Job Title

Job Description Summary

Job Description

1. Complete assigned work orders on facility finishes, furnishings and equipment in a timely manner

2. Respond to emergency requests on an as needed basis

3. Maintains a professional, safe and clean work environment

4. Complies with all C&W Services and OSHA safety policies and regulations

5. Performs other duties as assigned by C&W Services Supervisor assisting other tradesmen, and emergency repairs

6. Tracking and reconciling all work orders along with parts used immediately via a PDA system

7. Maintain company van, inventory and tools

8. Coordinate restock of vehicle

9. Meeting daily goals

(Knowledge, Skills, Abilities, and Education and/or Experience):

1. Must hold a current state issued drivers license and record in good standing

2. Minimum 3- 5 years experience in commercial/retail facility maintenance

3. High school diploma or technical school certification. Ability to organize and schedule one’s own work assignments.

WORKING CONDITIONS and/or PHYSICAL REQUIREMENTS:

1. In addition to tolerating a variety of conditions, you need to be able to lift and carry up to 50 pounds and be able to push or pull 50 pounds daily.

2. Must be able to climb ladders and work at elevated heights and on roof tops.

#INDSkilledTrades

In compliance with the Americans with Disabilities Act Amendments Act (ADAAA), if you have a disability and would like to request an accommodation in order to apply for a position at Cushman & Wakefield, please call the ADA line at 1-888-365-5406 or email HRServices@cushwake.com. Please refer to the job title and job location when you contact us.

Job Title

Job Description Summary

Job Description

Grounds Maintenance Technician 

In compliance with the Americans with Disabilities Act Amendments Act (ADAAA), if you have a disability and would like to request an accommodation in order to apply for a position at Cushman & Wakefield, please call the ADA line at 1-888-365-5406 or email HRServices@cushwake.com. Please refer to the job title and job location when you contact us.

Job Title

Job Description Summary

Job Description

In compliance with the Americans with Disabilities Act Amendments Act (ADAAA), if you have a disability and would like to request an accommodation in order to apply for a position at Cushman & Wakefield, please call the ADA line at 1-888-365-5406 or email HRServices@cushwake.com. Please refer to the job title and job location when you contact us.

Job Title

Job Description Summary

Job Description

ESSENTIAL JOB DUTIES:

• Prepares all market-ready apartments, which may include painting, carpet cleaning/repair, general repairs, and housekeeping to ensure a quality product to our residents.
• Completes resident service request in a timely manner.
• Has knowledge of various maintenance functions including and not limited to plumbing, pool maintenance, air conditioning, heating, general carpentry skills, appliance, electrical, painting, caulking, snow removal, scheduling, and life safety issues.
• Maintains grounds, pools/ hot tubs, common areas, and dog parks to keep them clean, free of trash, debris, and other safety issues.
• Performs on-call emergency procedures as required.
• Reports any maintenance issues that affect the budget such as life safety, vacant repairs, property damages, and common area needs to the manager.
• Schedules and performs preventative maintenance and records such activities.
• Is knowledgeable of state, local, and federal housing laws, codes, policies, and systems regarding maintenance.
• Attends and participates in training programs as required by Cushman & Wakefield and local city and state jurisdictions.
• Provide superior customer service and represents the company in a professional manner at all times.

COMPETENCIES:

• Must be able to work any shift Sunday-Saturday to support the company's business needs.
• Knowledge of safe use of cleaning agents and equipment used to perform job duties
• Ability to add, subtract, multiply, and divide in all units of measure, whole numbers, common fractions, and decimals.
• Ability to compute rate, ratio, and percent and to prepare and interpret bar graphs.
• Must possess a valid Driver's License.
• CPO if required by city or state.
• EPA 608 - Minimum of Type II
• Follow all Cushman & Wakefield safety policies and procedures

IMPORTANT EDUCATION

• High School Diploma, GED, Trade, Technical, or Vocational school

IMPORTANT EXPERIENCE

• 3+ years of related experience
• EPA 608 – Minimum Type II, or CPO, or local city required certificate

WORK ENVIRONMENT

This job operates in a professional office environment. This role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines. Regularly required to travel outside between properties in varying weather conditions.

PHYSICAL DEMANDS

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee may need to travel from floor to floor, climb stairs, and may be required to travel outside between buildings in varying outdoor weather conditions. The employee may also be regularly required to remain in a stationary position (sit or stand) for 85% of the time; regularly use hands to operate office machinery and regularly required to walk, talk, and hear. The employee must be able to travel up to 10 % of the time. Travel may vary in frequency and duration. The employee must demonstrate the ability to exert up to 100 pounds occasionally, and/or up to 100 pounds frequently, and/or up to 100 pounds of force constantly to lift, carry, push, pull, or move objects.

OTHER DUTIES

This job description is not designed to cover or contain a comprehensive list of activities, duties or responsibilities that are required of the employee. Other duties, responsibilities and activities may change or be assigned at any time with or without notice.

