Total 56 Maintenance / Repair job vacancies in Selangor

JOB SUMMARY

· To carry out general maintenance work as directed by Assistant Manager and Supervisor/ Senior Supervisor/Officer.

· To operate the road sweeper, water tanker, truck and other operation vehicles as instructed.

JOB TASK

1 To operate the respective operations vehicles such as :-

• Road Sweeper for sweeping of pavement
•  Lorry c/w crane for carrying and lifting of goods
• Water Tanker for water supply
• Van and other operations vehicles

2. Carry out maintenance work as directed by Assistant Manager and Supervisor / Senior Supervisor / Officer.

3. To be part of the Emergency Response Team to attend to emergency situation.

4 All structures and facilities along the highway and assist in traffic management.

5.  Undertake other duties as directed by the Head of Department.

JOB REQUIREMENT

• Minimum SPM
• Minimum 2 years’ experience in driving lorry / truck and carrying out maintenance work.
• Possess a valid driving license Class D, GDL and E.
• Good teamwork and commitment.

Job Scope

1. To ensure all daily maintenance works being carried out and recorded for reference
2. To closely monitor the e-works status and to resolve within the time frame.
3. To monitor any contractor or 3^rd party working along the ALR’s expressway. To check their permit, insurance and type of work. Shall report to superior if any non-compliance detected.
4. To abide with on-call roster and to re-arrange the schedule with colleague if not fit to work.
5. To ensure all works executed are in-line with the procedure and work instruction. Understanding the company policy, departmental procedures is a must.
6. Responsible to attend any breakdown, complaint or any task given by the upper-level superior.
7. Ensure proper handling of company’s vehicle, tools and machineries. To report immediately to superior if any damage or fault found.
8. Safe working environment and buddy system are always practiced.

Key Task

1. A competent person who registered with Suruhanjaya Tenaga (ST) and his/her workplace registered with either KESAS, LIRTAK, SPRINT or SMART.
2. Permit to enter any place which require a competent person such as generator set room.

Job Requirements

Qualification : Minimum A4 Chargeman certificate.

Experience : At least 2 years working experience or 1 year in similar field.

Specific skills / abilities : B2, D driving license. Having GDL is an advantage. Able to work long hours and willing to work during public holiday.

Job Scope

1. To complete all maintenance works in a timely manner and meet the established quality standards along all Lebuhraya under ALR's Group.
2. To assist the Assistant Manager in monitoring and supervising maintenance works undertaken by contractors.

Key Task

1. To assist the Assistant Manager in monitoring and supervising all maintenance activities including upgrading and heavy repair works to ensure its timely completion.
2. Carry out the maintenance works as scheduled and complete the works on time and quality, meeting the established maintenance standards.
3. Assist the management through regular inspections of the highway structures, pavement, drainage, etc. and report on its conditions.
4. To be part of the Emergency Response Team to attend to all emergency situations when instructed.
5. Undertake other duties as directed by the Head of Department.

Key Areas

1. Pavement
2. Drainage System
3. Building and Bridge Structures
4. Highway Accessories
5. Fencing
6. Signages
7. Traffic Safety Equipment (e.g. NJBs, guardrails, etc.)

 Relationships

1. Liaise with Local Authorities & LLM
2. Liaise with suppliers and contractors.

Requirements

• Certificate or Diploma in Civil Engineering
• Minimum 2 years in supervisory role in construction / engineering projects.
• Highway Engineering, pavement systems.
• Good teamwork, supervisory skills and work with urgency.

Scope of Responsibilities

1. To ensure the satisfactory operation of all the specialized/TCS equipment and installations at all times.

2. To ensure services delivery are meeting the maintenance standard and requirement such as LLM APST, SIRIM ISO and Internal Audit:

• In-charge of maintenance and improvement works for Toll Collection System
• Timeliness in completing assigned tasks
• To supervise and monitor the Preventive and Corrective Maintenance and Enhancement works carried out by contractors / junior staff

3. To ensure compliance with regulations, related to the Environmental Quality Act, Safety and Health Act, and management system standards, while ensuring that the QESH achieves its intended results by incorporating

• a process approach, risk-based thinking, and implementing improvements to enhance performance.

1. Key Tasks
2.  To carry out Preventive and Corrective maintenance works.
3. To carry out 1^st level of maintenance works.
4. To prepare maintenance report on any malfunctions / defects affecting equipment.
5. To repair electronic equipment / machines.
6. To inspect all the specialised / TCS equipment.
7. To be part of the Emergency Response Team and attend to emergency situation when instructed.
8. To monitor and supervise works undertaken by maintenance contractor / junior staff.
9. To monitor and supervise interfacing works undertaken by other party which are related to the system or equipment installed.
10. To provide assistance and technical advice to other team members / maintenance contractor.
11. To perform standby duties and response promptly in the event of any equipment or system failure / malfunction in meeting the Emergency Call Back standard.
12. To attend, rectify and update status of defect or request raised in the e-Work System.
13. To attend, check and update status of the defect raised i.e. NOD / NCR in the Expressway Performance Indicator System (EPI) of LLM.
14. To prepare Requisition Form (RF) in e-PO System in obtaining management approval for the Purchase Order (PO) issuance to maintenance contractors.
15. To assist TCS section for yearly budgeting for maintenance and improvement budget i.e. minor repair, enhancement, consumable and capex.
16. To exercise safety at site for own and ensure safety procedure is implemented by contractor at work as per OSHA requirements.
17. To undertake any job assignment / improvement / planning work related to TCS and meet the needs or requirements of the company business.
18. To undertake other duties as directed by the Head of Group Mechanical, Electrical and Instrumentation.

