Total 1,271 Transportation / Logistics job vacancies in Middlesbrough, North Yorkshire, ts176aw

The incumbent will have knowledge of the processes for Reusable Medical Equipment (RME) as required by this position. The incumbent will be required to maintain current knowledge of the Standard Operating
Procedures (SOPs) which document the processes and procedures for cleaning, disinfection, sterilization and preparation of RME appropriate to this position. The incumbent will be able to demonstrate their ability to utilize an acceptable proficiency in the use of RME appropriate to this position.

This is a developmental performance level position in Sterile Processing Service as a Medical Supply Technician (Sterile Processing Technician). In this position, the incumbent will provide sterilization, preparation, supply items and reusable medical equipment decontamination and distribution support for the medical center. The term supply item refers to disposable and reusable items for patient care including instrumentation (scissors, forceps, retractors, etc.), reusable medical equipment (suction machines infusion pumps, etc.), surgical trays and sets and various other items that could be processed or assembled through the Preparation and Decontamination areas of Sterile Processing Service.

This is a developmental performance level MST position. Receives contaminated critical and semi-critical RME in decontamination area and may receive noncritical equipment in the decontamination area as well.
Disassembles the RME and determines the correct cleaning method, such as but not limited to ultrasonic cleaners, mechanical washers, cart washers and chemical cleaning/decontamination agents as determined by manufactures instructions. Inspects, prepares, assembles and determines the correct method and packaging for sterilization such as but not limited to steam, Sterrad, Steris, EtO and high-level disinfecting reprocess or, may processors, may prepare operating room case carts utilizing surgery schedule. Removes soil, blood, tissues fragments, body fluids and other contaminants by wiping, soaking, rinsing and scrubbing.

Inspects packages for indications of proper sterilization, assembles basic sets and trays used throughout the medical center including those used in the operating room. Performs segments of work pertaining to the decontamination, sterilization and inspection of reusable medical equipment (RME). Completes segments of work pertaining to the assembly of basic sets and trays for use in the medical center. Operates equipment involved in sterilization processes. May be required to prepare operating room case carts. Performs and documents daily operational checks and records for all sterilization equipment. MSTs
receive guidance from more experienced staff members and SPS management.

Preferred Qualifications
Hospital Experience in Sterile Processing and Decontamination

Preferred Certification(s)
SPD Technician Certification.


Work Schedule: 8 - hour tours between the hours of 0730 and 2000
Telework: No
Virtual: This is not a virtual position.

The incumbent will have knowledge of the processes for Reusable Medical Equipment (RME) as required by this position. The incumbent will be required to maintain current knowledge of the Standard Operating
Procedures (SOPs) which document the processes and procedures for cleaning, disinfection, sterilization and preparation of RME appropriate to this position. The incumbent will be able to demonstrate their ability to utilize an acceptable proficiency in the use of RME appropriate to this position.

This is a developmental performance level position in Sterile Processing Service as a Medical Supply Technician (Sterile Processing Technician). In this position, the incumbent will provide sterilization, preparation, supply items and reusable medical equipment decontamination and distribution support for the medical center. The term supply item refers to disposable and reusable items for patient care including instrumentation (scissors, forceps, retractors, etc.), reusable medical equipment (suction machines infusion pumps, etc.), surgical trays and sets and various other items that could be processed or assembled through the Preparation and Decontamination areas of Sterile Processing Service.

This is a developmental performance level MST position. Receives contaminated critical and semi-critical RME in decontamination area and may receive noncritical equipment in the decontamination area as well.
Disassembles the RME and determines the correct cleaning method, such as but not limited to ultrasonic cleaners, mechanical washers, cart washers and chemical cleaning/decontamination agents as determined by manufactures instructions. Inspects, prepares, assembles and determines the correct method and packaging for sterilization such as but not limited to steam, Sterrad, Steris, EtO and high-level disinfecting reprocess or, may processors, may prepare operating room case carts utilizing surgery schedule. Removes soil, blood, tissues fragments, body fluids and other contaminants by wiping, soaking, rinsing and scrubbing.

