Total 67 Transportation / Logistics job vacancies in Des Plaines, Illinois

Provides first line supervision to a team of Developmental and Certified Professional Controllers. Supervises a staff of Air Traffic Control Specialists that is responsible for carrying out air traffic control assignments within a geographic area.

Plans and assigns work to be accomplished by subordinate employees. Sets work priorities and schedules. Approves leave; gives advice, counsel, and instruction to employees on both work and administrative matters. Evaluates performance of employees and recommends performance ratings. Hears and resolves complaints from employees and refers group grievances and more serious unresolved complaints to a higher level manager. Identifies and arranges for developmental and other training needs of employees. Finds ways to improve production or increase the quality of the work directed. Adjusts staffing levels and work procedures to accommodate resource decisions made at higher levels. Recommends goals and objectives for the area and tracks accomplishments.

Communicates and reinforces diversity and EEO policies and programs in all areas of responsibility, including selections, training, and transfers. Supports and participates in the labor management partnership process, and fosters a work environment where all employees are treated in a fair and equitable manner.

Performance is evaluated upon the effectiveness with which assigned program objectives are achieved.

The MVO drives gasoline or diesel-powered vehicle weights up to and over 26,000 pounds. The vehicle types include passenger cars, vans, station wagons, cargo van, stake trucks, bus, various capacities up to a 40-passenger bus (similar to a school bus). The vehicles are used for transporting patients and personnel on official business and for delivery of supplies and materials on and off the station. Vehicles are driven interstate, over roads and streets, through all kinds of traffic and weather conditions.

Duties Include:
-Perform duties over pre-determined routes and in accordance with a pre-determined schedule, over public roads at highway speeds.
-Operates doors and wheelchair lift to allow veterans and staff to enter and leave the bus.
-Assists nursing service personnel with loading and unloading of patients in wheelchairs.
-Ensures that patients and cargo are properly secured.
-Maneuvers cars, vans, and trucks in close quarters and in heavy traffic on both Interstate highways and local roads.
-Uses caution when backing to load or unload at loading docks, ramps or similar locations.
-Drives vehicle in a safe manner and complying with all vehicle traffic laws.
-Performs maintenance duties such as checking tires and tire pressure, battery condition, cooling system level, oil level, fuel level, power steering fluid and brake fluid levels, all lights, and checks for and report any physical damage before use of vehicles.
-Checks hydraulic fluid and performs air filter changes as appropriate.
-Reports motor vehicle accident and completes require reports.
-Maintains utilization records for all GSA and VA owned passenger and truck vehicles.
-Documents service or repairs, maintenance and inspections.
-Keeps vehicle clean (internal and exterior).
-Performs other related duties as assigned.

NOTE: Selected candidates will be required to pass a basic first aid and cardiopulmonary resuscitation (CPR) course at the VA prior to transporting patients.

Work Schedule: Various - will be discussed at interview.
Position Description Title/PD#: Motor Vehicle Operator, PD 99793-S
Relocation/Recruitment Incentives: Not authorized

As a TRAFFIC MANAGEMENT SPECIALIST at the GS-2130-12 some of your typical work assignments may include:

• Serve as a Traffic Management Specialist, and Alternate Lead Contracting Officer Representative (COR) in the Personal Property Directorate.
• Facilitate development and implementation of new programs, evaluation of existing programs, and execution of operational activities to maintain integrity of movement and storage systems.
• Conduct studies involving research and development of new systems or methods of improving existing systems for movement and storage of personal property during adverse situations where operational barriers such as bankruptcy, agency refusal to move shipments to destination, fire, natural disasters, and strikes exist.
• Facilitate and develop changes to policy, procedures, and governing directives for coordination with DoD components, the Prime Contractor, and other interested parties.
• Perform financial analyses and evaluation of programs, which ensures the Prime Contractor can provide service to the DoD; identify and evaluate the impact of internal and external changes on the operating performance and viability of the Prime Contractor.

As a GENERAL SUPPLY SPECIALIST (Title 32), GS-2001-9, you will provide centralized oversight of critical squadron programs. Measure LRS processes through inventory analysis, surveillance, trends and standards, develop and write local policy/procedures and perform over the shoulder inspections. Also responsible for all funds management functions including satellite stock fund management in support of unit mission.

