Total 359 maintenance repair job vacancies in usa hi fort shafter loop rd bldg 1547

• Performs simple and routine maintenance and repair of grounds, exterior structures, buildings, equipment, and related utilities.
• Assists higher graded maintenance workers or tradesmen in the performance of their work.
• Performs minor carpentry repairs using simple measures and hand tools on such tasks as replacing broken planks on picnic tables; broken windows using precut stock; minor adjustments or replaces hinges, latches, and catches.
• Performs minor painting using brush and roller according to specific instructions on projects where appearances are not critical such as staining picnic tables and trash barrels.
• Performs minor plumbing repairs such as tightening or replacing in-kind fittings and fixtures which do not require custom fitting or solder joints; replaces faucet washers; unplugs drains using a plunger; replaces liquid petroleum gas bottles.
• Receives, unloads and processes incoming shipments according to established procedures. Reports discrepancies and damage to others responsible for such items.
• Performs routine maintenance on campground sites and trails using hand tools to re-grade and reset barriers to restore areas to original appearances. Collects trash.
• Operates a light truck to pick up supplies and to transport materials to and from work sites while assisting on project work.
• Cleans and services chemical toilets, restrooms, and other campground or visitor facilities. Makes minor repairs as needed and refers problems to higher graded workers.
• Operates a forklift to load and unload supplies and light equipment not requiring special rigging.

This position is being re-advertised to solicit additional applications. Applicant who applied previously need not reapply unless submitting updated and/or missing information.

• Installs, modifies, maintains, and performs preventive maintenance on various plumbing systems.
• Installs, modifies, maintains, and performs preventive maintenance on various low voltage electrical systems.
• Installs, modifies, maintains, and performs preventive maintenance on HVAC systems.

• Read structural blueprints to perform repairs.
• Read blueprints to perform new structure construction.
• Use tools used in repairing dry wall.
• Use tools used in plumbing repairs.
• Construct wood structures such as floors and walls.
• Install basic electrical components such as outlet boxes.
• Use basic plumbing components.
• Cut accurate straight, angled, and curved cuts on wood products.
• Determine the layout of work sequences.
• Use T-Squares.

• Inspect a variety of thermostats, switches, flame safeguard controls, linkages, electrical and electronic safety devices.
• Perform maintenance on a variety of oil fired and gas fired furnaces.
• Inspect a variety of thermostats, switches, flame safeguard controls, linkages, electrical and electronic safety devices.
• Repair gas mains to include installation of new piping.
• Adjust heating plants for maximum efficiency, using test equipment such as CO2 tester, Testo Digital Combustion analyzer, monometer, and Honeywell systems tester.
• Remove, clean, adjust and replace nozzles, electrodes, strainers, filters, orifices, thermocouples and hot surface igniter unit.

The primary purpose of this position is to as an Air Reserve Technician (ART) officer position, to serve as an assistant to the Maintenance Group Commander and as such, reviews policy and assists the Senior ART/Maintenance Group (MXG) Commander in planning, organizing, coordinating, directing, and controlling all activities and operations of the Maintenance Group. Incumbent receives experience, training, and instruction in providing overall staff direction to all Maintenance Group programs.

RESPONSIBILITIES:
1. In conjunction with the MXG Senior Art/Commander plans, direct, organizes, manages, and provides oversight for activities in the Maintenance Group. Responsible to the Maintenance Group Senior ART/Commander in integrating, and executing all aspects of the assigned maintenance activities/programs within cost, schedule, performance and/or system supportability requirements.
2. Represents the Maintenance Group Commander at a variety of installation and functional area organizational meetings. Establishes, develops, and maintains effective working relationships with other group commanders, representatives and senior staff at Numbered Air Force, HQ AFRC, gaining MAJCOMs, and Air Staff.
3. Ensures effective operation of the aircraft maintenance complex. Make periodic and comprehensive assessment of program through a review of performance indicators, productivity goals and accomplishments, deficiency reports, audit findings, etc.
4. Accomplishes special staff studies, projects and initiatives resulting from legislative and regulatory changes, reengineering efforts, new technology, privatization, program/mission changes, etc. Identifies the need for studies, establishes goals and objectives, and designates working group(s) as needed.

