in equipment and a wide variety of original equipment manufacturer system analyzers in order to determine the exact nature or extent of repair. Determines what adjustments may be necessary to complete work orders, and whether any additional repairs other than those specified or indicated on the work order are necessary.
• Removes and disassembles engines and major assemblies, sub-assemblies, components, and fuel, hydraulic, and oil pressure systems. Makes the appropriate repairs, overhaul, or modifications in accordance with the proper repair specifications and procedures. Reassembles engines and other systems, and adjusts, tests, and reinstalls in vehicles and equipment as necessary. Makes adjustments and repairs to electrical and suspension systems. May install pistons, sleeves, rings, bearings, rods, crankshafts, timing gears, and rocker arms. May be required to perform fuel injection equipment repair, overhaul, rebuild, and calibration duties utilizing a variety of complex test and calibration equipment.
• Independently performs repairs and maintenance functions in remote locations that can be accomplished by removing, cleaning, reinstalling, or replacing defective parts of components and systems such as injectors, leaking wheel cylinders, corroded mufflers, fuel tanks, brake cylinders and worn brake shoes, voltage regulators, generators, injector pumps, and fuel pumps. Provides technical guidance and specialized team leadership to lower grade employees within the team. Assists lower grade mechanics in performing major repair work. May provide Field and limited Sustainment maintenance at unit locations as part of a "contact team." Recovers and evacuates inoperable vehicles from the unit location of breakdown. May assist higher graded mechanics in repairing a variety of interconnected systems such as electrical, air and hydraulic systems, complex state of the art electrical and electronic systems that use specialized diagnostic equipment to identify problems, complex fuel injection systems and other similar complex systems.
• Conducts readiness and repair inspections on vehicles and associated equipment supported by the activity. Performs operational inspections and ensures vehicles and equipment are properly serviced, including brake adjustments, replacing hydraulic fluids, greasing, cleaning, etc., and performs other preventive maintenance operations as required. Inspects supported equipment prior to use during Inactive Duty Training and Annual Training, to ensure that it is functioning properly. May inspect in-process repair work of lower graded repairer to ensure equipment is being repaired in accordance with pertinent requirements. May serve as a commodity inspector during Command Maintenance Management evaluations or as a member of a Maintenance Assistance Instruction Team. Instructs operator/crew in the maintenance of equipment and provides technical advice and assistance to supported units when requested.
• May maintain and repair electronics communication equipment by removing and replacing components and elements. Equipment includes such items as radios, field telephones, amplifiers, switchboards, recorders, intercoms.
• Assists in the maintenance of production reports and records, and makes recommendations to the supervisor. Plans, organizes, and performs technical analyses as required or assigned. Makes recommendations to the supervisor as to adjustments necessary to effectively, efficiently and economically accomplish the work and maximize production.
• Other duties as assigned.

A WS-5801-10, SURFACE MAINTENANCE MECHANIC SUPERVISOR:

