This position is aligned under the Grounds and Transportation Shop, Facilities Management Division, at the Clement J. Zablocki Medical Center, Milwaukee, WI (695) - a Level la Complexity VHA Facility. The work involves operating large equipment, driving vehicles (less than GVWR of 8000lbs), and performing grounds maintenance.

Engineering Equipment Operator Duties:
Incumbent operates one or more types of heavy equipment to excavate, backfill, grade, or level earth to rough specifications on such projects as breaking new ground for construction sites. The incumbent will be performing in the excavation of soils to support necessary repairs to storm drains, steam pipes, electrical repairs, and water lines. The equipment will also be able to push, pull, pile, or load and unload materials such as sand, gravel, earth, coal, or refuse.

Incumbent operates and utilizes the following equipment and vehicles: John Deere 444J Heavy Duty Wheel Loader (plus attachments), Hyundai HL930AXT (plus attachments), JCB Telehandler, JLG ariel lift, Case 580 Backhoe, John Deere Tractor, Holder Model 259 Sidewalk Tractor, Trackless MT6 Sidewalk Tractor, New Holland Skid Steer (plus attachments), Z-spray Stand on sprayer ZS5260, Bobcat CT335 Tractor (plus attachments), Hustler 4400, 4600 and Z-series Industrial Lawn Cutting Tractors, other like rented equipment, pick-up trucks, vans, SUVs, and sedans.

Gardener Duties:
Incumbent performs a wide variety of duties involved in the development, care, and maintenance of trees, plants, shrubbery, recreational areas, and lawns. Throughout the season, the incumbent will clear brush, tree stumps, rocks and remove trees. Perform trimming, to hedges and shrubbery both for aesthetics, shaping and for good growing characteristics.

Utilizes stand on sprayers for fertilizing, pruning shears, chain saw, stump grinders, riding mowers, tractor, gasoline powered push mowers, gasoline string trimmers and vehicles with less than 8000 GVWR.

Motor Vehicle Operator Duties:
As a member of the Snow Emergency Response Team, incumbent performs snow removal from VAMC streets, sidewalks, and parking lots during by hand shoveling, snowblowers or with trucks, sidewalk plow, wheel loaders equipped with plow, bucket, pusher box and Hustler equipped with snow blower.

Works closely with Compensated Work Therapy (CWT) personnel performing grounds maintenance. Incumbent preforms safety inspections and preforms minor preventative maintenance on all equipment utilized and reports any repairs that incumbent could not accomplish to the Supervisor/Work Leader of the Transportation Team. As assigned, cleans and makes daily checks of fuel, oil, tires, hydraulic fluid, and battery of equipment to be utilized using the Pre-trip and post inspection log.

Operates a pressure washer, used to clean vehicles, various pieces of other heavy equipment, and areas such as sidewalks, brick, and stonework. Pressure washer is mounted on a stationary platform and is operated by a kerosene powered engine. Platform is moved by either pushing or pulling.

Incumbent drives pickup trucks, vans, SUVs, and sedans in accordance with station regulations and Wisconsin laws.

*Work Schedule: Full-time, Monday-Friday, 7:30 AM-4 PM and this position is considered emergency essential and may be required to work outside of his/her normal duty hours for snow emergencies and utility outages, maintenance and projects support, etc.

*The position is AWS eligible for 8-9 hr days, 1-8 hr day and one day off a pay period, the day off being a Tuesday, Wednesday or Thursday.

*Work requires a valid Class D driver's license. This license must be kept current.*Incumbent must obtain (within 90 days of hire) and possess a Wisconsin Department of Agriculture Trade and Consumer Protection Commercial Applicator of Pesticides License. This license must be kept current.

This position is aligned under the Grounds and Transportation Shop, Facilities Management Division, at the Clement J. Zablocki Medical Center, Milwaukee, WI (695) - a Level la Complexity VHA Facility. The work involves operating large equipment, driving vehicles (less than GVWR of 8000lbs), and performing grounds maintenance.

Engineering Equipment Operator Duties:
Incumbent operates one or more types of heavy equipment to excavate, backfill, grade, or level earth to rough specifications on such projects as breaking new ground for construction sites. The incumbent will be performing in the excavation of soils to support necessary repairs to storm drains, steam pipes, electrical repairs, and water lines. The equipment will also be able to push, pull, pile, or load and unload materials such as sand, gravel, earth, coal, or refuse.