Major Duties - This is NOT an all-inclusive list:

• Researches and develops checklists and exercises internal management controls.
• Draft and finalize operating instructions, which include but are not limited to, alert plans, duty hour, and designation of delivery locations.
• Develop and maintain a schedule for regular and/or periodic surveillance visits to all elements.
• Utilize computer software programs, spreadsheets, databases and graphics to collect, organize, analyze, display, and/or brief management information to customers and/or squadron management staff.
• Develop and maintain trend analysis for stock fund operations and formulates long and short-range projections.
• Maintain and monitor files and listings associated with organization effectiveness and corrects data to ensure accurate calculations of future year funding and flying hour program.
• Perform analysis on a wide range of technical squadron functions by analyzing historical and current data and identifying deficiencies or potential problems.
• Evaluate unexpected fluctuations or trends in statistics, resolves discrepancies, and makes recommendations for change when problems are identified that adversely affect operations.
• Provide a detailed written report of inspection to include procedural clarification to eliminate non-compliance.
• Document findings for problems that can not be resolved and forwards compiled data to higher echelons for study and resolution

• Responsible for negotiating and preparing CONUS surface movement tenders for critical cargo in support of numerous Department of Defense (DOD) installations and contractors.
• Maintains direct contact with all Installation Transportation Officers, Division Transportation Officers, and Service Representatives at over 1,200 DOD facilities and their higher headquarters to resolve negotiating and movement issues.
• Works with major DOD shippers in developing and refining specifications for a variety of highly visible and often unique transportation requirements.
• Coordinates awards with Service/Agency headquarters, shippers, and requestors.
• Represents the Command and maintains liaison with a wide range of internal and external stakeholders to support customer requirements for intermodal surface transportation services.
• Meets customers and service providers and hosts conferences, workshops and meetings to address operational/systemic issues and develops improvement programs and initiatives.

Works closely with medical officers to assure the following: (1) medical certifications are only issued to medically qualified airmen, (2) ATCS/ATVS applicant physical exams meet program requirements, (3) an appropriate number of qualified physicians are selected, designated and trained as AMEs to conduct FAA medical examinations of civil airmen, (4) AME site visits and quality assurance reviews are conducted and (5) All phases of the Department of Transportation (DOT) drug and alcohol testing program, including pre-employments/pre-appointment, random, follow-up, reasonable suspicion, and post-accident testing are coordinated. This position may require travel in support of these program areas.

Conducts analysis in the review and evaluation of program activities. These analyses are conducted to ensure proper program integration and conformance to policy, completeness, and adequacy of operation in meeting goals and objectives. Prepares recommendations based on such reviews and discusses recommended courses of action with program managers to resolve major program areas. Reviews and analyzes draft polices and manual chapters and provides feedback to the appropriate individual. Responsibilities may involve providing advice and support to management personnel for best utilization and reprogramming of resources and conducting cost versus benefit analysis.

Additional duties may include conducting office administrative functions, scheduling exams, and assisting the medical officer in performing ancillary testing for medical examinations and chaperon functions during examinations.

Complies with all Quality Management System (ISO-9001) requirements.

FV-F DUTIES:

Performs basic but progressively more difficult assignments and applies knowledge applicable to programs with the Aerospace Medicine Division to plan and accomplish assignments. Acts as a member of a team within a defined area of responsibly. Typical assignments include collecting and recording data/information; conducting research; identifying problems; and assisting higher-level professionals in day-to-day operations of regional programs.

Established policies/procedures provide detailed guidance for almost all assignments, with little or no room for discretion. Works under instructions provided by a manager, project/program manager, team leader or more experienced professional. Refers problems and work issues to a manager, project/program manager, team leader or more experienced professional for guidance.

Work is reviewed regularly during assignments and at completion to ensure timeliness and all aspects of quality. Work activities typically support the work of other employees and contribute to activities of the organizational level.

FV-G DUTIES:

Performs a combination of routine, multiple and varying assignments under the general direction of the manager, project/program manager, team leader or more experienced professional. Acts as an individual contributor and/or member of a team for project/programs within a defined area of responsibility.