• Plans use of subordinate workers, equipment, facilities, and materials on a week-to-week or month-to-month basis. Establishes deadlines, priorities, and work sequences, and plans work assignments based on general work schedules, methods, and policies set by the supervisor. Coordinates work with supporting or related work functions controlled by other supervisors. Determines the number and types of workers needed to accomplish specific projects. Determines skills, materials, and equipment required to do the work. Redirects individual workers and resources to accomplish unanticipated work. Informs the supervisor of the need to revise work schedules and re-estimate labor and other resources. Participates in the initial planning of current and future work schedules, staffing needs, estimates, and recommendations as to scheduling projected work. Assists the supervisor with quarterly funding distribution and decisions, based on operational needs for units supported by customer activities. Reviews funding requirements, prioritizes request and allocates funding based on readiness, training, and mobilization requirements. Provides management with workload data, estimates, and recommendations to facilitate more effective management decisions for staffing and funding requirements to support customer units.
• Assigns tasks to be performed based on readiness and explains work requirements, methods, and procedures. Investigates work related problems such as excessive costs or low productivity and determines causes. Implements corrective actions within their authority to resolve work problems. Recommends solutions to staffing problems, engineering requirements, and work operations directed by other supervisors. Ensures work in progress and completed work meets established standards by implementation of a Quality Control and Assurance program within the organization. Ensures equipment repairs do not exceed maintenance expenditure limits in accordance as established by regulation and or policies. Effectively, efficiently, and economically makes adjustments as necessary to maximize production, accomplish specified tasks, and manage resources. Notes work related problems and independently implements corrective actions, which can be taken without affecting work operations controlled by other supervisors. Assures tools, special tools, test measurement and diagnostic equipment, personal protective equipment, repair parts, petroleum, oils and lubricants, and other materiel are available when needed. Manages maintenance backlog through coordination with other maintenance activities. Evacuates and accepts equipment, repairs, and services to and from other maintenance facilities.
• Determines training needs of subordinates and arranges for accomplishment. Sets performance standards, and makes formal appraisals of subordinate work performance. Initiates recommendations for promotion or reassignment of subordinates. Ensures that regulations governing safety and housekeeping are observed with appropriate protective clothing and equipment being utilized.
• Performs non-supervisory work, such as, transporting equipment, performing maintenance tasks, etc.
• Develops, publishes, and ensures employee compliance with standing operating procedures for the activity supervised. Implements and complies with agency, state, and federal regulatory Occupational Safety and Health, and environmental requirements. Ensures use of quality conformant products through compliance with established materials shelf life programs. Ensures all aspects of Force Protection to include physical security, facility and vehicle key control, property accountability, access control and employee protection in accordance with established policies and regulations. Implements procedures to account for all real property, installation property, MTO&E (Modified Tables of Organization and Equipment) property, TDA (Tables of Distribution and Allowances) property, and installed equipment located at or assigned to the facility in accordance with state and federal regulations and policies. Ensures subordinates are trained, qualified, and equipped with proper personnel protective equipment, environmental mediation equipment and materials. Ensure the employees wear appropriate safety equipment and follow pertinent safety precautions.
• Prepares for and participates in various types of readiness evaluations, inspections, mobilization and command support exercises. May be required to perform such additional duties as structural fire fighting, aircraft fire/crash/rescue duty, security guard, snow removal, munitions loading and handling, heavy equipment operation, maintenance of facilities and equipment, or to serve as a team member on boards to cope with natural disasters or civil emergencies.
• Other duties as assigned.

As a SURFACE MAINTENANCE MECHANIC, WG-5801-10, you will perform maintenance, repair, troubleshooting, inspection, and/or overhaul of a variety of combat, tactical, commercial, and special purpose vehicles and equipment.

(1) Troubleshoots, performs maintenance and major repairs on heavy-duty mobile equipment, combat, tactical and automotive vehicles. This may include self-propelled artillery, tracked cargo and personnel carriers, road graders, mobile cranes, front loaders, conveyors, bulldozers, power shovels, compressors, generators, tanks, tracked combat vehicles, sedans, buses, all terrain vehicles, trucks, semi trailers, forklifts, tractors, and accessory equipment. Troubleshoots, repairs and overhauls major systems to include internal combustion engines, turbine engines, automatic and non-automatic transmissions, heavy duty drive line systems, and hydraulic utility systems and controls. Makes repairs to assemblies and components such as voltage regulators, generators/alternators, brake cylinders, etc. Performs work in accordance with modification work orders, technical manuals, lubrication orders, maintenance bulletins, regulations or management policies. May repair a variety of more complex major systems to include engines, cross drive or similar multi-system transmissions and a variety of intricate fuel injection systems.

(2) Troubleshoots equipment and diagnoses the cause of mechanical failures by means of visual and auditory checks and/or uses test equipment such as engine analyzers, compression testers, voltmeters, ohmmeters, pressure gauges, and computer diagnostic tools. Utilizes embedded diagnostics in equipment and a wide variety of original equipment manufacturer system analyzers in order to determine the exact nature or extent of repair. Determines what adjustments may be necessary to complete work orders, and whether any additional repairs other than those specified or indicated on the work order are necessary.