Job Requirement:

• Diploma or Certificate in Electronic Engineering from Local University / Technical Institution or equivalent.
• Minimum 2 years experience in repair and maintenance of electronic equipment
• Well verse with Toll Collection System maintenance.
• Good communication skills in Malay,English language for both spoken and written
• Ability to work under pressure, independent and possess analytical and logical thinking.

At Konica Minolta, our Mission is to be the ideal business partner of choice in Office Business and IT Services solutions. Through collaboration between our colleagues, partners and customers, we strive to enrich the society through constant innovation and development of solution driven tools.

Job Brief:

To efficiently and effectively maintain all Konica Minolta products in the field at optimum operational level at all times.

Job Responsibilities:

• Ensure the proper service, maintenance and repair of all Konica Minolta products in the designated areas and such service to be carried out promptly, efficiently and courteously.
• Be ready to assist other area / branch when needs arise.
• Installation of printer/scan/fax drivers, applications/software settings on machines/PCs, resolving issues crop up on solutions/applications sold by Konica Minolta, are part of the job responsibilities.
• Ensure all service jobs are properly recorded in Service Reports with all relevant information as requested and such reports must be submitted to Superior same day of service or latest next morning.
• Ensure all parts required are properly recorded in Spare Parts Requisition Form and to acknowledge receipt of parts taken at all times. Unused parts/ spoilt parts must be returned to Spare Parts Department same day or latest next morning.
• To call the Office upon arriving at customer's site and after completion of service calls or as at when directed to do so.
• To attend all Konica Minolta products' service training and any refresher course as may be considered necessary from time to time and/or as directed, and keep up-to-date all technical service bulletins, manuals, modification kits etc as given/taught from time to time.
• Ensure all Company information – spare parts price list, service manuals, technical service bulletins etc are kept confidential and not fall into unauthorized hands.
• Not to service, maintain or repair any competitor models unless instructed to do so by Superior, and not to reveal/discuss with any outsiders/customers any problems/information relating to Konica Minolta products except in the strict performance of your job functions.
• Perform other related duties as and when directed by Superior.

Job Requirement:

• Candidate should possess a Diploma / Advanced Diploma or equivalent in Engineering (Computer / Telecommunication),Engineering (Electrical / Electronic),Engineering (Mechanical),Engineering (Industrial)
• Preferably Intern specializing in Maintenance / Repair or equivalent.
• Fresh graduates are encouraged to apply
• Good communication skills in English, Malay language for both spoken and written

• Perform basic laboratory test as per accordance with approved test methods or procedures.
• Assisting Chemist / Microbiologist in carrying out laboratory testing, method development and compliance with QA/QC requirement.
• Ensure Good Housekeeping and Good Laboratory Practice (GLP) in the laboratory.
• Ensure the sample preparation equipment are used and maintained in proper way.
• Adhere to group HSE safety procedures.
• Make sure all relevant raw data or test information to be correctly and accurately recorded in the provided raw data sheet or manual log book.
• To comply with all Health, Safety and Environment (HSE) local regulation (Occupational Safety and Health Act 1996, Factory and Machinery Act 1967, Environmental Quality Act 1974).
• To perform any other task as assigned by his/her superior.
• To report any hazard/risk, near-miss and incident in Crystal system.
• Ensure that all Operational Integrity Management System (OIMS) requirements are met.

D-ploy is an IT and Engineering Solutions company with operations throughout the EMEA region including Switzerland, Germany, Czech Republic, Austria, UK, as well as the USA.

We pride ourselves on delivering innovative and superior services and solutions to numerous industry-leading clients. By building relationships and trusted partnerships within the IT community, we optimize our customer‘s IT productivity and contribute to the organization’s success and value.

We are interested in talking to engaging, flexible, and solution-oriented individuals who are looking to become a part of a dynamically growing and international organization. We are focused on creating value where IT counts, join us!