Applies experience and detailed knowledge applicable to programs within the Aerospace Medicine Division to plan and accomplish assignments. Typical assignments may include: collecting and analyzing data/information; conducting research; applying policies and procedures; identifying problems; and working with higher-level and lower-level professionals in day-to-day operations in one or more regional programs.

Established policies/procedures provide guidance for most assignments but allow some discretion to select the most appropriate approach.

Work is typically reviewed frequently during assignments and at completion to ensure timeliness policy compliance and alignment with the requirements of the project or other work activity. Work activities typically support activities of the organizational unit and may affect project/program objectives for the major subdivision and the Line of Business (LOB)/Staff Office (SO).

Performs other duties as assigned.

Works closely with medical officers to assure the following: (1) medical certifications are only issued to medically qualified airmen, (2) ATCS/ATCS Applicant physical exams meet program requirements, (3) an appropriate number of qualified physicians are selected, designated and trained as AMEs to conduct FAA medical examinations of civil airmen, (4) AME site visits and quality assurance reviews are conducted and (5) All phases of the Department of Transportation (DOT) drug and alcohol testing program, including pre-employments/pre-appointment, random, follow-up, reasonable suspicion, and post-accident testing are coordinated. This position may require travel in support of these program areas.

Conducts analysis in the review and evaluation of program activities. These analyses are conducted to ensure proper program integration and conformance to policy, completeness, and adequacy of operation in meeting goals and objectives. Prepares recommendations based on such reviews and discusses recommended courses of action with program managers to resolve major program areas. Reviews and analyzes draft polices and manual chapters and provides feedback to the appropriate individual. Responsibilities may involve providing advice and support to management personnel for best utilization and reprogramming of resources and conducting cost versus benefit analysis.

Additional duties may include conducting office administrative functions, scheduling exams, and assisting the medical officer in performing ancillary testing for medical examinations and chaperon functions during examinations.

Complies with all Quality Management System (ISO-9001) requirements.

FV-F DUTIES:

Performs basic but progressively more difficult assignments and applies knowledge applicable to programs with the Aerospace Medicine Division to plan and accomplish assignments. Acts as a member of a team within a defined area of responsibly. Typical assignments include collecting and recording data/information; conducting research; identifying problems; and assisting higher-level professionals in day-to-day operations of regional programs.

Established policies/procedures provide detailed guidance for almost all assignments, with little or no room for discretion. Works under instructions provided by a manager, project/program manager, team leader or more experienced professional. Refers problems and work issues to a manager, project/program manager, team leader or more experienced professional for guidance.

Work is reviewed regularly during assignments and at completion to ensure timeliness and all aspects of quality. Work activities typically support the work of other employees and contribute to activities of the organizational level.

FV-G DUTIES:

Performs a combination of routine, multiple and varying assignments under the general direction of the manager, project/program manager, team leader or more experienced professional. Acts as an individual contributor and/or member of a team for project/programs within a defined area of responsibility.

Applies experience and detailed knowledge applicable to programs within the Aerospace Medicine Division to plan and accomplish assignments. Typical assignments may include: collecting and analyzing data/information; conducting research; applying policies and procedures; identifying problems; and working with higher-level and lower-level professionals in day-to-day operations in one or more regional programs.

Established policies/procedures provide guidance for most assignments but allow some discretion to select the most appropriate approach.

Work is typically reviewed frequently during assignments and at completion to ensure timeliness policy compliance and alignment with the requirements of the project or other work activity. Work activities typically support activities of the organizational unit and may affect project/program objectives for the major subdivision and the Line of Business (LOB)/Staff Office (SO).

Performs other duties as assigned.

The VA Midwest Health Care Network advocates for a Whole Health System of care in each of the Medical Centers. This is an approach to healthcare that empowers and equips people to take charge of their health and well-being and live their lives to the fullest. As an employee operating in a Whole Health System of care, you will operate in a model with three core elements, seeking to create a personalized health plan for each Veteran. This is done in the context of healing relationships and healing environments and a connection back to the Veteran's community. This aligns with the Veterans Health Administration (VHA) Mission Statement to Honor America's Veterans by providing exceptional health care that improves their health and well-being.