In compliance with the Americans with Disabilities Act Amendments Act (ADAAA), if you have a disability and would like to request an accommodation in order to apply for a position at Cushman & Wakefield, please call the ADA line at 1-888-365-5406 or email HRServices@cushwake.com. Please refer to the job title and job location when you contact us.

Job Title

Job Description Summary

Job Description

ESSENTIAL JOB DUTIES:

• Cleans the property business office, restrooms, laundry rooms, model apartments and property common areas on a defined schedule
• Cleans vacant apartment units in preparation for showing and occupancy
• Responsible for the overall upkeep of the property landscape and the exterior image which includes cleaning of the driveways, parking lots, curbs, dumpster areas, exterior hallways, or any other public areas.
• Responsible for providing world class customer service by addressing the concerns and maintenance needs of our residents in a friendly and professional manner
• Reports any maintenance problems to the supervisor
• Assists with inventory control
• Performs job duties using safety guidelines and reports obstacles to be doing so
• Performs other duties as assigned

COMPETENCIES:

• Knowledge of safe use of cleaning agents and equipment used to perform job duties
• Experience cleaning multifamily residential or commercial buildings preferred
• Able to follow directions and handle projects
• Able to complete tasks on time
• Able to follow all Cushman & Wakefield safety policies and procedures

IMPORTANT EDUCATION

• High School Diploma, GED, Trade, Technical, or Vocational school

IMPORTANT EXPERIENCE

• Some related experience

WORK ENVIRONMENT

This job operates in a professional office environment. This role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines. Regularly required to travel outside between properties in varying weather conditions.

PHYSICAL DEMANDS

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee may need to travel from floor to floor, climb stairs, and may be required to travel outside between buildings in varying outdoor weather conditions. The employee may also be regularly required to remain in a stationary position (sit or stand) for 85% of the time; regularly use hands to operate office machinery and regularly required to walk, talk, and hear. The employee must demonstrate the ability to exert up to 25 pounds occasionally, and/or up to 25 pounds frequently, and/or up to 25 pounds of force constantly to lift, carry, push, pull, or move objects.

OTHER DUTIES

This job description is not designed to cover or contain a comprehensive list of activities, duties or responsibilities that are required of the employee. Other duties, responsibilities and activities may change or be assigned at any time with or without notice.

In compliance with the Americans with Disabilities Act Amendments Act (ADAAA), if you have a disability and would like to request an accommodation in order to apply for a position at Cushman & Wakefield, please call the ADA line at 1-888-365-5406 or email HRServices@cushwake.com. Please refer to the job title and job location when you contact us.

Job Title

Job Description Summary

Job Description

In compliance with the Americans with Disabilities Act Amendments Act (ADAAA), if you have a disability and would like to request an accommodation in order to apply for a position at Cushman & Wakefield, please call the ADA line at 1-888-365-5406 or email HRServices@cushwake.com. Please refer to the job title and job location when you contact us.

Job Description Summary

Job Description

We are the makers of possible 

BD is one of the largest global medical technology companies in the world. Advancing the world of health™ is our Purpose, and it’s no small feat. It takes the imagination and passion of all of us—from design and engineering to the manufacturing and marketing of our billions of MedTech products per year—to look at the impossible and find transformative solutions that turn dreams into possibilities. 

We believe that the human element, across our global teams, is what allows us to continually evolve. Join us and discover an environment in which you’ll be supported to learn, grow and become your best self. Become a maker of possible with us. 

Responsibilities

Main activities and accountabilities include but are not limited to:

1. Develop / Maintain a comprehensive equipment work and cost history database.

2. Ensure highly planned utilization of technicians and on-time work completion utilizing lowest possible completion cost with minimum disruption to equipment operation.

3. 100% PMs scheduled and completed on time.

4. 100% compliance with all regulatory requirements.

5. Support the development of optimized preventive maintenance plan, delivering key objectives, goals, and strategies for work planning, including safety, regulatory and budget requirements compliance

6. Ensure that all maintenance plans (internal or by contractors) are compliant in terms of safety, regulatory and operational aligned with BD requirements, ensure liaison with material management and reliability

7. Validate the time, materials, resources and tools required to complete each job (PM/CM/Other activities) for the different sections.

8. Manage all planned and scheduled maintenance activities and ensure elimination of de-lays due to waiting for information, materials, equipment, other skills and tools.

9. Manage priorities and control maintenance status realization and propose actions for backlog reduction without risk for Operations.

10. Monitor and control recorded hours, ratio between preventive and corrective maintenance, planning index, schedule alignment and backlog trends and maintenance costs to identify priorities, trigger revision of frequency, duration and or resources in the maintenance plans and potential improvement projects.

11. Ensure up to date key process indicators and actions as well as relevant information to all stakeholders.

12. Ensure that management is practiced, that effective performance review structures are in place and that measurement and review drives continuous improvement projects of the systems of their responsibility.

13. Coordinate the work order generation based on maintenance plan and notifications/service requests, with Production planning to increase the planned work.

