Total 111 Transportation / Logistics job vacancies in D05 Clementi New Town, Hong Leong Garden, Pasir Panjang

Provides electronics engineering support for assigned National Airspace Systems (NAS). He/she provides resolution to problems related to the introduction of new systems into the NAS through problems associated with continued operation of commissioned facilities; but frequently refers difficult problems and work issues to a manager, program/project manager, team leader, or more experienced engineer when guidelines are not available or applicable.

Applies experience and detailed knowledge of electronic circuits, circuit elements, equipment, systems and electrical information such as communications, navigation, sensing, control and measurements, as it relates to the principles, techniques and practices of electronics engineering, to plan and accomplish assignments involving hardware/firmware/software problems such as modification and modernization to improve the reliability, maintainability, and safety of assigned NAS systems/equipment and facilities.

Follows established NASE processes and supervisory instructions for maintaining systems hardware, firmware, and software and facilities throughout the NAS and tests and recommends changes to national systems baseline configurations. Performs a mixture of routine and multiple and varying assignments under the limited direction of a sub-team manager, program manager, project lead, or more experienced engineer in the identifying and analyzing problems or system malfunctions and supporting the development and implementation of solutions.

As a contributing team member, he/she monitors performance and reliability of systems, analyzes performance and fault information from field facilities to identify causes of system failures and recommends system adjustments or enhancements. Assists in diagnosing and correcting system problems and/or failures. Work involves analyzing user requirements, monitoring systems to correct and prevent problems for optimal performance, and providing customer support for operational NAS systems. Identifies and recommending needs for functional improvements or system enhancements using statistical and empirical information. Uses prescribed guidelines to complete necessary user and technical documentation to support maintenance processes. Follows established change management practices to coordinate changes with affected stakeholders. Results of the work enable user organizations to accomplish mission requirements in the most efficient manner possible.

Assists senior engineers in the development of project plans, budgets, and schedules, identifying resource requirements, defining milestones and deliverables, monitoring activities and providing progress reports. For small projects, he/she utilizes project management to ensure that each project has a project plan and a budget that is aligned and tracked with the team's budget and goals. Demonstrates some independence in planning time and using assigned resources to perform tasks, complete small projects, and integrate and coordinate work with users and related functions, resolving most routine engineering issues that arise.

Work is reviewed periodically during assignments and at completion to ensure timeliness and technical compliance with the requirements of the project or other work activity.

Provides electronics engineering support for assigned National Airspace Systems (NAS). He/she provides resolution to problems related to the introduction of new systems into the NAS through problems associated with continued operation of commissioned facilities; but frequently refers difficult problems and work issues to a manager, program/project manager, team leader, or more experienced engineer when guidelines are not available or applicable.

Applies experience and detailed knowledge of electronic circuits, circuit elements, equipment, systems and electrical information such as communications, navigation, sensing, control and measurements, as it relates to the principles, techniques and practices of electronics engineering, to plan and accomplish assignments involving hardware/firmware/software problems such as modification and modernization to improve the reliability, maintainability, and safety of assigned NAS systems/equipment and facilities.

Follows established NASE processes and supervisory instructions for maintaining systems hardware, firmware, and software and facilities throughout the NAS and tests and recommends changes to national systems baseline configurations. Performs a mixture of routine and multiple and varying assignments under the limited direction of a sub-team manager, program manager, project lead, or more experienced engineer in the identifying and analyzing problems or system malfunctions and supporting the development and implementation of solutions.

As a contributing team member, he/she monitors performance and reliability of systems, analyzes performance and fault information from field facilities to identify causes of system failures and recommends system adjustments or enhancements. Assists in diagnosing and correcting system problems and/or failures. Work involves analyzing user requirements, monitoring systems to correct and prevent problems for optimal performance, and providing customer support for operational NAS systems. Identifies and recommending needs for functional improvements or system enhancements using statistical and empirical information. Uses prescribed guidelines to complete necessary user and technical documentation to support maintenance processes. Follows established change management practices to coordinate changes with affected stakeholders. Results of the work enable user organizations to accomplish mission requirements in the most efficient manner possible.

