Total 3,388 Junior Executive manufacturing engineer job vacancies in Australia

要求：

• • 電子工程學位。
  • 馬來西亞人。
  • 必須具有至少 3 年設計或產品工程經驗。
  • 良好的產品和報廢工程工作知識。
  • Silicon Expert 具有良好的工作知識。
  • 良好的 Microsoft Office、Excel、Word、PowerPoint 工作知識。
  • 了解 REACH、RoHS、EN 50155、EN 50121-3-2、EN 61373、EN 60068、EN 45545-2 標準是一項額外優勢。
  • 了解產品生命週期管理是一個額外的優勢。
  • 具有獨立判斷力和解決問題的創造力。

職位描述：

• • 對 STE 鐵路產品進行過時監控並產生報告。
  • 負責維護鐵路產品的產品規格。
  • 開發和維護專案的產品文件。
  • 負責維護產品生命週期記錄。
  • 開發和維護經驗教訓的知識資料庫。
  • 使用專業知識/比較表搜尋替代標準元件。
  • 進行數據表比較。

津貼和福利

• 津貼（旅費、交通費等）
• 醫療保險
• 事假
• 個人發展機會
• 有薪培訓和發展

CORE RESPONSIBILITY

1. Supervises staff to include hiring, training, evaluating performance, providing compensation recommendations, and determining disciplinary actions when necessary.

2. Supervises function of the batch process that typically involves a single or less complex product line(s), ensures resources and personnel are available and allocated to meet operational demand, responds to employee and management questions and concerns, and monitors safety & quality aspects during batch processing.

3. Develops, analyzes and reviews a variety of operational reports within the function(s) to improve quality, efficiency, cycle times, and volumes, and implements operational changes as required.

4. Develops operating policies and procedures to ensure the efficient use of resources, maintain a safe environment, and produce quality products.

5. Ensures production schedules, quality initiatives, safety targets, efficiency metrics, and other operational measurements are met for the function(s).

6. Ensures compliance with department policies and procedures and applicable laws, rules, and regulations.

7. Works with Filling supervisors, Warehouse Supervisors, maintenance or management to review production quality, safety, and other operations, implement department activities, and solve operational problems.

8. Assists with reviewing and coordinating general plant operations with shipping, scheduling, inventory management, and sales activities by reviewing reports and operations and other information as required or directed.

9. May read batch ticket or other production information, ensure container are correct, and physically load Finished good according to the batch ticket and steps.

10. May monitor batch processing instruments, equipment, and schedules to ensure product is filled according to specifications.

11. Performs other duties as assigned.

Perks & Benefits

• Allowance (travel stipends, transportation, etc.)
• Medical insurance
• Personal leave
• Personal development opportunities

崗位職責

• 準備和管理招標文件，包括技術建議和方法說明
• 利用 AutoCAD 和其他文件軟體進行專案規劃和設計
• 進行現場檢查並監督品質保證和控制 (QAQC) 流程
• 在招標過程中應用對建築機械和設備的基本了解

要求

• 土木工程或建築管理學士學位
• 至少 5 年現場實務經驗，重點關注基礎設施項目，包括高速公路、橋樑或港口
• 熟練使用AutoCAD和其他相關文件軟體
• 能夠在快節奏的環境中獨立工作並作為團隊的一部分
• 必須能夠用國語讀寫

優先選擇中國候選人

津貼和福利

• 醫療的
• 公積金
• 索斯科

核心責任

1. 監督員工，包括招募、訓練、評估績效、提供薪資建議，並在必要時確定紀律處分。

2. 監督通常涉及單一或不太複雜的產品線的批次流程的功能，確保資源和人員可用並分配以滿足營運需求，響應員工和管理層的問題和擔憂，並監控安全和品質方面在批處理過程中。