Inspects packages for indications of proper sterilization, assembles basic sets and trays used throughout the medical center including those used in the operating room. Performs segments of work pertaining to the decontamination, sterilization and inspection of reusable medical equipment (RME). Completes segments of work pertaining to the assembly of basic sets and trays for use in the medical center. Operates equipment involved in sterilization processes. May be required to prepare operating room case carts. Performs and documents daily operational checks and records for all sterilization equipment. MSTs
receive guidance from more experienced staff members and SPS management.

Preferred Qualifications
Hospital Experience in Sterile Processing and Decontamination

Preferred Certification(s)
SPD Technician Certification.


Work Schedule: 8 - hour tours between the hours of 0730 and 2000
Telework: No
Virtual: This is not a virtual position.

The Primary Purpose of this position is: to serve as an Air Reserve Technician (ART) performing such duties as removing, installing, adjusting, aligning, inspecting, troubleshooting, and performing final functional and operational tests on a variety of major aircraft systems, their assemblies, and components such as airframe, landing gear, power plant, gear boxes, pumps, and hydraulic, pressurization, utility, fuel, oil, pneumatic, and flight control systems and to provide training to reservists in the accomplishment of tasks set forth herein.

Duty 1. Performs inspection and troubleshooting on a variety of aircraft systems, their assemblies, and components in accordance with applicable technical orders/commercial manuals (C40 only) and specifications.
Duty 2: Positions, maintains, disassembles, repairs, and reassembles aircraft systems, their assemblies, and components in accordance with applicable technical orders and specifications.
Duty 3: Accomplishes aircraft maintenance and equipment record keeping, both manual and automated, associated with aircraft maintenance and repair.
Duty 4: Utilizes safety practices and procedures following established safety rules and regulations, and maintains a safe and clean work area.
Duty 5: Verifies and certifies work processes and procedures and adequacy of work accomplished by certified co-workers and trainees.

• Provide mail operation information at service window using customer service procedures.
• Knowledge of security regulations and procedures pertaining to handling sensitive materials.
• Drive a motor vehicle up to 1 1/2 tons.
• Route personal and official mail to various units, box numbers, organization, and places.
• Perform related mail handling and clerical duties through the applicable postal regulations, procedures, manuals and directives.
• Maintain database by inputting, modifying, and retrieving data on personnel.

The primary purpose of this position is: to serve as an Air Reserve Technician (ART) performing such duties as removing, installing, adjusting, aligning, inspecting, troubleshooting, and performing final functional and operational tests on a variety of major aircraft systems, their assemblies, and components such as airframe, landing gear, power plant, gear boxes, pumps, and hydraulic, pressurization, utility, fuel, oil, pneumatic, and flight control systems and to provide training to reservists in the accomplishment of tasks set forth herein.

DUTIES:
1.Performs inspection and troubleshooting on a variety of aircraft systems, their assemblies, and components in accordance with applicable technical orders/commercial manuals (C40 only) and specifications.
2.Positions, maintains, disassembles, repairs, and reassembles aircraft systems, their assemblies, and components in accordance with applicable technical orders and specifications.
3.Accomplishes aircraft maintenance and equipment record keeping, both manual and automated, associated with aircraft maintenance and repair.
4.Utilizes safety practices and procedures following established safety rules and regulations, and maintains a safe and clean work area.
5.Verifies and certifies work processes and procedures and adequacy of work accomplished by certified co-workers and trainees

1. Observes, documents, and evaluates carrier and contractor performance. Inspects contractor's performance at owner's residence and at warehouse during packing, crating, loading, shipping, unloading, uncrating and unpacking.
2. Counsels members regarding policies and procedures for the proper preparation of personal property for shipment and/or storage, including specialized items, to domestic and overseas locations.
3. Prepares documentation reporting carrier performance using automated systems. Observes, documents, and evaluates performance of contractor on packing, containerization, and local drayage of personal property.
4. Provides oversight of the Direct Procurement Method (DPM) contract. Serves as a Quality Assurance Evaluator (QAE), functionally qualified to ensure the Air Force receives quality contractor performed services and pays only for acceptable services received.