Incumbent operates and utilizes the following equipment and vehicles: John Deere 444J Heavy Duty Wheel Loader (plus attachments), Hyundai HL930AXT (plus attachments), JCB Telehandler, JLG ariel lift, Case 580 Backhoe, John Deere Tractor, Holder Model 259 Sidewalk Tractor, Trackless MT6 Sidewalk Tractor, New Holland Skid Steer (plus attachments), Z-spray Stand on sprayer ZS5260, Bobcat CT335 Tractor (plus attachments), Hustler 4400, 4600 and Z-series Industrial Lawn Cutting Tractors, other like rented equipment, pick-up trucks, vans, SUVs, and sedans.

Gardener Duties:
Incumbent performs a wide variety of duties involved in the development, care, and maintenance of trees, plants, shrubbery, recreational areas, and lawns. Throughout the season, the incumbent will clear brush, tree stumps, rocks and remove trees. Perform trimming, to hedges and shrubbery both for aesthetics, shaping and for good growing characteristics.

Utilizes stand on sprayers for fertilizing, pruning shears, chain saw, stump grinders, riding mowers, tractor, gasoline powered push mowers, gasoline string trimmers and vehicles with less than 8000 GVWR.

Motor Vehicle Operator Duties:
As a member of the Snow Emergency Response Team, incumbent performs snow removal from VAMC streets, sidewalks, and parking lots during by hand shoveling, snowblowers or with trucks, sidewalk plow, wheel loaders equipped with plow, bucket, pusher box and Hustler equipped with snow blower.

Works closely with Compensated Work Therapy (CWT) personnel performing grounds maintenance. Incumbent preforms safety inspections and preforms minor preventative maintenance on all equipment utilized and reports any repairs that incumbent could not accomplish to the Supervisor/Work Leader of the Transportation Team. As assigned, cleans and makes daily checks of fuel, oil, tires, hydraulic fluid, and battery of equipment to be utilized using the Pre-trip and post inspection log.

Operates a pressure washer, used to clean vehicles, various pieces of other heavy equipment, and areas such as sidewalks, brick, and stonework. Pressure washer is mounted on a stationary platform and is operated by a kerosene powered engine. Platform is moved by either pushing or pulling.

Incumbent drives pickup trucks, vans, SUVs, and sedans in accordance with station regulations and Wisconsin laws.

*Work Schedule: Full-time, Monday-Friday, 7:30 AM-4 PM and this position is considered emergency essential and may be required to work outside of his/her normal duty hours for snow emergencies and utility outages, maintenance and projects support, etc.

*The position is AWS eligible for 8-9 hr days, 1-8 hr day and one day off a pay period, the day off being a Tuesday, Wednesday or Thursday.

*Work requires a valid Class D driver's license. This license must be kept current.*Incumbent must obtain (within 90 days of hire) and possess a Wisconsin Department of Agriculture Trade and Consumer Protection Commercial Applicator of Pesticides License. This license must be kept current.

• Provides on-site technical assistance and training to field personnel in installation of conservation practices: parallel terraces, ponds, waterways, irrigation systems, agricultural waste mgmt systems, grass-based rotations, pasture planting, etc.
• Performs construction inspections on simple and complex structures for conservation systems. Performs drafting and other graphical work on a computer-aided drafting system and maintains they system equipment and supplies.
• Determines the type, scope and intensity of field investigations and surveys needed. Directs collection of field data and assures adequacy of collected data.
• Designs and supervises the design of complete engineering practices and structures. Prepares job sheets and designs. Prepares as-built plans. Prepares engineering cost estimates and construction performance time estimates.
• Completes payment requests and referrals pertaining to work completed for cost sharing. Documents layout and construction in conservation assistance notes or job diary.
• Selects and applies standard methods of computation for quantities such as concrete, earth fill and excavation. Develops standard drawings on the CAD system.
• Determines engineering training needs for field office personnel and provides training on surveying and engineering equipment.
• Provides instruction in the use of the National Engineering Manual, the Engineering Field Handbook, Agricultural Waste Manual Field Handbook, State Technical Guide, and various technical releases and handbooks.
• Coordinates quality reviews of conservation practices and checks engineering work of field office personnel.

• Tracking records of daily usage, fuel consumption and maintenance.
• Troubleshooting hydrographic survey equipment.
• Reviewing contracts to ensure compliance with environmental and safety laws and regulations.
• Processing data, video and imagery collected during missions.
• Responding to a wide range of inquiries from concerned citizens.
• Communicating with internal and external contacts to gain insight on survey projects.
• Monitoring data and channel conditions for safety.

Position Summary:  

 Field position requiring out of town travel majority of the time.  This position performs mechanical, electrical and/or controls/programming upgrades, modifications, repairs, maintenance, service, troubleshooting, startup, installation, supervision, audits, training, and support for packaging equipment.  This includes equipment manufactured by the AHC family of companies as well as non AHC OEM equipment.

