Total 347 Others level Maintenance / Repair job vacancies in Client Office: Bethesda, MD

• Provide highly specialized nursing care to patients, including critically ill patients.
• Formulate complex plans to meet patient care needs and to continually revise goals and/or objectives, according to changes in patient status.
• Respond decisively to life-threatening changes in patient's condition.
• Administer medications to patients as directed.
• Assist with complex nursing and diagnostic procedures and/or be responsible for advanced cardiac life support efforts until a physician arrives.
• Operate and/or monitor the performance of sophisticated equipment, used in the care of critically ill patients.
• Communicate pertinent patient/family information to the health care team.
• Float to other critical care units when needed and orient to Charge Nurse and Rapid Response Team Nurse.
• Orient new nurses and medics/LPNs/CNAs

Starting at $106,277 Per Year (GS 12)

Plumbing: Makes plumbing repairs that can be accomplished by removing, cleaning, resealing, replacing defective parts or units of utility, supply, and disposal systems, such as dirty traps, sections of broken tile, damaged or broken pipe, leaky faucets, and stopped up drains. Installs water heaters, garbage disposal units, faucets, and sinks.

Carpentry: Measures, cuts, and constructs or repairs wood or wood substitute items such as scaffolds, staging parts, panels, bins, pallets, concrete forms, dry walls, sheathing, and roof decking.

Painting: Performs standard coating methods such as brushing, rolling and spraying, by the use of coating materials that are prepared according to specific directions, and by the application of coating techniques that insure surfaces are fully coated, protected, and free from drips and runs. Observes required safety, sanitation and hazardous waste disposal rules and regulations. Operates vehicles to transport tools and materials to work site.

Performs other related duties as required.

Starting at $23.75 Per Hour (NA 8)

We encourage you to read the entire announcement prior to submitting your application. This post is for viewing purposes only.

This position is located at ICC-B in Bethesda, MD. However, there is the potential for use of other ODNI locations on a limited basis.

Lead and provide oversight to complex Office of the Director of National Intelligence (ODNI) facilities projects or programs ensuring alignment with corporate objectives, including those projects or programs with ill-defined requirements, parallel tasks, multiple dependencies, high risks, and multiple interfaces; lead the scheduling and prioritization of work tasks and prioritize critical activities for facilities projects from initiation to completion.

Lead, develop, interpret, and enforce ODNI facility policies and building operation guidelines and manage the preparation of reports and information required by ODNI, Office of Management Budget (OMB), Congress, and other government agencies.

Lead the development of and monitor the status of structured recommendations on facility operational improvements that comply with applicable Executive Orders, regulations, and statutes.

Lead and oversee teams to provide communication with customers ensuring that customer expectations are consistent with realistic time and cost projections and solicit customer feedback to assess customer satisfaction.

Supervise, develop and evaluate line employees; provide substantive feedback to include career development and skills development.

Provide oversight in the monitoring, identification, and resolution of day-to-day IC facilities issues, including those related to energy, environmental compliance, Military Construction, facilities program management, and climate change.

Oversee and monitor the development of financial forecasts and annual facility capital construction and minor maintenance/repair (M/MR) budget assessments and make structured recommendations for new space allocation, construction, occupancy, and warranties to meet IC mission-critical requirements.

Lead groups of IC peers through applicable working groups and communities of practice to advance collaboration and promote efficiencies across the IC.

Starting at $163,964 Per Year (GS 15)

Recently named as one of the 'Best Big Companies to Work For’ by Best Companies, J. Murphy & Sons Limited (Murphy) is a leading international, specialist engineering and construction company founded in 1951 with a purpose to improve life by delivering world-class infrastructure. Operating in the United Kingdom, Ireland and Canada, Murphy provides better engineered solutions to infrastructure sectors including transportation; natural resources; power and water. Headquartered in London, Murphy has a number of related businesses – Ground Engineering; Utility Connections; Murphy Plant; Murphy Process Engineering; Pipeline Testing Services; Specialist Welding Services; and Electrical Services. Murphy is a specialist in delivering pipelines, design, structural steel, tunnelling, fabrication, bridges and piling, and has a substantial holding of plant, equipment and facilities. Murphy employs around 3,600 engineers, professional managers and skilled operatives around the world. Together, they work as ‘One Murphy’
- directly delivering the people, plant and expertise needed to make projects a success. #MoreToMurphy
Technician, Cannock

Would you like to join one of the UK's Best Big Companies as awarded by Best Companies? Murphy is looking for a Technician to support Design Engineers in the delivery of CAD, BIM & Digital Engineering Deliverables, with technical responsibility for projects under their remit. You will report to the Digital Task Team Leader. Working within the Power sector within a multidisciplinary team.
What you will be doing