14. Ensure that all work meets all the required technical and EH&S specifications.

15. Other duties as required to support the needs of the business.

Minimum Requirement:

• High school diploma/GED required, AA/BS preferred

• Minimum 2 years equipment and automation experience required

• Medical device experience preferred

• Maintenance software experience preferred

For certain roles at BD, employment is contingent upon the Company’s receipt of sufficient proof that you are fully vaccinated against COVID-19. In some locations, testing for COVID-19 may be available and/or required. Consistent with BD’s Workplace Accommodations Policy, requests for accommodation will be considered pursuant to applicable law.

Why Join Us?

A career at BD means being part of a team that values your opinions and contributions and that encourages you to bring your authentic self to work. It’s also a place where we help each other be great, we do what’s right, we hold each other accountable, and learn and improve every day.  

To find purpose in the possibilities, we need people who can see the bigger picture, who understand the human story that underpins everything we do. We welcome people with the imagination and drive to help us reinvent the future of health. At BD, you’ll discover a culture in which you can learn, grow, and thrive. And find satisfaction in doing your part to make the world a better place.  

To learn more about BD visit https://bd.com/careers 

Becton, Dickinson and Company is an Equal Opportunity/Affirmative Action Employer. We do not unlawfully discriminate on the basis of race, color, religion, age, sex, creed, national origin, ancestry, citizenship status, marital or domestic or civil union status, familial status, affectional or sexual orientation, gender identity or expression, genetics, disability, military eligibility or veteran status, or any other protected status. 

PDN

Primary Work Location

Additional Locations

Work Shift

In this role, you will report to the supervisor of site services and will work closely with the Avantor’s Lab and Production Services professionals to serve our customers by performing customized, mission-based lab work and research protocols that help return time back to science.

Disclaimer:

The above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties and skills required of employees assigned to this position. Avantor is proud to be an equal opportunity employer.

Dare to go further in your career. Join our global team of 14,000+ associates whose passion for discovery and determination to overcome challenges relentlessly advances life-changing science.
 
The work we do changes people's lives for the better. It brings new patient treatments and therapies to market, giving a cancer survivor the chance to walk his daughter down the aisle. It enables medical devices that help a little boy hear his mom's voice for the first time. Outcomes such as these create unlimited opportunities for you to contribute your talents, learn new skills and grow your career at Avantor.
 
We are committed to helping you on this journey through our diverse, equitable and inclusive culture which includes learning experiences to support your career growth and success. At Avantor, dare to go further and see how the impact of your contributions set science in motion to create a better world. Apply today!

EEO Statement:

We are an Equal Employment/Affirmative Action employer and VEVRAA Federal Contractor. We do not discriminate in hiring on the basis of sex, gender identity, sexual orientation, race, color, religious creed, national origin, physical or mental disability, protected Veteran status, or any other characteristic protected by federal, state/province, or local law.

If you need a reasonable accommodation for any part of the employment process, please contact us by email at recruiting@avantorsciences.com and let us know the nature of your request and your contact information. Requests for accommodation will be considered on a case-by-case basis. Please note that only inquiries concerning a request for reasonable accommodation will be responded to from this email address.

For more information about equal employment opportunity protections, please view the Equal Employment Opportunity is THE LAW Poster, EEO is the Law Poster Supplement, and Pay Transparency Non-Discrimination Provision.

3rd Party Non-Solicitation Policy:

By submitting candidates without having been formally assigned on and contracted for a specific job requisition by Avantor, or by failing to comply with the Avantor recruitment process, you forfeit any fee on the submitted candidates, regardless of your usual terms and conditions. Avantor works with a preferred supplier list and will take the initiative to engage with recruitment agencies based on its needs and will not be accepting any form of solicitation.

About Us:

How many companies can say they’ve been in business for over 177 years?!

Here at ZEISS, we certainly can! As one of the pioneers of science, ZEISS handles the everchanging environment of our fast-paced world, meeting it with cutting edge technologies and continuous advancements. ZEISS believes that innovation and technology are the key to a sustainable future and solutions for global change. We have a diverse range of portfolios throughout the ZEISS family in segments like, Industrial Quality & Research, Medical Technology, Consumer Markets and Semiconductor Manufacturing Technology. We are a global company with over 42,000 employees and with over 4,000 in the US and Canada alone! Make a difference, come join the team!

What’s the role?

As a Field Service Technician, you get to work with an astonishing team that plays a vital role in Carl Zeiss Industrial Quality Solutions, LLC. Show case your skills and experience by process enhancements focused on installation and servicing of custom equipment. You will interact with customers and cross functional service groups that support and launch ZEISS products into the field. Additionally, you will aid the R&D team with engineering work in relation to design, build, and new system testing. This position will also support the production of systems during various stages of assembly and setup.

Sound Interesting?

