Total 30 engineering job vacancies in forbes afb kansas

• Serves as management consultant on aircraft production process, equipment, tooling and their subsystem design, operations, modification, and replacement.
• Accomplishes research and investigations to determine appropriate Non-Destructive Inspection (NDI) techniques for any aircraft structure, engine and their subcomponents.
• Works with organizational managers, budget personnel, and engineering authorities to develop and gain approval for proposed NDI equipment and tooling programs/projects.

1. Plans and administers service contracts relating to base maintenance, repair, and recurring service requirements.

2. Technical representative for contracting officer. Interprets and clarifies plans, specifications, and other proposal documents.

3. Provides information and advice to construction agents concerning contractor services, products, and requirements on a regular basis.

4. Develops and implements a contract quality assurance inspection schedule for all contract services acquired.

5. Summarizes results of evaluations of contract performance and calculates recommended changes in payment as required.

6. Prepares funding estimates and all supporting data in connection with justification of budget requirements to support all acquired contract services and modifications to contracts.

Continued from Summary: The primary purpose of this position is to ensure optimal resource decisions are made and executed across civil engineer activities and ensure data and information from all shops are applied to the applicable Asset Management Plan (AMP) and other investment and execution plans. Utilize proactive data and information from Sustainment Management Systems to conduct performance analysis, risk-based sustainment decision making, resource optimization, and life-cycle requirements planning. Additionally, serve as an interface with customers to collect and validate user requirements. Perform Preventive Maintenance analysis and planning; corrective maintenance analysis and planning; and provide support to the Engineering Flight (CEN) on cradle-to-grave project execution within a Civil Engineer Squadron at an installation.

Duties/Responsibilities:

• Manages and executes Asset Management Plans (AMP) and/or Sub-Asset Management Plans (Sub-AMP) for entire installation.
• Integrates and synchronizes Operations Flight work force for Sustainment Management Systems (SMS) data standards, collection, and analysis.
• Integrates and synchronizes Operations Flight work force for preventive maintenance (PM).
• Integrates and synchronizes Operations Flight contract project development, review, construction, and integration, and warranty management pertaining to respective portfolio.

1. Plans and administers service contracts relating to base maintenance, repair, and recurring service requirements.

2. Technical representative for contracting officer. Interprets and clarifies plans, specifications, and other proposal documents.

3. Provides information and advice to construction agents concerning contractor services, products, and requirements on a regular basis.

4. Develops and implements a contract quality assurance inspection schedule for all contract services acquired.

5. Summarizes results of evaluations of contract performance and calculates recommended changes in payment as required.

6. Prepares funding estimates and all supporting data in connection with justification of budget requirements to support all acquired contract services and modifications to contracts.

• Develops business case for new depot equipment, facility systems, and utilities; and for upgrade, repair, and maintenance requirements of each.
• Develops, manages, and conducts engineering and technical group related training programs.
• Maintains surveillance over construction contractors to ensure overall compliance with contract specifications, schedules, etc.
• Takes the lead in performing project management planning, design, and troubleshooting work for establishing new industrial workload plans and for modifying existing workload layouts as needed.
• Coordinates projects with other engineering disciplines or with architects.
• Complies with health, safety, and environmental rules and procedures and performs work in a manner that enhances the safety of the work environment.

• Provides administrative and technical guidance to the office staff and other field offices.
• Prepares contract modifications initiated in the field for unlimited dollar amounts.
• Performs or directs a variety of related duties.

• Operate a variety of vehicles such as 5, 8 and 20-ton dump truck and a 1-ton truck for transporting personnel, articles, and materials on and off post on public roads and highways.
• Determine the correct operation of the equipment and the required attachments, frequently handling the varied controls at the same time to perform the work.
• Operate equipment in on all types of terrain and confined areas, requiring operational control relevant to the complexity of the equipment.
• Operate a dump truck with front mounted snowplow and rear mounted sand and salt spreader and other special purpose vehicles such as trailer mounted air compressor, vacuum leaf picker, tractor mower and fuel truck.
• Operate a 2.5-cubic yard diesel driven bucket loader to load sand, dirt, or gravel for transporting by dump truck.
• Operate a 12,000 - pound street sweeper, tractor mounted front end street sweeper, and a 5-ton, 1000-gallon street flusher in the maintenance of on-post streets.

