Total 44 engineering job vacancies in remote florida

This is a bargaining unit position. This position is represented by AFGE. Please note that as provided for in the AFGE/VA Master Agreement the FIRST area of consideration for this position will be permanent employees of the local facility in which this position is being filled, the SECOND area of consideration will be employees at other VA facilities, and the THIRD area of consideration will be all other eligibles.

Operates one or more types of heavy equipment with multiple hand and foot controls, such a as a backhoe, to dig, push, pull, pile, and load earth. For example, the operator uses equipment that is fitted with a front-end loader to maneuver to a specific spot to transfer material from the ground into a dump truck. The equipment is used as a tool for the purpose of digging multiple graves and preparing grave sites for first and subsequent interments. Landscapes grave sites by clearing brush, tree stumps, and rocks and cleaning underdeveloped land. Adjusts attachments for proper level, angle, and depth, according to the work to be done and they type of equipment used. Work is generally done on flat or rolling terrain, at new or previously landscape grave sites with simple terrain problems.

Operates backhoe in place to excavate earth composed of dirt, rock, sand, and/or clay from grave sites. Digs graves on level ground and hillsides above or below the frost line under widely varying conditions, subject to contact with mud, ice, snow, rock, hand-pan clay, and tree stumps. Uses equipment to dig ditches in occupied grave sites for the placement of French drains and to backfill and tamp grave sites following burials.

Work schedule: May be required to work Monday through Friday to include occasional weekends. Due to the mission of the National Cemetery, the cemetery cannot be closed for more than 2 consecutive days at any given time. Additionally, when a Federal holiday falls on a Monday or Friday, staff may be required to work on that holiday or a Saturday. All staff is required to work Memorial Day each year. Staff will be required to work overtime, weekends and holidays when necessary to meet the needs of the cemetery. Occasionally staff may be called back to the facility to perform emergency overtime work.
Compressed/Flexible Schedule: Not Available Not Available

Position Description Title/PD#: Engineering Eqpt Operator/ PD136400
The full performance level of this position is WG - 08.

Relocation Expenses: Not Authorized
Relocation/Recruitment Incentives: Not Authorized
Financial Disclosure Report: Not Required

Starting at $24.66 Per Hour (WG 8)

• Manages the overall development efforts for a significant and complex NASA program or a set of complex projects with multiple interfaces and extensive scope and variety.
• Supports the planning, integration, coordination, and critical management of problems with respect to requirements development and execution, contract management, and program management of complex software and hardware systems.
• Monitors contractors engaged in various projects for the program.
• Assists the Office chief in Directorate long-range planning for new and expanded program objectives specifically targeted at carrying out NASA's goals, objectives, and strategies.
• Supports mission requirements and initiates design and modification efforts as necessary.
• Monitors and controls program or project development efforts and resource utilization.
• Restructures and re-orients Division goals to meet requirements as necessary.
• Leads and provides technical expertise in the areas of Project management, engineering, and technical integration.
• Performs a full range of supervisory duties which includes assigning and evaluating work; recommending personnel actions; taking disciplinary actions; and identifying training needs and developing employees.
• Fosters a culture of engagement, diversity, inclusiveness, excellence and innovation. Champions NASA's commitment to Diversity, Equity, Inclusion and Accessibility to create an environment that promotes a commitment to safety, integrity and teamwork.

Starting at $144,696 Per Year (GS 15)

• You will serve as the senior civilian employee at the Public Works Department (PWD) responsible for the delivery of a full spectrum of public works services to the installation and supported commands to enable mission success.
• You will direct, control and coordinate all operations within the Public Works Department using broad knowledge in facilities management, technical, financial and administrative skills.
• You will formulate and monitor PWD budget requirements taking into account workload forecasts, payroll requirements, travel, training and other overhead requirements.
• You will direct Public Works Department subordinate supervisors, evaluate performance and hear grievances or complaints not resolved at lower levels of the department.
• You will review disciplinary actions and interact with union official in accordance with negotiated bargaining unit agreements.
• You will maintain liaison with senior level leaders throughout the installation and NAVFAC.

