Total 22 Engineering job vacancies in Buin Batu, Sekongkang Kabupaten Sumbawa Barat

• Willing to be assigned to Project site as Civil Field Engineer
• Capable to conduct simple analysis for foundation and structure
• Capable to review bar bending schedule
• Capable to use STAAD PRO

• Minimum 8 years working experience in Oil & Gas Engineering design including a minimum 5 years working experience in C&A Engineering design work in onshore and/or offshore oil & gas projects.
• Shall have experience in carrying out Detailed Engineering.
• Shall have a thorough knowledge of the use of codes, standards and practice applicable to API, IEE, and IPF classification, selection of instruments and control/safety/fire and gas systems.

• Capable for developing Conceptual Flow Diagram /Operation Sequence of HVAC system for Technical Building (such as Substation and Control), Laboratory, Office, and other industrial building.
• Capable with good communication with other discipline (E&I) to get design information for basis developing HVAC design system and coordination with them for interface design installation.
• Capable and understand the HVAC Cooling Load Calculation and then make necessary adjustment if needed.
• Capable review product HVAC of vendor document such as: drawing, control panel, method statement, and commissioning.
• Capable and understand the requirement/material of HVAC Equipment such as: Air handling unit, Air cooled condensing unit / Air cooled water chiller, Fan / Pump, etc.
• Capable for project Scheduling of HVAC scope: develop project schedules, set milestones, and monitor the progress of each task to ensure timely completion.
• Has knowledge HVAC product brand in Indonesia.
• Experience in HVAC system for Building Modular is advantage.
• Willing to be assigned at project site to handle HVAC System Completion Work, Pre-commissioning, and Commissioning of HVAC work.

• Designing steel structure for Pipe rack and Equipment support structure for Oil/Gas and Petrochemical Plant in EPC Project.
• Providing calculation to design steel structure for Pipe Rack and Equipment support structure.
• Designing the modularization steel structure pipe rack and equipment steel structure is preferable.
• Experience in using STAAD PRO on the design for steel structure.

• Designing foundation for Buildings, Pipe rack, Equipment support, Equipment foundation such as Tanks, Vertical & Horizontal Vessels for Oil/Gas and Petrochemical Plant in EPC Project.
• Providing calculation to design foundation.
• Fluent in English (writing and speaking).
• Capability to use MAT3D and Foundation3D software is preferable.
• Capability to conduct foundation dynamic analysis is preferable.

• Full understanding of international codes and standards such as IEC, IEEE, ANSI, NEC, NEMA.
• Comprehensive knowledge of electrical design philosophy (system and construction design).
• Understand power system analysis and proficient in operating ETAP tool for load flow, short circuit, motor starting, transient study, harmonic analysis, and power factor correction.
• Familiar with Microsoft Office and Word.
• Working with responsibilities includes preparing & reviewing specifications, datasheets, load lists, requisitions, technical bid evaluations, calculations, BM & BQ, reviewing drawings, and vendor documents.
• Thorough understanding of electrical equipment testing and inspection.
• Strong capability in schedule and design quality control.
• Capable of working in a project team.
• Construction work experience.

• Experience in preparing Drainage Drawing and details and/or foundation drawing in EPC Project.
• Capable to provide 3D Model using SP3D and AP3D.
• Experience in using AutoCAD.

• Experience in several package / machinery equipment such as Nitrogen generation package, Air dryer package, Water treatment package, Chemical injection package, Process package, Marine loading arm, Overhead crane, and Solid handling equipment.
• Understand in Electrical, Instrument and Control requirements, process parameter in package equipment.
• Having several years of experience as a requisition engineer who has the role and responsibility for handling the equipment and materials.
• Preparation and update of the engineering documents and material requisition, Vendor inquiry and Technical Bid Evaluation, V-Doc review,
• Coordination with various internal disciplines including Vendor HAZOP and 3D model review, resolution of technical issues with the vendors, etc.