(3) Removes and disassembles engines and major assemblies, sub-assemblies, components, and fuel, hydraulic, and oil pressure systems. Makes the appropriate repairs, overhaul, or modifications in accordance with the proper repair specifications and procedures. Reassembles engines and other systems, and adjusts, tests, and reinstalls in vehicles and equipment as necessary. Makes adjustments and repairs to electrical and suspension systems. May install pistons, sleeves, rings, bearings, rods, crankshafts, timing gears, and rocker arms. May be required to perform fuel injection equipment repair, overhaul, rebuild, and calibration duties utilizing a variety of complex test and calibration equipment.

(4) Independently performs repairs and maintenance functions in remote locations that can be accomplished by removing, cleaning, reinstalling, or replacing defective parts of components and systems such as injectors, leaking wheel cylinders, corroded mufflers, fuel tanks, brake cylinders and worn brake shoes, voltage regulators, generators, injector pumps, and fuel pumps. Provides technical guidance and specialized team leadership to lower grade employees within the team. Assists lower grade mechanics in performing major repair work. May provide Field and limited Sustainment maintenance at unit locations as part of a "contact team." Recovers and evacuates inoperable vehicles from the unit location of breakdown. May assist higher graded mechanics in repairing a variety of interconnected systems such as electrical, air and hydraulic systems, complex state of the art electrical and electronic systems that use specialized diagnostic equipment to identify problems, complex fuel injection systems and other similar complex systems.

(5) Conducts readiness and repair inspections on vehicles and associated equipment supported by the activity. Performs operational inspections and ensures vehicles and equipment are properly serviced, including brake adjustments, replacing hydraulic fluids, greasing, cleaning, etc., and performs other preventive maintenance operations as required. Inspects supported equipment prior to use during Inactive Duty Training (IDT) and Annual Training (AT), to ensure that it is functioning properly. May inspect in-process repair work of lower graded repairer to ensure equipment is being repaired in accordance with pertinent requirements. May serve as a commodity inspector during Command Maintenance Management evaluations (COMET) or as a member of a Maintenance Assistance Instruction Team (MAIT). Instructs operator/crew in the maintenance of equipment and provides technical advice and assistance to supported units when requested.

(6) Performs other duties as assigned.

As a SURFACE MAINTENANCE MECHANIC, WG-5801-10, you will perform maintenance, repair, troubleshooting, inspection, and/or overhaul of a variety of combat, tactical, commercial, and special purpose vehicles and equipment.

(1) Troubleshoots, performs maintenance and major repairs on heavy-duty mobile equipment, combat, tactical and automotive vehicles. This may include self-propelled artillery, tracked cargo and personnel carriers, road graders, mobile cranes, front loaders, conveyors, bulldozers, power shovels, compressors, generators, tanks, tracked combat vehicles, sedans, buses, all terrain vehicles, trucks, semi trailers, forklifts, tractors, and accessory equipment. Troubleshoots, repairs and overhauls major systems to include internal combustion engines, turbine engines, automatic and non-automatic transmissions, heavy duty drive line systems, and hydraulic utility systems and controls. Makes repairs to assemblies and components such as voltage regulators, generators/alternators, brake cylinders, etc. Performs work in accordance with modification work orders, technical manuals, lubrication orders, maintenance bulletins, regulations or management policies. May repair a variety of more complex major systems to include engines, cross drive or similar multi-system transmissions and a variety of intricate fuel injection systems.

(2) Troubleshoots equipment and diagnoses the cause of mechanical failures by means of visual and auditory checks and/or uses test equipment such as engine analyzers, compression testers, voltmeters, ohmmeters, pressure gauges, and computer diagnostic tools. Utilizes embedded diagnostics in equipment and a wide variety of original equipment manufacturer system analyzers in order to determine the exact nature or extent of repair. Determines what adjustments may be necessary to complete work orders, and whether any additional repairs other than those specified or indicated on the work order are necessary.