3. 制定、分析和審查職能範圍內的各種營運報告，以提高品質、效率、週期時間和數量，並根據需要實施營運變更。

4. 制定營運政策和程序，以確保資源的有效利用，維護安全的環境，並生產優質的產品。

5. 確保滿足職能部門的生產計畫、品質計畫、安全目標、效率指標和其他營運衡量標準。

6. 確保遵守部門政策和程序以及適用的法律、規則和法規。

7. 與灌裝主管、倉庫主管、維修或管理人員一起審查生產品質、安全等操作，執行部門活動，解決操作問題。

8. 根據要求或指示審查報告和運營以及其他信息，協助審查和協調一般工廠運營與運輸、調度、庫存管理和銷售活動。

9. 可讀取批票或其他生產訊息，確保容器正確，並依照批票和步驟實際裝載成品。

10. 可以監控批量加工儀器、設備和時間表，以確保產品按照規格進行填充。

11. 履行指派的其他職責。

津貼和福利

• 津貼（旅費、交通費等）
• 醫療保險
• 事假
• 個人發展機會

Job Description

・Responsible for customer service after the sale by Sales.

・Performs general maintenance, repair, and troubleshooting of electron microscopes.

・Performs initial installation of products when they are purchased.

・Visit customers to check status and troubleshoot problems

・Conduct product training, demonstration and technical advice to customers.

・Possible to go to Singapore during training (only once every 3-4 years)

・The coverage area is all over Malaysia (mainly Penang area)

・Most clients are Japanese companies (University, semiconductor company related)

・There are no opportunity to drink alcohol with clients

・Visit clients about 4 days in a week

・During Office day, they reply emails, prepare PO etc

Requirements

・Be able to read electric circuit.

・Able to work in Penang in the future (first 2-3 years in KL, will be stationed in Penang after).

・Knowledge for E & E.

・Be able to travel very frequently.

・Possess own car.

Additional Information:

Company Industry: Semicon Manufacturing

Working Location: Kelana Jaya, Petaling Jaya

Working hours: Monday - Friday 9am - 5:30pm

Click on "APPLY NOW”, if you are interest in this position.

＊For those who shortlisted will be contacted. Thank you for your application!!!

・Car Allowance：RM 800

・Trip Allowance：(stay night) RM 80 / day

(day trip) RM 60 / day

・Gas, transport, Toll ：All Claimable

・Over Time claim：RM40/h (but, rarely)

・Bonus Average 4 months

・Salary increment

*More info to be disclosed once shortlisted

職位描述

・銷售負責售後客戶服務。

・進行電子顯微鏡的一般維護、修理和故障排除。

・購買產品時進行初始安裝。

・拜訪客戶檢查狀態並解決問題

・對客戶進行產品培訓、展示和技術諮詢。

・訓練期間可前往新加坡（每3-4年一次）

・覆蓋範圍全馬（主要是檳城地區）

・大多數客戶是日本公司（大學、半導體公司相關）

・沒有機會與顧客喝酒

・每週約4天拜訪客戶

・辦公日期間，回覆郵件、準備採購訂單等

要求

・能夠讀懂電路。

・未來可以在檳城工作（前2-3年在吉隆坡，之後駐紮檳城）。

・電機與電氣知識。

・能夠經常出差。

・擁有自己的汽車。

附加資訊：

公司業：半導體製造

工作地點： 八打靈再也 Kelana Jaya

工作時間：週一至週五上午 9 點至下午 5:30

如果您對此職位感興趣，請點擊「立即申請」。

＊入圍者將另行聯絡。感謝您的申請！

・汽車津貼：RM 800

・行程津貼：(住宿過夜) RM 80 / 天

(一日遊) RM 60 / 天

・煤氣、交通、通行費：均可索賠

・超時索賠：RM40/小時（但是很少）

・獎金平均4個月

・加薪

*更多資訊將在入圍後披露

• Little to no experience required
• Up to $3500/month
• 5 days work week
• Allowance + incentives + bonus
• Friendly working culture

Responsibilities:

• Design and implement manufacturing processes aligned with company goals.
• Collaborate on production line layouts.
• Maintain and optimize production standards.
• Deploy processes, train teams, and perform risk assessments.
• Drive improvement projects to meet compliance.
• Support digitalization and smart factory efforts.