For the position, we are currently looking for a professional working for us on a contractor base and for a limited amount of hours per week (20 hours)

Tasks and Responsibilities

• Provide technical and troubleshooting assistance related to computer hardware and software, mobile devices and other tech tools and products
• First and second level technical support – calls/tickets/user interaction
• Provide prompt responses to IT related questions from end-users
• Reliable documentation of all end-user interactions in customer ticket system ‘Service Now’ (e.g., incidents, requests)
• Create, maintain, utilize knowledge articles
• Provide IT onboarding trainings to new starters
• Contribute to continuous improvement initiatives

• Language skills: fluent English and Malay, other languages are a plus
• 2+ years of experience in a similar role
• Strong problem solving/analytical abilities
• Excellent communication skills and customer orientation
• Attention to detail and ability to multi-task, handling multiple stakeholders
• Ability to prioritize and willingness to work self-sufficiently and well organized
• Team player and supportive personality
• Experience in regulated IT environments is a plus (e.g. GxP)
• All candidates must provide a Criminal record not older than 3 months

• Broad range of activities, tasks, and projects

• Flexible working conditions
• Vouchers (B-day voucher, wedding, and new born surprise)
• Fishing for Friends program – our referral program
• Refreshments in the D-ploy office
• Further development and professional advancement
• Friendly and international working environment
• Company-sponsored events
• Competitive salary and various benefits

Is IT in your DNA?

• Perform basic laboratory test as per accordance with approved test methods or procedures.
• Assisting Chemist / Microbiologist in carrying out laboratory testing, method development and compliance with QA/QC requirement.
• Ensure Good Housekeeping and Good Laboratory Practice (GLP) in the laboratory.
• Ensure the sample preparation equipment are used and maintained in proper way.
• Adhere to group HSE safety procedures.
• Make sure all relevant raw data or test information to be correctly and accurately recorded in the provided raw data sheet or manual log book.
• To comply with all Health, Safety and Environment (HSE) local regulation (Occupational Safety and Health Act 1996, Factory and Machinery Act 1967, Environmental Quality Act 1974).
• To perform any other task as assigned by his/her superior.
• To report any hazard/risk, near-miss and incident in Crystal system.
• Ensure that all Operational Integrity Management System (OIMS) requirements are met.

Assignments

• Perform daily monitoring, preventive and/or corrective maintenance works on equipment and building installations.
• Coordinate work of suppliers and supervise the assigned maintenance activities, repair, shut downs and overhaul works.
• Support operation of the unit by ensuring minimum response time to breakdowns and securing equipment utilization (EQU) goals.
• Maintain good housekeeping and safety practices in warehouse operations and maintenance supporting areas.
• Responsible to ensure all activities assigned are done according with the schedule set in the Maintenance Plan.
• Contributes to identification of suppliers and procurement of parts required for maintenance works.
• Keep track and ensure inventory control for maintenance spare parts and tools.
• Provide feedback and give suggestions to improve equipment performance and availability.
• Respond to emergency calls for any troubleshooting required at site.
• Produce weekly and/or monthly technical reports on maintenance activities.

• Carry out maintenance and project activities for electrical and instrumentation properly, and handle ambient noise, B3, solid, and liquid waste in accordance with SOP, superior guidance, and standards/directions from the SHE team.
• Play an active role and inform superiors, GA, and managers if there are equipment, tools, licenses, and calibrations that are about to expire, both for the equipment and themselves.
• Carry out repairs, additional equipment, modifications, and preventive and predictive maintenance. Perform repairs and modifications according to the fixed plans, and report any changes to the implementation of planning related to planning changes requested by the production team due to urgent or emergency conditions.
• Control the use of spare parts and report any use/replacement.
• Clean work tools after use, record the work tools that have been used, and maintain the condition of work tools.
• Continue/replace the work of other colleagues who are absent in accordance with superiors’ instructions and applicable overtime/compensation procedures.
• Provide a report to superiors (direct communication) if there is a problem that cannot be resolved within a certain time limit for the shift in accordance with applicable procedures.
• Control work health and safety principles in shifts.
• Ensure the cleanliness of the work area after making modifications and repairs to process machines according to target.
• Achieve targets according to quality objectives.

• Carry out maintenance and project activities for electrical and instrumentation properly, and handle ambient noise, B3, solid, and liquid waste in accordance with SOP, superior guidance, and standards/directions from the SHE team.
• Play an active role and inform superiors, GA, and managers if there are equipment, tools, licenses, and calibrations that are about to expire, both for the equipment and themselves.
• Carry out repairs, additional equipment, modifications, and preventive and predictive maintenance. Perform repairs and modifications according to the fixed plans, and report any changes to the implementation of planning related to planning changes requested by the production team due to urgent or emergency conditions.
• Control the use of spare parts and report any use/replacement.
• Clean work tools after use, record the work tools that have been used, and maintain the condition of work tools.
• Continue/replace the work of other colleagues who are absent in accordance with superiors’ instructions and applicable overtime/compensation procedures.
• Provide a report to superiors (direct communication) if there is a problem that cannot be resolved within a certain time limit for the shift in accordance with applicable procedures.
• Control work health and safety principles in shifts.
• Ensure the cleanliness of the work area after making modifications and repairs to process machines according to target.
• Achieve targets according to quality objectives.