- Preparation of project design drawings, including site mechanical/civil GAs, traffic management, vehicle swept path analysis, route plans, etc.
- Preparation of project as-built drawings.
- Take part in roles assigned within a BEP and work to BS EN ISO 19650
- Formulation of deliverable packages and liaise with document control teams.
- Interrogation/preparation of concept/design pipework and/or civil 3D models
- Assistance, where required, with project tender packages
- Co-ordinate with internal & external team members/design teams/project teams where required.
- Liaise with colleagues, other departments and project teams with respect to drawing requirements
- Prepare drawings in accordance with current company CAD Standards
- Ensure that drawings are prepared, stored, issued and archived in accordance with company procedures via internal CAD Data Management software
- Capability to work to strict deadlines and project budgets
- Ensure that chargeable work can be evaluated by the preparation of adequate timesheet record

What are we looking for?

- Previous experience working as Assistant Technician
- Competent with Autodesk Navisworks
- Advanced AutoCAD
- Working knowledge of BIM workflows
- Experienced with using Revit
- Previous experience in the utility and/or marine pipeline sector
- Previous experience of ProjectWise

Maintenance Surveyor

£38,844.00per annum

37 hours per week

Head Office, Newport Road, Cardiff CF24 1GG (agile working)

The opportunity:

Linc Cymru are offering the opportunity to join our Asset Management team as a Maintenance Surveyor. The successful applicant will be responsible for undertaking pre and post contract inspections, manage voids and projects, provide excellent customer service and identify, raise and monitor works across the business. Our head office is based on Newport Road, Cardiff, the successful applicant must be able to cover Bridgend, Port Talbot, Neath, Swansea and the surrounding areas.

What we need from you:

- HNC in a building related subject or demonstrable equivalent experience that shows technical ability and experience appropriate to achieving a quality maintenance service.

- Excellent customer services, communication and negotiation skills.

- Current working knowledge of construction Health & Safety.

- Good computer skills: sound working knowledge of computer packages such as Microsoft Excel, Word and database packages, including the use of handheld equipment for site-based work.

- Analytical skills: able to analyse data and maintain information to report on trends and provide solutions.

- Skilled and experienced in providing high standards of customer service and resolving complaints.

- Competent numeracy skills: at least GCSE standard or equivalent.

- Full driving license.

- Enhanced DBS check will be carried out for this post.

What we offer in return:

- Wellbeing support

- Mileage cover for travel

- Dedicated learning and development team

- 26 days annual leave, plus bank holidays, increasing with length of service

- Excellent work life balance

- Agile working

- Perkbox discounts

What's it like to work at Linc?

Linc are passionate, ambitious, and respectful. We take pride in everything we do; we are creating a happier, healthier Wales.

We are creating an environment for people to flourish; we offer training, support, and career opportunities.

We offer great work life balance, competitive salaries, excellent benefits, wellbeing support and much more!

Our customers are at the heart of everything we do, so in one word - working at Linc is rewarding.

What's next?

The advert will close at 23:45 on 29th September2024. We reserve the right to close the advert before this date once we are in receipt of sufficient applications.

Before you go…

In trying to make our workforce more diverse, we adopt a Positive Action Rule to people from ethnic minority groups. This means that if you meet the selection criteria in the job advert and are from an ethnic minority community, you will be offered an interview, if you give consent for this rule to be applied to your application.

Recently named as one of the 'Best Big Companies to Work For’ by Best Companies, J. Murphy & Sons Limited (Murphy) is a leading international, specialist engineering and construction company founded in 1951 with a purpose to improve life by delivering world-class infrastructure. Operating in the United Kingdom, Ireland and Canada, Murphy provides better engineered solutions to infrastructure sectors including transportation; natural resources; power and water. Headquartered in London, Murphy has a number of related businesses – Ground Engineering; Utility Connections; Murphy Plant; Murphy Process Engineering; Pipeline Testing Services; Specialist Welding Services; and Electrical Services. Murphy is a specialist in delivering pipelines, design, structural steel, tunnelling, fabrication, bridges and piling, and has a substantial holding of plant, equipment and facilities. Murphy employs around 3,600 engineers, professional managers and skilled operatives around the world. Together, they work as ‘One Murphy’
- directly delivering the people, plant and expertise needed to make projects a success. #MoreToMurphy
Technician, Cannock

Would you like to join one of the UK's Best Big Companies as awarded by Best Companies? Murphy is looking for a Technician to support Design Engineers in the delivery of CAD, BIM & Digital Engineering Deliverables, with technical responsibility for projects under their remit. You will report to the Digital Task Team Leader. Working within the Power sector within a multidisciplinary team.
What you will be doing

- Preparation of project design drawings, including site mechanical/civil GAs, traffic management, vehicle swept path analysis, route plans, etc.
- Preparation of project as-built drawings.
- Take part in roles assigned within a BEP and work to BS EN ISO 19650
- Formulation of deliverable packages and liaise with document control teams.
- Interrogation/preparation of concept/design pipework and/or civil 3D models
- Assistance, where required, with project tender packages
- Co-ordinate with internal & external team members/design teams/project teams where required.
- Liaise with colleagues, other departments and project teams with respect to drawing requirements
- Prepare drawings in accordance with current company CAD Standards
- Ensure that drawings are prepared, stored, issued and archived in accordance with company procedures via internal CAD Data Management software
- Capability to work to strict deadlines and project budgets
- Ensure that chargeable work can be evaluated by the preparation of adequate timesheet record

What are we looking for?