Here’s what you’ll do:

• Install, Repair, Troubleshoot, Service and Calibrate high tech machines at customer locations.
• Demonstrate customer service skills and knowledge with a high level of passion and dedication.
• Demonstrate your ability to learn new skills on high tech CMM’s (Coordinate Measuring Machines) utilizing mechanical and electronic aptitude.
• Perform necessary administrative paperwork in a complete and accurate manner.
• Be Solutions-oriented with the ability to work independently in a high pressure, fast-paced and innovative environment.
• Travel requirement is 90-100% within the service area, including international travel as needed.
• Other duties as required.

Job Requirements

Do you qualify?

• Minimum, High School graduate, completed GED or equivalent.
• Or, Tech School, associate, or bachelor’s degree in a technical discipline such as, Electronics, Industrial Mechanics, and the like.
• Or, Training and experience from a Military Technical School.
• Prior experience working with hand tools and basic electrical test equipment.
• Microsoft operating system knowledge is required.
• Capable of unassisted physical lift of one article weighing up to 75 pounds.
• Able and willing to work minimum of 50 hours per work week. Regular + OT.
• Ability to work in an industrial production shop floor environment.
• Valid Driver License required.
• Excellent communication and customer service aptitude.​

Nice to haves:

• Previous experience installing and troubleshooting industrial electronics, machines, or computer systems.
• Previous CMM (Coordinate Measuring Machine) installation and troubleshooting experience is preferred however not required.

ZEISS is an EEO/AA/M/F/Disabled Veteran Employer

Your ZEISS Recruiting Team:

Zeiss provides Equal Employment Opportunity without unlawful regard to an Applicants race, color, religion, creed, sex, gender, marital status, age, national origin or ancestry, physical or mental disability, medical condition, military or veteran status, citizen status, sexual orientation, pregnancy (includes childbirth, breastfeeding or related medical condition), genetic predisposition, carrier status, gender expression or identity, including transgender identity, or any other class or characteristic protected by federal, state, or local law of the employee (or the people with whom the employee associates, including relatives and friends). 

Job Title

Job Description Summary

Job Description

C&W Services is the industry leader in Integrated Maintenance Solutions providing service to more than 600 companies worldwide and a sister company of Cushman & Wakefield.

We are looking for an experienced Assistant Maintenance Manager to lead team members in repairs and preventive / predictive maintenance on electrical and mechanical equipment primarily consisting of conveying and sorting equipment at our locations in the fast growing and dynamic logistics and fulfillment industry!

Expertise with Conveyor Systems strongly preferred. 

Duties include:

• Relies on experience and judgment to assign job plans and accomplish departmental goals. Manage all C&W Services maintenance team members at the site.
• Promote C&W Services both internally and externally. Must demonstrate leadership and good judgment in approaching decisions.
• Assist in formulating standards/work procedures while performing those duties and provide work order feedback on discrepancies noted in service delivery.
• Maintain positive customer and employee relations.
• Ensures that Maintenance department objectives and key metrics are met.
• Act as a Liaison to Account Manager, Planners, Customers, and Department.
• Lead team members by allocating time for one on one coaching and provide mentoring with high standards.
• Ensures compliance with all company / customer regulations, policies, and procedures.
• Oversee all applicable codes, standards, and specifications.
• Develop and oversee QA/QC inspection protocol of all work personnel and work performed.
• Achieve performance expectations set forth as part of performance appraisals.
• Communicates with all team members to support the development of short and long-range goals and objectives.

Requirements include:

• Bachelor’s Degree in Industrial Maintenance, Engineering, Management or related field (preferred) or transferrable management experience (3 years minimum; 5 years preferred).
• Have or possess capability to obtain CMRP / ICML MLT 1
• Has working knowledge of repairs and preventive / predictive maintenance on electrical and mechanical equipment. Repairs and preventive / predictive maintenance to be performed in conformance with established standards.
• Must have working knowledge of the following: proper use of basic/power tools, shop math, pneumatics, power transmissions, parts nomenclature, measurements and fasteners.
• Must be able to operate and have knowledge of simple and complex heavy industrial equipment such as forklifts, scissors lifts and boom lifts.
• Must have the flexibility to work all shifts including holidays and weekends as demanded by the job.

#CWSAMZ

In compliance with the Americans with Disabilities Act Amendments Act (ADAAA), if you have a disability and would like to request an accommodation in order to apply for a position at Cushman & Wakefield, please call the ADA line at 1-888-365-5406 or email HRServices@cushwake.com. Please refer to the job title and job location when you contact us.

