The Aviation Safety Inspector (ASI) receives administrative direction from management in terms of broadly defined missions or functions. The ASI, mostly independently plans, designs, and carries out programs, projects, studies, or other work. The work is normally accepted without change. Completed work may be reviewed for adherence to FAA policy and for assurance that project requirements have been fulfilled.

Some FG-14 assignments involve service wide responsibility for application of expert knowledge of flight operations for advanced multiengine turbojet aircraft. Such employees are concerned with all aspects of the operational capabilities and limitations of the aircraft.

ASIs at the FG-14 level establish technical procedures and performance indexes and review complete flight operations programs for leaders in the aviation industry, or organizations of comparable scope and complexity, or a uniquely complex group of general aviation organizations. Assignments at this level are of great scope and unusual complexity.

FG-14 employees develop and evaluate flight operations programs for organizations which utilize the newest, most complex aircraft, systems, and equipment. Because of organizational complexity or technology incorporated in the aircraft, systems, and equipment, employees must exercise originality to resolve unique problems. They frequently rely on engineers and designers for specific technical guidance although much of their work is carried out under very broad policy guidelines. Supervisors give FG-14 employees a wide leeway for independent action. Other inspectors seek their advice on problems relating to aircraft and their operation. Because of the precedent-setting nature or substantial effect on the aviation industry or public safety, their decisions may be reviewed and approved at a higher policy- setting level.

The ASI resolves all but unique problems, with the intervention of management or a technical specialist. Develop plans, techniques, and policies to address current and anticipated problems and issues. Works with management to solve problems.

The ASI is expected to follow established laws, orders, policies, and regulations that provide general guidance for completing work objectives, but is allowed considerable discretion to develop new or innovative approaches. The ASI uses resourcefulness, initiative, and judgement based on experience to develop and implement evaluation procedures to address problems where precedents are not applicable. Methods, practices, or decisions may be used as guidance in similar problem areas.

The ASI keeps management informed of the status of all programs and projects and is held accountable for the technical accuracy, proper coordination, and timeliness of completed staff work. Provides staff assistance and serves as advisor to the manager on all matters pertaining to assigned tasking. Assists Safety Assurance ASI’s, aviation safety technicians, and others on queries that are technical or guidance related.

Assists in the preparation of a variety of technical and high priority correspondence to the other functional offices, aviation industry, other governmental agencies, members of Congress, and the general public. Assures that correspondence is properly coordinated, technically and grammatically accurate, clear and concise, and that it reflects the philosophy, policies, and objectives of the Division, Service, and the FAA.

Participates in the FAA flight program to maintain qualification and currency requirements applicable to operations inspectors, for the purpose of supporting the FAA in a variety of flight-related functions to include training and evaluation of designated pilot examiners. Evaluates tasks contained in the FAA practical test standards and airman certification standards by participating as pilot in command or as a crewmember. The inspector is required to maintain an FAA second class medical.

Performs other duties as required.

• Contribute senior leadership and participates in regional business processes such as strategic planning, workload sharing, and quality management for engineering and construction.
• Serve as Division senior technical advisor to the districts in their discipline on engineering activities, responsible for the competence of projects designed and built in the Division.
• Provide leadership for solutions of advanced, unprecedented engineering problems to key managers, counterparts at the districts, higher headquarters, Corps research and development laboratories, and other Corps, government, and private interests.
• Participate in Regional and national-level meetings, workshops, committees, professional conferences, inter-agency panels, and boards for exchange of technical information and advice on matters regarding engineering.

Lead and oversee implementation of NCTC's Standard Minimization Procedures governing access to unminimized FISA information, including but not limited to:

Leading and facilitating NCTC participation in Department of Justice Oversight Reviews.

Participating in regularly scheduled interagency working groups.

Development, in consultation with NCTC Legal, of all FISA training materials and job aids for the NCTC workforce.

Drafting of information technology development requirements for systems processing and storing FISA data.

Management of user focus groups for IT systems processing and storing FISA data.

Creation and coordination of NCTC input to all FISA oversight reports and transparency releases related to the NCTC FISA program.

Collaborate with mission, IT, legal, and policy offices to develop IT requirements for the use and handling of sensitive datasets to advance mission use of data while ensuring compliant data handling pursuant to legal authorities, data provider agreements, and internal policy.

Continually expand personal expertise with regard to the development and implementation of information sharing tools, technology, plans, and policies to facilitate the cooperation and effective coordination of the Office of the Director of National Intelligence (ODNI), the IC, and other U.S. Government agencies.

Plan, develop, and implement programs, policies, and procedures that result in the effective sharing of information across the Government while protecting Intelligence and Law Enforcement sources and methods, operational equities, and U.S. persons' privacy.

Plan, develop, and oversee the implementation of interagency information sharing activities and programs by coordinating and integrating the competing requirements and priorities of multiple stakeholders, to include planning and participating in interagency meetings.

Plan, prepare, and present briefings, reports, and presentations to ODNI leadership, senior policymakers, IC members, and other intelligence consumers in a manner that meets their specified requirements.

Lead and oversee implementation of NCTC's Standard Minimization Procedures governing access to unminimized FISA information, including but not limited to:

Leading and facilitating NCTC participation in Department of Justice Oversight Reviews.

