Total 33 Manufacturing / Production job vacancies in York Station, YO24 1AB

The Boiler Plant Operator utilizes manual and automatic controls to operate multiple utility systems on a continuing basis in accordance with State and Federal regulations and will function as a critical and integral part of the safe and efficient operation of the boiler plant and associated energy systems. Duties include but are not limited to:

• Oversee the areas of operations, maintenance, and repairs in a with minimal or no guidance from supervision.
• Maintaining boiler plant operations when transitioning from multiple fuel sources.
• Troubleshooting and adjusting plant and mechanical systems to ensure proper functioning.
• Maintaining repair equipment needed for routine maintenance.
• Reading gauges, meters, verifying steam pressure and recording maintenance data.
• Maintaining fuel tank levels in accordance with plant operating procedures
• Performing routine testing to determine proper pH balance, heavy metals and hazardous chemicals.
• Performing efficient and economical generation of steam producing systems.
• Performing operational repairs of limited to moderate complexity.
• Following instructions as provided by diagrams, drawings and operating manuals.
• Receiving fuel oil from tractor trailers and other suppliers while following all safety regulations
• Making judgments and decisions based on supervisory guidance and protocol.
• Maintaining boiler plant operations when transitioning from multiple fuel sources.
• Work from heights, confined spaces, tight spaces, from ladders and manlifts.

Duties include but are not limited to:
- Responsible for the utilization and maintenance of all automobiles, trucks, buses and special purpose vehicles and equipment owned by or leased to VAWNYHS (Batavia).
- Keep continuously aware of VAWNYHS (Batavia) needs and weather conditions, making available and scheduling vehicles accordingly, and carries out directions, policies and procedures issued by the Engineering Manager.
- Participates with his/her supervisor in the selection, promotion or reassignment of staff and recommends disciplinary actions and incentive awards, plans for improving work performances and training programs.
- Organizes and directs staff in productive daily work schedules, and accomplishes work within established policies of EMS.
- Responsible for ordering and stocking repair parts, supplies, materials, and equipment and participates in preliminary planning of budget for various control points.
- Creates 1358's for all transportation costs.
- Responsible for the maintenance of Medical Center and GSA rental vehicles.
- Responsible for compiling all scheduled vehicles inspection providing upkeep and maintenance services and submitting monthly cost figures to invoice GSA lnteragency Motor Pool, Buffalo, N.Y. for all services and materials provided by VAWNYHS (Batavia).
- Be familiar with spraying and application techniques as well as pesticide use and other controls used in a ground maintenance management.
- Oversee contractors ensuring the safe usage of any materials being used.
- Responsible for the safe and efficient operation of all grounds and snow removal equipment, such as road sweeper, lawn sweeper, salt spreader, flail mower, Bobcats 553, 5528, and 873, power washer, and portable generators.
- Responsible for administering road tests, grading applicants, maintaining records of authorized drivers and conducting a search of the driver's background through the National Driver Request Program.
- Instructs subordinates in the safe and efficient operation of such complex equipment as pay loaders, snowplows, tractors with backhoe, front-end loader and gang-mowers.
- Responsible for all work and documentation to insure the section under his/her direction is in compliance with all regulatory agencies, including but not limited to Joint Commission, GSA, OSHA and all life safety standards.
- Creates and presents reports as required by the department and various regulatory agencies.
- Provides technical expertise and consultative advice to the Assistant Director (Batavia site manager) and the Chief of EMS.
- Comments and makes recommendations as needed to address issues with existing conditions, work assignments, costs, energy savings, and maintenance of items.
- Assigns and dispatches vehicles on a daily basis for all patient, employees and staff trips using up to 25 different vehicles.
- Investigates all accidents and makes out reports sending them to District Counsel.
- Responsible of all repairs and maintenance of all equipment, tools and motorized equipment used by the transportation and EMS section.
- Required to act in the capacity of a Service Manager in assessing mechanical failure on vehicles and equipment.
- Maintains documentation and can account for all services and materials provided by VAWNYHS/Batavia which will be billed to GSA Motor Pool, Buffalo NY.
- Assures that all vehicles and equipment are performing efficiently and that safety items such as tires, brakes, light, etc. are in proper working order.
- Responsible for the upkeep of 48.8 acres of land which consists of 36 acres of lawns to be cut and trimmed, also includes the New York State Nursing
Home.
- Responsible for the removal of debris from all walks, stairs and stairwells, the removal of all trash and debris from VAWNYHS (Batavia) grounds. The removal of ice and snow in all parking lots, walks, and stairs during the winter months is managed by the incumbent.
- Responsible for supervisory oversight which includes environmental sanitation, waste management, and basic pest functions.
- Coordinates logistical support for interior design activities, and for setups and movement for furniture/furnishings.
-Makes daily inspections of areas serviced by Aids to insure adequate coverage and proper work performance, observes quantity and quality of work performed by housekeeping staff and work leaders advising them of conditions that do not meet prescribed standards and regulatory requirements.
-Responsible for the control, use and maintenance of numerous pieces of environmental sanitation equipment such as automatic floor scrubbers, vacuums, buffers, burnishers, and carpet extractors.
- Other duties as assigned.

