Total 179 maintenance repair job vacancies in buffalo new york

As a Maintenance Mechanic WG-4749-10, your typical work assignments may include the following under supervision:

• Independently apply skilled methods, techniques, and advanced shop mathematics to construct, install, repair, and modify a wide variety of structures. Works on projects such as building frames, rafters, concrete forms, walls, staircases, door and window frames, interior and exterior trim, and other miscellaneous items.
• Utilize safety practices and procedures following established safety rules and regulations and maintains a safe and clean work environment. Uses and maintains tools and equipment.
• Perform masonry tasks involved in the maintenance, repair, alteration, and construction of interior and exterior surfaces and structures. Lays bricks, firebricks, cement/glass blocks, tile, terra cotta, and artificial and natural stones.
• Plan and lays out work from blueprints, sketches, drawings, specifications, and work orders in the construction and maintenance of installation facilities. Reviews work order requirements reflecting structures to be constructed, installed, modified, altered, or repaired.
• Develop patterns, cuts, forms, joins, assembles, and installs items and systems which have combined straight and curved edges or irregular curves, angles, and planes. Uses complicated shop mathematics to calculate irregular curves, angles, and pitch. Applies principles of radial-line development combined with parallel-line development to devise and calculate patterns.

Do you want to learn a specialist trade in construction with fantastic career progression and earning potential? Do you want to earn whilst you learn? This Trainee Cosmetic Repair Technician role could be for you!

This is an opportunity to work for an established and well-respected family run construction company based in Caldicott, Monmouthshire with over 40 years of pedigree. It has steadily grown to be one of largest sealants specialists in the UK with seven offices across England, Scotland, and Wales.

Cosmetic repair is a specialist construction trade. Skilled Cosmetic Repair Technicians can repair several different surfaces such as: ceramic, metal, wood, and glass so that expensive items can be repaired and made to look as good as new rather than being replaced.

The process involves great attention and eye for detail. Work can be intricate and often requires persistence and patience. Workers with this skill are in demand and enjoy excellent earnings as well as career progression.

The role:

* Successful applicants will be enrolled onto an internal training programme from day one as a Trainee Cosmetic Repair Technician. This will involve training in the company's dedicated training facility initially before moving on to site.
* You will work alongside an established trade person to develop your Cosmetic Repair Technician skills in a hands-on environment.
* Helping to prepare and make safe workspaces.
* A variety to your working day, every site will offer you the chance to develop different skills.
* This role is full time working Monday to Friday approximately 8am - 4.30pm.

This opportunity offers fantastic career progression and salary increases upon successful completion of training.

This role offers a huge chance for a long-term career.

Previous construction experience is not essential. Anyone with an excellent eye for colour matching and detail will find they enjoy this work. It is an extremely rewarding job to bring items back to life.

Essential skills:

* Full UK driving licence.
* No previous experience necessary.
* Interested in learning and progressing in a construction trade.
* Willing to learn.
* Conscientious.
* Eye for detail and colour.

Apply online with your CV attached or call Acorn Recruitment on 07825857270

Acorn by Synergie acts as an employment agency for permanent recruitment.

Proud member of the Disability Confident employer scheme

1.Responsible for the coordination and management of the operation and maintenance team, including network/hardware planning management, basic operation and maintenance, database operation and maintenance, application operation and maintenance, operation and maintenance platform, etc.;

2. Establish and improve standardized operation and maintenance systems, processes, management strategies and security strategies to ensure the quality of operation and maintenance;

3. Responsible for the deployment and daily maintenance and management of the company's operation and maintenance systems to ensure the normal operation and emergency response of the operation system;

4. Ensure the safety of operation and maintenance of the department, handle operation and maintenance accidents, optimize various maintenance workflows, and continuously reduce system risks;

5. Responsible for the management of the operation and maintenance team, the improvement of employees' work skills, etc.

As an AIRCRAFT MAINTENANCE SUPERVISOR, WS-8801-14, you will:

• Resolve grievances and ensures proper corrective action is taken
• Recommend promotion or reassignment of subordinate supervisors
• Readiness evaluations, inspections, and command support exercises
• Plan the overall allocation of personnel, funding, and equipment resources
• Ensure that subordinates wear appropriate safety equipment and follow safety precautions

GS-2181-12:

(1) Performs maintenance operational checks (MOC)and limited and general test flights of aircraft to ensure airworthiness upon completion of extensive disassembly for maintenance, repair, replacement or modification of components or aircraft systems.

Performs general or limited test flights including test flights of aircraft when ground diagnostic tests cannot determine the safe and/or proper functioning of aircraft components or systems.

Performs acceptance test flights of new aircraft when required. Assignments may include instruction to and evaluation of maintenance test pilots.

(2) Plans and directs the quality control management program of the AASF. Does immediate and long-range planning for all matters pertaining to quality control at the facility. Plans and establishes quality control operations and procedures for the application of Modification Work Orders (MWO) and Technical Bulletins (TBs) and assures that instructions are followed on all the aircraft supported by the installation. Answers correspondence, prepares reports and furnishes advice and assistance pertaining to quality control matters to supervisors, shop foremen and other
members of the organization. Ensures that Quality Deficiency Reports (QDRs) are initiated and forwarded when equipment fails, deficiencies are discovered in newly received equipment or equipment improvements are proposed. Serves as point of contact for the AASF in communications between the facility and the labs in the Army Oil Analysis Program (AOAP) and oversees the local aspects of the program. Inspects shop facilities, management practices , fire prevention plans, ventilation systems, lighting systems and aircraft and equipment records to assure proper shop and flight-line safety for personnel and equipment in the maintenance area of operations. Advises and makes recommendations to the Facility Commander on quality control matters.

(3) Exercises supervisory responsibility over 3 to 8 subordinate workers engaged in technical inspection of the aircraft.

Accomplishes performance ratings, authorizes and approves leave requests for assigned personnel. Interviews and recommends applicants for vacant positions within area of responsibility and orientates new employees. Informs subordinates on features of personnel management and employee relations such as the appeal and grievance rights and basis for position classification actions.
Exercises overall technical responsibility for the performance of subordinate workers in such endeavors as precision measuring and test equipment calibration and certification, maintenance of the technical publications library, taking samples for the AOAP, inspection of aircraft maintenance work for conformance to established quality standards, and conducting tear-down inspection to determine causes of deficiencies.

(4) Performs other duties as assigned.

As a SURFACE MAINTENANCE MECHANIC SUPERVISOR, WS-5801-11, you will:

• Plan use of subordinate workers, equipment, facilities, and materials on a week-to-week or month-to-month basis.
• Coordinate work with supporting or related work functions controlled by other supervisors.
• Assigns tasks to be performed based on readiness and explains work requirements, methods, and procedures.
• Ensure equipment repairs do not exceed maintenance expenditure limits in accordance as established by regulation and or policies.
• Perform non-supervisory work, such as, transporting equipment, performing maintenance tasks, etc.
• Develop, publish, and ensure employee compliance with standing operating procedures for the activity supervised.
• Ensure the employees wear appropriate safety equipment and follow pertinent safety precautions.
• Prepare for and participates in various types of readiness evaluations, inspections, mobilization and command support exercises.
• Performs other duties as assigned.