1. Independently plans and executes plant design studies and projects which have a significant impact on the workload, operations, and/or costs of related organizations.
2. Plans, designs, and recommends complete new or improved facilities.
3. Prepares, justifies, and submits work requests to Civil Engineering and Plant Management Division.
4. Concerning related Complies with health, safety and environmental rules, federal, state, and local policies and procedures regarding technical conduct and performance.

• Work independently creating unique and complex designs and drawings for aircraft T-2 modifications requiring a great deal of initiative and research to complete while maintaining a high level of precision and accuracy.
• Independently and routinely conducts accurate aircraft surveys for design and installation of group B components.
• Creates design presentations and supports preliminary and critical design reviews with customers.

• Serves as an Engineering Technician and Advanced Manufacturing in support of the Travis AFB Centralized Air Force Manufacturing Center (CAFMC).
  
• Review and approve organic (Air Force Developed) production level, repair and/or first article TDPs: Reviews design drafting projects (Technical Data packages, 2D drawings, 3D solid models and Engineering Orders (EOs) based on determination of technician's current capabilities.
  
• Performs a wide array of manufacturing engineering technician duties in support of aircraft part repair and origination.
  
• Performs project planning, design, and troubleshooting work for establishing new facility and laboratory plans and for modifying existing floor plan layouts as needed.
  
• Coordinates projects with other engineering disciplines. Applies knowledge of other disciplines to determine coordination required to ensure all design and repair considerations have been addressed.
  
• Participates in discussions, meetings or serves on panels or committees.

• Make site evaluations to assess the need for engineering measures and make or recommend a preliminary selection of appropriate measure alternatives.
• Make site evaluations to assess the need for engineering measures and make or recommend a preliminary selection of appropriate measure alternatives.
• Design engineering practices and structures involved in a variety of conservation programs, to include assembling complete packages of drawings and specifications for jobs and preparing drawings using CADD and manual methods.
• Inspect work under construction and maintain construction inspection records according to current policy.
• Determine the type, scope, and intensity of field investigations and surveys.
• This includes collecting field data, processing and plotting data related to engineering practices, and ensuring that procedures and products conform to current service policy and standards.

• Instructs students through assigned blocks of instruction at basic and/or advanced levels.
• Develops and/or revises lesson plans and training materials.
• Monitors and evaluates student progress and performance.
• Inputs necessary data into the Technical Training Management System (TIMS).
• Maintains professional and technical expertise.

• Operates boom cranes where maneuverability is restricted and accuracy is critical. Uses and maintains tools and equipment.
• Applies skilled techniques in moving loads near obstructions.
• Operates one or more types of heavy equipment to excavate, backfill, grade, or level earth to rough specifications on such projects as breaking new ground for trails, roads, airfields, or other construction sites.
• Utilizes safety practices and procedures following established safety rules and regulations and maintains a safe and clean work environment.
• Maintains, repairs, and constructs rigid pavements or similar cement and concrete surfaces; maintains, repairs, and constructs flexible roads, pavements, parking areas, airdromes, bike paths, or similar surfaces of asphalt.

• Works independently creating unique and complex designs and drawings for aircraft T-2 modifications requiring a great deal of initiative and research to complete while maintaining a high level of precision and accuracy
• Independently and routinely conducts accurate aircraft surveys for design and installation of group B components
• Creates design presentation and supports preliminary and critical design reviews with customers

- Operates one or more types of heavy equipment to excavate, backfill, grade, or level earth to rough specifications on such projects as breaking new ground for trails, roads, airfields, or other construction sites.

- Maintains, repairs, and constructs rigid pavements or similar cement and concrete surfaces.

- Maintains, repairs, and constructs flexible roads, pavements, parking areas, airdromes, bike paths, or similar surfaces of asphalt

- Utilizes safety practices and procedures following established safety rules and regulations and maintains a safe and clean work environment.

- Uses and maintains tools and equipment