• Plan and lay out work from blueprints, sketches, drawings, specifications, and work orders.
• Interpret and apply complex building plans to determine material, tools, and equipment needed Completes work from initial layout to final assembly.
• Apply a full range of carpentry methods in accomplishing complex tasks.
• Apply a full range of painting methods in accomplishing complex tasks.
• Prepare various surfaces of interior and exterior components of buildings.
• Mix, thin, blend, match, tint, and tone coating materials.

• Plan daily weekly and monthly work schedules and sequences of operations for subordinates.
• Establish deadlines and priorities on the basis of methods, and policies established by higher levels of supervision.
• Explain work requirements, instructing subordinates in new procedures and providing advice when problems arise.
• Investigate work related problems, such as low productivity, identify causes and implement corrective action within limits of authority.
• Develop and counsel employees on performance standards, implementing formal and informal performance appraisals.
• Determine supplies needed for planned projects and for repairs and/or upgrades to existing structures and grounds improvements.
• Train employees on safe work practices and the use of protective clothing and equipment.
• Ensure current information is provided to all employees regarding hazardous materials in the work environment.

• Incumbent works under the direction and reports to the Support Services Specialist. Receives, interprets, initiates, and processes maintenance requests for repairs or services.
• Coordinates the initial and long-term planning for the maintenance of all material and equipment utilized by the installation.
• Oversees a comprehensive preventive maintenance program and coordinates on-demand maintenance. Serves as warranty coordinator by monitoring and maintaining reports of equipment under warranty.
• Ensures the program performs within budgetary constraints with purchases, repair parts and supplies. Inspects and diagnoses equipment to make a determination on the best means to repair equipment.
• Coordinates appropriate course of actions for repairs. Identifies equipment to be salvaged or what disposition should be made.

• Provides technical guidance and oversight to technicians and operators in order to ensure, sustainment and successful Operation, Maintenance, and Repair (OMR).
• Provide services for horizontal and vertical infrastructures, such as Headquarters (HQ), Tactical Equipment Maintenance Facility (TEMF), UPH, Roads and Grounds, Tank Trails, firebreaks, and facilities alike.
• Directs small and large scale Sustainment, Restoration, and Modernization (SRM) construction projects to ensure code compliance.
• Manages team members to assist in the prevention, pre-suppression and suppression of woodland fires. Manages team members to assists with controlled burns, back burns and other activities necessary to control fires.
• Responsible for identifying, performing, and implementing the Directorate of Public Works (DPW’s) Deliberate Risk Management (DRM) program within assigned areas (shops) of supervision.
• Performs Deliberate Risk Assessments (DRA) in accordance with Army and Garrison policy.
• Advises and formally instructs employees on occupational safety and advanced safety programs, policies, procedures, and regulations.
• Complies with and supports the Army Safety Program as outlined in AR-385-10 and Fort Hood regulations.
• Plans weekly and monthly work schedules and sequence of operations for subordinates.
• Develops directives and policies consistent with the Commander's guidance and policies to ensure that mission requirements are met.
• Develops performance standards, counsels employees on performance, and makes formal and informal performance appraisals.
• The employee will drive a utility truck or similar vehicle to and from the work site in order to transport self, supplies and other employees.

