Total 138 maintenance repair job vacancies in Maintenance / Repair category in US MSA Massena, New York

Major Duties

• Performs a variety of tasks involved with installing, modifying, troubleshooting and repairing new and existing systems, including, but not limited to: condensers, chillers, air handlers, compressed air, humidifying, dehumidifying, filtering, refrigerators, freezers and computer based Energy Management Control Systems (EMCS).
• Maintains, repairs and installs new and existing plumbing systems, to include, but not limited to: high/ low pressure piping, sanitary sewer, steam heat, steam generation, circulating, vacuum, and condensate pumps, expansion tanks, radiators, lavatories, commodes, and water heaters.
• Works from building plans, blueprints and sketches to plan and layout routing of piping, vents, wiring, refrigeration lines, ductwork and valves.

• Reads and interprets blueprints and wiring diagrams relative to the assigned equipment and utility systems. He/she must be able to read and understand technical manuals and instructions on air conditioning and refrigeration equipment, as well as pumps, valves, gas and oil fired boilers and furnaces.
• Estimates cost, both labor and material, and prepare lists of materials for the completion on any job to be done
• Uses hand and power tools, to include, but not limited to: multi-meters, diagnostic equipment, air velocity meters, flue gas analyzer, grinders, pipe threading machine, pipe cutter, Oxy-Acetylene torch, refrigeration gauges, and motorized drain cleaner.
• Troubleshoots, calibrates, balances and operates central heating, ventilation, air conditioning, and steam systems and their associated equipment and controls within the facility.
• At a minimum, possesses a Universal Technician certification in accordance with 40 CFR part 82, subpart F, as well as a Gas Fitters License.
• Creates leak-free joints in piping and tubing systems by using the appropriate method, to include, but not limited to: solder, silver solder, Teflon sealant, and compression fittings.
• Possesses the knowledge of electrical wiring and related components of pumps, air handlers, chillers, water heaters, exhaust fans, electronic valves, etc. and be able to troubleshoot, repair and/or install such items.

• Confers with the Maintenance Scheduler and/or the M&R Operations Supervisor regarding his findings relative to maintenance and repairs to utility systems and equipment and helps plan and coordinate the repair of any issues.
• Knows codes and regulations pertaining to the practice of HVAC, refrigeration, plumbing and steam. Plumbing includes but is not limited to domestic water, heating/cooling piping, natural gas/propane, compressed air, sanitary drain piping.
• Plans his/her work in compliance with the prescribed standards of quality and quantity in accordance with established policy, codes, and regulations.
• Performs maintenance of all air conditioning and refrigeration equipment, including changing oil, replacing gaskets, replacing defective lines and/or valves including expansion valves, back pressure valves, water control valves, pressure regulators, compressors, receivers, condensers, evaporators, and automatic controls.
• Performs maintenance, repair, and installation on, but not limited to the following dietetic equipment: reach-in and walk-in refrigerators/freezers and all related components, ice making machines, hot-cold food carts, and lowerators.
• Maintains, repairs and modifies compressed air systems (excluding Medical Air) throughout the facility to ensure proper operation, pressure and filtration.
• Performs maintenance and repair, extensions and alterations to all piping, fixtures, appliances and appurtenances in connection with any of the following: sanitary drainage or storm drainage facilities; the venting systems; the water supply system; gas distribution within or adjacent to buildings, structures or conveyance and throughout the grounds of the medical center.
• Installs and maintains all types of equipment such as lavatories, commodes, showers, and dietetic equipment, hot water heaters, boilers, radiators, pressure regulating valves, sprinkler systems, sterilizers, steam traps, back-flow preventers, and all thermostatic equipment.
• Makes preventive maintenance inspections of all steam, water, and gas lines, and on fixtures and appliances, relative to those portions of utility systems.
• Performs the following related tasks in connection with said duties: pipe covering, welding, brazing, sheet metal work and minor electrical work such as controls on pumps and HV AC equipment, chrono-flow and motorized valves, vacuum pumps and pneumatic systems and piping or plumbing related to x-ray and dental equipment.
• Follows all Lock-Out Tag-Out procedures as required by OSHA and VA regulations.

Job reference:
008179Salary:
Starting from £26,000 + on call allowance and 27 days holidayClosing date:19/11/2024
Department: Delivery Frontline
Location: York - Bootham Park Hospital (Mobile position)

Employment Category: Employee
Hours Per Week: 37.5
We have a great opportunity for a Maintenance Operative-Fabric. This will be to join our team based in
York
-
Bootham Park Hospital .
The starting salary for this role is from £26,000
(depending on experience) plus on call allowance.This is a permanent, full time position working 37.5 hours per week.This is a mobile role covering the North Yorkshire area.
Requirements for the role:Qualifications - At least one of the below:

• NVQ Level 2 or higher BTEC/City & Guilds or equivalent in Plumbing/Carpentry
  and joinery.
• Formal apprenticeship or craft trained equivalent.

