Total 165 Engineering job vacancies in 2 Meadowhead Industrial Estate Dunlop Drive IRVINE, KA11 5AU

職責與責任

• • 直接向生產經理報告並與他密切合作以實現部門目標。
  • 確保公司的品質系統在部門內被理解並實施。
  • 與生產計劃員緊密合作，參考主生產計劃啟動每日生產計劃，以滿足客戶訂單並能夠及時交貨。
  • 根據需要對所有現有製造流程進行監控、審查和改進（包括 MO 工廠 GC 分析和監控）
  • 研究新製程、新技術在我們製程中應用的可行性。
  • 檢查製程參數和製造日誌表。在適當的情況下建議任何改進、預防措施和糾正措施。
  • 監控/提高製程穩定性和製程安全性。有關過程控制的建議，以獲得更一致的品質。減少客戶投訴。
  • 對產品、流程和系統不合格項進行根本原因分析並實施糾正和預防措施，並對所採取措施的違規行為進行追蹤。
  • 收集和分析有關流程、公用事業以及流程和工廠設備效率的數據。研究並嘗試新的試驗項目/流程。
  • 培訓和發展下屬，提高能力和知識。
  • 透過了解和了解現場 EHS 標準來維護安全的工作環境，並確保遵守地方、州和聯邦 EHS 法規。
  • 根據上級要求執行任何其他臨時任務。

要求

• • 候選人應至少擁有化學工程學位或同等學歷。
  • 至少2年製造環境相關經驗。
  • 化學製造業的工作經驗是一個額外的優勢。
  • 熟悉 ISO 9001 是額外優勢。
  • 最好熟悉執行工藝工程改進活動並管理合理的員工規模。
  • 必要時能夠在正常工作時間之外工作。
  • 能夠獨立工作或在較小的監督下工作。
  • 良好的英語和馬來語書面和口語溝通能力。
  • 精通 Microsoft Word 和 Excel。

津貼和福利

• 醫療保險
• 雜項津貼
• 小費
• 較高的 EPF 百分比

• 職責與責任
  • 直接向生產經理/助理生產經理報告並與他密切合作以實現部門目標。
  • 確保公司的品質系統在部門內被理解並實施。
  • 與生產計劃員緊密合作，參考主生產計劃啟動每日生產計劃，以滿足客戶訂單並能夠及時交貨。
  • 監控、審查並根據需要對所有現有製造流程進行改進，包括噴霧乾燥設備和煙囪的氣流測試。
  • 協助部門主管完成月末結算和報告。
  • 檢查製程參數和製造日誌表。在適當的情況下建議任何改進、預防措施和糾正措施。
  • 審查每日生產報告並根據生產計劃監控實際生產。
  • 確保對產品、流程和系統不合格項採取糾正和預防措施，並對所採取措施的違規行為採取後續行動。
  • 帶領值班主管實現工廠平穩且有效率的運行，以達到營運目標。
  • 培訓和發展技術人員並提高能力和知識。
  • 進行審核、檢查和 HIRARC 評估。
  • 檢測現有或潛在的健康和安全隱患，識別差距並提出糾正和預防措施建議。
  • 透過了解和了解現場 EHS 標準來維護安全的工作環境，並確保遵守地方、州和聯邦 EHS 法規。
  • 根據上級要求執行任何其他臨時任務。
• 要求
  • 候選人應至少擁有化學工程學位或同等學歷。
  • 至少2年製造環境相關經驗。
  • 化學製造業的工作經驗是一個額外的優勢。
  • 熟練使用 AutoCAD 計算機。
  • 有噴霧乾燥設備或濾袋系統經驗者優先。
  • 熟悉 ISO 9001 是額外優勢。
  • 必要時能夠在正常工作時間之外工作。
  • 能夠獨立工作或在較小的監督下工作。
  • 良好的英語和馬來語書面和口語溝通能力。