Major Responsibilities: 

•Strong PLC (programable logic controller) knowledge and, in particular, all AB (Allen Bradley) platforms

• Skilled in setting up and troubleshooting AB (Allen-Bradley) servo systems, demonstrating expertise in working with advanced motion control technology.

• Strong foundation in electrical work, including reading and interpreting electrical schematics, troubleshooting electrical systems, and performing panel wiring.

• Proficiency in HMI (human-machine interface) programming, configuring, and operating user-friendly interfaces for industrial automation systems.

• Familiarity with safety light curtains, indicating an understanding of the use and integration of these devices for safeguarding personnel and machinery.

• Knowledge of Safety Relays and Safety Circuits, highlighting expertise in configuring and programming safety-related control systems.

• Possessing good mechanical knowledge and the ability to effectively use wrenches, showcasing competence in mechanical tasks and maintenance activities.

• Previous experience in the packaging industry would be a strong advantage, as it demonstrates familiarity with this sector's specific requirements and challenges.

• Experience with line controls would be beneficial, indicating proficiency in controlling and managing production lines in an industrial setting.

• Stay up to date on administrative responsibilities, including maintaining internal service records and manuals, customer service logs, accurate reporting (expense reports, project closure, timekeeping, etc.), and documenting work on Service Reports

• Fluent in Microsoft Word, Excel, and PowerPoint, highlighting proficiency in using these software tools for documentation, data analysis, and presentations.

Required Education / Experience / Skills:  

• Strong PLC (programable logic controller) knowledge and, in particular, all AB (Allen Bradley) platforms
• Skilled in setting up and troubleshooting AB (Allen-Bradley) servo systems, demonstrating expertise in working with advanced motion control technology.
• Strong foundation in electrical work, including reading and interpreting electrical schematics, troubleshooting electrical systems, and performing panel wiring.
• Proficiency in HMI (human-machine interface) programming, configuring, and operating user-friendly interfaces for industrial automation systems.
• Familiarity with safety light curtains, indicating an understanding of the use and integration of these devices for safeguarding personnel and machinery.
• Knowledge of Safety Relays and Safety Circuits, highlighting expertise in configuring and programming safety-related control systems.
• Possessing good mechanical knowledge and the ability to effectively use wrenches, showcasing competence in mechanical tasks and maintenance activities.
• Previous experience in the packaging industry would be a strong advantage, as it demonstrates familiarity with this sector's specific requirements and challenges.
• Experience with line controls would be beneficial, indicating proficiency in controlling and managing production lines in an industrial setting.
• Stay up to date on administrative responsibilities, including maintaining internal service records and manuals, customer service logs, accurate reporting (expense reports, project closure, timekeeping, etc.), and documenting work on Service Reports
• Fluent in Microsoft Word, Excel, and PowerPoint, highlighting proficiency in using these software tools for documentation, data analysis, and presentations.
• Physical stamina and strength to safely lift and move heavy equipment.
• Ability to perform repetitive motions and work in physically demanding positions for extended periods.
• Mobility to navigate diverse work environments, including climbing structures and accessing different areas.
• Agility and balance to move freely and safely within various locations.
• Capability to walk on uneven surfaces and maneuver through tight spaces.
• Frequent bending, kneeling, and standing as part of job requirements.

Benefits

• Medical, Dental, Vision and Prescription Drug Coverage

• Spending accounts (HSA, Health Care FSA and Dependent Care FSA)

• Paid Time Off and Holidays

• 401k Retirement Plan with Matching Employer Contributions

• Life and Accidental Death & Dismemberment (AD&D) Insurance

• Paid Leaves

• Tuition Assistance

About Regal Rexnord

Regal Rexnord Corporation (“Regal Rexnord”) is a leading manufacturer of electric motors, electrical motion controls, power generation and mechanical power transmission products and sub-systems, serving customers around the world in the general industrial, consumer, commercial construction, food & beverage, and alternative energy end markets, among others. Regal Rexnord sells its products and solutions to OEMs, through distributors, and directly to end-users. Regal Rexnord is a $7.2B company with 36,000 associates globally.

You may not know it, but Regal Rexnord impacts your life every day. The company’s products enable the fans in HVAC systems that keep us comfortable; the power source that keeps smart buildings running; the agricultural and food service equipment that keeps us fed; and the conveyer systems that keep e-commerce flowing, to name a few of the applications where our products are used.