As a SURFACE MAINTENANCE MECHANIC, WG-5801-10, you will troubleshoot, perform maintenance and major repairs on heavy-duty mobile equipment, combat, tactical, automotive vehicles; troubleshoot, repairs/overhauls major systems to include internal combustion engines, turbine engines, automatic, heavy duty drive line systems, hydraulic utility systems, controls; perform work in accordance with modification work orders, technical manuals, lubrication orders, maintenance bulletins, regulations or management policies; troubleshoot equipment; diagnose cause of mechanical failures by means of visual/auditory checks and/or use test equipment such as engine analyzers, compression testers, voltmeters, ohmmeters, pressure gauges, computer diagnostic tools; remove/ disassemble engines/major assemblies, sub-assemblies, components, fuel, hydraulic, oil pressure systems; make adjustments/ repairs to electrical/suspension systems; perform repairs, maintenance functions in remote locations by removing, cleaning, reinstalling, replacing defective parts of components and systems such as injectors, leaking wheel cylinders, corroded mufflers, fuel tanks, brake cylinders, worn brake shoes; provide technical guidance, specialized team leadership to lower grade employees within the team; assist lower grade mechanics in performing major repair work; assist higher graded mechanics in repairing interconnected systems such as electrical, air/hydraulic systems, complex state of the art electrical and electronic systems that use specialized diagnostic equipment to identify problems, complex fuel injection systems; similar complex systems; perform operational inspections ensures vehicles/ equipment are properly serviced, including brake adjustments, replacing hydraulic fluids, greasing, cleaning, and performs other preventive maintenance operations as required; inspect in-process repair work of lower graded repairer to ensure equipment is being repaired in accordance with requirements; maintain/repair electronics communication equipment by removing/ replacing components/elements; assist in the maintenance of production reports and records, make recommendations to supervisor as to adjustments necessary to effectively, efficiently and economically accomplish the work and maximize production; perform other duties as assigned.

• Performs a variety of trades and craft duties involving maintenance, repair and improvement of facilities.
• Assists in the maintenance and repair of the grounds; cuts grass, plants, trims hedges, trees and shrubbery.
• The incumbent may be required to operate a ½ Ton up to 1 Ton motor vehicle to and from worksite to transport material and personnel.
• Duties require the use of trade practices associated with carpentry, painting, and laboring work.
• Assists in the maintenance and repair of building exteriors.

• Spearhead formal and informal training to the organization.
• Maintain accountability of administrative actions.
• Review inventory of supply operations for discrepancies.
• Organize shop tools to distribute appropriately to employees.
• Prepare daily reports to monitor shop equipment database.

As a SURFACE MAINTENANCE REPAIRER-TITLE 32, WG-5801-8, you will troubleshoot, perform maintenance and major repairs on heavy-duty mobile equipment, combat, tactical and automotive vehicles. Troubleshoot, repair and overhaul major systems. Troubleshoot equipment and diagnose the cause of mechanical failures. Remove and disassemble engines and major assemblies, sub-assemblies, components, and systems. Independently perform repairs and maintenance functions by removing, cleaning, reinstalling, or replacing defective parts of components and systems. Conduct readiness and repair inspections on vehicles and equipment. Perform operational inspections and ensure vehicles and equipment are properly serviced. May maintain and repair equipment to include removing and replacing components and elements. Performs other duties as assigned.
A more comprehensive detailed description of the position may be found in Position Description PDD1193000 on file in the employing unit or in the Human Resources Office. Contact the KY HRO Staffing Section via email for additional information, ng.ky.kyarng.mbx.hro-technicianstaffing@army.mil.