- Previous experience working as Assistant Technician
- Competent with Autodesk Navisworks
- Advanced AutoCAD
- Working knowledge of BIM workflows
- Experienced with using Revit
- Previous experience in the utility and/or marine pipeline sector
- Previous experience of ProjectWise

Recently named as one of the 'Best Big Companies to Work For’ by Best Companies, J. Murphy & Sons Limited (Murphy) is a leading international, specialist engineering and construction company founded in 1951 with a purpose to improve life by delivering world-class infrastructure. Operating in the United Kingdom, Ireland and Canada, Murphy provides better engineered solutions to infrastructure sectors including transportation; natural resources; power and water. Headquartered in London, Murphy has a number of related businesses – Ground Engineering; Utility Connections; Murphy Plant; Murphy Process Engineering; Pipeline Testing Services; Specialist Welding Services; and Electrical Services. Murphy is a specialist in delivering pipelines, design, structural steel, tunnelling, fabrication, bridges and piling, and has a substantial holding of plant, equipment and facilities. Murphy employs around 3,600 engineers, professional managers and skilled operatives around the world. Together, they work as ‘One Murphy’
- directly delivering the people, plant and expertise needed to make projects a success. #MoreToMurphy
Technician, Stonecross, Warrington
Would you like to join one of the UK's Best Big Companies as awarded by Best Companies? Murphy is looking for a Technician to support Design Engineers in the delivery of CAD, BIM & Digital Engineering Deliverables, with technical responsibility for projects under their remit. You will report to the Digital Task Team Leader. Working within the Power sector within a multidisciplinary team.
What you will be doing

- Preparation of project design drawings, including site mechanical/civil GAs, traffic management, vehicle swept path analysis, route plans, etc.
- Preparation of project as-built drawings.
- Take part in roles assigned within a BEP and work to BS EN ISO 19650
- Formulation of deliverable packages and liaise with document control teams.
- Interrogation/preparation of concept/design pipework and/or civil 3D models
- Assistance, where required, with project tender packages
- Co-ordinate with internal & external team members/design teams/project teams where required.
- Liaise with colleagues, other departments and project teams with respect to drawing requirements
- Prepare drawings in accordance with current company CAD Standards
- Ensure that drawings are prepared, stored, issued and archived in accordance with company procedures via internal CAD Data Management software
- Capability to work to strict deadlines and project budgets
- Ensure that chargeable work can be evaluated by the preparation of adequate timesheet record


What are we looking for?

- Previous experience working as Assistant Technician
- Competent with Autodesk Navisworks
- Advanced AutoCAD
- Working knowledge of BIM workflows
- Experienced with using Revit
- Previous experience in the utility and/or marine pipeline sector
- Previous experience of ProjectWise

Express new ideas, take initiative and save lives. Others talk about being brave, at IC24, were made that way. From providing high quality integrated urgent care for over six million people, to thinking of innovative solutions for our patients every role at IC24 is made to be brave. We are looking for someone to effectively provide administrative support to the Estates and Facilities Department. Some of the job roles will include: Regularly communicating with relevant IC24 staff about Estates, Facilities, and Transport matters. Liaising with external organisations, suppliers, and contractors as needed. Process and action Estates and Facilities work requests using IC24 IT systems, based on internal reports and service requests from IC24 sites. Perform general administrative tasks as assigned and within your capability. Manage the calendars of the Head of Estates & Facilities and Facilities Managers. Who are we? We are Integrated Care 24 (IC24), the leading not for profit Social Enterprise providing innovative and patient focused primary care services. IC24 is committed to improving access to health and social care for our patients and reducing the demand on secondary care services. IC24 provides services to over 6 million patients, including GP led out-of-hours services, NHS 111, primary care and secondary care support services. Location Ashford, Kent Hours Available 15 hours per week Whats in it for you: £22,000 per annum, pro rata Opportunity to join the NHS Pension Scheme Free 24/7 independent counselling service Learning and development opportunities Free membership to our reward and discount platform Access to Blue Light Card and other NHS Discount Schemes Due to the nature of this position, employment is subject to proof of eligibility to work in the UK, completion of a satisfactory basic and two references. For a job description and person specification please see attached pdf. We celebrate brave ideas and brave people. careers.ic24.org.uk We are committed to providing equal opportunities for all people and we particularly encourage applications from ethnic minorities, applicants with a disability and those from other under-represented groups. If you would like to discuss any reasonable adjustments before applying or would like an accessible version of any recruitment documents, please contact the recruitment team on careers@ic24.nhs.uk.