(3) Removes and disassembles engines and major assemblies, sub-assemblies, components, and fuel, hydraulic, and oil pressure systems. Makes the appropriate repairs, overhaul, or modifications in accordance with the proper repair specifications and procedures. Reassembles engines and other systems, and adjusts, tests, and reinstalls in vehicles and equipment as necessary. Makes adjustments and repairs to electrical and suspension systems. May install pistons, sleeves, rings, bearings, rods, crankshafts, timing gears, and rocker arms. May be required to perform fuel injection equipment repair, overhaul, rebuild, and calibration duties utilizing a variety of complex test and calibration equipment.

(4) Independently performs repairs and maintenance functions in remote locations that can be accomplished by removing, cleaning, reinstalling, or replacing defective parts of components and systems such as injectors, leaking wheel cylinders, corroded mufflers, fuel tanks, brake cylinders and worn brake shoes, voltage regulators, generators, injector pumps, and fuel pumps. Provides technical guidance and specialized team leadership to lower grade employees within the team. Assists lower grade mechanics in performing major repair work. May provide Field and limited Sustainment maintenance at unit locations as part of a "contact team." Recovers and evacuates inoperable vehicles from the unit location of breakdown. May assist higher graded mechanics in repairing a variety of interconnected systems such as electrical, air and hydraulic systems, complex state of the art electrical and electronic systems that use specialized diagnostic equipment to identify problems, complex fuel injection systems and other similar complex systems.

(5) Conducts readiness and repair inspections on vehicles and associated equipment supported by the activity. Performs operational inspections and ensures vehicles and equipment are properly serviced, including brake adjustments, replacing hydraulic fluids, greasing, cleaning, etc., and performs other preventive maintenance operations as required. Inspects supported equipment prior to use during Inactive Duty Training (IDT) and Annual Training (AT), to ensure that it is functioning properly. May inspect in-process repair work of lower graded repairer to ensure equipment is being repaired in accordance with pertinent requirements. May serve as a commodity inspector during Command Maintenance Management evaluations (COMET) or as a member of a Maintenance Assistance Instruction Team (MAIT). Instructs operator/crew in the maintenance of equipment and provides technical advice and assistance to supported units when requested.

(6) Performs other duties as assigned.

A WG-5801-8/10, SURFACE MAINTENANCE MECHANIC:

• Performs limited diagnosis, routine repairs and maintenance on heavy-duty mobile equipment, combat, tactical and automotive vehicles. Assists higher graded mechanics in the repair and/or overhaul of major systems to include internal combustion engines, turbine engines, automatic and non-automatic transmissions, heavy duty drive line systems, and hydraulic utility systems and controls. Makes routine repairs that can be accomplished by removing, adjusting, or replacing defective or worn parts and components. Performs work in accordance with technical manuals, lubrication orders, maintenance bulletins, regulations or management policies.
• Performs limited diagnoses to determine the cause of mechanical failures by means of visual and auditory checks and/or uses basic test equipment such as compression testers, voltmeters, ohmmeters and pressure gauges. Determines when parts should be cleaned, adjusted or replaced with standard parts to complete work orders.
• Removes, replaces, adjusts, cleans and installs parts and components such as wheel seals, switches, sensors, fuel pumps, water pumps, power steering pumps, brakes, filters, radiators, bearings, springs, shock absorbers, wheel cylinders, starter motors, mufflers, battery cables, and other items of similar complexity.
• Independently performs routine repairs and maintenance functions in remote locations that can be accomplished by removing, cleaning, reinstalling, or replacing defective parts of components and systems using standard parts. Receives guidance and instruction from a higher graded mechanic or supervisor to perform non-routine and more complex repairs on portions of major assemblies and/or systems. May provide field maintenance at unit locations as part of a "contact team". Recovers and evacuates inoperable vehicles from the unit location of breakdown.
• Conducts limited readiness and repair inspections on vehicles and associated equipment supported by the activity. Performs Preventive Maintenance Checks and Services (PMCS) and ensures vehicles and equipment are properly serviced, including brake adjustments, replacing hydraulic fluids, greasing, cleaning, etc. Performs other preventive maintenance operations as required to ensure that equipment is functioning properly.
• May perform routine maintenance and limited repairs on basic communication equipment such as radios, field telephones, amplifiers, switchboards, recorders, intercoms by removing and replacing components and elements. Performs minor body and fender, or other metal repairs, using peening hammers, dollies and limited welding. Performs limited repairs and routine maintenance on small arms and accessory equipment by replacing worn or damaged parts. Makes minor repairs to canvas and leather items using bonding/sealing compounds and hand tools such as awls, canvas needles etc.
• In conjunction with or in the absence of the Tools and Parts Attendant, may maintain supply documentation, and the receipt, store, issue, and inventory of tools and parts used in the trades operation.
• Other duties as assigned.