Assists senior engineers in the development of project plans, budgets, and schedules, identifying resource requirements, defining milestones and deliverables, monitoring activities and providing progress reports. For small projects, he/she utilizes project management to ensure that each project has a project plan and a budget that is aligned and tracked with the team's budget and goals. Demonstrates some independence in planning time and using assigned resources to perform tasks, complete small projects, and integrate and coordinate work with users and related functions, resolving most routine engineering issues that arise.

Work is reviewed periodically during assignments and at completion to ensure timeliness and technical compliance with the requirements of the project or other work activity.

As an Aircraft Engine Mechanic, WG-8602-10, you will:

• Remove, install, certify, repair, modify, overhaul, and install turboprop engines, reduction gear boxes, turbine modules, compressor modules, auxiliary power units, propellers and related propeller components as required. Perform maintenance on all propulsion systems including troubleshooting and diagnosing defects, certifying, conducting bench checks, performing in-shop and on-equipment repairs and overhaul. Diagnose malfunctions using computerized test equipment, schematic diagrams, technical publications and perform the appropriate repair according to the test results and analysis. Determine the extent of disassembly necessary to repair, overhaul, replace and certify all engine, propeller and auxiliary power unit parts. Clean and inspect engine and propeller component parts such as turbines, gearboxes, blades, gears, bearings, etc. Assemble engines, propellers and auxiliary power units, adhering to prescribed procedures, torque values, safety methods and clearances. Troubleshoot propellers using electric and hydraulic test stands to check for proper operation and evidence of oil leakage. Operationally check engines and propeller assemblies and auxiliary power units, by using the engine test cell facility to meet all full power run checks on the engine and propeller assemblies and auxiliary power units.
• Modify engines, propellers, auxiliary power units, and components in accordance with Time Compliance Technical Orders (TCTO) directives; remove and install engine quick change kits; prepare engines for installation and install engine and propeller assemblies on aircraft. Evaluate technical problems of repair, overhaul, modification and installation of aircraft propulsion systems. Solve all types of maintenance problems and perform bench checks and test engine and propeller assemblies for serviceability.
• Perform operational checks of installed propellers, engines, auxiliary power units and sub-systems during aircraft maintenance ground runs in accordance with approved checklists. Employ test equipment such as computer borescope, fuel pressure gauges, air pressure gauges, and alignment fixtures. Utilize special tools and precision measuring equipment, high-pressure hydraulic test equipment, and electronic test equipment.
• Perform isochronal and special evaluations on engines, propellers and auxiliary power units. Interpret certification findings and determine adequacy of corrective action. Certify installed and repaired engines for compliance with technical publications. Perform fixed and mobile test stand functions (which may include maintenance of engine test cell facility); install special test equipment; perform pre-operational and post operational checks. Operate engines and propellers and record test data. Operate, certify, and maintain computerized engine test/trim automated systems (ETTAS) on the engine test cell. Evaluate, identify and correct problems on propeller and engine components causing vibration or impending failure using the ETTAS system, and vibration analyzer. Evaluate engine and propeller performance by computing engine torque and specific fuel consumption. Monitor engine RPM and turbine inlet temperatures. Evaluate engine and propeller performance and accept or reject the individual components. Remove engine and propeller from test stand and prepare units for aircraft installation or storage. Accomplish operator maintenance on the aircraft and engine sound suppressor facility, test stands and various pieces of ground equipment, including the auxiliary power unit test cell. Perform dynamic propeller balancing and test the propeller integrated synchophasing. Test variable potentiometers, servo-motors, indicators and aircraft wiring.
• Perform aircraft full power runs and complete engine and propeller efficiency checks. Clear Red X symbol documentation on engine and propeller related components. Prepare man-hour data collection and required forms for input into the Core Automated Maintenance System (CAMS) or the G081 (AFI 22-2101, CAMS for Mobility). Review and assist in maintaining Technical Orders (TOs) and other technical publications and directives pertinent to the element. Maintain bench stock, parts, and equipment. Assist the material control function in identifying part numbers and stock numbers for processing and controlling of repair cycle assets. Provide on-the-job training for assigned personnel. Plan and conduct formal classes of instruction in techniques of repair and maintenance of aircraft engine, propeller, auxiliary power unit, and related equipment and in the use of diagrams, blueprints, wiring schematics and technical publications. Evaluate effectiveness of training by observation and through written and oral examinations. Advise supervisor of the experience and skill levels of assigned personnel. Maintain training documentation.
• Perform other duties as assigned.