津貼和福利

• 醫療保險
• 雜項津貼
• 小費
• 較高的 EPF 百分比

• Duties & Responsibilities
  • To report directly to Production Manager/ Assistant Production Manager and work closely with him to achieve departmental objective.        
  • To ensure the company’s quality system is understood in the department and implemented.
  • To work closely with production planner to initiate Daily Production Schedule with the reference to Master Production Schedule to meet customer orders and be able to deliver timely. 
  • To monitor, review and make improvement if required on all existing manufacturing processes which including the air flow testing at spray dried plant and chimney.
  • To assist department head in month end closing and reporting.
  • To review process parameters and manufacturing log sheets. To recommend any improvements, preventive actions and corrective actions where appropriate.
  • To review daily production report and to monitor actual production against the production schedule.
  • To ensure corrective and preventive action is taken for product, process, and system non-conformances and to follow-up on the offences of the action taken.
  • To lead shift supervisor to achieve smooth and efficient running of plant to meet operation target.
  • To train and develop technicians and improve competency and knowledge.
  • To carry out audits, inspections, and HIRARC assessment.
  • To detect existing or potential health and safety hazards, gaps identification and recommend corrective and preventive measures. 
  • To maintain a safe working environment with awareness and knowledge of site EHS standards and ensure compliance with local, state and federal EHS regulations.
  • To perform any other ad-hoc task as and when required by the superior.
• Requirements
  • Candidate should possess at least a Degree in Chemical Engineering or equivalent.
  • At least 2 years related experience manufacturing environment.
  • Working experience in chemical manufacturing industry is an added advantage.
  • Computer literate in AutoCAD.
  • Experience in spray dried plant or filter bag system is an advantage.
  • Good knowledge in ISO 9001 is an added advantage.
  • Able to work beyond normal working hours when necessary.
  • Able to work independently or with minor supervision.
  • Good communication skills in English and Bahasa Malaysia, both written and spoken.

Perks & Benefits

• Medical insurance
• Miscellaneous allowance
• Gratuity
• Higher % EPF

• Duties & Responsibilities
  • To report directly to Production Manager and work closely with him to achieve departmental objective.
  • To ensure the company’s quality system is understood in the department and implemented.
  • To work closely with production planner to initiate Daily Production Schedule with the reference to Master Production Schedule to meet customer orders and be able to deliver timely.
  • To monitor, review and make improvement if required on all existing manufacturing processes (including MO Plant GC analysis and monitoring)
  • To study feasibility of new process and new technology to apply in our process.
  • To review process parameters and manufacturing log sheets. To recommend any improvements, preventive actions and corrective actions where appropriate.
  • To monitor/ improve process stability and process safety. Advice on process control to have more consistent quality. Reduce customer complaint.
  • To perform root cause analysis and implement corrective and preventive action for product, process and system non-conformances and to follow-up on the offences of the action taken.
  • To gather and analyses data on process, utilities and efficiency of process and plant equipment. Study and try new trial project/process.
  • To train and develop subordinated and improve competency and knowledge.
  • To maintain a safe working environment with awareness and knowledge of site EHS standards and ensure compliance with local, state and federal EHS regulations.
  • To perform any other ad-hoc task as and when required by the superior.
• Requirements
  • Candidate should possess at least a Degree in Chemical Engineering or equivalent.
  • At least 2 years related experience manufacturing environment.
  • Working experience in chemical manufacturing industry is an added advantage.
  • Good knowledge in ISO 9001 is an added advantage.
  • Preferably those familiar in carrying out process engineering improvement activities.
  • Able to work beyond normal working hours when necessary.
  • Able to work independently or with minor supervision.
  • Good communication skills in English and Bahasa Malaysia, both written and spoken.
  • Proficient in Microsoft Word and Excel.

Perks & Benefits

• Medical insurance
• Miscellaneous allowance
• Gratuity
• Higher % EPF

We are seeking a highly skilled and motivated CNC Process Engineer to join our team. The ideal candidate will be responsible for optimizing manufacturing processes related to CNC machining operations. The CNC Process Engineer will play a crucial role in ensuring product quality, safety compliance, and operational efficiency. Key responsibilities include:

1. Technical Analysis: Conducting thorough technical analyses to identify areas for improvement in CNC machining processes.

2. Safety and Compliance: Ensuring that CNC machining processes comply with safety regulations and industry standards. Assessing potential hazards, developing safety protocols, and implementing measures to minimize risks to personnel and the environment.

3. Quality Control: Maintaining product quality by implementing robust quality control measures throughout the CNC machining process. This includes monitoring key performance indicators, conducting quality inspections, and troubleshooting quality issues.

4. Process Optimization: Continuously working to optimize CNC machining processes to improve efficiency, reduce costs, and minimize waste.

5. Documentation and Reporting: Documenting CNC process designs, operating procedures, and performance data. Providing clear and comprehensive reports on process performance and improvement initiatives.

6. Training and Support: Providing training and support to CNC machine operators and other personnel involved in implementing and operating CNC machining processes.

7. Continuous Improvement: Participating in continuous improvement initiatives to identify opportunities for process optimization and innovation. Staying informed about industry trends, emerging technologies, and best practices in CNC machining.

Requirements:

- Bachelor's degree in Mechanical Engineering, Industrial Engineering, or related field.

- Candidate must possess at least a Bachelor's Degree, Post Graduate Diploma, Professional Degree in Engineering (Mechanical/Industrial), or equivalent.

- Proven experience in CNC machining processes and operations.

- At least 3 year(s) of working experience in the engineering and manufacturing environment.

- Knowledge and skills in SPC/MSA/8D

If you are passionate about optimizing CNC machining processes and ensuring operational excellence, we encourage you to apply for this exciting opportunity. Join us in driving innovation and excellence in manufacturing.