Participating in regularly scheduled interagency working groups.

Development, in consultation with NCTC Legal, of all FISA training materials and job aids for the NCTC workforce.

Drafting of information technology development requirements for systems processing and storing FISA data.

Management of user focus groups for IT systems processing and storing FISA data.

Creation and coordination of NCTC input to all FISA oversight reports and transparency releases related to the NCTC FISA program.

Collaborate with mission, IT, legal, and policy offices to develop IT requirements for the use and handling of sensitive datasets to advance mission use of data while ensuring compliant data handling pursuant to legal authorities, data provider agreements, and internal policy.

Continually expand personal expertise with regard to the development and implementation of information sharing tools, technology, plans, and policies to facilitate the cooperation and effective coordination of the Office of the Director of National Intelligence (ODNI), the IC, and other U.S. Government agencies.

Plan, develop, and implement programs, policies, and procedures that result in the effective sharing of information across the Government while protecting Intelligence and Law Enforcement sources and methods, operational equities, and U.S. persons' privacy.

Plan, develop, and oversee the implementation of interagency information sharing activities and programs by coordinating and integrating the competing requirements and priorities of multiple stakeholders, to include planning and participating in interagency meetings.

Plan, prepare, and present briefings, reports, and presentations to ODNI leadership, senior policymakers, IC members, and other intelligence consumers in a manner that meets their specified requirements.

Support the development, implementation, and monitoring of a mission compliance program that includes internal control activities, risk assessments, standards and procedures, awareness and training, and verification and assessment to ensure compliance with applicable laws and regulations.

Develop and implement comprehensive mission compliance solutions.

Liaise and maintain effective working relationships with ODNI and NCTC stakeholders, including, IT, legal, and policy offices to address issues that span multiple mission or program areas.

Participate in strategic decision-making processes. Provide advice to the CTG Chief and Deputy Chief on issues related to CTG business activities and day-to-day operations.

Manage compliance incidents, including identifying root causes and assessing impact of incidents.

Produce documentation related to compliance incidents, compliance processes, and compliance risk management.

Engage in interagency information sharing activities and programs by coordinating and integrating the competing requirements and priorities of multiple stakeholders, to include planning and participating in interagency meetings.

Prepare briefings and reports for presentations to ODNI leadership, senior policymakers, IC members, and other intelligence consumers in a manner that meets their specified requirements.

Other duties, as assigned.

Build your best future with the Johnson Controls team

As a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet.  Join a winning team that enables you to build your best future! Our teams are uniquely positioned to support a multitude of industries across the globe. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience, focused on supporting their physical, financial, and emotional wellbeing. Become a member of the Johnson Controls family and thrive in an empowering company culture where your voice and ideas will be heard – your next great opportunity is just a few clicks away!

What we offer

Competitive salary and bonus

Paid vacation/holidays/sicktime - 15 days of vacation first year

Comprehensive benefits package including 401K, medical, dental, and vision care - Available day one

Extensive product and on the job/cross training opportunities with outstanding resources

Encouraging and collaborative team environment

Dedication to safety through our Zero Harm policy

JCI Employee discount programs (The Loop by Perk Spot)

What you will do:

The Sprinkler Inspector II is responsible for meeting customer expectations while performing quality inspections, performing quality NFPA 25 inspections.

How you will do it:

• Perform routine inspections, testing, servicing, installing and preventative maintenance of life safety product lines as well as similar competitive manufacturer's product line.

• Learn to complete Service Acknowledgements with proper coding through communication devices, such as laptop computers and/or hard copy.

• Follow and maintain a highly structured inspection schedule.

• Input, retrieve and archive inspection documentation program via the laptop computer.

• Make minor repairs to fire sprinkler systems.

• Complete assigned inspections on time.

• Perform other duties as assigned.

• Travel 50% to eastern Washington to Northern Idaho

What we look for:

Required

• High School Diploma or equivalent required.

• 1-2 years documented experience in sprinkler systems preferred

• Able to obtain and retain any licenses that are required by National, State and Local codes.

• Experience with hand tools.

• Experience with wet, dry, pre-action, deluge, fire pumps, and foam systems

• Demonstrates an aptitude for troubleshooting systems and performing necessary repairs.

• Capable of performing physical labor to include carrying and moving equipment and tools up to 50-70 lbs.

• Able to work in unusual and sometimes difficult position such as climbing ladders, scaffolding and high lift equipment up to 40 feet, working within ducts, crawl spaces, above ceilings, etc.

• Ability to work flexible hours including on-call rotation, nights, and weekends to meet customer requirements.

• Willing to travel out of town including overnight lodging.

• Demonstrate a high level of customer service.

• Ability to adhere to, implement, and always follow safety guidelines and procedures.

• Strong organizational skills, positive attitude, and an ability to learn quickly.

• Possess a valid driver’s license and driving record that meets company requirements.

• Able to pass a pre-employment background and drug test. 

HIRING HOURLY RANGE: $17.00  - $23.00 (Hourly rate to be determined by the education, experience, knowledge, skills, and abilities of the applicant, internal equity, and alignment with market data.)  This position includes a competitive benefits package. For details, please visit the Employee Benefits tab on our main careers page at https://www.johnsoncontrols.com/careers

Applications are accepted on an ongoing basis

Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

Unleash your potential with the Johnson Controls team!