Additional Requirements:

• Driving licence is essential
• Must be comfortable using technological devices to log jobs.
• On-Call availability
• Desirable to have industry experience
• Ability to work alone and/or as part of a wider team as this role will require you to work cohesively with other Technical Disciplines.

Please note, DBS Checks & DVLA checks will be required for this role.
Key Responsibilities:

• Ensure compliance in accordance with Health, Safety & Wellbeing Policies, relevant company Technical Guidance, Process and Procedures, Statutory Regulations, Approved Codes of Practice and any applicable aspects of HTMs.
• Deliver Scheduled, Reactive and Remedial maintenance services as directed by the PPM planner (CAFM), helpdesk or Technical Services Supervisor, ensuring that operational standards are always maintained.
• To also support the work that is included in minor works mangers activities.
• Undertake routine repairs or minor works including joinery, painting and decoration, general building works, ground works or general plumbing.
• To maintain effective site log books at all company premises where required, ensuring that they are completed in a timely and accurate manner.
• Support the Projects/Construction team and Team Leader in delivering minor capital works to company premises.
• Complete suitable risk assessments prior to undertaking works and undertake works as per instructions within any relevant permit or work plan

What you need to do now
If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now.
If this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion about your career.

Hays Specialist Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at hays.co.uk

• Assist the Operations Manager/Executive & Building Supervisor on a day to day operations
• Attend to the breakdown of the air-conditioning system, plumbing and electrical issue
• Attend to complaints, calls and queries from tenants on operation related matters
• Troubleshoot some minor technical / facility problems
• Carry out preventive maintenance according to maintenance work schedule
• Conduct daily inspections (checklist)
• Recommend and suggest preventive maintenance or repair to the Operations Manager/Executive & Building Supervisor to minimize emergency breakdown of service
• Carry out joint inspections with the term service provider during the regular servicing
• Supervise to ensure that repair and replacement work are carried out properly by a term service provider or contractor in a timely manner
• To supervise & monitor term service providers & contractors to make sure they comply with workplace safety & health legislation, guideline & code of practice
• To sign off service provider service report
• To assist in Marcom events when necessary such as sound system & lightings
• To call & coordinate M&E breakdown with the service provider
• To inspect daily for units under fitting out during fit-out period and units under reinstatement
• Check the vacant unit/units which are taking-over or handing-over, to draw up technical / building specifications eg. to confirm the electrical / exhaust capacity, water & drainage provisions etc.

Main Responsibilities

1. Coordinate maintenance contractors, review checklists and ensure customer D.O. sign-off within the time.
2. Support Data analytics team with ongoing improvement on automation of data gathering, analysis and reporting, including fault detection and root cause identification
3. Prepare and maintain comprehensive energy conservation action plan to include previous and ongoing efforts and short, intermediate and long-term goals
4. Prepare operational and maintenance schedule as per MIS
5. Work closely and collaborate with the customer support team to ensure customer satisfaction.
6. Identify potential upselling opportunities at client site during regular or ad-hoc maintenance
7. Remote monitoring of the system operation and performance and reach site if any emergency.
8. Familiarization of Refrigeration System Chillers & Freezers, Compressors, Cooling towers, FCUs, Cold room, ETV doors and related controllers.
9. Working with a team and deliver the work within the planned schedule.
10. Collect the onsite operating parameters like cold room and space temperature and verify with SCADA.
11. Collaborate with Internal teams regarding any controls and programming related onsite works.

Qualifications

1. Diploma, Bachelor of Engineering Mechanical, Electrical or Equivalent
2. Electrical or Mechanical troubleshooting experience would be advantageous
3. HVAC knowledge of Chiller Plant, FCU, SCADA, Air side equipment
4. Strong communication and analytical skills.

Main Responsibilities

Maintain and monitor complex clients’ systems:

• Responsible for technical support for complex systems and problems, ensuring performance of the asset (client) is maintained throughout the course of the contract
• Collate and evaluate statistical data related to the performance of the assets
• Support Data analytics team with ongoing improvement on automation of data gathering, analysis and reporting, including fault detection and root cause identification

Manage responses to emergency situations:

• Facilitate responses to emergency situations and recovery activities
• Evaluate and provide fast resolution to critical field performance issues
• Visit sites to diagnose BBP operational issues and develop resolution plans for complex cases that cannot be easily resolved
• Review and approve recommended repair works for major equipment and system failures
• Check performance deviations and define root cause for any performance issues and to escalate to either Engineering or Performance team, as needed.