What you will do

Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

PURPOSE AND SCOPE:

Functions as part of the dialysis health care team in providing safe and effective dialysis therapy for patients under the direct supervision of a licensed nurse in accordance with organization policies, procedures, and training and in compliance with regulations set forth by the corporation, state, and federal agencies. Responsible for the setup and operation of hemodialysis machines. Assist in the maintenance of a safe and clean working environment. Supports the organization commitment to the Quality Enhancement Program (QEP) and CQI Activities, including those related to patient satisfaction and actively participates in process improvement activities that enhance the likelihood that patients will achieve the organization Quality Enhancement Goals (QEP).

PRINCIPAL DUTIES AND RESPONSIBILITIES:

Patient Related

Education:

• Assist other health care members in providing patient specific detailed education regarding adequacy measures where appropriate - Online Clearance Monitoring (OLC), Adequacy Monitoring Program (AMP), Urea Kinetic Modeling (UKM), and regarding disease process/access.

Treatment:

• Welcome assigned patients and inquire as to their wellbeing since their last treatment.

• Evaluate vascular access for patency, perform vascular access cannulation, and perform administration of heparin as delegated or as allowed by state law.

• Obtain necessary pre and post treatment vital signs and weight and perform vascular access evaluation pre- treatment

• Initiate dialysis treatment according to prescribed orders including blood flow (QB) and dialysate flow (QD).         

• Evaluate intradialytic problems and provide intervention as prescribed by physician order or as directed.   

• Monitor patients’ response to dialysis therapy. 

• Obtain vital signs prior to reinfusion; perform all relevant functions necessary for the discontinuation of treatment - document.       

• Discontinue dialysis treatment according to established procedures and evaluate patient prior to termination of venous access - standing & sitting blood pressure

• Obtain Hemostasis and apply appropriate dressings.   

• Evaluate the patient prior to discharge.

• Perform and record Pre and Post dialysis evaluation, weight, and vital signs with initial identification        

• Responsible for calculating and entry of individual patients’ dialysis machine programming for Ultrafiltration (UF) goal; treatment time; and UF modeling as prescribed.          

• Responsible for ensuring appropriate safety alarms are enabled, including Narrow Venous Limits, (NVL) 160.    

• Record accurate and timely information regarding vital signs and treatment parameters onto the Hemodialysis Treatment Sheet with initial identification      

• Responsible for accurate documentation of information related to patient treatment including completion of Hemodialysis Treatment Sheet and, if applicable, progress notes.         

• Report any significant information and/or change in patient condition directly to the registered nurse or supervisor.

• Observe patient and conduct machine safety checks according to facility policy. Report any change or unusual findings to the registered nurse or supervisor.

• Perform and document any intervention for unusual patient status and document patients' response to intervention.

• Evaluate patients’ vascular access during treatment including arterial and venous monitoring pressures, provide appropriate intervention as needed, document and report any unusual findings to the registered nurse or supervisor.

• Obtain all prescribed laboratory testing and prepare specimens for collection.      

• Ensure that all blood spills are immediately cleaned with appropriate disinfectant according to facility policy.       

• Prepare, organize, and efficiently utilize supplies and equipment to prevent wastage.       

• Monitors patients performing self-care under the supervision of RN.

Staff Related

• Assists in training of applicable direct patient care staff on appropriate programs under the supervision of a nurse.

Education/Communication:

• Follows all organization business policies, procedures and systems incorporated into training, including compliance with ethical business practices

• Maintain environmental integrity and aesthetics - ensure all areas are safe and clean.

• Clean and disinfect dialysis machine surface, chair, equipment, and surrounding area between treatments according to facility policy.

• Conduct all tasks necessary for preparation for dialysis treatment and document where appropriate and perform all required pretreatment dialysis machine alarm testing including Pressure Holding (PHT).

• Initiate Solution Delivery System (SDS) system.

RECORD KEEPING:

• Complete and document ongoing participation in Continuous Quality Improvement (CQI) activities.  

• Enters all treatment data into the designated clinical application in an accurate and timely manner.           

• Review treatment sheets for completeness, ensure nursing signatures are documented, and ensure

omitted entries are completed or corrected by appropriate staff.

• Prepare initial patient chart for admission and compile paperwork for appropriate placement in chart.

• Prepare/print lab requisitions for prescribed or stat Lab specimens according to laboratory destination.      

• Collect, label, appropriately prepare and store lab samples according required laboratory specifications.     

• Ensure collection of lab specimens by appropriate lab courier.