As a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet. Join our winning team and pave the way for a bright future. With our extensive reach across various industries worldwide, our teams are uniquely positioned to support and empower you. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience, focused on supporting their physical, financial, and emotional wellbeing.

Join the Johnson Controls family and thrive in a culture that values your voice and ideas.

Your next incredible opportunity is just a few clicks away!

Here's what we have to offer

• Competitive pay.
• Paid vacation, holidays, and sick time.
• Comprehensive benefits package, including 401K, medical, dental, and vision care - available from day one.
• Extensive product and on-the-job/cross-training opportunities, supported by our outstanding internal resources.
• Encouraging and collaborative team environment.
• Dedication to safety through our Zero Harm policy.
• Company vehicle, tools, and equipment provided to complete all jobs.
• Scheduling and management support.
• JCI Employee discount programs (The Loop by Perk Spot).

What you will do

As a Johnson Controls Security Service Technician, you will alleviate concerns the customer may have regarding a security system. You will advise customers and the customer care center of the status of systems and processes inspections. You will inspect fire systems, burglar alarm systems, CCTV, and access.

How you will do it

• Locate all devices and make sure they are in working order.
• Readjust equipment, repair, or replace inoperative equipment, and test for operation.
• Prepare inspection reports and create tickets for major repairs.
• Responsible for the inspection of commercial Security/Fire Alarm/CCTV/Card Access systems.

What we look for  

Required

• High School Diploma or equivalent required
• Experience with Fire Alarm, security, CCTV, card access
• Knowledge of test equipment, multi-meter, digital analyzer, and commissioning devices
• Experience inspecting, repairing, and programming fire alarm panels and fire suppression systems Computer literate.
• Ability to follow verbal and written instructions.
• Capable of performing physical labor to include carrying and moving equipment and tools up to 50-70 lbs.
• Able to work in unusual and sometimes difficult positions such as climbing ladders, scaffolding, and high lift equipment up to 40 feet, working within ducts, crawl spaces, above ceilings, etc.
• Ability to work flexible hours including weekends to meet customer requirements.
• Demonstrate a high level of customer service.
• Maintain truck inventory to ensure timely response to customer needs
• Ability to adhere to, implement, and follow safety guidelines and procedures at all times
• Strong organizational skills, a positive attitude, and an ability to learn quickly
• Possess a valid driver’s license and driving record that meets company requirements
• Able to pass a pre-employment background and drug test
• Retain any licenses that are required by National, State, and Local codes - Oregon state low voltage electrical license

 Preferred

• 2 years of documented experience in low-voltage electrical systems.
• NICET II certification.

JCI employees are valued members of the Johnson Controls family. They are dedicated, skilled, and passionate individuals who contribute to the success and growth of our company. We prioritize creating a positive and inclusive work environment that fosters collaboration, innovation, and personal development. Our employees are encouraged to voice their ideas and opinions, knowing that they will be heard and valued. We believe in investing in our employees' well-being, providing competitive salaries, comprehensive benefits packages, and opportunities for career advancement. With a strong emphasis on safety and a commitment to sustainability, JCI employees play a crucial role in shaping a smarter, healthier, and more sustainable future for buildings and communities worldwide.

#LI-Onsite

Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

CACI is looking for a full-time Senior Financial Control Analyst to join our dynamic team in providing a wide range of financial support duties to accomplish critical objectives.

Our contracts offer a diverse selection of labor categories, job types, and locations within the Washington metropolitan area with competitive benefits, salaries and internal growth opportunities (e.g., career advancement opportunities, professional training, and tuition reimbursement.) If you are a motivated individual looking to be a part of critical mission, CACI would like to speak with you.

For additional information regarding CACI’s outstanding benefits and career developing tools, please visit www.CACI.com.

What you’ll get to do:

• Resolves financial discrepancies.

• Main contact for financial matters.

• Evaluates and develops financial information.

• Offers financial recommendations.

• Processes financial data.

• Become aware of financial rules to complete daily financial tasks.

• Responsible for ad hoc or other tasks relevant to the role.

You’ll Bring these Qualifications:

• TS/SCI with Polygraph

• Three years performing financial records processing and management.

• Strong communication skills.

Education:

• Associate’s Degree in finance, business administration, or a closely related field.

• Equivalent relevant experience may be substituted for the education requirement on a year for year basis.

What We Can Offer You:

• We’ve been named a Best Place to Work by the Washington Post.

• Our employees value the flexibility at CACI that allows them to balance quality work and their personal lives.

• We offer competitive benefits and learning and development opportunities.

• We are mission-oriented and ever vigilant in aligning our solutions with the nation’s highest priorities.

• For over 60 years, the principles of CACI’s unique, character-based culture have been the driving force behind our success.

CACI is an Equal Opportunity Employer - Females/Minorities/Protected Veterans/Individuals with Disabilities.

Company Overview:

CACI is an Equal Opportunity/Affirmative Action Employer.  All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or any other protected characteristic.