Provide oversight on maintenance work:

• Responsible for the planning of corrective, preventive and predictive maintenance activities to ensure BBP equipment and client systems are fully functional and in optimal operating condition, preserving BBP energy savings
• Optimise maintenance plans and schedules for inspection, testing, repair and predictive maintenance of equipment and systems to minimise downtime and costs
• Provide technical guidance on equipment and systems maintenance
• Endorse resourcing requirements to achieve operational state in accordance with BBP expectations
• Drive internal and subcontractor compliance with the health & safety standards and practices

Support Customer Support/Business Development teams in creating further business opportunities:

• Foster close collaboration with Customer support team to ensure client performance and satisfaction
• Advise customer support team to correct inefficient uses of energy, both technically and procedurally and to support with data justification
• Identify potential upselling opportunities at client site during regular or ad-hoc maintenance

Organise and develop the team:

• Coach and train Central Maintenance engineers
• Drive talent recruitment and development for the department in alignment with organisational strategy

Qualifications

• Diploma/Degree in Electrical or Mechanical Engineering, Controls, Energy or Environmental Engineering.
• Possess people management experience
• 2-5 years’ experience in an Energy or Mechanical Engineering is an added advantage
• Professional Energy/Sustainability related certification a plus
• Qualification in Refrigeration and Air-conditioning and Energy Management will be an added advantage
• Well versed with HVAC systems, basic knowledge, good understanding on ACMV system and equipment
• Ability to understand piping and ducting and to oversee installation of instrumentation works (power meters, temperature sensors, and pressure sensors).
• Strong written and oral communication skills for customer interaction and report writing
• A willingness to learn and work in a team environment with extensive contact with clients
• Strong communication skills with the ability to work autonomously
• Self-starter with strong analytical and troubleshooting skills
• High level of initiative with the ability to work under pressure and extended hours, if required to meet deadlines

Where you fit in

Maintenance Reliability Turn Around (MRTA) is about understanding and maintaining our equipment as effectively and efficiently as possible, making sure it performs as intended. The Maintenance discipline covers the development of Maintenance strategies and the planning, coordination, and execution of Maintenance activities. Maintenance ensures safe, defect free and efficient operations through the regular upkeep of equipment and tools in the most cost efficient and timely manner.

What’s the role?

As an Instrument/Quality Measuring Instrument (QMI) Field Execution Engineer/Assistant Engineer, you will be based in Shell Pulau Bukom under Maintenance Department with key accountabilities as the following:

• Provides day-to-day hands-on maintenance and troubleshooting including contractor/ specialist management for all Instrument/QMI maintenance related matters.
• Responsible for carrying out preventive and corrective maintenance works and ensuring plant equipment availability including instrumentation, control valves, analysers and the control system.
• Diagnose and troubleshoot instrumentation and control system malfunctions, ensuring timely resolution to minimize downtime.
• Perform preventive maintenance on instrumentation and control equipment by calibrating instruments, replacing components, and conducting routine checks.
• Develop and implement maintenance plans and procedures to ensure system integrity and performance.
• Analyse and interpret control system data to identify potential issues and optimize system performance.
• Support the development and implementation of upgrades and modifications to the instrument and control systems.
• Compliance to HSSE standards and requirements to make Shell Pulau Bukom a safe place to work, and accountable for all assigned Critical activities.
• Perform Authorized Applicant and/or Authorized Engineer as per Permit to Work (e-PTW) requirement.
• Participate in Asset Management System (AMS) & Maintenance Execution (ME) assessment and determine Instrument/QMI equipment maintenance task and schedule.
• Participate Field Acceptance Test/ Site Acceptance Test (FAT/SAT) and Functional testing to ensure equipment are meeting the design intent when required.
• Perform Instrument/QMI equipment condition monitoring & liaise with relevant subject matter experts (SME)/ specialist/ OEM to address any arising issues, problems & concerns.
• Prepares job specifications and costing for works involved and apply work clearance / permit for work execution.
• Participate and execute for Turnaround (TA)/ Pit-stop (PS) events in related Process Units (PUs).
• Maintains work requests and records on maintenance works using computerized maintenance management systems, GSAP-PM.
• Maintain accurate documentation for instrument and control systems, server systems, and maintenance activities. to ensure all equipment technical records and drawings are updated to reflect the latest changes.
• Contribute to the development of the annual operating budget of the section to ensure achievement operational targets of section.
• Attend Standby Duty callout to an Emergency work upon request