Major Duties: This is not an all-inclusive list

A SURFACE MAINTENANCE MECHANIC, WG-5801-11, (1) Performs maintenance, troubleshooting, and major repair on heavy-duty mobile equipment, combat, tactical, and automotive vehicles. This may include self-propelled artillery, tracked cargo and personnel carriers, road graders, mobile cranes, front loaders, bulldozers, power shovels, tanks, tracked combat vehicles, all terrain vehicles, semi trailers, forklifts, tractors, and accessory equipment. Troubleshoots, repairs and/or overhauls, as a regular and recurring duty, a variety of the mechanically complex major systems to include internal combustion engines, turbine engines, automatic and nonautomatic transmissions, heavy duty drive line systems, and hydraulic utility systems and controls, cross drive or similar multi-system transmissions and a variety of intricate fuel injection systems. Makes repairs and modifications to assemblies and components such as voltage regulators, generators/alternators, brake cylinders, etc., for use or placement in systems for which they were not specifically designed. Improvises work when standard procedures do not apply.
(2) Troubleshoots equipment with a variety of the mechanically complex major systems and diagnoses difficult performance problems and the cause of mechanical failures by means of visual and auditory checks, uses test equipment such as engine analyzers, compression testers, voltmeters, ohmmeters, pressure gauges and computer diagnostic tools. Utilizes embedded diagnostics in equipment and a wide variety of specialized original equipment manufacturer system analyzers in order to determine the exact nature or extent of repair. Determines what adjustments may be necessary to complete work orders, and whether any additional repairs other than those specified or indicated on the work order are necessary.
(3) Removes and disassembles engines and complex major assemblies, sub-assemblies, components, and fuel, hydraulic, and oil pressure systems. Makes the appropriate repairs, overhaul, or modifications in accordance with the proper repair specifications and procedures, and improvises repair techniques when standard procedures are not available. Reassembles engines and other systems, and adjusts, tests, and reinstalls in vehicles and equipment as necessary. Makes adjustments and repairs to electrical and suspension systems. Repairs equipment with a variety of interconnected systems to include state of the art electrical and electronic, fuel injection, interconnected gear reduction, multiple engine, and similarly complex systems. Improvises, substitutes, or alters components or parts to fit into systems for which the items were not specially designed or finds other ways to correct defects when existing methods and procedures do not give desired results.
(4) Independently performs repairs and maintenance functions with little or no supervision in remote locations. Provides technical guidance and specialized team leadership to lower grade employees within the team. Assists lower grade mechanics in performing major repair work on interconnected complex systems such as electrical, air and hydraulic systems, complex state of the art electrical and electronic systems that use specialized diagnostic equipment to identify problems, complex fuel injection systems and other similar complex systems. May provide Field and limited Sustainment maintenance at unit locations as part of a "contact team."
(5) Conducts readiness and repair inspections on vehicles and associated equipment supported by the activity. Performs operational inspections and ensures vehicles and equipment are properly serviced, including brake adjustments, replacing hydraulic fluids, greasing, cleaning, etc., and performs other preventive maintenance operations as required. Inspects supported equipment prior to use during Inactive Duty Training (IDT) and Annual Training (AT), to ensure that it is functioning properly. May inspect in-process repair work of lower graded repairer to ensure equipment is being repaired in accordance with pertinent requirements. May serve as a commodity inspector during Command Maintenance Management evaluations (COMET) or as a member of a Maintenance Assistance Instruction Team (MAIT). Instructs operator/crew in the maintenance of equipment and provides technical advice and assistance to supported units when requested.
(6) Performs electrical repairs on complex state of the art electrical and electronic systems requiring extensive training on specialized diagnostic equipment to identify problems.
(7) Assists in the maintenance of production reports and records, and makes recommendations to the supervisor. Plans, organizes, and performs technical analyses as required or assigned. Makes recommendations to the supervisor as to adjustments necessary to effectively, efficiently and economically accomplish the work and maximize production.