Work Schedule: Monday - Friday, 6:00 AM to 2:30 PM. May work evenings, weekends and holidays based on agency needs
Position Description Title/PD#: Motor Vehicle Operator Supervisor/PD095110
Relocation/Recruitment Incentives: Not authorized

• You will operate multiple types of hydraulic boon cranes to load, unload, move, and position heavy material and equipment.
• You will work from hand, radio, and other approved types of signals to position items where is there restricted maneuverability.
• You will complete operator's daily checklist to document pre and post crane inspections.
• You will use load charts to determine crane's lifting capacity in relation to the position of the boom and to compensate for variations in a crane's lifting capacity.

As a Production Controller (Scheduling), GS-1152-09, you will perform preliminary planning and long term forecasting of utilization of aerospace vehicles, engines, and associated support equipment.

Duties include but not limited to:

• Assists higher graded shop personnel in Boiler Plant operations.
• Under the direct supervision of a Maintenance Mechanic (Boiler Plant) Journeyman.
• Assists with preventative maintenance (PM), and the maintenance and repair of boilers and associated steam production equipment.
• Moves and holds heavy or awkward items and attachments; carries, lifts, and holds materials in place during operations; operates power saws, grinders, pipe threaders, drills, cutting torches, etc., for the repair or installation of equipment as instructed by a journeyman.
• Assures safety requirements and housekeeping rules are followed and that personal protective equipment are properly used.
• Performs proper safety procedures prior to working on any type of HVAC/R equipment, fan motors, fans, pumps, etc.
• Lubricates and cleans shop equipment utilizing standard procedures, tools, and cleaning and lubricating agents. - Keeps shop tools properly stored, sweeps and cleans work area, and keeps work area clean and orderly.
• Performs other related duties and functions as assigned.

MAJOR DUTIES: Receives, loads and unloads vending items for delivery to micro market locations. Drives vehicles with a gross vehicle weight of up to 26,000 pounds over public roads at highway speeds under all traffic conditions to transport merchandise. Removes aged food or other merchandise from locations, replenishes merchandise and makes appropriate notations on required documents. Monitors brands and sale prices to ensure adequate stocking levels and compliance with approved selling prices. Cleans interior and exterior of machines to ensure compliance with sanitation regulations. May be required to make limited emergency repairs to vehicle and change tires. Complies with fire, safety and security rules, regulations or orders. Loads and unloads vehicles. Verifies products are loaded and delivered against various documents for accountability.

Provides World Class Customer Service with an emphasis on courtesy. Assists customers and communicates positively in a friendly manner. Takes action to solve problems quickly. Alerts the higher-level supervisor, or proper point of contact for help when problems arise. Adheres to safety regulations and standards. Promptly reports any observed workplace hazards, and any injury, occupational illness, and/or property damage resulting from workplace mishaps to the immediate supervisor. Adheres to established standards of actively supporting the principles of the EEO program and prevention of sexual harassment.

Performs other related duties as required.
 

• Operate vehicles on and off public highways and paved roads.
• Operate a variety of diesel powered equipment.
• Operate various types of forklifts up to 50,000 pound capacity.
• Drive oversized engineer equipment which may be oversized or overweight.
• Perform operator maintenance on motorized vehicles.
• Service vehicle braking systems and lights.
• Take and prepare oil samples for the Army Oil Analysis Program.
• Recognize defective or malfunctioning parts of a motor vehicle.
• Ensure that load weights are secured and weights are properly distributed.
• Read and interpret regulations and technical publications.
• Review specifications of vehicles for load capacity.
• Receive incoming warehouse items and equipment.
• Check items for damage or serviceability.
• Prepare various documents and warehousing reports.
• Load and unload equipment on trucks for shipment.

• You will provide Product Family Manager recommendations for optimum utilization of the work force to accomplish all work on time and in accordance with set procedures and standards.
• You will coordinate overall operation and safety of assigned work centers in accordance with applicable instructions, notices, and directives.
• You will review day-to-day production status of jobs for adequate progress and/or completion.
• You will coordinate total effort involving scheduling, planning, design and material support.
• You will report at production meetings that have material, scheduling, or logistic issued and report resolution or recommendations for resolution to the Production Officer.
• You will develop and review available reports/metrics to evaluate work center performance on job accomplishments and initiates corrective actions for overall improvement of production output as required.
• You will review Quality Assurance (QA) deficiency/rejection reports to identify production shortfalls and determine and/or initiate required corrective actions.
• You will report any delays or problems that adversely affect satisfactory completion of availability or emergent work assignments to Production Officer and Product Family Manager.
• You will provide/recommend alternative means of accomplishment or repairs when required.
• You will review and provide recommendations to the Product Family Manager on manning/equipment utilization and optimization to maintain the highest level of production output.
• You will identify the programming of special tools, dies, and facility requirements for assigned work centers.
• You will manage ship repair job orders and contracts assigned by progressing and monitoring all work to anticipate, prevent, and minimize delays.
• You will resolve problems that affect the end-cost, quality, schedule, and performance of assigned availability or contract.
• You will maintain liaison with customers, ship’s force, SWRMC Waterfront Operations Maintenance Teams and the contractor for assigned projects.