What we need from you

To be successful in this role, you will have:

• Assistant Engineer position: Minimum NITEC Level 2 certification in Instrumentation or Electronics or Electrical
• Engineer position: Minimum Diploma/Degree in Instrumentation or Electronics or Electrical
• 3-5 years of relevant experience in Instrument construction/ Maintenance in oil & gas, chemical/ petrochemical or related industries.
• Knowledge in basic control system and/or functional logic is an advantage.
• Proven ability to diagnose and troubleshoot instrument and control system malfunctions.
• Experience with calibration of industrial instrumentation.
• Understanding of control system principles (PLC, DCS) and communication protocols (OPC, Fieldbus, Modbus, HART, Vnet).
• Able to understand PID and have knowledge of instrumentation and control element
• Basic understanding of server system administration, including troubleshooting and maintenance procedures.
• SAP (GSAP) knowledge in Maintenance Module.
• Experience in field work interfacing and stakeholder’s engagement.
• Excellent communication, analytical, problem-solving, and troubleshooting skills.
• Self-motivated with a strong commitment to teamwork and collaboration and managing contractors and vendors.
• Able to work in Team environment as well as standalone when need arises.

Where you fit in

Purpose of the Maintenance Technician (Instrument) is to carry out hands-on maintenance and coordinates maintenance work related to instrumentation in Production Unit (PU). The role assures that activities on the weekly schedule, emergencies or assigned non routine maintenance work are executed with quality and efficiency and in compliance to the site Health, Safety and Environment requirements.

Accountabilities include:

• Provide day-to-day hands-on maintenance/troubleshooting of instrument related matters in PU.
• Ensure compliance of engineering practices and assets with statutory obligations, Engineering Codes of Practices and Shell DEP standards.
• Review and communicate daily / weekly schedule assignments with workforce. Plan / execute / obtain resources, materials, services, and equipment for E and SB priority work repairs.
• Ensure compliance with HSSE standards, Monitor and feedback on the maintenance effectiveness process and take corrective action if required, GSAP administration of time sheets, service, purchase, and material orders. Lead in the timely daily maintenance schedule execution, E/SB work order planning, E/SB reviews, daily updates
• Liaise with/consults Operations, Technology, other Engineering and Procurement departments as part of the execution of jobs
• Initiate and plan to upgrade instrument systems before obsolescence and deteriorations beyond repair.
• Perform end of day schedule progress (percent complete, MCMP, TECO and approve actual hours)
• Ensure completion of QA / QC and condition reports. Field presence and supervisor of maintenance contractor (craft productivity and quality of work) for effective and efficient execution
• Manage the activities in the hard schedule, adopting small adjustments or deviations where necessary. Feedback jobs that roll-over into next week(s) to the scheduler. Identify risks for not achieving schedule and taking mitigating action, keeping maintenance supervisor / team lead informed. Feedback to maintenance planning and scheduling
• Timely request to operations for maintenance permitting Analyze and trouble-shoot instrumentation problems
• Update and maintain spare parts inventory
• Seek improvement in techniques, procedures and technology to improve reliability at minimum costs and within budget.
• Report and recommend improvement on recurring problems/breakdowns
• Involve in scheduled safety walkabout
• Assess the risk of all day to day jobs that is carried out Develop formal JOHAN with all relevant parties for jobs with medium and high risk
• Full compliance with LSR & Safety Rules at all times to achieve Goal Zero

What we need from you:

To be successful in this role, you will have:

• Minimum NITEC Level 2 certification in Instrumentation or Electronics or Electrical, or Diploma/Degree in Instrumentation or Electronics or Electrical
• 3-5 years of relevant experience in Instrument construction/ Maintenance in oil & gas, chemical/ petrochemical or related industries.
• Knowledge in basic control system and/or functional logic is an advantage.
• Proven ability to diagnose and troubleshoot instrument and control system malfunctions.
• Experience with calibration of industrial instrumentation.
• Understanding of control system principles (PLC, DCS) and communication protocols (OPC, Fieldbus, Modbus, HART, Vnet).
• Able to understand PID and have knowledge of instrumentation and control element
• Basic understanding of server system administration, including troubleshooting and maintenance procedures.
• SAP (GSAP) knowledge in Maintenance Module.
• Experience in field work interfacing and stakeholder’s engagement.
• Excellent communication, analytical, problem-solving, and troubleshooting skills.
• Self-motivated with a strong commitment to teamwork and collaboration and managing contractors and vendors.
• Able to work in Team environment as well as standalone when need arises.