This Supervisory Transportation Security Officer position is located at Fayetteville Regional Airport (FAY), Transportation Security Administration, Department of Homeland Security (DHS). As a Supervisory Transportation Security Officer (STSO), you will be responsible for mitigating actual and potential threats against civil aviation and other transportation modes. You will also perform and supervise in your area of specialty, which may include Transportation Security Officers (TSOs) and Lead Transportation Security Officers (LTSOs) in the performance of all security functions related to the screening of people, property, and cargo through the use and application of procedures, techniques, and technology. In addition, you will make independent, security-based decisions using intelligence, critical thinking, experience, observation, and passenger engagement. Typical duties include, but are not limited to:

• Conducting and supervising subordinate employees in conducting pre-board security screening of persons, their carry-on and checked baggage/cargo.
• Overseeing screening checkpoint(s) and/or baggage screening operations on a day-to-day basis to include equipment, personnel, and the scheduling and rotation of personnel.
• Participating in the development of new policies and procedures, and recommending changes in policy and procedures based on observation of work, as required.
• Participating in the development of strategic planning initiatives, workforce planning, succession planning initiatives, and other reports and documents for TSA and superiors.
• Engaging in continuous development of critical thinking skills necessary to mitigate security threats by identifying, evaluating, and applying appropriate situational options and approaches.
• Preparing various types of communications such as morning briefings, checkpoint logs, reports, and documents that are germane to the work performed.
• Developing incident information and reports for Law Enforcement Officers (LEOs) and superiors.
• Serving as a member of the National Screening Force.

The primary purpose of this position is: To perform aircraft structural maintenance and support equipment repair for tasks associated with the planning, laying out, fabricating, modifying, repairing, assembling, corrosion control, specialized coatings, advanced composites, tubing, and installing sheet metal parts, items, and assemblies and to provide training to reservists in the accomplishment of tasks herein.

DUTIES:
1: IAW technical data and standards: Plans and lays out work from engineering data, blueprints, sketches, drawings, specifications, and work orders in the repair, coating, or manufacture of aircraft structural components and support equipment.
2: IAW technical data and standards: Develops patterns, molds, cuts, forms, joins, assembles, and installs items and systems which have combined straight and curved edges or irregular curves, angles, and planes.
3: Operates, cleans, maintains, and accounts for all hand, power tools and equipment, such as slip roll forming machines, box and pan brakes, beading and tubing machines to fabricate and repair items. Utilizes safety practices, Federal Environmental Protection Agency (EPA) and AF Environmental Compliance Assessment Management Program (ECAMP) environmental protection practices and procedures and complies with security regulations, directives and policies.
4: Inspects, prepares aircraft and support equipment surfaces and applies a variety of chemical compounds, protective and specialized coatings to a variety of materials, such as sheet metal, radomes, and composites then correctly disposes of hazardous waste products.
5: Repairs, modifies, and manufactures fiberglass, bonded honeycomb, and composite/metal structural components that have contours that must be reestablished or that require the manufacture of a mold using the available part or pattern. Prepares effective training plans to maximize Reserve training.

- Receives work document(s) or oral instructions regarding problem with aircraft fuel system

- Troubleshoots integral fuel tanks, using leak path analysis and other test procedures such as pressure checks, vacuum checks, dye injection checks, helium and argon gas checks, etc., to determine the source of fuel leaks

- Troubleshoots integral and body fuel tanks to determine location of leaks

- Accomplishes modifications and prepares components for storage or shipment. In performing duties uses a variety of common hand tools, combustible and toxic gas indicators, torque wrenches, leak detectors, pressure gauges, manometers, powered tools such as drills and pneumatic wrenches; also, operates AGE such as blowers, filters, vacuum cleaners, heaters, air conditioners, fire extinguishers, etc.