         

INFECTION CONTROL:

• Assists in collecting  information for infection control audits.       

• Supports staff and patient Adherence to infection control practices.         

• Follows infection control Policies and Procedures          

• Participates in and reinforces infection control education of patients and families under the direction of the CM or designee as allowed by state law.

         

TRANSITIONAL CARE UNIT:

• Follows all newly admitted patients through their first 4 weeks of dialysis and coordinating their transitional dialysis care 

• Reinforces all education and care related matters as it relates to the new patient           as allowed by state law

• Liaisons with appropriate FKC staff members to provide the best patient experience including making sure all disciplines are scheduled to see patient according to plan.      

• Assists in assuring patient understanding or home dialysis products, benefits of home and how home dialysis can work for them.

• Sets and preforms a treatment on all machines used in the transitional care unit.

• Assist in assuring patient understanding of treatment options including demonstration of the peritoneal dialysis set-up.

• Assists with coordination of transition to patient’s modality choice.         

• Assists with supply ordering and inventory for TCU       

PHYSICAL DEMANDS AND WORKING CONDITIONS:

• The physical demands and work environment characteristics described here are representative of those an employee

encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable

individuals with disabilities to perform the essential functions.

• Employees are required to take the Ishihara's Color Blindness test as a condition of employment. Note that: Failing the

Ishihara Test for Color Blindness does not preclude employment. The Company will consider whether reasonable

accommodations can be made.

• Day to day work includes desk and personal computer work and interaction with patients, facility staff, and physicians. The position requires travel between assigned facilities and various locations within the community. Travel to regional, Business Unit and Corporate meetings may be required.       

• The work environment is characteristic of a health care facility with air temperature control and moderate noise levels. May be exposed to infectious and contagious diseases/materials          

• The position provides direct patient care that regularly involves heavy lifting and moving of patients and assisting with ambulation. Equipment aids and/or coworkers may provide assistance. This position requires frequent, prolonged periods of standing and the employee must be able to bend over. The employee may occasionally be required to push and/or pull equipment, exerting up to 15 pounds of force. The employee may be required to lift and to lower solutions on a frequent basis of up to 30 lbs., and on an occasional lift basis up to 40 lbs., as high as 5 feet. There is a two-person assist program and "material assist” devices for the heavier items.

EDUCATION AND LICENSES:

• High School diploma or G.E.D. required.

• Must meet Center for Medicaid/Medicare Services (CMS)-approved state and/or national certification requirements within the required state or CMS timeline.

• All appropriate state licensure, education, and training (if any) required.

• Demonstrated commitment to organization culture, values, and customer service standards

EXPERIENCE AND REQUIRED SKILLS:

• Previous patient care experience in a hospital setting or a related facility preferred.

• Continued employment is dependent on successful completion of the organization dialysis training program and successful completion of CPR certification.

EO/AA Employer: Minorities/Females/Veterans/Disability/Sexual Orientation/Gender Identity

Fresenius Medical Care North America maintains a drug-free workplace in accordance with applicable federal and state laws.

EO/AA Employer: Minorities/Females/Veterans/Disability/Sexual Orientation/Gender Identity

 

Fresenius Medical Care North America maintains a drug-free workplace in accordance with applicable federal and state laws.

Welcome to Gordon Food Service! We are excited that you are thinking about opportunities with us, and we have an amazing story to share. See below for a quick glance of who we are and the impact you could have on the food service industry. There's a seat at our table for you...

Industrial Maintenance

Location: 504 Advantage Ave. Aberdeen, MD

The backbone of any organization is a team that is dedicated to keeping things in order. Our valued maintenance teams keep things running, our business in motion, and our customers successful. As a maintenance mechanic with Gordon Food Service, you’ll have the opportunity to be hands-on with building schematics/blueprints, hydraulics, electrical troubleshooting, HVAC systems, building maintenance, hi-speed doors, and more. We have high standards for safety, stability, and training to ensure our people are safe and that our business is always running at top performance. We offer a clean organized parts room and we provide the heavier specialty tools; you just bring the basics. Be part of a skilled team that offers respect, expertise, and professional development!

Schedule: Sunday- Thursday 6:00 PM - 2:30 AM

Pay rate based on experience

• Earn an additional $2.85 per hour performance incentive - no flat rates!

• Annual $1,000 tool allowance and $150 boot allowance

Total Rewards at GFS

• Affordable benefits plans start day one!

• Weekly pay 

• Wellness reimbursement 

• Profit sharing & 401(k) with company match 

• Emergency child and elder care 

• 95% of leadership is hired from within GFS - start your career here!

• No travel required

Does this look like you?