Job Title

Job Description Summary

Job Description

ESSENTIAL FUNCTIONS AND RESPONSIBILITIES
• Perform all plumbing, electrical, or HVAC requirements of the building(s)
• Maintain heating equipment, chillers (air and/ or water cooled), DX units, pumps, cooling towers, fan coil units, VAV, and air distribution systems, etc.
• Monitor and adjust all mechanical/pneumatic equipment, steam stations, control gauges, distributor panels, valves, thermostats, diffusers, and other equipment necessary to provide a comfortable environment for the buildings
• Verify field conditions and perform any necessary repairs or adjustments
• Monitor Energy Management
• Repair doors, ceilings, hand railings, and floors and other general repairs, adjustments and installations about the property
• Perform repairs to plumbing fixtures (water closets, urinals, flush valve assemblies, lavatories, etc.)
• Perform preventive maintenance duties in accordance with C&W standards, building protocol, manufacturer recommendations and industry best practices. including changing filters, cleaning coils, flushing condensers, punching tubes, greasing fan, pump and motor bearings as required, inspecting and adjusting belts, replacing motor bearings, aligning pulleys and shafts, monitor condenser, chilled, heating and secondary water chemical treatment and its associated feed equipment, clean and maintain cooling towers, and perform annual inspections and other scheduled routines as directed.
• Inspect engine room equipment, fan room equipment, cooling tower, all motors, house pumps, electric rooms, back-up generator, fire pump(s), sump pump(s), and ejector pumps. Replace lamps, light fixtures, reinstall or replace signage, verify rooms are clean and clear of obstructions and debris
• Check for properly operating emergency exit signs and lights and ensure free and clear access to emergency stairs and exits. Perform additional fire and life safety inspections as per NFPA and local jurisdiction, C&W standards, building protocol and as directed by superiors and property management
• Document and report activities to supervisor
• Respond immediately to emergency situations (fire, evacuation, equipment failure, etc.) and customer concerns
• Comply with all applicable codes, regulations, governmental agency, and company directives as relates to building operations and practice safe work habits
• Complete all required C&W Safety Training as scheduled annually
• Comply with C&W Uniform Dress Code while working and maintain a neat and clean appearance while on the property at times other than working hours

KEY COMPETENCIES
• Technical Proficiency
• Initiative
• Flexibility
• Multi-Tasking
• Sense of Urgency
 

IMPORTANT EDUCATION
• High School Diploma of GED Equivalent
• Graduate of apprentice program or trade school preferred

IMPORTANT EXPERIENCE
• 3 - 5+ years of related work experience in operating mechanical, electrical, and plumbing systems in a commercial property setting

ADDITIONAL ELIGIBILITY QUALIFICATIONS
• Appropriate license/permit for trade as may be required, i.e. Journeyman or Master Electrician License or City Licenses, such as Refrigeration Certificate of Fitness, High Pressure Boiler License, High Pressure Steam Operator, etc.)
• Must have valid and current Universal EPA refrigerant handling license
• Possess and maintain a valid driver’s license and good driving record with periodic checks (where applicable)
• Basic Computing Skills in Outlook, Excel & Word
• Experience in operation, maintenance and basic repair of HVAC, boilers, heaters, pumps, refrigerant systems, compressors, water systems, etc.
• Knowledgeable in energy management systems, techniques and operations.
• Thorough knowledge in all building systems operations, maintenance and repair.

May be only maintenance staff member on duty during certain shifts; may be required to work extended periods of time without relief when responding to priority/emergency situations (including overtime type assignments); may require shift work and/or on call duties

WORK ENVIRONMENT
This job operates in a professional office environment. This role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines. Regularly required to travel outside between properties in varying weather conditions.

PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
• Must have ability to stoop, stand, climb, frequently lift a minimum of 50 lbs. of equipment (pumps, tools, ladders) and safely install rigging/lifting devices
• Regularly required to crouch and reach to install/move equipment by bending forward at the waist or by bending legs and spine
• Involves movement between departments, floors, and properties to facilitate work
• Ability to speak clearly so others can understand you
• Ability to read and understand information presented orally and in writing
• Regularly required to utilize vision abilities, allowing reading of printed material, drawings, and schematics

AAP/EEO STATEMENT
C&W provides equal employment opportunity to all individuals regardless of their race, color, creed, religion, gender, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by state, federal, or local law. Further, the company takes affirmative action to ensure that applicants are employed and employees during employment are treated without regard to any of these characteristics. Discrimination of any type will not be tolerated.
 

OTHER DUTIES
This job description is not designed to cover or contain a comprehensive list of activities, duties or responsibilities that are required of the employee. Other duties, responsibilities and activities may change or be assigned at any time with or without notice.

In compliance with the Americans with Disabilities Act Amendments Act (ADAAA), if you have a disability and would like to request an accommodation in order to apply for a position at Cushman & Wakefield, please call the ADA line at 1-888-365-5406 or email HRServices@cushwake.com. Please refer to the job title and job location when you contact us.

Why Patients Need You

Whether you are involved in the design and development of manufacturing processes for products or supporting maintenance and reliability, engineering is vital to making sure customers and patients have the medicines they need, when they need them. Working with our innovative engineering team, you'll help bring medicines to the world even faster by imagining what’s possible and taking action.

What You Will Achieve

Working with Pfizer’s dynamic engineering team, you will play a critical part in managing the maintenance and reliability engineering activities involving the redesign, maintenance, and repair of utilities systems, buildings, and production/non-production equipment.