Starting at $122,198 Per Year (GS 14)

• You will independently lead or participate as a key analyst in both workplace studies and/or process improvement efforts broad in scope, but most often focused on work performance measurement, methods, and procedures.
• You will conduct audits and evaluations, surveys, stakeholder interviews and focus groups, and collect, analyze, interpret, and correlate large amounts of narrative and statistical data about various process measures.
• You will help employees develop strategies and tactics for data analysis and visualization projects.
• You will draft policy guidance, recommendation and point papers, and brief senior leaders on findings and recommendations for increasing broader organizational effectiveness.
• You will provide a broad scope of support on other projects to include: tracking taskers, developing and tracking execution of financial spend plans, and supporting survey development and analysis.

Starting at $72,553 Per Year (GS 11-12)

• You will provide a full range of classification services.
• You will resolve complex problems with a large number of diverse/hard to fill positions.
• You will prepare and review position descriptions.
• You will coordinate and assist with desk audits.
• You will analyze and provide guidance on special program requirements for some positions, such as Drug Free Workplace Program, Key/Emergency Essential, DAWIA, and other pre-employment contingencies.
• You will prepare responses to data calls.

Starting at $86,962 Per Year (GS 12)

• You will plan work to be accomplished, set and adjust priorities and prepare work completion schedules. Assigns work to subordinates based on priorities, consideration of assignment difficulty and requirements and the employee capabilities.
• You will perform various administrative responsibilities (i.e. approving leave, monitoring attendance/leave usage, and tracking budget/expenses).
• You will interpret and apply recruitment and placement laws, regulations, policies, and practices to provide advice and guidance to managers, supervisors, employees, and applicants.
• You will provide advice on the establishment of new/revised position descriptions, reorganizations/ realignments, classification advisories, etc. using the Office of Personnel (OPM) Management Classification Standards.
• You will serve as technical expert in OPM, DOD and DON workforce shaping programs and policies sufficient to advise senior management on options and develop plans to achieve workforce shaping initiatives.

Starting at $103,409 Per Year (GS 13)

• You will provide assistance and technical guidance as the Construction Schedule Analyst in support of planning, engineering, design, procurement, and construction.
• You will participate in Cost Schedule Risk Analysis (CSRA) process as necessary during the planning and design development phases.
• You will develop, maintain, and provide scheduling requirements and supporting software training to Cost, Schedule, and Risk community
• You will work independently and takes required actions through their own initiative, experience, and foresight on all assigned projects.
• You will provide leadership to the scheduling technical community to ensure consistency in process and execution.
• You will review the scope of individual construction projects and propose reasonable construction duration to be included in the RFP or solicitation.
• You will manage multiple priorities and, when requested, independently develop and provide technical recommendations/solutions regarding scheduling issues and time impacts.

Starting at $103,409 Per Year (GS 13)

• You will utilize real estate principles, practices, markets and values, and applying the techniques, principles and methods applicable to real estate agreements.
• You will review realty transactions and conveyances and evaluating the effects of various methods of acquisition, property management, or disposal upon the uses and value of land.
• You will apply contracting methods/procedures pertaining to the full scope of real estate transactions, and provide on the spot guidance in complex situations.
• You will lead multi-functional teams as project manager as scope is identified and executed and providing on-the-job training and mentoring to other Realty Specialist.
• You will apply Federal, DOD, and Navy laws, regulations, and policies governing real estate transactions within the United States.

Starting at $103,409 Per Year (GS 13)

• You will advise requestors on the use of cost and fixed-price contracting during pre-solicitation of contracts.
• You will analyze price or cost data for pre-award and post award procurement activities of construction and Architect/Engineering, (A/E) contracts.
• You will conduct pre-negotiation conferences to negotiate prices, terms, conditions, contract modifications, and settlements.
• You will negotiate and resolve problems related to procurement planning, source selection, and contract performance.
• You will direct a full range of procurement pre-award and post-awards functions to include drafting and issuing solicitations, negotiations, source selection, contract award, contract modifications and contract closeout.
• You will review contract proposals, acquisition, source solicitation plans, or documents prior to contract pre-award and post-award for regulatory compliance.

Starting at $103,409 Per Year (GS 13)

Are you tired of working away from your family? Want to work for a family-owned industry leader in the supply of services to the mining and resources sector? Apply with Camco now!

We are on the hunt for a 1st Class Welder for our Karratha division.