• You must be 18 years of age or older 

• High school diploma or GED certificate

• Powered Industrial Vehicle certification required

• Three years previous machine repair experience OR an equivalent combination of education and training. Previous experience in forklift repair

• You'll be asked to do work in high places, freezing cold spaces, inside/outside, and anywhere within the building where you are needed

• Successful passing of drug screen and background check

• Able to lift/move up to 100 lbs during your shift

Gordon Food Service encourages veterans and active military members to apply

Mechanical Technician

Job Category: Engineering and Technical Support

Time Type: Full time

Minimum Clearance Required to Start: Secret

Employee Type: Regular

Percentage of Travel Required: Up to 10%

Type of Travel: Local

* * *

What You’ll Get to Do:

• The candidate will perform fabrication, integration, and assembly activities associated with prototype development.
• Determine the appropriate fabrication equipment or method based on requirements.
• Perform fabrication, modification, and installation of mechanical components and subsystems.
• Maintain equipment in a condition that does not compromise safety.
• Perform complex set-up and machining operations, on various machine tools such as vertical mills, lathes, drill press, multiple spindle drills and riveting machines.
• Skilled in the use of measuring tools and test instruments.
• Experience in using electrical and manual tools (saws, squares, calipers etc.)
• Ability to read and interpret technical documents and drawings.
• Possess an understanding of methods used to produce fabricated parts.
• Maintain equipment in a condition that does not compromise safety.
• Skilled in the use of sheet metal and machine tools such as shears, breaks, saws, milling machines, welding machines, and lathes.
• Possess an understanding of methods used to produce fabricated parts.

You’ll Bring These Qualifications:

• SolidWorks / CREO CAD experience.
• CAD/ CAM Software experience.
• Knowledge of manufacturing quality assurance processes
• Active SECRET security clearance with the ability to obtain a TS/SCI.

These Qualifications Are Nice TO Have:

• CNC Programming
• CAD/ CAM Software experience
• Experience in TIG and MIG welding
• D1.1, D1.2.1, and D17.1 Welding Certifications

What We Can Offer You:

- We’ve been named a Best Place to Work by the Washington Post.

- Our employees value the flexibility at CACI that allows them to balance quality work and their personal lives.

- We offer competitive benefits and learning and development opportunities.

- We are mission-oriented and ever vigilant in aligning our solutions with the nation’s highest priorities.

- For over 60 years, the principles of CACI’s unique, character-based culture have been the driving force behind our success.

 

Company Overview:

CACI is an Equal Opportunity/Affirmative Action Employer.  All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or any other protected characteristic.

Pay Range: There are a host of factors that can influence final salary including, but not limited to, geographic location, Federal Government contract labor categories and contract wage rates, relevant prior work experience, specific skills and competencies, education, and certifications. Our employees value the flexibility at CACI that allows them to balance quality work and their personal lives. We offer competitive compensation, benefits and learning and development opportunities. Our broad and competitive mix of benefits options is designed to support and protect employees and their families. At CACI, you will receive comprehensive benefits such as; healthcare, wellness, financial, retirement, family support, continuing education, and time off benefits. Learn more here

The proposed salary range for this position is:

$68,400 - 143,700 USD

General Maintenance Mechanic - TS/SCI REQUIRED

Job Category: Engineering and Technical Support

Time Type: Full time

Minimum Clearance Required to Start: TS/SCI

Employee Type: Regular

Percentage of Travel Required: Up to 10%

Type of Travel: Local

* * *

CACI has an immediate need for a General Maintenance Technician to support our mission critical government customer in Fort Meade, MD.

What You’ll Get to Do:

As the selected candidate, you will, in part be responsible for completing various general and specialized trade skills, including but not limited to; electrical, carpentry, painting, concrete, plumbing, welding, drywall installing or repair of various ceiling systems.   

 

More About the Role:

• Duties may also include maintenance of the structure surrounding a facility such as fencing and gates

• Responsible for infrastructure sustainment activities

• Repair and change locks in the building and perform complex lock servicing to ensure maximum safety of all people

• Responsible for developing supply estimates for various projects, gathering technical data, evaluating/formulating safety procedures, material and fiscal requirements for assigned projects

• May assist project coordinator in planning, cost estimating, designing, developing and completing local projects

• Possess a working knowledge of laws, policies and procedures pertaining to the construction work environment, i.e., Occupational Safety and Health Administration (OSHA), facility, system equipment security, Environmental Compliance Assessment Protocol (ECAP) and National Electrical Code (NEC  

• Apply electrical, mechanical and structural knowledge to perform duties as assigned and as required to interpret construction and building blueprints periodically

• Duties may also include maintenance of the structure surrounding a facility such as fencing and gates

• Able to lift and/or carry objects up to 50 pounds, as well as climb ladders, walking up several flights of stairs, working on elevated surfaces and/or work in unusual or uncomfortable body positions or environmental conditions

• Some positions involve performance of work outdoors during various weather conditions

You’ll Bring These Qualifications:

• Vocational or High School Diploma or equivalent, and at least three (3) year's experience as a General Maintenance Mechanic.