Pay Range: There are a host of factors that can influence final salary including, but not limited to, geographic location, Federal Government contract labor categories and contract wage rates, relevant prior work experience, specific skills and competencies, education, and certifications. Our employees value the flexibility at CACI that allows them to balance quality work and their personal lives. We offer competitive compensation, benefits and learning and development opportunities. Our broad and competitive mix of benefits options is designed to support and protect employees and their families. At CACI, you will receive comprehensive benefits such as; healthcare, wellness, financial, retirement, family support, continuing education, and time off benefits. Learn more here

The proposed salary range for this position is:

What You Will Achieve

• This role will be the primary point of contact for US Market Transport (MT) compliance with EHS/ESG and GSC Global Sustainability requirements.

• This role will support and grow the MT Sustainability capability through industry benchmarking, tracking/visibility using IMEx processes and tools, and provide project management for MT projects.

• This role supports daily operations and is the primary contact for Logistic Center and Customer Service stakeholders.

• This role also directly supports the other MT capabilities (Enablement, Systems, Compliance, Freight Audit and Pay).

How You Will Achieve It

Market Transport Sustainability primary point of contact:

• Lead the MT Sustainability capability and work directly with EHS/ESG and GSC Global Sustainability colleagues to ensure compliant CO2e reporting.

• Accountability for supporting CO2e reduction projects through project management and thought leadership.

• Work directly with transportation suppliers to identify CO2e reduction pilots and develop the business case for LT consideration.

• Incorporate CO2e reduction methodologies into MT business practices and processes.

Support and grow the Market Transport Sustainability capability:

• Develop standard work process flows and controls for the MT Sustainability capability.

• IMEX compliance: ensure all MT Sustainability projects are effectively managed in DOC/CI Loop.

• Participate in internal and external benchmarking and thought leadership forums.

• Lead or co-lead proper change management for the implementation of sustainable MT solutions.

Operations Support:

• Act a primary contact for issue mitigation for Logistic Centers and the three customer service groups.

Support other capabilities within Market Transport

• US import operations and expense tracking.

• Support carrier qualification process as needed.

• Support transport data management solutions (TMS/SAP/Freight Audit and Pay).

• MT Quality and Compliance requirements.

Qualifications

Must-have

• Bachelor’s degree in Logistics/Transportation, Business Administration, engineering, Supply Chain or corresponding experience.

• 5+ years transportation, engineering, customer service, supply chain or logistics experience.

• Experience with Sustainability concepts and reporting.

• Strong analytical skills and very proficient in MS Office Suite programs and database mining.

• Strong inter-personal skills. 

• Comfortable managing supplier relationships, working in cross-functional teams, and presenting ideas and concepts to senior management.

• Experience with Transportation Management, Warehouse Management, Supply chain and ERP Systems.

• Strong project management, communication, presentation, and data analysis are required.

• Knowledge of operational excellence methodologies (six sigma, lean, etc.)

Non-Standard Work Schedule, Travel, or Environment Requirements

• Work Location Assignment: On Premise.

Other job details

• Last day to apply: March 26, 2024.

Relocation assistance may be available based on business needs and/or eligibility.

Why Patients Need You

Everything we do, every day, is in line with an unwavering commitment to the quality and the delivery of safe and effective products to patients.  Our science and risk-based compliant quality culture is flexible, innovative, and customer oriented. Whether you are involved in development, maintenance, compliance or analysis through research programs, your contribution will directly impact patients.

What You Will Achieve

This position is for a testing analyst in the Kalamazoo Laboratory working on third shift.  Opportunity for schedule flexibility exists as the Laboratory supports business and customer needs on weekends and holidays.   Technologies employed in the Rapid Turn Laboratory include HPLC, GC, titrations, Karl Fisher, UV, and general analytical procedures. You will be developing and applying your knowledge of procedures, techniques, tools, materials and equipment. Your receptiveness to new ideas will enhance the team’s ability to achieve goals and targets.  You will follow standard procedures to complete tasks and identify process issues or problems that involve direct application of your skills/knowledge.

It is your hard work and commitment that will make Pfizer ready to achieve new milestones and help patients across the globe.

How You Will Achieve It

• Manage own time, professional development and accountable for own results.
• Prioritize own workflow and assist in prioritizing the workflow of less-experienced colleagues.
• Responsible for maintaining laboratory compliance.
• Interpret and evaluate data in terms of accuracy, precision, trends, and potential Good Manufacturing Practices {also cGMP} impact and recommends appropriate corrective action where necessary.
• Perform, document, record check, and troubleshoot qualitative or quantitative assays on samples using techniques that vary from use of standard laboratory equipment to highly modern and automated instrumentation.
• Perform testing for semi-finished goods and finished goods testing, validation sample, and other testing in accordance with approved procedures and test methods, and record the test results in timely manner.
• Investigate, analyze, problem solve, and communicate technical information to internal and external customers.
• Ensure all reagents and reference standards are valid and stored according to requirement.
• Comprehend and perform both routine and non-routine analyses from compendia and internal sources.
• Work effectively in a fast-paced, customer-oriented, team laboratory environment to analyze samples in the Rapid Turn Laboratory.
• Train and support less experienced analysts, working as a Certified Fellow Employee and mentor to aid in their development as analysts.