You will be a team member who is relied to have a good understanding of procedures, techniques, tools, materials and equipment. Your decision making will help you prioritize workflows based on the available resources. You will follow standard procedures to complete tasks, some of which may vary in scope, sequence, complexity and timing. You will contribute to the team’s success by sharing your previously acquired knowledge.

It is your hard work and focus that will make Pfizer ready to achieve new milestones and help patients across the globe.

How You Will Achieve It

• Participate in multi-craft work activities as required.

• Assist with plant audits and be involved in safety committee to conduct safety inspection and audits.

• Track repair history of process support systems and equipment.

• Lead or participate in continuous improvement activities.

• Read and follow equipment schematics, logic diagrams and engineering drawings.

• Conduct rounds in Good Manufacturing Practices (also see cGMP) and non-GMP buildings, troubleshoot GMP equipment and systems.

• Train peers and mechanics on equipment supported by the Instrument Shop.

• Ensure all maintenance activity is completed within designated timeframe filing proper documentation per Standard Operating Procedures as necessary for extensions.

• Follow all Environmental, Health, and Safety requirements and protocols.

• Make recommendations regarding improved machine performance.

• Read and interpret detailed blueprints and schematics.

• Manage own time and professional development, accountable for own results and prioritize own workflow.

Qualifications

Must-Have

• High School Diploma or GED

• 2+ years of experience

• Excellent computer user skills

• Functional or Technical Knowledge of basic discipline

• Good verbal and written communication skills

• Sound interpersonal, decision making and problem solving skills

Nice-to-Have

• Previous Biopharma experience

• Knowledge of Food and Drug Administration PSM, Good Manufacturing Practices {also cGMP} policies and procedures

  
Work Location Assignment: On Premise

OTHER JOB DETAILS

Last Date to Apply for Job: April 12, 2024

Eligible for Relocation Package: YES.

#LI-PFE

Relocation assistance may be available based on business needs and/or eligibility.

It's fun to work at a company where people truly believe in what they are doing!

Job Description:

A Service Specialist – Facilities provides various administrative support services to our clients which may include office moves, conference room setups, and miscellaneous facilities-related tasks.

Essential Job Responsibilities

• Performs office related duties including office moves, replicating appearance in new location; set up of new offices with supplies, ensuring all equipment is functional, and office is presentable; departures, removal of all files delivering them to appropriate personnel, packaging of personal items, and ensuring office is presentable for next occupant

• Sets up conference rooms, meeting special client requirements, including correct table set up, tables are clean, lighting / shading is functional, and room is presentable

• Performs facilities related duties including picture hanging, small furniture set up, infrequent assembly of small furniture and other special needs as required

Qualifications & Requirements

• High School Diploma or GED

• 1+ work experience in a customer services field

• Ability to multitask with attention to detail

• Strong organizational and problem-solving skills

• Strong customer service and interpersonal skills

• Ability to lift or move 40 lbs. or greater

• Ability to grasp, lift or carry items on a standard wheeled cart with a load capacity of 75 lbs

• Ability to walk, bend, kneel, stand or sit for an extended period of time

The Compensation range for this role is 16.75 to 25.13 USD per hour and may be eligible for an annual bonus. Actual compensation within that range will be dependent upon the individual's location, skills, experience and qualifications.

Click here to learn about Epiq's Benefits.

If you like wild growth and working with happy, enthusiastic over-achievers, you'll enjoy your career with us!

It is Epiq’s policy to comply with all applicable equal employment opportunity laws by making all employment decisions without unlawful regard or consideration of any individual’s race, religion, ethnicity, color, sex, sexual orientation, gender identity or expressions, transgender status, sexual and other reproductive health decisions, marital status, age, national origin, genetic information, ancestry, citizenship, physical or mental disability, veteran or family status or any other basis protected by applicable national, federal, state, provincial or local law. Epiq’s policy prohibits unlawful discrimination based on any of these impermissible bases, as well as any bases or grounds protected by applicable law in each jurisdiction. In addition Epiq will take affirmative action for minorities, women, covered veterans and individuals with disabilities. If you need assistance or an accommodation during the application process because of a disability, it is available upon request. Epiq is pleased to provide such assistance and no applicant will be penalized as a result of such a request.  Pursuant to relevant law, where applicable, Epiq will consider for employment qualified applicants with arrest and conviction records.

At Dow, we believe in putting people first and we’re passionate about delivering integrity, respect and safety to our customers, our employees and the planet.  

Our people are at the heart of our solutions. They reflect the communities we live in and the world where we do business. Their diversity is our strength. We’re a community of relentless problem solvers that offers the daily opportunity to contribute with your perspective, transform industries and shape the future. Our purpose is simple - to deliver a sustainable future for the world through science and collaboration. If you’re looking for a challenge and meaningful role, you’re in the right place. 

About You and this Role

Provides I/E specific support for project commissioning and start-up for Poly 7 in Freeport, TX. Maintains and repairs all types of equipment within craft knowledge and expertise. Requires broadened technical skills in analytical/scientific methods or operational processes to perform a defined array of activities. May act as an informal resource for team members with less experience.