1. (1) Troubleshoots, performs maintenance and major repairs on heavy-duty mobile equipment, combat, tactical and automotive vehicles. This may include self-propelled artillery, tracked cargo and personnel carriers, road graders, mobile cranes, front loaders, conveyors, bulldozers, power shovels, compressors, generators, tanks, tracked combat vehicles, sedans, buses, all terrain vehicles, trucks, semi trailers, forklifts, tractors, and accessory equipment. Troubleshoots, repairs and overhauls major systems to include internal combustion engines, turbine engines, automatic and non-automatic transmissions, heavy duty drive line systems, and hydraulic utility systems and controls. Makes repairs to assemblies and components such as voltage regulators, generators/alternators, brake cylinders, etc. Performs work in accordance with modification work orders, technical manuals, lubrication orders, maintenance bulletins, regulations or management policies. May repair a variety of more complex major systems to include engines, cross drive or similar multi-system transmissions and a variety of intricate fuel injection systems.
2. Troubleshoots equipment and diagnoses the cause of mechanical failures by means of visual and auditory checks and/or uses test equipment such as engine analyzers, compression testers, voltmeters, ohmmeters, pressure gauges, and computer diagnostic tools. Utilizes embedded diagnostics in equipment and a wide variety of original equipment manufacturer system analyzers in order to determine the exact nature or extent of repair. Determines what adjustments may be necessary to complete work orders, and whether any additional repairs other than those specified or indicated on the work order are necessary.
3. Removes and disassembles engines and major assemblies, sub-assemblies, components, and fuel, hydraulic, and oil pressure systems. Makes the appropriate repairs, overhaul, or modifications in accordance with the proper repair specifications and procedures. Reassembles engines and other systems, and adjusts, tests, and reinstalls in vehicles and equipment as necessary. Makes adjustments and repairs to electrical and suspension systems. May install pistons, sleeves, rings, bearings, rods, crankshafts, timing gears, and rocker arms. May be required to perform fuel injection equipment repair, overhaul, rebuild, and calibration duties utilizing a variety of complex test and calibration equipment.
4. Independently performs repairs and maintenance functions in remote locations that can be accomplished by removing, cleaning, reinstalling, or replacing defective parts of components and systems such as injectors, leaking wheel cylinders, corroded mufflers, fuel tanks, brake cylinders and worn brake shoes, voltage regulators, generators, injector pumps, and fuel pumps. Provides technical guidance and specialized team leadership to lower grade employees within the team. Assists lower grade mechanics in performing major repair work. May provide Field and limited Sustainment maintenance at unit locations as part of a "contact team." Recovers and evacuates inoperable vehicles from the unit location of breakdown. May assist higher graded mechanics in repairing a variety of interconnected systems such as electrical, air and hydraulic systems, complex state of the art electrical and electronic systems that use specialized diagnostic equipment to identify problems, complex fuel injection systems and other similar complex systems.
5. Conducts readiness and repair inspections on vehicles and associated equipment supported by the activity. Performs operational inspections and ensures vehicles and equipment are properly serviced, including brake adjustments, replacing hydraulic fluids, greasing, cleaning, etc., and performs other preventive maintenance operations as required. Inspects supported equipment prior to use during Inactive Duty Training (IDT) and Annual Training (AT), to ensure that it is functioning properly. May inspect in-process repair work of lower graded repairer to ensure equipment is being repaired in accordance with pertinent requirements. May serve as a commodity inspector during Command Maintenance Management evaluations (COMET) or as a member of a Maintenance Assistance Instruction Team (MAIT). Instructs operator/crew in the maintenance of equipment and provides technical advice and assistance to supported units when requested.
6. May maintain and repair electronics communication equipment by removing and replacing components and elements. Equipment includes such items as radios, field telephones, amplifiers, switchboards, recorders, intercoms.
7. Performs other duties as assigned.

As a SURFACE MAINTENANCE MECHANIC-TITLE 32, WG-5801-10, you will troubleshoot, perform maintenance and major repairs on heavy-duty mobile equipment, combat, tactical and automotive vehicles. Troubleshoot, repair and overhaul major systems. Troubleshoot equipment and diagnose the cause of mechanical failures. Remove and disassemble engines and major assemblies, sub-assemblies, components, and systems. Independently perform repairs and maintenance functions by removing, cleaning, reinstalling, or replacing defective parts of components and systems. Conduct readiness and repair inspections on vehicles and equipment. Perform operational inspections and ensure vehicles and equipment are properly serviced. May maintain and repair equipment to include removing and replacing components and elements. Perform other duties as assigned.
A more comprehensive detailed description of the position may be found in Position Description PDD1194000 on file in the employing unit or in the Human Resources Office. Contact the KY HRO Staffing Section via email for additional information, ng.ky.kyarng.mbx.hro-technicianstaffing@army.mil.