Qualifications

Must-Have

• High School Diploma or GED and at least 4 years of relevant experience in quality or compliance required.  Candidates with advanced science degrees and relevant experience may also be considered as follows:  Associate’s degree in Chemistry, Biochemistry or related science degree with at least 3 years experience in related field or Bachelor’s degree in Chemistry, Biochemistry or related science with at least 1 year of experience in related field.  
•  4+ years' experience
• Demonstrated proficiency in at least one high complexity technology (e.g. HPLC, uHPLC, GC, etc.) or, with two or more low to medium complexity technologies (e.g. TLC, titrations, wet chemistry/physical testing, water testing, etc.) as required by the business unit. 
• The successful candidate must also have demonstrated the ability to quickly learn new skills/techniques.  
• High productivity and the ability to multi-task coupled with a low error rate and attention to detail.
• Must demonstrate flexibility/agility and engagement in a changing environment.  
• The candidate is expected to display good laboratory technique to avoid cross-contamination or misidentification of samples.  
• Experience troubleshooting test methods and analytical instrumentation.

Nice-to-Have

• Demonstrate proficiency in computerized systems, such as Laboratory Information Management System

PHYSICAL/MENTAL REQUIREMENTS

Laboratory and office work requiring walking, standing, and sitting throughout a shift.  Lifting of items less than 25 kg.  

NON-STANDARD WORK SCHEDULE, TRAVEL OR ENVIRONMENT REQUIREMENTS

This position requires colleagues to work weekends and/or holidays to meet business or customer needs.  All Laboratory colleagues adhere to safe work practices such as wearing appropriate personal protective equipment including lab coat, safety glasses, and gloves.   There is no routine travel associated with this position.  

OTHER JOB DETAILS

Last Date to Apply for Job: 3/26/24
Relocation support available
Work Location Assignment: On Premise

Relocation assistance may be available based on business needs and/or eligibility.

Why Patients Need You

Everything we do, every day, is in line with an unwavering commitment to the quality and the delivery of safe and effective products to patients.  Our science and risk-based compliant quality culture is flexible, innovative, and customer oriented. Whether you are involved in development, maintenance, compliance or analysis through research programs, your contribution will directly impact patients.

What You Will Achieve

This position is for a testing analyst in the Kalamazoo Laboratory working on third shift.  Opportunity for schedule flexibility exists as the Laboratory supports business and customer needs on weekends and holidays.   Technologies employed in the Rapid Turn Laboratory include HPLC, GC, titrations, Karl Fisher, UV, and general analytical procedures.

You will be developing and applying your knowledge of procedures, techniques, tools, materials and equipment. Your receptiveness to new ideas will enhance the team’s ability to achieve goals and targets.  You will follow standard procedures to complete tasks and identify process issues or problems that involve direct application of your skills/knowledge.

It is your hard work and focus that will make Pfizer ready to achieve new milestones and help patients across the globe.

How You Will Achieve It

• Manage own time, professional development and be accountable for own results.
• Contribute to the completion of specific team objectives and assigned project milestones.
• Complete training activities and maintain records, equipment, basic lab supplies, and reagents in accordance with current Good Manufacturing Practices {part of GxP} requirements.
• Perform equipment and laboratory maintenance.
• Create new Master Data of varying technical complexity.
• Manage sampling materials and data summary in computer software, incubation and readout of results along with documentation of results.
• Able to follow prescribed policies and procedures.

Qualifications

Must-Have

• High School Diploma or GED and at least 3 years of relevant experience in quality or compliance required.  Candidates with advanced science degrees and relevant experience may also be considered as follows:  Associate’s degree in Chemistry, Biochemistry or related science degree with at least 2 years experience in related field or Bachelor’s degree in Chemistry, Biochemistry or related science with 0-1 years of experience in related field.
• Capable of manual manipulations with dexterity
• Knowledge and demonstration of leadership principles
• Well organized, able to work on multiple projects
• Ability to work both independently and as part of a team
• Good oral, written and interpersonal communication skills within a diverse team setting
• Demonstrated proficiency in at least one high complexity technology (e.g. HPLC, uHPLC, GC, etc.) or, with two or more low to medium complexity technologies (e.g. TLC, titrations, wet chemistry/physical testing, water testing, etc.) as required by the business unit.
• The successful candidate must also have demonstrated the ability to quickly learn new skills/techniques. 
• High productivity and the ability to multi-task coupled with a low error rate and attention to detail.
• Must demonstrate flexibility/agility and engagement in a changing environment. 
• The candidate is expected to display good laboratory technique to avoid cross-contamination or misidentification of samples. 
• Experience troubleshooting test methods and analytical instrumentation.

Nice-to-Have

• Experience in Laboratory Information Management System

PHYSICAL/MENTAL REQUIREMENTS

Laboratory and office work requiring walking, standing, and sitting throughout a shift.  Lifting of items less than 25 kg.  

NON-STANDARD WORK SCHEDULE, TRAVEL OR ENVIRONMENT REQUIREMENTS

This position requires colleagues to work weekends and/or holidays to meet business or customer needs.  All Laboratory colleagues adhere to safe work practices such as wearing appropriate personal protective equipment including lab coat, safety glasses, and gloves.   There is no routine travel associated with this position.  