Why should you work for Camco Engineering?
- Additional Allowance and Potential Bonus
- Regular Overtime Available on Day shift and Night Shift
- Weekly Pay.
- Excellent Long-term Career Development
- Industry Leader
- Social Club
- Laundered Uniforms

What do you need?
- Experience in a medium to heavy engineering workshop
- Be a Trade Qualified Welder
- Mechanical Aptitude
- Ability to do repetitive tasks
- Have pride in the work that you produce
- Ability to read and interpret engineering drawings and specifications
- Ability to follow work instructions and procedures
- Experience in dealing with Quality Assurance systems
- Demonstrate safe work practices at all times
- Commitment to HSE and QA functions

Camco Engineering is an Equal Opportunity Employer and encourages Aboriginal & Torres Strait Islander peoples to apply.

#camcocareer #thewaywework #camcokarratha

NOTE: Only shortlisted candidates will be contacted

About Camco Engineering:

Camco Engineering is a leading provider of Mechanical Engineering services and has been operating within Western Australia since 1995. Camco employs in excess of 480 persons with facilities in Canning Vale, Belmont and Karratha.

We are currently looking for a Boilermaker for our Karratha Division on a Full-Time Basis.

Benefits and Perks:
Competitive Rates.
Weekly Pay.
Regular Overtime.
Opportunities for Long-Term Professional Advancement.
Social Club.

Requirements:
Experience in a medium - heavy engineering environment.
Qualified tradesperson - minimum of 3 years industry experience.
Ability to read and interpret engineering drawings and specifications.
Ability to follow work instructions and procedures.
Ability to work unsupervised.
Ability to work within a team.
Experience with Quality Assurance systems.
Demonstrate safe work practices at all times.
Experience in mechanical fabrications and pipe fabrications.
Working with Gra\d 250 – S/S and high alloy steels.
Strong commitment to HSE and QA as a priority
Camco Engineering is an Equal Opportunity Employer and encourages Aboriginal & Torres Strait Islander peoples to apply.

#camcocareer #thewaywework #camcokarratha

NOTE: Only shortlisted candidates will be contacted

Camco Engineering provides a range of manufacturing & maintenance services to the mining, power generation and oil and gas sectors. We are currently seeking to employ a qualified and experienced 1st Class Machinist - Manual and CNC to work in our Canning Vale workshop in Perth WA.

Wages and Conditions:
Competitive rates
Incentive bonus’
Regular overtime
Advancement opportunities
We encourage training and further personal development
Excellent conditions in modern facilities
Supplied and laundered uniforms
Regular social events

Essential Skills & Responsibilities:
Setting up jobs and tooling for production purposes.
Use machining tools to mill, cut, grind, bore, drill and plane to form various metal stock and castings. All to fine tolerance
Visually check measuring equipment and report any equipment requiring repair or recalibration
Report all malfunctions or damaged equipment

Prerequisites:
Year 10 education minimum
Trade certificate in relevant trade
Knowledge of machine shop practices

Typical experience:
Vertical Borer CNC
Horizontal Borers- Manual & CNC
Milling Machines- Manual & CNC
Centre Lathes- Manual & CNC
We require a strong commitment to HSE and QA as a priority, and the ability to work unsupervised and function well within a team environment.

Camco Engineering is an equal opportunity company and encourages diversity in the workplace.

Please note: Only shortlisted candidates will be contacted.

#camcocareer #thewaywework #camcokarratha

Karratha, Full Time, Engineering
Vacancy Listing Dates 11/09/2024 to 9/10/2024
Please Quote Reference Number 97603
- Seeking experienced Mechanical Engineering Techs & Electrical Engineering Techs
- Salary: $90,000 - $150,000
- Join the team at Archipelago Marine in Karratha

Archipelago Marine specialises in providing quality electronic products and maintenance services to the marine industry including government agencies and large offshore vessels.

Archipelago Marine is currently hiring for Mechanical Engineering Technicians and Electrical Engineering Technicians. We recognise your enthusiasm for becoming a part of our team and are keen to support your professional development. Our focus on excellence and innovation is at the core of our business, offering a solid foundation for your skills to develop and succeed.

We are not just offering jobs, but long-term career opportunities that promise growth and advancement within the company. If you're looking for a role where your contributions are valued and your professional growth is a priority, please join us to build a future where your career aspirations align with our commitment to progress and hard work.

Our company has been operating for over 15 years and is one of the premier companies of its type in our field. It's a great industry which is truly rewarding to work within and provides great opportunities and a wide variety of experiences.

We're currently looking for qualified:

Electrical Engineering Technician

We are hiring an Electrical Engineering Technician to support the development and maintenance of electrical systems and equipment.