Perks & Benefits

• Regular team activities
• Medical insurance
• Open culture
• Personal development opportunities

JOB DESCRIPTION:

1)   Assists Design Manager/Supervisor in machine concept & design.

2)  Discuss with related customers & take necessary measurements of sample parts before designing.

3)   Design machine jigs, fixtures and parts

4)   Modify/ additional / replacement parts drawing.

5)  Ensure all drawings draught have to approved according to documents registration flow chart.

6)    Ensure design activity record to be filled up accurately.

REQUIRED SKILL & QUALIFICATION:

1)   Minimum with Diploma / Degree in Mechanical Engineering or related.

2)   Knowledge in Autocad / Inventor software

3)   At least 2-3 years working experience in related field.

4) Able to speak Mandarin will be added advantage

Perks & Benefits

• Employee equity
• Commission and bonus
• Personal leave

Job Responsibilities:

• To coordinate new test run of new mould supplied by customer or in-house tooling.
• To establish process that produces the best product quality with minimum cycle time at the same time taking care of machine and mould safety.
• To perform evaluation of new or existing mould, new product and machines: anticipate specific problem from machine, process, mould or material.
• To perform interior product analysis and investigation.
• To perform process improvement and contribute ideas for project further improvement.
• To interact with the counterpart on the customer side on any technical and quality issues when required.
• To monitor and perform SPC on new product before mass production on progress.
• To ensure proper engineering documentation and working manual for all products.
• To collaborate with other departments from new project till part approval stage included attending NPEA meeting and Capability Review Meeting.

Requirements:

• Process at least Diploma in Engineering or equivalent with at least 2 years relevant experience in a Plastic Injection Molding manufacturing environment.
• Excellent in analysis of root causes and use statistical chart.
• Strong planning, analytical thinker and problem solving skill.
• Good interpersonal skill, ability to work as part of team, to motivate team efforts and to deliver targets within realistic timelines.
• Pro- active and able to work independently with minima supervision.

Perks & Benefits:

• Open culture
• Personal development opportunities
• 5-day workweek

職位描述：

1) 協助設計經理/主管進行機器概念和設計。

2) 設計前與相關客戶討論並對樣品進行必要的測量。

3) 設計機械夾具、固定裝置和零件

4) 修改/附加/更換零件圖。

5) 確保所有圖面草稿均依照文件登記流程圖獲得批准。

6) 確保設計活動記錄填寫準確。

所需技能和資格：

1) 至少擁有機械工程或相關專業的文憑/學位。

2) Autocad / Inventor 軟體知識

3) 至少2-3年相關領域工作經驗。

4)會說國語將加分

津貼和福利

• 員工股權
• 佣金和獎金
• 事假

工作職責：

• 協調客戶或內部工具提供的新模具的新試運行。
• 建立以最短的周期時間生產最佳產品品質的流程，同時注意機器和模具的安全。
• 對新的或現有的模具、新產品和機器進行評估：預測機器、製程、模具或材料的具體問題。
• 進行室內產品分析和調查。
• 進行流程改進並為專案進一步改進提供想法。
• 必要時與客戶方就任何技術和品質問題進行互動。
• 在新產品批量生產前對進度進行監控和執行SPC。
• 確保所有產品都有適當的工程文件和工作手冊。
• 從新項目到零件批准階段與其他部門的合作包括參加NPEA會議和能力審查會議。

要求：

• 至少獲得工程文憑或同等學歷，並在塑膠射出製造環境中擁有至少 2 年相關經驗。
• 擅長分析根本原因並使用統計圖表。
• 強大的計劃、分析思考能力和解決問題的能力。
• 良好的人際交往能力，能夠作為團隊的一部分工作，激勵團隊努力並在現實的時間內實現目標。
• 積極主動，能夠在最少的監督下獨立工作。

津貼和福利：

• 開放文化
• 個人發展機會
• 每週工作 5 天

Position : Intern – Electrical Engineering

Location : U1 Hicom Glenmarie, Shah Alam

Allowance : RM 500.00/ per month

Job Types : Contract

Total Vacant : 10

Job Description:

• Assist and demonstrated in electrical and electronic circuits, and devices, and a strong aptitude for working with sensors, and actuator applications, as well as proficiency in programming.
• Proficiency in practical, hands-on tasks, including working with wires, soldering, and utilizing tools essential for assembling and integrating animatronics systems/solutions into brick models.
• To execute the build of any brick components/parts design given from immediate supervisor and to develop 3D designing skills.
• To manage and plan the timeline given in order to progress the whole bricks models productions/projects.
• Must always be a good team player and work together with the team to achieve the team’s ultimate goal.
• Close collaboration with the Lead Designer to work on the visual style of the products.
• To coordinate some milestone and progress with other departments i.e (steel and composite).
• To perform other duties as and when it is required from time to time.