Major duties include but are not limited to:

• Provide sterilization, preparation, supply items and decontamination support for the medical center. The term "supply item" as used refers to reusable items for patient care including instrumentation (scissors, forceps, retractors, etc.), surgical trays and sets and various
  other items that could be processed or assembled through the Preparation and Decontamination areas of Sterile Processing Service.
• Complete training coursework and VA SPS certification as required for a Sterile Processing Technician position in the VA.
• Maintain certification by completing approved, annual Continuing Education Units (CEU) and annual in-service hours.
• Work as a team member with other Medical Supply Technicians of various experience to carry out the daily work utilizing the written standard operating procedures and/or manufacturers written instructions in accordance with instructions, policies, previous training, or
  accepted/standard practices.
• Disassembles the RME and determines the correct cleaning method, such as but not limited to ultrasonic cleaners, mechanical washers, and chemical cleaning/decontamination agents as determined by manufactures instructions.
• Inspects, prepares, assembles and determines the correct method and packaging for sterilization or high level disinfection, such as but not limited to steam, hydrogen peroxide, and automated endoscope reprocessors.
• Removes soil, blood, tissue fragments, body fluids and other contaminants by wiping, soaking, rinsing and scrubbing.
• Inspects packages for indications of proper sterilization, assembles basic sets and trays used throughout the medical center, including those used in the operating room.
• Performs segments of work pertaining to the decontamination, sterilization and inspection of reusable medical equipment (RME).
• Performs and documents daily operational checks and records for all sterilization equipment.
• Applies the Joint Commission, Occupational Safety and Health Administration and Federal Drug Administration standards as they pertain to sterile processing and the distribution of reusable medical equipment.
• Meets the needs of customers while supporting VA missions.

The VA Midwest Health Care Network advocates for a Whole Health System of care in each of the Medical Centers. This is an approach to healthcare that empowers and equips people to take charge of their health and well-being and live their lives to the fullest. As an employee operating in a Whole Health System of care, you will operate in a model with three core elements, seeking to create a personalized health plan for each Veteran. This is done in the context of healing relationships and healing environments and a connection back to the Veteran's community. This aligns with the Veterans Health Administration (VHA) Mission Statement to Honor America's Veterans by providing exceptional health care that improves their health and well-being.

Major duties include but are not limited to:

• Provide sterilization, preparation, supply items and decontamination support for the medical center. The term "supply item" as used refers to reusable items for patient care including instrumentation (scissors, forceps, retractors, etc.), surgical trays and sets and variousother items that could be processed or assembled through the Preparation and Decontamination areas of Sterile Processing Service.
• Complete training coursework and VA SPS certification as required for a Sterile Processing Technician position in the VA.
• Maintain certification by completing approved, annual Continuing Education Units (CEU) and annual in-service hours.
• Work as a team member with other Medical Supply Technicians of various experience to carry out the daily work utilizing the written standard operating procedures and/or manufacturers written instructions in accordance with instructions, policies, previous training, oraccepted/standard practices.
• Disassembles the RME and determines the correct cleaning method, such as but not limited to ultrasonic cleaners, mechanical washers, and chemical cleaning/decontamination agents as determined by manufactures instructions.
• Inspects, prepares, assembles and determines the correct method and packaging for sterilization or high level disinfection such as but not limited to steam, hydrogen peroxide, and automated endoscope reprocessors.
• Removes soil, blood, tissue fragments, body fluids and other contaminants by wiping, soaking, rinsing and scrubbing.
• Inspects packages for indications of proper sterilization, assembles basic sets and trays used throughout the medical center, including those used in the operating room.
• Performs segments of work pertaining to the decontamination, sterilization and inspection of reusable medical equipment (RME).
• Performs and documents daily operational checks and records for all sterilization equipment.
• Applies the Joint Commission, Occupational Safety and Health Administration and Federal Drug Administration standards as they pertain to sterile processing and the distribution of reusable medical equipment.
• Meets the needs of customers while supporting VA missions.