Performs other duties as assigned.

• You will assist maintenance workers, maintenance mechanics, heavy equipment operators, and various tradespersons in the performance of a variety of multi-trade or craft duties.
• You will operate, maintain, and repair buildings, roads, grounds, and equipment.
• You will assist with troubleshooting and repairing electrical, heating, ventilation, and air conditioning (HVAC), boiler repair and cleaning, and plumbing system components.
• You will perform building maintenance and repair work including carpentry, masonry, glass, and paint.
• You will support routine and emergency service work, repair, and minor construction projects.

As a SURFACE MAINTENANCE REPAIRER, WG-5801-8 your duties are below.

1. Performs limited diagnosis, routine repairs and maintenance on heavy-duty mobile equipment, combat, tactical and automotive vehicles. Assists higher graded mechanics in the repair and/or overhaul of major systems to include internal combustion engines, turbine engines, automatic and non-automatic transmissions, heavy duty drive line systems, and hydraulic utility systems and controls. Makes routine repairs that can be accomplished by removing, adjusting, or replacing defective or worn parts and components. Performs work in accordance with technical manuals, lubrication orders, maintenance bulletins, regulations or management policies.
2. Performs limited diagnoses to determine the cause of mechanical failures by means of visual and auditory checks and/or uses basic test equipment such as compression testers, voltmeters, ohmmeters and pressure gauges. Determines when parts should be cleaned, adjusted or replaced with standard parts to complete work orders.
3. Removes, replaces, adjusts, cleans and installs parts and components such as wheel seals, switches, sensors, fuel pumps, water pumps, power steering pumps, brakes, filters, radiators, bearings, springs, shock absorbers, wheel cylinders, starter motors, mufflers, battery cables, and other items of similar complexity.
4. Independently performs routine repairs and maintenance functions in remote locations that can be accomplished by removing, cleaning, reinstalling, or replacing defective parts of components and systems using standard parts. Receives guidance and instruction from a higher graded mechanic or supervisor to perform non-routine and more complex repairs on portions of major assemblies and/or systems. May provide field maintenance at unit locations as part of a "contact team". Recovers and evacuates inoperable vehicles from the unit location of breakdown.
5. Conducts limited readiness and repair inspections on vehicles and associated equipment supported by the activity. Performs Preventive Maintenance Checks and Services (PMCS) and ensures vehicles and equipment are properly serviced, including brake adjustments, replacing hydraulic fluids, greasing, cleaning, etc. Performs other preventive maintenance operations as required to ensure that equipment is functioning properly.
6. May perform routine maintenance and limited repairs on basic communication equipment such as radios, field telephones, amplifiers, switchboards, recorders, intercoms by removing and replacing components and elements. Performs minor body and fender, or other metal repairs, using peening hammers, dollies and limited welding. Performs limited repairs and routine maintenance on small arms and accessory equipment by replacing worn or damaged parts. Makes minor repairs to canvas and leather items using bonding/sealing compounds and hand tools such as awls, canvas needles etc.
7. In conjunction with or in the absence of the Tools and Parts Attendant, may maintain supply documentation, and the receipt, store, issue, and inventory of tools and parts used in the trades operation.
8. Performs other duties as assigned. D1193