Responsibilities

• Drive commissioning and start-up activities.
• Guide third party contractors on work scopes and help meet start up deadlines.
• Provide loop checking support on start-up.
• Help review and build procedures for a new plant.
• Help review spare part inventory for I/E equipment.
• Review equipment records database and verify field component.
• Review SAP records for consistency.
• Diagnoses and corrects equipment problems.
• Calibrates and aligns equipment.
• Completes preventative maintenance activities.
• Checks sizing of components and parts.
• Specifies, requisitions, and installs parts and equipment.
• Coordinates maintenance spare parts.
• Assists in planning, prioritizing, and scheduling maintenance through planner, work coordinator and operations input.
• Sets up and calibrates, tests, measures and repairs all types of controls and instruments with pneumatic, electrical, and electronic variables.
• Repairs, maintains and installs equipment and machinery which is used in the process.
• Troubleshoots and repairs malfunctions and documents failure analysis.
• Collects equipment operation and history data to facilitate reliability improvements.
• Works within established Maintenance Work Processes and helps resolve issues that surface as a result of planning and scheduling work.

Qualifications

• A minimum of a HS Diploma/GED Equivalent.
• A minimum of 3 years of relevant experience.
• Must have a current, valid US Drivers License.
•  A minimum requirement for this U.S. based position is the ability to work legally in the United States.  No visa sponsorship/support is available for this position, including for any type of U.S. permanent residency (green card) process.

Additional Notes

• No relocation assistance is available for this position.

Physical Requirements

Must be willing and able to do the following with or without a reasonable accommodation.

• Wear safety equipment, such as earplugs, goggles, and steel-toed shoes with or without an accommodation.
• Climb stairs/ladders and work high off the ground.
• Lift a minimum of 30 lbs.
• Ability to work comfortably and safely at elevated heights. Candidates must be familiar with, or willing to undergo training in, the proper usage and maintenance of safety equipment to ensure safe movement and operations at heights.

Benefits – What Dow offers you 

We invest in you. 

Dow invests in total rewards programs to help you manage all aspects of you: your pay, your health, your life, your future, and your career.  You bring your background, talent and perspective to work every day. Dow rewards that commitment by investing in your total wellbeing.  

Here are just a few highlights of what you would be offered as a Dow employee: 

• Equitable and market-competitive base pay and bonus opportunity across our global markets, along with locally relevant incentives. 
• Benefits and programs to support your physical, mental and emotional well-being, to help you get the care you need...when you need it. 
• Competitive retirement program that may include company-provided benefits, savings opportunities, financial planning and educational resources to help you achieve your long term financial-goals. 
• Become a Dow shareholder through various employee stock programs.
• Opportunities to learn and grow through training and mentoring, work experiences, community involvement and team building. 
• Workplace culture empowering role-based flexibility to maximize personal productivity and balance personal needs. 
• Global Paid Time Off (PTO) policies:
  • Paid time off for new parents (birthing and non-birthing, including adoptive and foster parents).  
  • ​Paid time off to care for family members who are sick or injured.  
  • Paid time off to support volunteering and Employee Resource Group’s (ERG) participation. 

Join our team, we can make a difference together. 

About Dow

Dow (NYSE: DOW) is one of the world’s leading materials science companies, serving customers in high-growth markets such as packaging, infrastructure, mobility and consumer applications. Our global breadth, asset integration and scale, focused innovation, leading business positions and commitment to sustainability enable us to achieve profitable growth and help deliver a sustainable future. We operate manufacturing sites in 31 countries and employ approximately 35,900 people. Dow delivered sales of approximately $45 billion in 2023. References to Dow or the Company mean Dow Inc. and its subsidiaries. ​​​​Learn more about us and our ambition to be the most innovative, customer-centric, inclusive and sustainable materials science company in the world by visiting www.dow.com.

As part of our dedication to the diversity of our workforce, Dow is committed to equal opportunities in employment.  We encourage every employee to bring their whole self to work each day to not only deliver more value, but also have a more fulfilling career. Further information regarding Dow's equal opportunities is available on www.dow.com.

At Dow, we believe in putting people first and we’re passionate about delivering integrity, respect and safety to our customers, our employees and the planet.  

Our people are at the heart of our solutions. They reflect the communities we live in and the world where we do business. Their diversity is our strength. We’re a community of relentless problem solvers that offers the daily opportunity to contribute with your perspective, transform industries and shape the future. Our purpose is simple - to deliver a sustainable future for the world through science and collaboration. If you’re looking for a challenge and meaningful role, you’re in the right place. 