- Utilizes safety practices and procedures following established safety rules and regulations and maintains a safe and clean work area

This Lead Transportation Security Officer position is located at Raleigh-Durham International Airport (RDU), Transportation Security Administration, Department of Homeland Security (DHS). As a Lead Transportation Security Officer (LTSO), you will be responsible for leading at least three full-performance level Transportation Security Officers (TSOs) and, as assigned, trainee and apprentice level TSOs. As an LTSO, you will identify, distribute, and balance workloads and tasks among employees in accordance with established workflow and skill level. You will make adjustments to accomplish the workload in accordance with established priorities. Duties include but are not limited to:

• Providing input to supervisors and managers concerning a variety of human resources matters including, but not limited to, employee performance, promotions, reassignments, awards, etc.
• Implementing security screening procedures in accordance with TSA objectives and directives.
• Assisting with investigations of incidents, and preparing incident reports or other documents that convey required information.
• Responding to breaches of security and emergency situations.
• Training team members, monitoring and reporting on the status and progress of work, and representing the team in communications with the supervisor or manager for the purpose of obtaining resources (e.g., computer hardware and software, etc.).

Support Worker

Search Health-care are working with a Nationally Recognised Health-care Provider to source a number of experienced support workers for a Harrogate based Supported Living service to provide support to vulnerable service users that need supporting in their daily life to life routine.

The Role:
The emphasis of this job will be working on You will be supporting individuals with severe mental health difficulties / learning disabiltiies/ You will be expected to work flexible shifts.The ideal candidate will have at least 6 months previous experience working as support worker with previous experience with mental health / learning difficulties. We are particularly interested to hear from candidates who have previously completed MAPA/PMVA training. You will be expected to work regular weekend shifts.

What we are looking for in you:
* Passionate about helping others and have the ability to support and encourage people to achieve their full potential.
* Commitment to ensure that people with disabilities are valued and enabled to take control of their own lives.
* You are looking to build a fulfilling and rewarding career in social care, truly making a difference to the lives of those who you support.
* You have at least 6 months experience in the mental health sector and are able to provide
2 years of employment referencing
* Have MAPA or PMVA training (Not essential)

• Must have driving license (Essential)

Benefits:

Flexibility to base your work around existing commitments

Competitive hourly rates of pay as well as holiday entitlement
Free DBS check
Free Uniform

If you have the above experience, please contact us asap on 0113 308 8026 to register your details, or send us your CV to If Leah.Stoddart@search.co.uk you meet the relevant criteria, you will be invited to attend an interview.

Search is an equal opportunities recruiter and we welcome applications from all suitably skilled or qualified applicants, regardless of their race, sex, disability, religion/beliefs, sexual orientation or age.

We have fantastic flexible opportunities for HGV Class 2 Drivers in Motherwell, ML1 4XJ.

HGV Class 2 Driver pay rate:

You will be paid £14.11 per hour

HGV Class 2 Driver working hours:

We have Day/Back and night driver positions available for this role.

HGV Class 2 Driver role:

Our HGV Class 2 drivers work on shifts, safely transporting our palletised parcels to Couriers or collecting from Delivery Units (that's where our couriers pick them up). You will typically have a run with 4 - 5 drops ensuring the safe, efficient driving of vehicles and keeping the paperwork updated.

What we are looking for in a successful candidate:

• You will need a full UK driving licence with HGV Class 2 (Cat C) entitlements, driver's CPC and digital tachograph.
• Newly qualified drivers are welcome; however, all drivers will need to undertake a short driving assessment.
• Excellent communication skills
• A safety-first mindset
• Reasonable physical fitness

If you have a strong work ethic and want to be part of a hardworking logistics team, then apply today!

Challenge-trg Recruitment Ltd is acting as an employment business in relation to this vacancy