OTHER JOB DETAILS

Last Date to Apply for Job: 3/26/24

Work Location Assignment: On Premise

Relocation support available

Relocation assistance may be available based on business needs and/or eligibility.

Why Patients Need You

Everything we do, every day, is in line with an unwavering commitment to the quality and the delivery of safe and effective products to patients.  Our science and risk-based compliant quality culture is flexible, innovative, and customer oriented. Whether you are involved in development, maintenance, compliance or analysis through research programs, your contribution will directly impact patients.

What You Will Achieve

This position is for a testing analyst in the Kalamazoo QO Rapid Turn Laboratory working on third shift.  Opportunity for schedule flexibility exists as the Laboratory supports business and customer needs on weekends and holidays.   Technologies employed in the Rapid Turn Laboratory include HPLC, GC, titrations, Karl Fisher, UV, and general analytical procedures.

How You Will Achieve It

• Works effectively in a fast-paced, customer-oriented, team laboratory environment to analyze in-process materials, solvents, raw materials, APIs, and/or finished product samples in direct support of the company's production units.  Independently performs testing and documents results for qualitative or quantitative assays on samples using techniques that vary from use of standard laboratory equipment to highly modern and automated instrumentation.  Troubleshoots test methods and analytical equipment.  Conducts peer review (record checking) of laboratory data packets. Writes equipment qualification protocols and reports as needed.  Executes method validation activities as needed.  Updates SOPs and test methods.  Writes reports as needed.
• The successful candidate is a subject matter expert in at least one basic analytical chemistry technology.  The candidate should also be able to assist in Laboratory Investigation Reports, either by lending expertise or leading.
• Coordinates and leads projects that have unit impact.  Proactively seeks out opportunities for improvement and acts on them with some direction.

Qualifications

Must-Have

• High School Diploma or GED and at least 6 years of relevant experience in quality or compliance required.  Candidates with advanced science degrees and relevant experience may also be considered as follows:  Associate’s degree in Chemistry, Biochemistry or related science degree with at least 4 years experience in related field or Bachelor’s degree in Chemistry, Biochemistry or related science with at least 2 years experience in related field.  
• Demonstrated proficiency in at least one high complexity technology (e.g. HPLC, uHPLC, GC, etc.) or, with two or more low to medium complexity technologies (e.g. TLC, titrations, wet chemistry/physical testing, water testing, etc.) as required by the business unit. 
• The successful candidate must also have demonstrated the ability to quickly learn new skills/techniques.  
• High productivity and the ability to multi-task coupled with a low error rate and attention to detail.
• Must demonstrate flexibility/agility and engagement in a changing environment.  
• The candidate is expected to display good laboratory technique to avoid cross-contamination or misidentification of samples.  
• Experience troubleshooting test methods and analytical instrumentation.
• Experience in performing peer review of laboratory data.
• Candidate must have in depth technical knowledge in one or more analytical techniques, such that they would be considered a subject matter expert in the given technology.

Nice-to-Have

• Demonstrate proficiency in computerized systems, such as Laboratory Information Management System

PHYSICAL/MENTAL REQUIREMENTS

Laboratory and office work requiring walking, standing, and sitting throughout a shift.  Lifting of items less than 25 kg.  

NON-STANDARD WORK SCHEDULE, TRAVEL OR ENVIRONMENT REQUIREMENTS

This position requires colleagues to work weekends and/or holidays to meet business or customer needs.  All Laboratory colleagues adhere to safe work practices such as wearing appropriate personal protective equipment including lab coat, safety glasses, and gloves.   There is no routine travel associated with this position.  

OTHER JOB DETAILS

Last Date to Apply for Job: 3/26/24

Relocation support available
Work Location Assignment: On Premise

Relocation assistance may be available based on business needs and/or eligibility.

Job Family:

Travel Required:

Clearance Required:

What You Will Do:
Our finance professionals help our federal clients transform their business processes, improve internal controls, improve efficiency of operations, increase transparency and performance management, and to comply with Federal laws and regulations. We provide technical and coordination support over internal control assessments, corrective action planning, audit liaison support, project management, and technical support in the areas of Internal Control Over Financial Reporting.

The nature of our projects is extremely fluid and requires self-motivated individuals that are willing to develop solutions on their own or in a team of highly skilled professionals. Project members are provided the opportunity to interact with our clients' senior management, as well as the opportunity to enhance their skills in the area of technical competency, business development, client service and people development. Project members will provide specialized experience and knowledge in internal controls, financial management, process analysis, risk management and performance measurement to support/contribute to project activities

What You Will Need:

• US Citizenship and the ability to obtain and maintain a federal Public Trust;

• Bachelor’s degree in Finance, Accounting, Economics, Information Systems, Business Administration or Certified Public Accountant.