As a Supply Systems Analyst, GS-2003-09, you will perform analysis of supply management procedures, services, and directives.

Major duties include, but may not be limited to the following:

• Pull stock inventory and material for delivery; replenish stock inventory; interact with clinical and administrative customers and maintain records on stock levels.
• Communicate to the Lead or Supervisor any concerns related to supplies, equipment and procedures.
• Provide information to customers regarding medical supplies.
• Monitor expiration dates, rotate stock to limit outdates and remove items from use as required by outdates.
• Monitor and control critical supplies.
• Perform daily inventory using bar coding equipment on a predetermined schedule that will allow for timely replenishment.
• Resolve differences between records and physical count of stock.
• Distribute items according to established or ad hoc requirements in computerized inventory management systems.
• Deliver supplies in a timely manner and ensure supplies and material delivered are in sterile and operational condition.
• Complete specialty cart preparation.
• Clean assigned secondary areas in accordance with aseptic principles.
• Receive supplies and materials into the medical center's catchment area.

Manages the administrative aspects of all technical support programs, (Quality Assurance, Airspace & procedures, training, etc.) Provides management with advice and counsel on the operation of technical support systems for implementation, and planning purposes. Incumbent performs a variety of technical functions independently and ensures that all required content is reviewed and prepared in a prescribed timeframe.

Applies experience and advanced knowledge of analytical and evaluative methods, techniques and concepts to plan and accomplish assignments. Responsible for the analytical activities to provide management with accurate, timely and authoritative information to enable decisions. Uses quantitative methods and techniques to assists more-experienced analysts in creating comprehensive reports from data and analysis as requested by management.

Performs data analysis and synthesis of large databases. Conducts analyses in the review and evaluation of program activities. These analyses are conducted to ensure proper program integration and conformance to policy, completeness, and adequacy of operations in meeting goals and objectives. Prepares recommendations based on such reviews, and discusses recommended courses of action with program managers to resolve major problem areas. These recommendations include but are not limited to financial, programmatic interfaces, and impact of not meeting goals and objectives. Establishes and maintains a tracking system, ensures facility orders and notices pertaining to technical programs and evaluations are current. Assists in the training and instructions to all personnel as necessary. Plans, develops, monitors and executes all actions required to assist in the management of the various technical programs. Incumbent collects and analyzes data, prepares responses and works with management on BU requests. Work is reviewed frequently during assignments and at completion to ensure timeliness, policy compliance, and alignment with the requirement s of projects and/o r other work activities. Work activities typically support activities of the organizational unit, and may affect project/program objectives for the major subdivision and the LOB/SO. In some specialties, the work may affect internal and external customers.

Established policies/procedures provide guidance for most assignments, but allow some discretion for incumbent to select the most appropriate approach(es). Typically receives guidance on selecting approaches from a manager, team lead, or more experienced professional.

This position is located in the Army National Guard (ARNG) Deputy Chief of Staff for Logistics (DCSLOG/G4), Distribution Management Division, Plans Policy and Readiness Branch. Its purpose is to develop command logistics guidance and support plans for federal and state missions.