Requirements:

• 2+ years in Lean Improvement, Engineering, or Manufacturing preferred.
• Diploma in Mechanical or Electrical Engineering preferred.
• Relevant studies accepted even without experience.
• Proficient in MS Office, CAD, and SAP.

If interested, click apply or please wa.me/6598438083 with your

• Full name
• Copy of your resume

Key Responsibilities:

• Assist in evaluating manufacturing processes by supporting research programs, applying knowledge of product design and materials, and collaborating with operators and vendors.
• Help design and develop manufacturing processes for new products and enhancements, including related tooling and fixtures.
• Support process troubleshooting and refinements to improve product throughput and assembly techniques.
• Contribute to improving manufacturing efficiency by analyzing workflow, space requirements, and equipment layout.
• Participate in process qualifications and validations, including equipment qualifications and material specifications.
• Assist in ensuring product and process quality by supporting the design of testing methods and confirming manufacturing processes.
• Provide manufacturing decision-making information by assisting in calculations of production, labor, and material costs, and reviewing production schedules.
• Help prepare product and process reports by collecting, analyzing, and summarizing information and trends.
• Assist in keeping equipment operational by coordinating maintenance and repair services, following manufacturer’s instructions and procedures.
• Support Health & Safety initiatives in assigned areas, including accident investigation and corrective actions.
• Research state-of-the-art process technologies and evaluate their potential benefits.
• Participate in Validation Activities as directed.
• Assist in maintaining compliance with ISO 13485, GMP, and FDA regulations.

Education/Experience and Qualifications:

• Bachelor’s degree in Engineering or a similar technical field.
• Up to 2 years of experience in a high-volume production environment; experience in medical device manufacturing, particularly catheter production, is a plus.
• Strong interpersonal skills with the ability to communicate effectively at all levels within the company.
• Basic understanding of DOE and statistical techniques.
• Familiarity with process capabilities and control charting is preferred.
• Exposure to writing protocols for validations and qualifications, including FMEA and IQ/OQ documentation.
• Awareness of GMPs, ISO 9001, ISO 13485, and Medical Device Directives.
• Self-motivated and eager to drive change and innovation. Must be comfortable working in a fast-paced environment with minimal supervision.

Primary Responsibilities:

• Identify and solve engineering problems as needed
• Support manufacturing/assembly process improvement
• Responsible to uphold electrical safety standards and ensure regulatory compliance

Job Descriptions:

• Prepare and update process check sheets and manuals
• Troubleshoot technical issues and optimize system performance as needed
• Provide technical guidance and mentor Technicians
• Conduct and prepare root analysis and part defect report
• Work with Internal parties and vendor to prevent recurrence
• Liaise with R&D department for engineering change request
• Pre-inspection/inspection on MTC’s Quality Issues
• Prepare electrical inspection test sheet for test and measurement
• Evaluate and implement corrective measure on test result
• Ensure adherence to design specifications, quality standards, and safety protocols
• To carry out or perform tasks / activities, prepare and submit necessary reports to Superior from time to time

Job Requirements:

• Diploma in Electrical Engineering or equivalent
• Good interpersonal and communication skills

Summary:

• Attractive Remuneration Package
• NO Experience are welcome to apply!
• Company with great career prospect and environment

Job Scope:

• Check on mechanical/electrical device and make sure device is in normal operation
• Perform periodic maintenance and corrective maintenance
• Perform mechanical/electrical device system upgrade
• Attend to complaint by customer and rectify fault
• Provide professional advice to customer about product
• Create maintenance/fault report for every rectification
• Report fault to reporting manager
• Other duties assigned

Requirements:

• Min. Nitec in Mechanical/Electrical/Mechatronics or equivalent
• Candidates with Electrical/Mechanical/Mechatronics experience will be an advantage
• Comfortable to work shift / standby when required
• Comfortable to work on weekends when required

To Apply, kindly click on the "APPLY NOW" button

We regret that only shortlisted candidates will be notified.

StaffKing Pte Ltd (20C0358) | Trance Teu (R1988522)

Our client is a Manufacturing MNC. Due to their current expansion plan, they are looking for a Engineering Assistant to join their team, in hopes of developing the current high performing team. They are located in the West.