This role involves:
- Conducting tests, compiling data, and assisting engineers in creating prototypes and new applications.
- Install, repair and maintain marine electronic radio and navigation systems
- Inspect and test electronic equipment, components, and assemblies using multi meters, oscilloscopes, spectrum analyser, and other electronic test instruments, tools and equipment
- Perform radio inspections according to IMO and Class authorities
- Adjust, align, replace or repair electronic equipment, assemblies, and components following equipment manuals and schematics, and using soldering tools and other hand and power tools
- Update manufacturers software
- Complete company-required service reports and documentation
- Proficiency in diagnostic tools and technical software is required.

Mechanical Engineering Technician
We require a Mechanical Engineering Technician to assist in the design, development, and testing of mechanical equipment.

Duties include preparing reports, performing diagnostics, and supporting the engineering team in technical aspects of project delivery, as well as:
- Conducting mechanical tests, compiling data, and assisting engineers in developing prototypes and new mechanical applications.
- Installing, repairing, and maintaining mechanical systems and machinery used in various applications.
- Inspecting and testing mechanical equipment, components, and assemblies using precision measuring tools, diagnostic equipment, and other mechanical testing instruments.
- Performing inspections and maintenance in compliance with industry standards and safety regulations.
- Adjusting, aligning, replacing, or repairing mechanical components and systems following equipment manuals, blueprints, and schematics, using hand tools and power tools.
- Assisting in updating or upgrading mechanical systems and software associated with equipment controls.
- Completing service reports and required documentation to ensure accurate records of maintenance and repairs.

Remuneration/Salary:
The position is full-time and the remuneration package includes a salary of $90,000 - $150,000 dependent on qualifications and experience

Successful applicants will likely have:
- Competence to prepare and/or read drawings including schematic drawings,
- Have good knowledge of hydraulics and general mechanics, heavy vehicles and/or automotive plant.
- Good sense and ability in fault finding and solutions generation and implementation,
- Able to follow correct procedures & processes,
- Good working knowledge of OS&H and Environmental practices

Skills, Qualifications and Experience:
- AQF Certificate III or equivalent or relevant experience
- Minimum 3 years’ experience

About You:
- Strong communication and time management skills
- Be organised and self-motivated

Apply now through our online application form -
https://www.netyourjob.com.au/jobs/97603.php

Camco Engineering provides a range of manufacturing & maintenance services to the mining, power generation and oil and gas sectors.

We are currently seeking to employ qualified and experienced Mechanical Fitters in Karratha for an immediate start.

Benefits and Perks:
Competitive Rates.
Regular Overtime Available.
Weekly Pay.
Excellent Long-term Career Development.
Industry Leader.
Social Club.
Attendance and Sick Leave Bonus'.
Supplied and Laundered Uniforms.

Essential Skills & Qualifications:
Experience in the workshop-based environment.
Experience in diagnosing and maintaining machinery that includes the repair and overhaul.
Ability to use precision in measuring instruments to determine the accuracy, clearance and fit of assembled and fabricated metal parts.
Operating equipment and carrying out all work in a safe and efficient manner.
Carrying out production requirements as shown on Job Sheets and Manufacturing Work Instructions.
Preferred experience with conveyor pulleys and with overhead cranes.
Preferred forklift Licence.

Prerequisites:
Trade certificate in relevant trade
Preferred forklift Licence.
We require a strong commitment to HSE and QA as a priority, and the ability to work unsupervised and function well within a team environment.

Camco Engineering is an equal opportunity company and encourages diversity in the workplace.

Please note: Only shortlisted candidates will be contacted.

#camcocareer #thewaywework #camcokarratha

03rd July, 2024
Manufacturing Engineering Apprentice   Acro Aircraft Seating is one of the UKs leading and fastest-growing manufacturers of passenger seats for commercial airlines around the world.  We are an agile, innovative business at the forefront of disrupting the aerospace market. Through modern methodologies, lean techniques, inspired innovation, and passion for being the best, Acro is positioning itself to be the worlds leading aircraft seating supplier.    Collaboration is one of Acros core values, by working together and applying our skills and expertise across Sales, Engineering, Quality, Supply Chain and Operations, we find the solutions to our clients most complex challenges and how we deliver our promises today and tomorrow.       Location:               UK Salary:                   Competitive     EXCELLENT BENEFITS  

25 days holiday bank holidays
Pension
Healthcare scheme
Life assurance
Employee Assistance Programme
Retail discounts
Training

... Click here to view more detail / apply for Manufacturing Engineering Apprentice