Technician contributes to the organization as a construction team member for projects that may have direct or indirect impact on air traffic control operations.

Work is completed using various general and specialized trade skills, including but not limited to: electrical, carpentry, metal and composite roofing, concrete, plumbing, welding, dry wall, chain and link iron fencing, painting, masonry, gasoline and diesel mechanic, HVAC, heavy equipment maintenance, operations of heavy machinery, and commercial vehicles.

Technician is responsible for developing cost estimates for various projects, gathering technical data, evaluating/formulating safety procedures, determining man power, and material and fiscal requirements for assigned projects.

The technician uses technical manuals, manufacturers instructions, FAA procedures and other available publications as guidance for completing assignments. Possesses a working knowledge of the laws and policies and procedures pertaining to the construction work environment (I.e. OSHA, facility, system and equipment security, environmental compliance assessment protocol (ECAP), and national electrical code (NEC).

Technician applies electrical , mechanical, structural, and civil engineering technical skills in diagnosing, adjusting, modifying, testing, overhauling, demolishing, installing, repairing and servicing plant and structure systems, equipment and component parts.

Technician shall be called upon to provide training to developmental technicians. Technician applies experience and detailed technical construction knowledge in order to plan and complete assignments in support National airspace systems (NAS).

Technician shall have the ability to converse with a variety of contacts to successfully complete an assigned project. contacts include but are not limited to direct personnel, managers, airport authorities, material and equipment suppliers, as well as other FMP technicians from other areas of the US.

Technician contributes to the organization as a construction team member for projects that may have direct or indirect impact on air traffic control operations.

Work is completed using various general and specialized trade skills, including but not limited to: electrical, carpentry, metal and composite roofing, concrete, plumbing, welding, dry wall, chain and link iron fencing, painting, masonry, gasoline and diesel mechanic, HVAC, heavy equipment maintenance, operations of heavy machinery, and commercial vehicles.

Technician is responsible for developing cost estimates for various projects, gathering technical data, evaluating/formulating safety procedures, determining man power, and material and fiscal requirements for assigned projects.

The technician uses technical manuals, manufacturers instructions, FAA procedures and other available publications as guidance for completing assignments. possesses a working knowledge of the laws and policies and procedures pertaining to the construction work environment I.e. OSHA, facility, system and equipment security, environmental compliance assessment protocol (ECAP), and national electrical code (NEC).

Technician applies electrical, mechanical, structural, and civil engineering technical skills in diagnosing, adjusting, modifying, testing, overhauling, demolishing, installing, repairing and servicing plant and structure systems, equipment and component parts.

Technician shall be called upon to provide training to developmental technicians. Technician applies experience and detailed technical construction knowledge in order to plan and complete assignments in support National airspace systems (NAS).

Technician shall have the ability to converse with a variety of contacts to successfully complete an assigned project. contacts include but are not limited to direct personnel, managers, airport authorities, material and equipment suppliers, as well as other FMP technicians from other areas of the US.

This Supervisory Training Specialist position is located at Chicago Midway Airport (MDW), Transportation Security Administration, Department of Homeland Security (DHS). If selected for this position, you will serve as a liaison concerning training matters between the Federal Security Director (FSD) and TSA Headquarters, including the Office of Training and Development (OTD) and the Headquarters Aviation Programs Office. As a Supervisory Training Specialist, you will supervise employees performing training work, manage projects within assigned resources, and resolve routine problems that impact the objectives of the organization unit. Typical duties include, but are not limited to:

• Assisting in the planning, directing, scheduling, and evaluation and integration of training and professional development products and services with the airport environment. Promoting the availability of these products and services to the workforce in accordance with the OTD's strategic training direction.
• Serving as a resource to the Federal Security Director management staff with regard to coordinating plans, programs, standards and procedures governing airport-wide training, career development, screener recertification, and screener performance improvement programs and activities.
• Providing advice and guidance to the FSD management staff pertinent to the training needs and workforce performance improvement programs generated in support of the airport functions.
• Assisting with briefings for senior-level management and staff on training and development issues. Ensuring that training products respond to TSA goals and objectives.
• Documenting training activities and accomplishments and ensuring the currency of training database and materials. Assisting in managing instructors.
• Scheduling new hire training.
• Acting as a TSA Approved Instructor (TAI) or Test Administrator.