Job Requirements:

• Certificates, Diploma or Degree in Industrial Design/ Arts/ Creative/ Graphic Design or equivalent.
• Fresh graduates are highly encouraged to apply.
• Strong interest in hands-on work.
• Passion to learn new skills and adapt to agile environment.

Benefit: 

• Friendly working environment with up-to-date IT equipment 
• 5-day working day, Monday to Friday 
• Medical allowance (prorated) 
• Training provided 
• Career growth opportunities 

Send your CV and Resume to us at:  

Email : hr@bryks.art  

Contact : +60355699566 

Kualifikasi :

• Pendidikan Minimal D III Akuntansi
• Usia Maksimum 40 tahun
• Pengalaman Finance minimal 5 tahun
• Pernah bekerja di perusahaan manufacturing ( Prefer Otomotif)

Jobdesc:

- Analisa laporan Laba Rugi, Neraca dan arus kas.

- Cek dan koreksi AR AP

- Cek dan koreksi pph ppn bulanan

- Buat koreksi fiskal ketika buat SPT tahunan.

- Berpengalaman membuat Business Plan

- Berpengalaman buat laporan Simodis

- Berpengalaman buat laporan BI ULN dan LLD

Qualifications:

• Diploma / Bachelor’s Degree in Mechatronics or Automation Engineering
• Minimum 2 years’ experience
• Experience in automated industrials,production machining design controls and PLCS
• Have experience in designing spesial purpose machine
• Have experience in automation system and moving part or mechanism and electrical design
• Have a good understanding of automation standard part and material
• Have a good understanding of flowchart and circuit diagram
• Proficient using 2D/3D Cad
• Have Creativity,logic,vision,trouble shooting and problem solving skills
• Acurate,high attention to detail and a part learner

Job Description :

• Reviewing and evaluating the existing process to be automated
• Breaking down the concept into requirement and cost budgeting
• Design automation system and requirement using engineering tools until its ready to be used
• planing project time
• providing reports and documentation

Job Purpose

To be part of the development team for global IoT projects. We have set direction on global system integration, with local in-process Quality enhancement projects to be carried out in the next few years. The candidate needs to possess the necessary skillset and experience to work together with the team on the development, and implementation of these projects.

Nature of Scope

1. Software development mainly related to digitalization, and process quality enhancement.

2. Support end-users in usage of Plasma and SAP and help to resolve any operational issues, including working together with vendors (HQ and SAP Vendor) if necessary.

3. Understand in detail, the operation flow, and usage of all local existing systems.

5. Support migration Activities of Existing Plasma Info Server to SAP.

6. Support & ensure successful implementation of Company-wide Automation (ERP/IoT) Projects.

Experience

1. At least 2 years of experience in software development for factory or warehouse automation

2. Proficient in VB6 and VB.Net Programming, SQL Programming, Oracle DB and PHP Programming

3. Experience in SQL database design

4. Able to travel to Indonesia (Batam) / Japan for work when required

Job Purpose

To assist Department Head in the Implementation of Projects, and carry out the assigned scope of work that is essential for the smooth Operation of Production Lines.

Nature of Scope

1. Development/Co-Development/Transfer, Setup, Confirmation, and Debugging of Automated Test Equipment (ATE)

2. Line Support & Preventive Maintenance

a. Trouble-shooting, identify and rectify Line Errors.
(Failure Analysis)

b. Support Trouble-shooters in the Analysis of Failure by confirming
failure is not due to ATE issues.

3. DCS Software Line Support

4. First Article Evaluation

a. Understand the reason for FA Evaluation

b. Know the details of change

c. Confirm the changes are in place (Especially PPE related changes example FK1 revision, Label related revision, Laser related revision.

3. Document Management & Reporting

a. Progress Reporting

b. Proper filing of Design, Development & Debugging Report.

4 Other ah-hoc duties assigned by Superior.

First 3 months probation basic $2600, after confirmation is $2700!

Industry: Engineering

Located at Chai Chee

Japanese MNC

Have AWS + Bonus + Yearly increment

Job Description

• Assist Supervisor in day-to-day operation lines.
• Planning & Co-coordinating the workflow on production lines to achieve production targets.
• Trouble shooting production problems and assist in planning new project work.
• Groom to be leader

Requirements

• Diploma in Engineering
• No experience / fresh entry welcome to apply

Applications:

Please submit a copy of your updated CV in MS Word format stating to emilyfong@atomrecruit.com:

• Current Salary
• Expected Salary
• Date of Available and Reason for Leaving

All applicant will treated private and confidential

Emily Fong

Senior Talent Specialist

Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443

EA Personnel Reg No.: R1768368