Regal Rexnord’s business purpose is to create a better tomorrow by energy-efficiently converting power into motion. This means creating innovative solutions while focusing on both customer needs and the company’s commitment to sustainability.  The company’s industrial powertrain and automation solutions offerings are an important part of the company's growth strategy. The company’s strategy includes leveraging 80/20 to prioritize all activities, including product excellence, operational excellence and commercial excellence (i) driving organic sales growth through the introduction of innovative new products, with a particular focus on improving energy efficiency, (ii) establishing and maintaining new customers, as well as developing new opportunities with existing customers, (iii) participating in higher growth end markets and geographies, and (iv) identifying and consummating strategic, value creating acquisitions.
 

Equal Employment Opportunity Statement

Regal Rexnord is an Equal Opportunity and Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex/gender, sexual orientation, gender identity, age, ancestry, national origin, marital status, citizenship status (unless required by the applicable law or government contract), disability or protected veteran status or any other status or characteristic protected by law. Regal Rexnord is committed to a diverse and inclusive workforce. We are committed to building a team that represents diverse and inclusive backgrounds, perspectives, and skills. If you’d like to view a copy of the company’s affirmative action plan or policy statement, please email Recruiting@RegalRexnord.com.  If you have a disability and you believe you need a reasonable accommodation in order to search for a job opening or to submit an online application, please e-mail Recruiting@RegalRexnord.com.

Equal Employment Opportunity Posters

Notification to Agencies: Please note that Regal Rexnord Corporation and its affiliates and subsidiaries ("Regal Rexnord") do not accept unsolicited resumes or calls from third-party recruiters or employment agencies. In the absence of a signed Master Service Agreement or similar contract and approval from HR to submit resumes for a specific requisition, Regal Rexnord will not consider or approve payment to any third-parties for hires made.

The Specialty Components Group at Regal Rexnord is looking to employ an intern to support product testing, design, continuous improvement and corrective action projects as part of the engineering team. The primary responsibilities will be at the manufacturing site in Cudahy, WI.  Assignments will vary widely and only limited by your willingness and motivation to contribute.

Targeted candidates will have an interest in mechanical, electro-mechanical, electrical, materials, test or manufacturing engineering. Self-directed, action oriented, collaborators, learners and process-oriented enthusiasts are likely to have a rewarding experience. You should have at least one internship or significant team project experience as an intern or engineering student. Local candidates may have the option to work part time before summer and continue into the coming school year. We use Solidworks, National Instruments and Microsoft Office.

Minimum Qualifications:

• Must be pursuing an Engineering Bachelor’s or advanced degree from an accredited college or university (graduation date of December 2024 or after)
• Previous engineering internship experience preferred
• Minimum cumulative GPA of 2.75 or above

Benefits

• Medical, Dental, Vision and Prescription Drug Coverage

• Spending accounts (HSA, Health Care FSA and Dependent Care FSA)

• Paid Time Off and Holidays

• 401k Retirement Plan with Matching Employer Contributions

• Life and Accidental Death & Dismemberment (AD&D) Insurance

• Paid Leaves

• Tuition Assistance

About Regal Rexnord

Regal Rexnord Corporation (“Regal Rexnord”) is a leading manufacturer of electric motors, electrical motion controls, power generation and mechanical power transmission products and sub-systems, serving customers around the world in the general industrial, consumer, commercial construction, food & beverage, and alternative energy end markets, among others. Regal Rexnord sells its products and solutions to OEMs, through distributors, and directly to end-users. Regal Rexnord is a $7.2B company with 36,000 associates globally.

You may not know it, but Regal Rexnord impacts your life every day. The company’s products enable the fans in HVAC systems that keep us comfortable; the power source that keeps smart buildings running; the agricultural and food service equipment that keeps us fed; and the conveyer systems that keep e-commerce flowing, to name a few of the applications where our products are used.

Regal Rexnord’s business purpose is to create a better tomorrow by energy-efficiently converting power into motion. This means creating innovative solutions while focusing on both customer needs and the company’s commitment to sustainability.  The company’s industrial powertrain and automation solutions offerings are an important part of the company's growth strategy. The company’s strategy includes leveraging 80/20 to prioritize all activities, including product excellence, operational excellence and commercial excellence (i) driving organic sales growth through the introduction of innovative new products, with a particular focus on improving energy efficiency, (ii) establishing and maintaining new customers, as well as developing new opportunities with existing customers, (iii) participating in higher growth end markets and geographies, and (iv) identifying and consummating strategic, value creating acquisitions.
 