• Gives advice, counsel, or instruction to employees on both work and administrative matters.
• Hears and resolves employee complaints, referring group grievances of more serious complaints to the Division Chief.
• Serves as the on-site senior transportation manager and technical authority for DTTS operations.
• Provides technical advisory services and is the Operations authority in meetings with DOD organizations or other domestic and foreign organizations associated with the Defense Transportation Tracking System DTTS Program.
• Within the division, the incumbent is responsible for formulating overall traffic management policies, establishing operating requirements, evaluating plans and programs, and maintaining operations.
• The incumbent will organize and maintain the records management system, manage supply inventories, and act as the section Defense Transportation System technical representative.

As a CYBERSPACE STRATEGIC ANALYST at the GS-0301-13 some of your typical work assignments may include:

• Conducts analysis in conjunction with other members of cyberspace operations identifying mission risk from cyberspace threats and vulnerabilities.
• Executes current and explores new and innovative methods to identify/protect Defense Critical Infrastructure (DCI) Mission Relevant Terrain in Cyberspace (MRT-C) and Key Terrain in Cyberspace (KT-C) data to support risk management activities and counter advisory attempts to exploit and/or attack USTRANSCOM networks.
• Represents the Command and J3 for cyber domain mission assurance and applicable mission assurance related programs and activities.
• Serves as action officer for USTRANSCOM participation in OSD-led Mission Assurance Coordination Board activities to include Senior and Executive Steering Groups, Integrated Assessment Schedule (IAS) and Mission Assurance Assessments (MAA).

Performs multiple, varying and complex assignments under the minimal direction of a manager, project/program manager, team leader or more experienced technical specialist. Serves as technical specialist with full responsibility for planning, sequencing, directing, and evaluating assigned projects related to the National Airspace System (NAS). Acts as principal technical specialist or as project manager or team leader for large work activities. Serves as the advisor to the OSG Team Manager for activities of large-projects.

Applies experience and comprehensive technical knowledge applicable to his/her discipline, as well as an understanding of new technologies and methodologies, to solve complex problems and develop improved technical processes or systems. Provides technical direction and oversight for large-project implementation such as Optimization of Airspace and Procedures in the Metroplex (OAPM). Assures that activities are efficiently carried out and that program objectives are being effectively accomplished. Accomplishes regional airspace and airport space analysis (AAA) studies to determine proposal's effect on the NAS. Recommends and qualifies airports for development, amendment, and cancellation of instrument approach procedures. Applies knowledge of specific Terminal/EnRoute lnstrument Flight Procedures (TERPS).

Applies knowledge of FAA's policies and objectives to identify, define and organize work for multiple work activities. May be required to perform duties as they relate to one or more of the following program areas: Design, development and maintenance of lnstrument Flight Procedures (lFPs) and related publications; Coordination and integration of lFPs in the NAS; Collection and verification of aeronautical data. Performs tasks associated with making and providing IFP Feasibility Determinations.

Contacts are internal and external. Often represents FAA as a senior technical point of contact on projects, programs and other work activities. Establishes and maintains effective communications with the aviation industry, with regions, centers and other FAA offices; and with other affected departments and agencies of governments, both foreign and domestic in an effort to further the understanding, support and coordination of assigned program responsibilities. ldentifies potential issues and proposes recommendations for preventative action.

Broad policies and objectives provide general guidance for addressing issues, but allow considerable discretion to develop new and innovative approaches. Draws on experience to solve unusual problems and may create new solutions and policy interpretations as the situation requires. Provides policy guidance and instruction to others, both internally and externally. Assures uniformity and consistency of performance and adherence to national and regional policies, standards, systems, and procedures.

Provides guidance to lower-level staff on how to solve difficult technical issues. Resolves all but unique technical problems without the intervention of management or a more experienced technical specialist. Develops plans, techniques and policies to address current or anticipated problems and issues. Works with management to solve problems. Work is reviewed rarely, typically through status reports and at project completion, to ensure technical compliance and alignment with the requirements of the project or other work activity.