What We Can Offer You:

• We’ve been named a Best Place to Work by the Washington Post.

• Our employees value the flexibility at CACI that allows them to balance quality work and their personal lives.

• We offer competitive benefits and learning and development opportunities.

• We are mission-oriented and ever vigilant in aligning our solutions with the nation’s highest priorities.

• For over 60 years, the principles of CACI’s unique, character-based culture have been the driving force behind our success.

Company Overview:

CACI is an Equal Opportunity/Affirmative Action Employer.  All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or any other protected characteristic.

Pay Range: There are a host of factors that can influence final salary including, but not limited to, geographic location, Federal Government contract labor categories and contract wage rates, relevant prior work experience, specific skills and competencies, education, and certifications. Our employees value the flexibility at CACI that allows them to balance quality work and their personal lives. We offer competitive compensation, benefits and learning and development opportunities. Our broad and competitive mix of benefits options is designed to support and protect employees and their families. At CACI, you will receive comprehensive benefits such as; healthcare, wellness, financial, retirement, family support, continuing education, and time off benefits. Learn more here

The proposed salary range for this position is:

$50,500 - $101,000

Cyber Security - Information Assurance Technician (IAT II)

Job Category: Information Technology

Time Type: Full time

Minimum Clearance Required to Start: TS/SCI

Employee Type: Regular

Percentage of Travel Required: Up to 10%

Type of Travel: Continental US

* * *

ACI is seeking a Cyber Security Engineer to join our team in Aberdeen Proving Ground, MD  The ideal candidate will be responsible for ensuring IT system compliance with all applicable laws, DoD policies, and standards.  Perform system scans, analyze results, and write necessary reports and plans. Provide Network Environment (NE) and Computing Environment (CE) support, including implementing all applicable IA vulnerability alerts (IAVA), IA vulnerability bulletins (IAVB), and technical advisories (TA). Develop and implement Standard Operating Procedures (SOPs), System Security Plans (SSP), Plans of Actions and Milestones (POA&Ms), and other related documents to satisfy Assessment and Authorization (A&A) requirements per NIST 800-53, FISMA, Risk Management Framework (RMF) and other government guidelines, as required to achieve and maintain an ATO (Authority to Operate).

What You’ll Get to Do:

• Implement and apply technologies, processes, and practices designed to protect networks, devices, programs, and data from malicious attack, damage, or unauthorized access.

• Maintain computer systems, networks, and other related device, including implementing all applicable IA vulnerability alerts (IAVA), IA vulnerability bulletins (IAVB), and technical advisories (TA).

• Investigate IT-related security incidents to determine the extent of compromise to national security information and automated information systems. May provide intrusion support to high technology investigations in the form of network assessments.

• Researches and maintains proficiency in tools, techniques, countermeasures, and trends in computer and network vulnerabilities, data hiding and network and device security and encryption. Performs duties in support of in-house and external customers.

• Configures and validates secure systems, and tests security products/systems to detect computer and information security weaknesses.

• Generates security architecture documentation.

• Provides critical written and verbal analyses of previously generated security architecture documentation and vulnerability and risk assessments.

• Develop and implement documentation to satisfy NIST 800-53, FISMA, and Risk Management Framework (RMF) requirements. Designs and implements Plans of Action and Milestones (POAM) to remediate findings from vulnerability and risk assessments. Provides information assurance for digital information, ensuring its confidentiality, integrity, and availability. Responsibilities include monitoring and testing of IT systems for vulnerabilities and indications of compromise, incident response and remediation, and compliance with applicable government and other external standards.

You’ll Bring These Qualifications:

• An active DoD TS/SCI Clearance.

• Be able to obtain a Poly.

• Must have at least 5 years of interpreting and implementing DoD directives, instructions, and policies that provide direction and guidance and applying them to CE and NE.

• Knowledge of the Assessment & Authorization (A&A), and NIST RMF processes.

• Experience installing, maintaining, administering, and troubleshooting computer systems and networks.

• Experience with network security architecture to include, but not limited to firewalls, intrusion detection/prevention systems (IDS/IPS), content filtering devices, encryption devices, and DoD Public Key Infrastructure (PKI).

• Qualified at the IAT Level II for the DoD Information Assurance Workforce, must possess one of the following certifications:  CCNA-Security, GICSP, GSEC, Security+, or SSCP.

These Qualifications Would be Nice to Have:

• An active DoD TS/SCI with Poly Clearance.

• Familiar with scanning tools (e.g. NESSUS, ACAS, etc.). Familiar with Distributed Common Ground System (DCGS).

• Technical Writing experience (creating/updating IA policy & procedure documentation).

• Excellent written and verbal communication skills with strong presentation abilities.

• Must be able to work well on independent engagements as well as within a team setting; Strong client presence and interaction abilities.