Duties include but are not limited to:

• Major duties and responsibilities include but are not limited to:
• Responsible for the overall machine production in the Textile Care Processing facility (TCPF), ensuring quality and quantity of work performed meets established standards.
• Shifts available staff through work stations to meet the varying daily workload demands in production.
• Work assignments consist of soiled sorting, washing, drying, conditioning, rough dry folding, flatwork processing, uniform processing, patient personal processing, linen distribution, and the operation of all laundry machinery and equipment associated with the assigned tasks.
• Leads three (23) Operators, one(1)Sewing Machine Operator, and at least thirteen(913) Laundry Workers.
• Makes routine decisions, demonstrates proper techniques and safe practices to TCPF staff, and answers staffs' questions regarding policies, procedures and machinery/equipment operation.
• Monitors work while in progress to ensure production needs are met and proper procedures, rules and regulations are being followed.
• Confers with the TCPF Supervisor/Manager daily.to determine priorities and reports any TCPF discrepancies, malfunctions, shutdowns and concerns to the TCPF Supervisor/Manager. Incumbent assumes control of the TCPF in the absence of the Supervisor/Manager.
• Performs other duties as assigned.

• Represent management as the direct interface between Wheeler-Sack Army Airfield, the Army Field Support Battalion, and the Defense Logistics Agency representatives for all matters concerning petroleum supply and distribution requirements.
• Operate and maintain a complete mechanical fuels distribution system to include the airfield's Oasis aircraft hot refueling point.
• Verify the daily physical inventory from eight refuel tankers and five above ground storage tanks by means of tapes, bob, and petroleum detecting paste to determine the quantity of fuel on hand.
• Responsible for requesting the ordering of bulk F-24, when needed, to maintain mission readiness for Department of Defense aircraft.
• Direct the receipt and transfer of F-24 from commercial tank trucks to storage tank.
• Serves as an Airfield Hazardous Materials Representative for Waste and Contaminated Petroleum, Oils, and Lubricant with Fort Drum on hazardous materials issues.
• Operates aircraft de-icing equipment consisting of a 66,000 pounds gross vehicle weight (GVW) hi-reach with a 78-foot-high boom and a mobile high lift vehicle with a 120-foot-high boom with open bucket for large, fixed wing aircraft.

• Operate one or more conventional or computer numerical control (CNC) machines to perform a specific machining operation in the machining of castings, forgings, or other raw stocks made of various metals, metal alloys, and other materials.
• On a conventional machine, control the machine feeds and speeds, change, and use different cutting tools for successive operations, and make minor changes in machine settings to maintain sizes or shape of the work piece.
• On a CNC machine, operate in the automatic mode utilizing the feeds and speeds programmed.
• Make minor adjustments and compensations for tool and work piece size differences, as well as tool changes.
• Ensure that dimensions meet those prescribed by blueprints, sketches, or other instructions using standard measuring instruments.

• You will be responsible for the overall integration of the production effort including but not limited to, the overhaul/repair of aircraft, engines, components, accessories, support equipment nd Calibration LAB
• You will manage a comprehensive, data-driven performance measurement framework to continually evaluate the status and progress of production-related activities by participating in daily production meetings and walk-arounds.
• You will provide direction to all program supervisors and to other personnel directly assigned or identified to support the product.
• You will plan work to be accomplished based on priorities and coordinates shared capacity.
• You will ensure that decision making within the team does not sub-optimize overall FRC-SW operations.
• You will give advice, counsel or instruction to assigned personnel.

• You will review requests for construction, maintenance, repair, renovation, replacement, and other services while analyzing project data and work requirements.
• You will track and monitor the status, progress, and completion of work through the MAXIMO system.
• You will schedule projects, perform cost accounting, and track work orders for both in-house and contract execution.
• You will generate performance and metrics information by developing reports, spreadsheets, graphs, etc., relating to production.

• Operate the full range of gasoline or diesel powered vehicles.
• Perform maintenance on vehicles and equipment.
• Develop performance standards and counsel employees on performance.
• Review in-progress and completed work for adequate quantity and quality
• Identify training needs of employees and make recommendations to provide necessary training.
• Instruct subordinates in new procedures and provide advice when problems arise.
• Plan weekly and monthly work schedules.
• Establish deadlines and prioritize workload.