• --Formulates and implements the comprehensive logistics support plans, policies and logistics operations support, based on logistics data and requirements obtained from the Joint Force Headquarters (JFHQ) staff, units, USPFO, NGB and other organizations.
• --Develops, coordinates and implements policies, procedures and requirements for unit deployment, inter-service support agreements as approved by the USPFO, emergency support for civil authorities, training exercises support and environmental compliance. Ensures coordination between units, JFHQ staff, USPFO, NGB and other agencies on command logistics support requirements. Initiates equipment redistribution guidance. Responsible for operation of the logistics operations center to support JFHQ Emergency Operations Center for Federal and State missions.
• --Obtains data from the Unit Status Report and the Material Readiness Report to determine and improve logistics readiness. Consolidates all logistics readiness indicators to formulate an assessment of the command logistics readiness of the state. Develops the Equipment on Hand policy that directs the supply and services officer and (DOL) DCSLOG/G4 to initiate equipment redistribution actions within the command.
• --Develops, staffs and implements logistics plans for material fielding, mission support and mobilization. Receives input from the Surface Maintenance Manager (SMM) regarding the Mission Support Plans to support the material fielding plan. Develops command requirements for new equipment training. Analyzes, directs and provides command logistics guidance to support CTA/TDA/MTOE changes and turn-in of command excess equipment to the USPFO.
• --Serves as the Information Systems/Automation Security Officer, Physical Security Officer and Safety Officer for the directorate, providing technical oversight throughout the shops and activities of the program.
• --Updates Internal Management Control (IMC) Plan projecting 5 years into future for all DCSLOG/G4 branches or activities. Prepares the annual DCSLOG/G4 management controls statement of assurance.
• --Performs other duties as assigned.

As an AIRCRAFT SURVIVAL FLIGHT EQUIPMENT REPAIRER, WG-4818-10, you will:

• Plan and lay out work to be accomplished in the shop which is then completed by the technician and lower graded worker(s).
• Perform the full range of shop work.
• Implement safety regulatory requirements.
• Ensure that other workers in the shop wear appropriate safety equipment and follow pertinent safety precautions.
• Prepare for and participate in various types of readiness evaluations, inspections, mobilization and command support exercises.
• Perform other duties as assigned.

This Transportation Security Manager position is located at Newark International Airport (EWR), Transportation Security Administration, Department of Homeland Security (DHS). If selected for this position, you will be responsible for mitigating threats against civil aviation and other transportation security modes. You will manage one or more programs, including, but not limited to, Checkpoints, Coordination Center, and/or Behavior Detection Officer (BDO) Screening of Passengers by Observational Techniques (SPOT) Program, as assigned by the Federal Security Director (FSD), Deputy FSD, or Assistant FSD. Duties include, but are not limited to:

• Fostering a collaborative organization that networks freely with each other to accomplish the mission.
• Developing and maintaining collaborative relationships with TSA Stakeholders.
• Supporting a culture that values an exceptional workforce through empowerment, support of risk-based decision making, and coaching/mentoring.
• Utilizing appropriate leadership styles and techniques based on evaluation of the situation, in order to effectively guide and direct staff.
• Coordinating with internal and external stakeholders (e.g., STSOs, BAOs, BDOs, airlines, etc.) to ensure communication of up-to-date threat information.
• Facilitating and contributing to daily briefing discussions, and using scenarios and examples to clarify appropriate application of Standard Operating Procedures and to engage and empower the workforce.
• Monitoring, encouraging, and continually reinforcing principles of critical thinking, specialized communication tactics, and understanding of the security threat.
• Assessing security operations and managing resources to reduce stress and encourage use of network to maximize mitigation of the threat.
• Responding to and resolving security related incidents, emergency situations, and difficult customer service issues by creating calm, establishing command presence, and using critical thinking and tactical communication.
• Creating and reinforcing a work environment that maintains open, respectful communication, values employees, and encourages the use of cooperative problem solving.

A great opportunity to be part of a dynamic and progressive mid-size SME healthcare provider with a regional presence, as MD Pharmaceuticals Pte Ltd continues on its growth and expansion plans in Singapore, Malaysia, Hong Kong, Thailand, Myanmar and other parts of Asia in the coming years.

MD Pharmaceuticals is now seeking to hire:

• Warehouse Operations cum Delivery Driver

Job Description:

• Ensure that all warehouse logistical operations and processes run smoothly. This includes inventory level monitoring, proper organization of the warehouse, ensuring standard operation procedures (SOPs) are followed, maintaining safety and cleanliness standards, etc.
• Receive and check all incoming goods shipments & prepare outgoing goods shipment for overseas.
• Re-packaging of goods for customers, whenever necessary.
• Ensure that all orders are properly packed and are matched with the correct invoice documents before being sent out for local delivery.
• Ensure safe transportation and timely delivery of goods (including loading and unloading) to customers in Singapore.
• Resolve any delivery discrepancies or customers' complaints in a professional and service-oriented manner on the spot.
• Prepare work reports and other documents related to deliveries.
• Maintain company vehicles in clean and good working condition.
• Perform other ad-hoc duties as assigned, including general warehouse duties (eg: maintaining proper organisation, cleanliness, safety standards of warehouse, etc.).