• 4+ years of experience in financial management, audit remediation, internal controls or related audit services;

• Ability to understand client needs, participate within a team environment, and communicate throughout internal and external network in a manner that allows for successful execution of tasks;

• Experience and demonstrated ability to participate in client-facing discussions and meetings;

• Ability to understand and analyze the impact of internal control assessment results on the Agency;

• Understanding of and experience conducting internal control assessments and testing in accordance with OMB Circular A-123, Appendix A requirements;

• Experience working in teams to produce high-impact work products, reports, and other deliverables;

• Strong oral and written communication skills; and

• Willingness to learn and participate in business development activities and internal firm objectives

What Would Be Nice To Have:

• Demonstrated knowledge and success in advising federal clients in improving internal controls over financial reporting and meeting the requirements of related federal guidance and requirements, including: OMB Circular A-123, Appendix A and C, the GAO Green Book, the Chief Financial Officers Act of 1990, Federal Managers’ Financial Integrity Act of 1982 (FMFIA), and Payment Integrity Information Act of 2019 (PIIA);

• Experience understanding deficiencies communicated by the auditor, tracking audit PBC requests, responding to audit requests, developing corrective action plans, and executing remediation with a focus on internal controls over financial reporting and management financial statement assertions;

• Experience evaluating/testing internal controls, performing financial statement audits (preferably for a Government agency), or providing audit readiness support; 

• Federal accounting, the Treasury Financial Manual, and knowledge of Federal Financial Management Improvement Act (FFMIA);

• Experience with Internal control over financial reporting and operations improvements, and related business process improvement;

• Experience with Entity level controls, risk management, and fraud risk assessments; 

• Implementation of new federal guidance into existing federal programs; and

• Federal audit support, audit liaison, corrective action planning, and remediation experience

What We Offer:

Guidehouse offers a comprehensive, total rewards package that includes competitive compensation and a flexible benefits package that reflects our commitment to creating a diverse and supportive workplace.

Benefits include:

• Medical, Rx, Dental & Vision Insurance

• Personal and Family Sick Time & Company Paid Holidays

• Position may be eligible for a discretionary variable incentive bonus

• Parental Leave and Adoption Assistance

• 401(k) Retirement Plan

• Basic Life & Supplemental Life

• Health Savings Account, Dental/Vision & Dependent Care Flexible Spending Accounts

• Short-Term & Long-Term Disability

• Student Loan PayDown

• Tuition Reimbursement, Personal Development & Learning Opportunities

• Skills Development & Certifications

• Employee Referral Program

• Corporate Sponsored Events & Community Outreach

• Emergency Back-Up Childcare Program

• Mobility Stipend

About Guidehouse
Guidehouse is an Equal Employment Opportunity / Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, national origin, ancestry, citizenship status, military status, protected veteran status, religion, creed, physical or mental disability, medical condition, marital status, sex, sexual orientation, gender, gender identity or expression, age, genetic information, or any other basis protected by law, ordinance, or regulation.

Guidehouse will consider for employment qualified applicants with criminal histories in a manner consistent with the requirements of applicable law or ordinance including the Fair Chance Ordinance of Los Angeles and San Francisco.

If you have visited our website for information about employment opportunities, or to apply for a position, and you require an accommodation, please contact Guidehouse Recruiting at 1-571-633-1711 or via email at RecruitingAccommodation@guidehouse.com. All information you provide will be kept confidential and will be used only to the extent required to provide needed reasonable accommodation.

Guidehouse does not accept unsolicited resumes through or from search firms or staffing agencies. All unsolicited resumes will be considered the property of Guidehouse and Guidehouse will not be obligated to pay a placement fee.

CACI's Business and Information Technology Solutions (BITS) Sector is seeking Program Control and Accounting Analysts in support of the Navy’s Enterprise Support Information Technology Command Information Office (ES IT/CIO) office located in Arlington Va. If you are a motivated individual looking to be a part of a critical mission, CACI would like to speak with you!

What You’ll Get to Do:

Responsible for all program level financial analysis and reporting.  Requirements may include program cost control and management using cost baselines, revenue and profit recognition and forecasting, customer reporting and invoicing support, direct and indirect rate analysis, annual and multi-year planning, monthly forecasting, program compliance with FAR and GAAP regulations, and program initial set up to include project codes with work breakdown structure and billing set up. Prepare budget related briefings, spreadsheets. Analyze historical, current, and future program financial needs to assess funding status, to determine impacts due to shortfalls. Verify accuracy of financial data contained in, or provided in response to, all Congressional budget documents.

More About the Role:

You will provide support services to assist the ES IT/CIO office with the respect to OPNAV N1 responsibilities as the Single Manpower Resource Sponsor and Navy-wide functional sponsor for IT and IM information resources. This support will include planning and programming support and management of compliance tasking and responses that are mandated by various departments within the Navy, the Office of Secretary of Defense and Congress.

You’ll Bring These Qualifications:

Requires a bachelor’s degree in management information systems or computer Science, and a minimum of 10 years of experience in any of the following: complex problem solving, software, systems, business processes, enterprise communications, information assurance or data standardization.

• Experience in financial management and accounting in a general government environment in areas to include POM, Cost Estimation, Planning, Programming, Budgeting, Execution and Federal financial and accounting policies and system requirements. System experience may include PBIS and PBIS-IT.
• Ability to work as a team member in a diverse group; ability to deal effectively with both Government and contracted workforce members.
• Requires active SECRET Clearance.

What We Can Offer You:

Our employees value the flexibility at CACI that allows them to balance quality work and their personal lives.