1. (1) Troubleshoots, performs maintenance and major repairs on heavy-duty mobile equipment, combat, tactical and automotive vehicles. This may include self-propelled artillery, tracked cargo and personnel carriers, road graders, mobile cranes, front loaders, conveyors, bulldozers, power shovels, compressors, generators, tanks, tracked combat vehicles, sedans, buses, all terrain vehicles, trucks, semi trailers, forklifts, tractors, and accessory equipment. Troubleshoots, repairs and overhauls major systems to include internal combustion engines, turbine engines, automatic and non-automatic transmissions, heavy duty drive line systems, and hydraulic utility systems and controls. Makes repairs to assemblies and components such as voltage regulators, generators/alternators, brake cylinders, etc. Performs work in accordance with modification work orders, technical manuals, lubrication orders, maintenance bulletins, regulations or management policies. May repair a variety of more complex major systems to include engines, cross drive or similar multi-system transmissions and a variety of intricate fuel injection systems.
2. Troubleshoots equipment and diagnoses the cause of mechanical failures by means of visual and auditory checks and/or uses test equipment such as engine analyzers, compression testers, voltmeters, ohmmeters, pressure gauges, and computer diagnostic tools. Utilizes embedded diagnostics in equipment and a wide variety of original equipment manufacturer system analyzers in order to determine the exact nature or extent of repair. Determines what adjustments may be necessary to complete work orders, and whether any additional repairs other than those specified or indicated on the work order are necessary.
3. Removes and disassembles engines and major assemblies, sub-assemblies, components, and fuel, hydraulic, and oil pressure systems. Makes the appropriate repairs, overhaul, or modifications in accordance with the proper repair specifications and procedures. Reassembles engines and other systems, and adjusts, tests, and reinstalls in vehicles and equipment as necessary. Makes adjustments and repairs to electrical and suspension systems. May install pistons, sleeves, rings, bearings, rods, crankshafts, timing gears, and rocker arms. May be required to perform fuel injection equipment repair, overhaul, rebuild, and calibration duties utilizing a variety of complex test and calibration equipment.
4. Independently performs repairs and maintenance functions in remote locations that can be accomplished by removing, cleaning, reinstalling, or replacing defective parts of components and systems such as injectors, leaking wheel cylinders, corroded mufflers, fuel tanks, brake cylinders and worn brake shoes, voltage regulators, generators, injector pumps, and fuel pumps. Provides technical guidance and specialized team leadership to lower grade employees within the team. Assists lower grade mechanics in performing major repair work. May provide Field and limited Sustainment maintenance at unit locations as part of a "contact team." Recovers and evacuates inoperable vehicles from the unit location of breakdown. May assist higher graded mechanics in repairing a variety of interconnected systems such as electrical, air and hydraulic systems, complex state of the art electrical and electronic systems that use specialized diagnostic equipment to identify problems, complex fuel injection systems and other similar complex systems.
5. Conducts readiness and repair inspections on vehicles and associated equipment supported by the activity. Performs operational inspections and ensures vehicles and equipment are properly serviced, including brake adjustments, replacing hydraulic fluids, greasing, cleaning, etc., and performs other preventive maintenance operations as required. Inspects supported equipment prior to use during Inactive Duty Training (IDT) and Annual Training (AT), to ensure that it is functioning properly. May inspect in-process repair work of lower graded repairer to ensure equipment is being repaired in accordance with pertinent requirements. May serve as a commodity inspector during Command Maintenance Management evaluations (COMET) or as a member of a Maintenance Assistance Instruction Team (MAIT). Instructs operator/crew in the maintenance of equipment and provides technical advice and assistance to supported units when requested.
6. May maintain and repair electronics communication equipment by removing and replacing components and elements. Equipment includes such items as radios, field telephones, amplifiers, switchboards, recorders, intercoms.
7. Performs other duties as assigned.

As a SURFACE MAINTENANCE MECHANIC (3 VACANCIES), WG-5801-10 your duties are below.