• You will work as SSD (Solid State Drive) package integration engineer in packaging engineering group.
• Leads new SSD product development from concept design and qualification to mass production.
• Generate innovative product concepts and transform them into tangible, market-ready products.
• Work closely with global functional teams in US, India, South Korea, and Israel, review feasibility design drawings and propose design options.
• Collaborate extensively with internal teams, validate design options through characterization builds, perform comprehensive DFX (Design for eXellence) analysis, including DFM (Design for Manufacturability), DFA (Design for Assembly), DFRW (Design for Rework), as well as Cost and UPH (unit per hour) analysis, review mechanical and electrical simulations, initiate assembly process flow, and deliver most optimized design for manufacturing with yield and quality.
• Ensuring build readiness, execute package qualification plan, follow up package reliability status, investigate and close failures on time.
• Monitor assembly and test yield on engineering/customer sample and low volume production builds. Drive yield improvement and manage excursions.
• Lead new product from low volume to high volume production transition with yield and quality meeting goals.
• Ensure FMEA, SOD, Control Plan, recipe guideline, SPC and other assembly controls are ready prior to high volume production.
• Lead new technology transition (new wafer tech/process/material) from engineering stage to volume production.

• Fully Understanding the International code and standards such as IEC, IEEE, ANSI, NEC, NEMA.
• Fully Understanding electrical philosophy in design (system and construction design).
• Power System analysis in ETAP for Load Flow, short circuit and motor starting, Transient Study, Harmonic, power factor correction.
• Familiar with general Microsoft office.
• Working with responsibilities review specification, datasheet, load list, requisition, technical bid evaluation, calculation, BM & BQ, review drawing, vendor document.
• Fully Understanding electrical equipment testing and inspection including in Pre-/commissioning stage.
• Strong capability with schedule and design quality control.
• Capable to work in one project team
• Construction Work experience
• Able to work in a remote areas (project site)

• Capable for foundation design
• Capable for steel structure design
• Capable for building design
• Capable to use STAAD Pro

• Capable to provide assessment regarding soil condition for the project
• Capable to provide soil investigation work specification, calculate soil and pile bearing capacity for shallow and deep foundation
• Capable to conduct slope stability analysis
• Capable to conduct deep excavation study and calculation
• Capable to conduct analysis and recommend best soil improvement technique
• Familiar with Geotech software such as Plaxis, All Pile, Geo 5 and any other geotechnic software

• Familiar with International Code & standard related to Rotating equipment such as API, ISO, ASME/ANSI, HI, NFPA, AGMA and others.
• Having several years of experience as a requisition engineer who has the role and responsibility for handling the equipment and materials.
• Preparation and update of the engineering documents and material requisition, Vendor inquiry and Technical Bid Evaluation, V-Doc review,
• Coordination with various internal disciplines including Vendor HAZOP and 3D model review, resolution of technical issues with the vendors, etc.

Position Summary: The Mechanical Testing and Reliability Technician is responsible for conducting mechanical tests to ensure product durability and performance. This role involves hands-on work with electro-mechanical lab equipment

• Mechanical and Environmental Testing: Perform mechanical testing, including vibration, shock, HALT, Insertion, and drop testing, as well as accelerated environmental testing in compliance with reliability standards.

• Lab Equipment Operation: Operate and maintain electro-mechanical lab equipment such as environmental chambers, vibration testers, shock testers, drop testers, and other relevant testing tools.

• Measurement and Data Analysis: Utilize measurement devices such as oscilloscopes, microscopes, strain gauges, and accelerometers to gather data, ensuring accurate and reliable test results.

• Schematics and Drawings Interpretation: Read and interpret simple schematics and mechanical drawings to guide testing procedures and fixture design.

• Test Fixture Development: Co-develop and design custom mechanical test fixtures for various package form factors

As a Test Engineer -Process, you will lead the Project improvement in Burn In area, and support execution and manufacturing issues related to Test Process, and continue improve manufacturing issues with new ideas from time to time through close collaboration across teams and disciplines. In addition, you'll drive Test Process improvements to make our systems more robust and scalable via systematic and proper tools.

As a Test Process Engineer, you’ll:

•Partner closely with product managers, NPI engineers, Assembly engineers, Manufacturing supervisor and QA to scope, plan, design, and build new features as well as maintain existing functionality.

•Hold your teammates—and yourself—to high engineering standards

•Leverage your experience and knowledge to grow your teammates’ technical breadth and depth through direct coaching and mentoring

•Identify potential problems and ensure quality related to Testing Process in manufacturing.

•Document and monitor testing outcomes and establish steps to remedy problems

•Detailed understanding of how to properly document test cases and create effective and focused testing plans

•Work closely with departments within the company for cost saving projects

•Provide detailed specifications for proposed solutions including time and scope involved

•Define clear goals for all aspects of a product test and develop steps for their proper execution