Job Responsibilities

• Assist Engineers and Managers with assigned tasks.
• Collaborate with Engineers and Operators to support product design, testing, and process improvements.
• Conduct equipment inspections and coordinate maintenance.
• Manage inventory discrepancies and handle material orders.
• Ensure products and processes comply with quality assurance standards.
• Calibrate and troubleshoot equipment as needed.
• Any other duties as assigned.

Requirements

• Minimum Diploma in Engineering related studies or equivalent
• Minimum 1 year relevant experience
• Proficient in Microsoft Office application

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email: jobs@recruitpedia.sg

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R23115553 (Lai Hor Yan)

Our client is a Manufacturing MNC. Due to their current expansion plan, they are looking for a Engineering Assistant to join their team, in hopes of developing the current high performing team. They are located in the West.

Job Responsibilities

• Assist Engineers and Managers with assigned tasks.
• Collaborate with Engineers and Operators to support product design, testing, and process improvements.
• Conduct equipment inspections and coordinate maintenance.
• Manage inventory discrepancies and handle material orders.
• Ensure products and processes comply with quality assurance standards.
• Calibrate and troubleshoot equipment as needed.
• Any other duties as assigned.

Requirements

• Minimum Diploma in Engineering related studies or equivalent
• Minimum 1 year relevant experience
• Proficient in Microsoft Office application

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email: jobs@recruitpedia.sg

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R23115553 (Lai Hor Yan)

Our client is a Manufacturing MNC. Due to their current expansion plan, they are looking for a Engineering Assistant to join their team, in hopes of developing the current high performing team. They are located in the West.

Job Responsibilities

• Assist Engineers and Managers with assigned tasks.
• Collaborate with Engineers and Operators to support product design, testing, and process improvements.
• Conduct equipment inspections and coordinate maintenance.
• Manage inventory discrepancies and handle material orders.
• Ensure products and processes comply with quality assurance standards.
• Calibrate and troubleshoot equipment as needed.
• Any other duties as assigned.

Requirements

• Minimum Diploma in Engineering related studies or equivalent
• Minimum 1 year relevant experience
• Proficient in Microsoft Office application

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email: jobs@recruitpedia.sg

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R23115553 (Lai Hor Yan)

Our client is a Manufacturing MNC. Due to their current expansion plan, they are looking for a Engineering Assistant to join their team, in hopes of developing the current high performing team. They are located in the West.

Job Responsibilities

• Assist Engineers and Managers with assigned tasks.
• Collaborate with Engineers and Operators to support product design, testing, and process improvements.
• Conduct equipment inspections and coordinate maintenance.
• Manage inventory discrepancies and handle material orders.
• Ensure products and processes comply with quality assurance standards.
• Calibrate and troubleshoot equipment as needed.
• Any other duties as assigned.

Requirements

• Minimum Diploma in Engineering related studies or equivalent
• Minimum 1 year relevant experience
• Proficient in Microsoft Office application

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email: jobs@recruitpedia.sg

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R23115553 (Lai Hor Yan)

Position: Purchasing Assistant

• Location: Woodlands Link
• Working Day: Mon to Fri (830am to 530pm)
• Salary: $2400 - $2800

Requirements:

• Possesed Certificate in Logistics/Supply Chain Management or equivalent
• Min 1 year in food manufacturing environment

Job Tasks:

1. Create a Purchase Order
2. Keep track of orders to ensure timely delivery
3. Coordinate with internal divisions to ensure the quantity and quality of received items
4. Verify vendor’s invoice with purchase order and delivery order
5. Discuss product quality concerns and any other inconsistencies with suppliers.
6. Monitor warehouse stock inventory level to ensure sufficient stock available
7. Maintain updated records of suppliers, goods, costs, and lead times.
8. Communicate with suppliers on documentation like (MSDS, product spec, etc.)
9. Conduct a weekly inventory check
10. Participate in the Annual Stocktake
11. Any ad hoc duties assigned by the Superior

Chin Wai Loon Reg No: R24121618

The Supreme Hr Advisory Pte Ltd EA No: 14C7279