Key Requirements:

• Must have a valid Class 3 driving license, with good driving record and very few traffic violations.
• At least 2 years of warehouse operations and/or delivery driver experience.
• Physically fit and able to carry heavy goods.
• Strong time management skills and self-discipline, with ability to work under tight deadlines in a fast-paced environment.
• Good customer service attitude, patient and flexible.
• Able to work independently and also as a team.
• Must be able to read and write in English.
• Candidate must be already living/working in Singapore now.

Interested candidates, please submit your updated resume with your expected salary to us through the “Apply Now” button.

Responsibility
As a lorry driver, need to responsible delivers parts and equipment to customers. Ensure that items are in good condition and timely condition when delivered to customers. In additional, need making cosmetic repairs to vehicles and repainting them.

Job Description
* Ensure the customer receives the product in good condition.
* Collect payment and providing excellent customer service, answering questions and handling complaints from clients.
* Assist Operations Manager in tasks related to delivery of Company’s goods.
* Follow road safety rules and regulations.
* Maintain and upkeep the vehicle in good and clean condition.
* Assist in ad-hoc duties when necessary.
* Preparing parts and assemblies for painting
* Mix paint and other materials according to specification or formula
* Ensure facility and spray painting equipment are in good working condition
* Utilize solvents, wire brushes, and cloths for cleaning sprayers and power equipment
* Follow company requirements to select paint, and match colours of paint following specified colour charts
* Able to carry heavy goods, about 20KG-40KG.
* Able to work rotate shift and overtime.
* The position requires good eyesight, hearing and physical condition. Because delivery drivers often deal with customers, employers look for applicants with initiative, who are neat, well spoken, courteous and work well with little supervision. A satisfactory driving record is usually required.
Working area: Defu lane area, the 1st trip start at 6am-630am.

Requirement

* At least 2 Year(s) of working experience and have experience in the related field is required for this position.

* Must possess at least higher Education/ Diploma in any field.

* Possess a Singapore Class 3 driving license or able to take Class 3 Driving License.

* Strong leadership skills and management competencies.

* Strategic & critical thinking as well as decision-making and negotiation skills.

* Able to adapt, prioritize, exercise initiative, manage pressure, multi task and work independently.

* Excellent organizational and coordination skills, including communication and interpersonal skills to deal with a diverse spectrum of people.

* Time management/ meticulous and mature in work.

Benefits:

• Competitive salary up to $3,200 + variable bonus + AWS
• 5-day work week (Monday to Friday) with regular hours for work-life balance
• Opportunities for on-the-job training (OJT) and professional growth
• Gain experience working with international shipments and customs documentation
• Collaborative and supportive team environment

Job Description:

We are seeking a detail-oriented Sea Freight Executive to manage and coordinate sea import shipments. This role includes handling customs permits, organizing documentation, and ensuring that all shipment processes align with company procedures. Strong communication and customer service skills are essential to work effectively with clients, agents, and service providers.

Roles & Responsibilities:

• Coordinate Sea Import and Export shipments by opening files, maintaining documents, and updating shipment statuses using Sysfreight software
• Advise clients on shipment arrival details and arrange deliveries
• Process invoices accurately, ensuring correct currencies and verification of shipment weight and volume
• Handle customs declaration for Import and Export permits
• Verify Bill of Lading, invoices, and all shipment-related documents
• Arrange transportation for pick-up or delivery as needed
• Maintain communication with clients, overseas offices, and agents professionally through various channels
• Ensure work aligns with company SOP and escalate irregularities as needed
• Build strong relationships with clients, carriers, and service providers for seamless operations
• Suggest improvements in processes for cost control and customer service enhancements
• Handle ad-hoc duties as assigned