- We offer competitive benefits and learning and development opportunities.
- We are mission-oriented and ever vigilant in aligning our solutions with the nation’s highest priorities.
- For over 60 years, the principles of CACI’s unique, character-based culture have been the driving force behind our success.

Company Overview:

At CACI, you will have the opportunity to make an immediate impact by providing information solutions and services in support of national security missions and government transformation for Intelligence, Defense, and Federal Civilian customers. CACI is an Equal Opportunity Employer – Females/Minorities/Protected Veterans/Individuals with Disabilities

What We Can Offer You:

- We’ve been named a Best Place to Work by the Washington Post.

- Our employees value the flexibility at CACI that allows them to balance quality work and their personal lives.

- We offer competitive benefits and learning and development opportunities.

- We are mission-oriented and ever vigilant in aligning our solutions with the nation’s highest priorities.

- For over 60 years, the principles of CACI’s unique, character-based culture have been the driving force behind our success.

 

Company Overview:

CACI is an Equal Opportunity/Affirmative Action Employer.  All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or any other protected characteristic.

Pay Range: There are a host of factors that can influence final salary including, but not limited to, geographic location, Federal Government contract labor categories and contract wage rates, relevant prior work experience, specific skills and competencies, education, and certifications. Our employees value the flexibility at CACI that allows them to balance quality work and their personal lives. We offer competitive compensation, benefits and learning and development opportunities. Our broad and competitive mix of benefits options is designed to support and protect employees and their families. At CACI, you will receive comprehensive benefits such as; healthcare, wellness, financial, retirement, family support, continuing education, and time off benefits. Learn more here

The proposed salary range for this position is:

Job Title

Job Description Summary

Job Description

C&W Services is the industry leader in Integrated Maintenance Solutions providing service to more than 600 companies worldwide and is a sister company of Cushman & Wakefield.

C&W Services offers:

• Weekly Pay!
• Comprehensive Benefits that start on your first day!
• Advancement Opportunities!
• Training to work in a Cutting Edge Facility!
• A Safety First Culture!

About the Role:

As a Control Systems Lead, you will lead service technicians on the team with maintaining, troubleshooting, and modifying Material Handling (MHE) controls systems equipment to ensure operational performance. You will support the Operations Maintenance team by designing solutions for difficult problems and managing projects. You will help train, and mentor service technicians and contract technicians.

Responsibilities include, but are not limited to:

• Promote a safe working environment by following all safety procedures
• Troubleshoot and modify software programs for material handling control systems, including PLC/PC controllers, Allen Bradley Controllogix and Compactlogix PLC platform utilizing RSLogix 5000 software package. Including Industrial networks such as Ethernet, ControlNet, DeviceNet, Profibus, AS-I, motor control systems, servo drives, frequency drives, and electrical distribution systems.
• Act as first level escalation support for the control system technician teams. Appropriately escalate downtime situations to vendors or headquarters for support to restore equipment operation.
• Apply subject matter expertise in material handling and electronic control systems to maximize building utilization of systems
• Monitor MHE metrics and partner with Controls Technicians and Mechanics to resolve equipment electrical problems that create performance deficiencies. Perform controls systems assessments to maintain and improve equipment reliability
• Partner with Facility Operations leadership, equipment vendors and parts suppliers to plan and coordinate new technology installations. Acting as the technical consultant for capital projects inside the building
• Communicate technical issues and project timelines with building leadership, operations and the maintenance team.  Explain production impacts and work closely with operations and engineering to ensure a thorough understanding of impact to systems
• Develop training plans for Control Systems Technicians

Basic Qualifications:

• Associates degree with a focus in in Electronic Technology or equivalent experience 
• 5+ years of experience with Motor Controls (motor starts, variable frequency drives, DC drives, and standard electrical components) 
• 5+ years of experience with programming HMI components
• 5+ years of experience with Programmable Logic Controls (PLC) programs
• 5+ year of experience with Robotics system components and controls
• 3+ years with SCADA systems and KPI's
• Experiencing interpreting and modifying mechanical and electrical drawings

Preferred Qualifications:

• Bachelor’s degree in Electrical Engineering or related field
• 4+ years of experience in the Electrical fields, or in Control Systems development, troubleshooting and programming
• 4+ years of experience supporting advanced automation controls systems maintenance and development
• 3+ years of experience supporting a wide range of conveyors and sortation systems
• Leadership and project management experience
• Experience with ASRS systems and Computerized Maintenance Management Systems (CMMS)

PHYSICAL DEMANDS:
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.

• Ability to reach overhead, kneel, squat, climb steps/ladders and frequently lift a maximum of 50 lbs. of equipment
• Ability to perform tasks wearing appropriate or required PPE, which may include but is not limited to hard hat, face mask, face shield, and composite toe shoes.
• Regularly required to crouch or bend and reach to install and move equipment
• Ability to move between departments, floors, and properties to facilitate work, averaging 6 to 12 miles per day
• Must be able to work in an environment with fluctuating temperatures
• Regularly required to type on a computer for 1-2 hours per day

In compliance with the Americans with Disabilities Act Amendments Act (ADAAA), if you have a disability and would like to request an accommodation in order to apply for a position at Cushman & Wakefield, please call the ADA line at 1-888-365-5406 or email HRServices@cushwake.com. Please refer to the job title and job location when you contact us.