• Excellent understanding of common computing platforms, including Windows Server, RedHat Linux Server, and vendor-specific appliance support.

• Some understanding of military hierarchy.

What We Can Offer You:

- We’ve been named a Best Place to Work by the Washington Post.

- Our employees value the flexibility at CACI that allows them to balance quality work and their personal lives.

- We offer competitive benefits and learning and development opportunities.

- We are mission-oriented and ever vigilant in aligning our solutions with the nation’s highest priorities.

- For over 60 years, the principles of CACI’s unique, character-based culture have been the driving force behind our success.
 

Company Overview:

CACI is an Equal Opportunity/Affirmative Action Employer.  All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or any other protected characteristic.

Pay Range: There are a host of factors that can influence final salary including, but not limited to, geographic location, Federal Government contract labor categories and contract wage rates, relevant prior work experience, specific skills and competencies, education, and certifications. Our employees value the flexibility at CACI that allows them to balance quality work and their personal lives. We offer competitive compensation, benefits and learning and development opportunities. Our broad and competitive mix of benefits options is designed to support and protect employees and their families. At CACI, you will receive comprehensive benefits such as; healthcare, wellness, financial, retirement, family support, continuing education, and time off benefits. Learn more here

The proposed salary range for this position is:

$75,200 - 158,100 USD

Composites Technician

Job Category: Engineering and Technical Support

Time Type: Full time

Minimum Clearance Required to Start: Secret

Employee Type: Regular

Percentage of Travel Required: Up to 10%

Type of Travel: Continental US

* * *

What You’ll Get to Do:
CACI is seeking a Composites Technician who will be working as part of a multidisciplinary team fabricating, modifying, assembling, installing, and repairing composite parts and tooling for prototype parts, equipment, and vehicles. You will also be responsible for managing necessary materials and supplies and maintaining the composite shop facilities. This position is located at Aberdeen Proving Grounds, MD.

More About the Role:

• Review engineering design to develop composite layup schedule.
• Develop technical package for devices to include build instructions.
• Assist in prototype design from customer requirements and help develop associated design and technical packages.
• Perform all functional duties independently.
• Collaborate with multidisciplinary team to resolve design and documentation discrepancies.
• Collaboration to ensure cohesive electro-mechanical design and integration.
• Responsible for the sourcing all required components for each assigned project.
• Innovative and mechanically oriented mindset; looks for ways to improve processes and promote quality.

You’ll Bring These Qualifications:

• Active Secret clearance and able to obtain a TS/SCI clearance.
• 5+ years of experience doing fiberglass/carbon fiber/Kevlar/etc. layups and repairs.
• Ability to hand laminate, set up infusions, and work with prepreg fabrics.
• Knowledge on multiple different layup techniques
• Familiarity with different core materials (balsa, foam, honeycomb)
• Proficient with bagging techniques and materials for wet layups, infusions, and prepreg including the use of pleats, release layers, peel plies, breathers, bleeders, flow media, bagging films, etc.
• Capable of embedding parts into layups for hatches, hardware,

additional strength, joiners, and connectors

• Proficient in preparing a mold for a wet and pre-preg layup to be released from the mold without damage.
• Adept in finishing composite parts to prepare them for bonding, painting, or other finishing techniques.
• Experience using power tools (Examples: hand drill / drill press, circular saw, sander, Dremel, miter saw, belt sander, table saw, etc.)

These Qualifications Would be Nice to Have:

• Solidworks Experience – ability to work with parts and assemblies, to create designs that for manufacturing.
• Unmanned Aerial System (UAS) Build Experience with amateur or professional UASs using composites.
• Experience with using desktop 3D printers, CNC machines, hot wire cutters, and laser cutters.

What We Can Offer You:

- We’ve been named a Best Place to Work by the Washington Post.

- Our employees value the flexibility at CACI that allows them to balance quality work and their personal lives.

- We offer competitive benefits and learning and development opportunities.

- We are mission-oriented and ever vigilant in aligning our solutions with the nation’s highest priorities.

- For over 60 years, the principles of CACI’s unique, character-based culture have been the driving force behind our success.
 

Company Overview:

CACI is an Equal Opportunity/Affirmative Action Employer.  All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or any other protected characteristic.

Pay Range: There are a host of factors that can influence final salary including, but not limited to, geographic location, Federal Government contract labor categories and contract wage rates, relevant prior work experience, specific skills and competencies, education, and certifications. Our employees value the flexibility at CACI that allows them to balance quality work and their personal lives. We offer competitive compensation, benefits and learning and development opportunities. Our broad and competitive mix of benefits options is designed to support and protect employees and their families. At CACI, you will receive comprehensive benefits such as; healthcare, wellness, financial, retirement, family support, continuing education, and time off benefits. Learn more here

The proposed salary range for this position is:

$57,500 - 117,900 USD