1. Troubleshoots, performs maintenance and major repairs on heavy-duty mobile equipment, combat, tactical and automotive vehicles. This may include self-propelled artillery, tracked cargo and personnel carriers, road graders, mobile cranes, front loaders, conveyors, bulldozers, power shovels, compressors, generators, tanks, tracked combat vehicles, sedans, buses, all terrain vehicles, trucks, semi trailers, forklifts, tractors, and accessory equipment. Troubleshoots, repairs and overhauls major systems to include internal combustion engines, turbine engines, automatic and non-automatic transmissions, heavy duty drive line systems, and hydraulic utility systems and controls. Makes repairs to assemblies and components such as voltage regulators, generators/alternators, brake cylinders, etc. Performs work in accordance with modification work orders, technical manuals, lubrication orders, maintenance bulletins, regulations or management policies. May repair a variety of more complex major systems to include engines, cross drive or similar multi-system transmissions and a variety of intricate fuel injection systems.
2. Troubleshoots equipment and diagnoses the cause of mechanical failures by means of visual and auditory checks and/or uses test equipment such as engine analyzers, compression testers, voltmeters, ohmmeters, pressure gauges, and computer diagnostic tools. Utilizes embedded diagnostics in equipment and a wide variety of original equipment manufacturer system analyzers in order to determine the exact nature or extent of repair. Determines what adjustments may be necessary to complete work orders, and whether any additional repairs other than those specified or indicated on the work order are necessary.
3. Removes and disassembles engines and major assemblies, sub-assemblies, components, and fuel, hydraulic, and oil pressure systems. Makes the appropriate repairs, overhaul, or modifications in accordance with the proper repair specifications and procedures. Reassembles engines and other systems, and adjusts, tests, and reinstalls in vehicles and equipment as necessary. Makes adjustments and repairs to electrical and suspension systems. May install pistons, sleeves, rings, bearings, rods, crankshafts, timing gears, and rocker arms. May be required to perform fuel injection equipment repair, overhaul, rebuild, and calibration duties utilizing a variety of complex test and calibration equipment.
4. Independently performs repairs and maintenance functions in remote locations that can be accomplished by removing, cleaning, reinstalling, or replacing defective parts of components and systems such as injectors, leaking wheel cylinders, corroded mufflers, fuel tanks, brake cylinders and worn brake shoes, voltage regulators, generators, injector pumps, and fuel pumps. Provides technical guidance and specialized team leadership to lower grade employees within the team. Assists lower grade mechanics in performing major repair work. May provide Field and limited Sustainment maintenance at unit locations as part of a "contact team." Recovers and evacuates inoperable vehicles from the unit location of breakdown. May assist higher graded mechanics in repairing a variety of interconnected systems such as electrical, air and hydraulic systems, complex state of the art electrical and electronic systems that use specialized diagnostic equipment to identify problems, complex fuel injection systems and other similar complex systems.
5. Conducts readiness and repair inspections on vehicles and associated equipment supported by the activity. Performs operational inspections and ensures vehicles and equipment are properly serviced, including brake adjustments, replacing hydraulic fluids, greasing, cleaning, etc., and performs other preventive maintenance operations as required. Inspects supported equipment prior to use during Inactive Duty Training (IDT) and Annual Training (AT), to ensure that it is functioning properly. May inspect in-process repair work of lower graded repairer to ensure equipment is being repaired in accordance with pertinent requirements. May serve as a commodity inspector during Command Maintenance Management evaluations (COMET) or as a member of a Maintenance Assistance Instruction Team (MAIT). Instructs operator/crew in the maintenance of equipment and provides technical advice and assistance to supported units when requested.
6. May maintain and repair electronics communication equipment by removing and replacing components and elements. Equipment includes such items as radios, field telephones, amplifiers, switchboards, recorders, intercoms.
7. Assists in the maintenance of production reports and records and makes recommendations to the supervisor. Plans, organizes, and performs technical analyses as required or assigned.
8. Performs other duties as assigned. D1194