Requirements:

• Minimum 1 year of relevant experience in sea freight coordination
• Strong attention to detail and organizational skills
• Proficiency in Sysfreight software is an advantage
• Able to work independently and communicate professionally
• Ability to multitask and prioritize tasks in a fast-paced environment

Additional Information:

• Salary: Up to $3,200 basic + variable bonus + AWS
• Working Location: Cargo Agents Building, 115 Airport Cargo Road, Singapore 819466 (Main Office)
• Working Days: Monday to Friday, 9am - 6pm

Candidates are expected to:-

• Ensure seaworthiness of the ship in accordance to voyage schedule;
• Lead the ship’s officers and crew in the following, including but not limited to:-

1. Comply with applicable rules, instructions, and contracts of cargo operations;
2. Implement and execute prevailing maritime safety and environmental policies;
3. Enforce security and safety procedures in accordance with local, national, and international laws and requirements;
4. Upkeep and review relevant shipboard documents, certificates, and records, including but not limited to vessel certificates, navigation manuals, and crew qualifications;
5. Review safety and environment-related activities; and
6. Review shipboard contingency procedures.

• Take charge of the Safety Management System, including but not limited to:-

1. Lead and assign roles to senior officers;
2. Ensure the system is kept current through regular audits; and
3. Ensure all records are kept current and accurate.
4. Ensure all ship’s crew possess qualifications that comply with maritime regulations and conventions, such as MARPOL, SOLAS, SCTW, and ISPS; and

• Ensure that onboard training requirements are met.

The ideal candidate should preferably:-

• Possess a valid Certificate of Competency (Deck Officer) Class 1.
• Have at least 4 years of experience as a Ship Master onboard a container vessel.

• Loading and unloading of goods onto vehicle according to delivery order
• Perform pickups and collection for the company covering specific areas
• Ensuring safe receipt, retrieval and dispatching of goods
• Delivering goods to our customers in a safe, courteous, and timely manner
• Establishing and maintaining excellent customer service during delivery
• To perform duties as tasked
• Class 3/4 Driving Licence
• Able to work night shift and split shift
• Able to work ot on weekend and split shift
• · Must be able to work night shift and split shift
• · Must be able to work extra hours or weekend if needed

COMPANY DESCRIPTION

Mediacorp is Singapore's largest content creator and national media network, operating a suite of TV channels, radio stations, and multiple digital platforms. Its mission is to engage, entertain, and enrich audiences by harnessing the power of creativity.

We are committed to creating an inclusive and diverse workplace where talent thrives. Our hiring decisions are made based on merit and fit-to-role. If you have a disability or special need which requires accommodation to participate in the recruitment process, please inform us when you submit your online application. We will be happy to support as necessary.

Thank you for your interest and application to this role. Please note that only short-listed candidates will be contacted.

RESPONSIBILITIES

Responsible for trade/B2B marketing activities of Content Distribution department including trade events, marketing collaterals and digital marketing.

Events Management:

• Identify and plan key local / overseas content markets for branded booths to promote latest programme offerings, as well as identifying relevant programmes to promote in each market.
• To manage/produce marketing collaterals required for branded booth according to trade market requirements.
• Manage the procurement process of for events set up and coordinate with awarded vendor for set up to ensure smooth delivery of booth at each content market.

Marketing Collaterals:

• Collate marketing information for programmes by working with the relevant production teams and external stakeholders for material required for programme sales (may be required to do translation work, ability to translate from Chinese to English and vice versa will be an added advantage).
• To plan and manage marketing collateral production such as programme posters (for use across all marketing platforms such as events, website and brochures) and brochures (both hard and digital copies).

Digital Marketing Content website / EDMs:

• Responsible for managing and updating the department's content website, including updating of programme info and video files.
• Required to work closely with the digital team to improve/refresh on aesthetics of website and problem-solve when issues occur.
• Plan EDMs and other digital communication tools to promote Mediacorp content in region-specific campaigns.

• A degree in Marketing, Business or a relevant discipline.
• 4 - 6 years of related experience in Marketing.
• Good communication and team work.