Equal Employment Opportunity Statement

Regal Rexnord is an Equal Opportunity and Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex/gender, sexual orientation, gender identity, age, ancestry, national origin, marital status, citizenship status (unless required by the applicable law or government contract), disability or protected veteran status or any other status or characteristic protected by law. Regal Rexnord is committed to a diverse and inclusive workforce. We are committed to building a team that represents diverse and inclusive backgrounds, perspectives, and skills. If you’d like to view a copy of the company’s affirmative action plan or policy statement, please email Recruiting@RegalRexnord.com.  If you have a disability and you believe you need a reasonable accommodation in order to search for a job opening or to submit an online application, please e-mail Recruiting@RegalRexnord.com.

Equal Employment Opportunity Posters

Notification to Agencies: Please note that Regal Rexnord Corporation and its affiliates and subsidiaries ("Regal Rexnord") do not accept unsolicited resumes or calls from third-party recruiters or employment agencies. In the absence of a signed Master Service Agreement or similar contract and approval from HR to submit resumes for a specific requisition, Regal Rexnord will not consider or approve payment to any third-parties for hires made.

The Specialty Components Group at Regal Rexnord is looking to employ a Manufacturing Engineering Intern to support product assembly, testing, and design; as well as continuous improvement and corrective action projects as part of the manufacturing engineering team.

The primary responsibilities will be at the manufacturing site in Cudahy, WI.  Assignments will vary widely and only limited by your willingness and motivation to contribute.  Self-directed, action oriented, collaborators, learners and process-oriented enthusiasts are likely to have a rewarding experience.

Qualifications

• Pursuing a degree in Industrial, Mechanical Engineering or advanced degree from an accredited college or university (graduation date of December 2024 or after)
• Working knowledge of Solidworks and Microsoft Office (Excel, Word, and Power Point)
• Minimum cumulative GPA of 2.75
• Excellent analytical, problem solving, and organizational skills
• Strong communication skills

Benefits

• Medical, Dental, Vision and Prescription Drug Coverage

• Spending accounts (HSA, Health Care FSA and Dependent Care FSA)

• Paid Time Off and Holidays

• 401k Retirement Plan with Matching Employer Contributions

• Life and Accidental Death & Dismemberment (AD&D) Insurance

• Paid Leaves

• Tuition Assistance

About Regal Rexnord

Regal Rexnord Corporation (“Regal Rexnord”) is a leading manufacturer of electric motors, electrical motion controls, power generation and mechanical power transmission products and sub-systems, serving customers around the world in the general industrial, consumer, commercial construction, food & beverage, and alternative energy end markets, among others. Regal Rexnord sells its products and solutions to OEMs, through distributors, and directly to end-users. Regal Rexnord is a $7.2B company with 36,000 associates globally.

You may not know it, but Regal Rexnord impacts your life every day. The company’s products enable the fans in HVAC systems that keep us comfortable; the power source that keeps smart buildings running; the agricultural and food service equipment that keeps us fed; and the conveyer systems that keep e-commerce flowing, to name a few of the applications where our products are used.

Regal Rexnord’s business purpose is to create a better tomorrow by energy-efficiently converting power into motion. This means creating innovative solutions while focusing on both customer needs and the company’s commitment to sustainability.  The company’s industrial powertrain and automation solutions offerings are an important part of the company's growth strategy. The company’s strategy includes leveraging 80/20 to prioritize all activities, including product excellence, operational excellence and commercial excellence (i) driving organic sales growth through the introduction of innovative new products, with a particular focus on improving energy efficiency, (ii) establishing and maintaining new customers, as well as developing new opportunities with existing customers, (iii) participating in higher growth end markets and geographies, and (iv) identifying and consummating strategic, value creating acquisitions.
 

Equal Employment Opportunity Statement

Regal Rexnord is an Equal Opportunity and Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex/gender, sexual orientation, gender identity, age, ancestry, national origin, marital status, citizenship status (unless required by the applicable law or government contract), disability or protected veteran status or any other status or characteristic protected by law. Regal Rexnord is committed to a diverse and inclusive workforce. We are committed to building a team that represents diverse and inclusive backgrounds, perspectives, and skills. If you’d like to view a copy of the company’s affirmative action plan or policy statement, please email Recruiting@RegalRexnord.com.  If you have a disability and you believe you need a reasonable accommodation in order to search for a job opening or to submit an online application, please e-mail Recruiting@RegalRexnord.com.

Equal Employment Opportunity Posters

Notification to Agencies: Please note that Regal Rexnord Corporation and its affiliates and subsidiaries ("Regal Rexnord") do not accept unsolicited resumes or calls from third-party recruiters or employment agencies. In the absence of a signed Master Service Agreement or similar contract and approval from HR to submit resumes for a specific requisition, Regal Rexnord will not consider or approve payment to any third-parties for hires made.