About you and this role:

Do you prefer a manufacturing role where you are able to work as an independent contributor on an empowered team? In this role, you will work in an integrated process operating environment where every day is unique.  You will also be able to work in a team environment and be responsible for safely producing and ensuring high operational reliability to achieve plant and business goals. In this position you will operate assigned equipment and areas of the plant and perform operations-related activities following the plant work processes. You will utilize your chemical manufacturing knowledge and experience to run and troubleshoot the plant in a safe, reliable and efficient manner, working in a team environment where individuals often set priorities, and complete work activities with minimal supervision.

Responsibilities:

• Shadowing/supporting Operating Technicians
• Following Operating Discipline principles, procedures and practices to help ensure safe and efficient operation of assigned plant areas.
• Making rounds with an operator and assisting in taking readings and field-checking process equipment.
• Monitoring process conditions, equipment and control systems.
• Performing tasks under the direct supervision/direction of an experienced operator.
• Participating in troubleshooting unit upsets and abnormalities.
• Witnessing the work permit system, learn about Environmental, Health & Safety systems as well as emergency preparedness.
• Demonstrating Dow's global competencies showing: cooperative and active participation in operations activities, willingness and enthusiasm to learn about the facility, ability to apply self to effectively help and support operations.
• Working in a team environment where individuals often set priorities and complete work activities with little or no direction from a manager/supervisor, the PTEC Intern is responsible for:
• Being self-motivated with high standards of personal integrity.
• Having a strong work ethic and being able to remain productive in an empowered team environment.
• Having good technical skills to learn how to operate both manual and highly automated equipment.
• Having the desire to learn and grow technical skills to stay current with new automation and technology.
• Being able to effectively work with others. Candidates must be able and are expected to effectively communicate, share information, in a respectful and professional manner.
• Being able to demonstrate leadership behaviors - setting high standards of personal excellence and demonstrating these behaviors in work habits including safe work behaviors, work ethic, etc.

Qualifications:

High School Diploma or GED AND 1 of the following is required:

• Enrolled in your last semester of a Process Technology (PTEC) Associates degree program and have at least a 2.7 cumulative GPA OR graduated in the last 2 years
• 4 or more years of relevant military experience.

Also Required:

• A minimum requirement for this U.S. based position is the ability to work legally in the United States. No visa sponsorship/support is available for this position, including for any type of U.S. permanent residency (green card) process

Preferred Skills:

• Being self-motivated with high standards of personal integrity.
• Having a strong work ethic and being able to remain productive in an empowered team environment.
• Having good technical skills to learn how to operate both manual and highly automated equipment.
• Having the desire to learn and grow technical skills to stay current with new automation and technology.
• Being able to effectively work with others. Candidates must be able and are expected to effectively communicate, share information, in a respectful and professional manner.
• Being able to work with others in an empowered team environment.
• Being able to demonstrate leadership behaviors - setting high standards of personal excellence and demonstrating these behaviors in work habits including safe work behaviors, work ethic, etc.
• Punctual and reliable.
• Proficiency in Microsoft applications, such as Word and Excel, and have the ability to learn new systems quickly.
• Strong multi-tasking, problem solving and time management skills.

Physical Requirements:

Able to meet the following physical demands of the job, with or without reasonable accommodations:

• Lift, push, and pull up to 55 lbs.
• Frequent bending, reaching, and lifting
• Stand 50% of the time.
• Walk for extended periods of time
• Work at heights, climb stairs and ladders.
• Work in tight and closed in spaces.
• Wear all required personal protective equipment, including but not limited to respirator.
• Work in an area of intense or continuous noise.
• Work in an area with hazardous materials

Additional Notes:

• Essential functions of this position may require, among other things, that the employee use particular types of equipment -- such as on-site safety equipment that has specific weight limitations whereby the individual’s own weight, plus the weight of tools and other items and materials, must not exceed a certain threshold. (For example, some types of safety equipment may be rated for a maximum weight limit of 300 pounds total.)  In the event a job offer for this position were (conditionally) extended, the individual will be appropriately evaluated in regard to their ability to perform all essential job functions with or without reasonable accommodation.
• We do not offer relocation assistance for Dow jobs like this position. This includes reimbursement for travel expenses incurred to and from test sessions/interviews. If you apply for a position that is not within the area in which you reside, you will be responsible for all costs that you incur.

About Dow

Dow (NYSE: DOW) is one of the world’s leading materials science companies, serving customers in high-growth markets such as packaging, infrastructure, mobility and consumer applications. Our global breadth, asset integration and scale, focused innovation, leading business positions and commitment to sustainability enable us to achieve profitable growth and help deliver a sustainable future. We operate manufacturing sites in 31 countries and employ approximately 35,900 people. Dow delivered sales of approximately $45 billion in 2023. References to Dow or the Company mean Dow Inc. and its subsidiaries. ​​​​Learn more about us and our ambition to be the most innovative, customer-centric, inclusive and sustainable materials science company in the world by visiting www.dow.com.

As part of our dedication to the diversity of our workforce, Dow is committed to equal opportunities in employment.  We encourage every employee to bring their whole self to work each day to not only deliver more value, but also have a more fulfilling career. Further information regarding Dow's equal opportunities is available on www.dow.com.