Total 162 Quality Assurance / Control job vacancies in Houston, Texas, USA

1. This position will support the Federal Government's response efforts to COVID-19.
2. Conducts an information program to elicit support and involvement in fire prevention, detection, and suppression. Performs regular and periodic fire protection inspections for all areas of the installation where the potential severity and expectancy for fire is high and involves hazards that are difficult to recognize and, once identified, require advanced or innovative methods to reduce or eliminate them.
4. Inspects, tests, and corrects deficiencies on a variety of fire protection systems, many of which are complex or designed for a specific operation or hazardous condition, (e.g., carbon dioxide cascade systems, halon total flood systems, heat rise detection systems, and interlock systems).
4. Reviews engineering plans and specifications for new construction, alteration, and extension of existing structures. Develops and maintains a variety of documentation such as fire prevention inspection schedules and facilities jackets on assigned facilities.
5. Complies with health, safety, and environmental rules and procedures and performs work in a manner that enhances the safety of the work environment.

Assures on a continuing basis that facilities are properly and adequately organized, staffed, and equipped; have and conduct an adequate training program, including an acceptable record keeping system; and have facilities and procedures that meet all regulatory requirements. Chairs joint FAA-industry meetings; maintains regular contact with organizations assigned; and coordinates with top management officials. Requires or directs correction of any deficiencies/discrepancies and refuses or withdraws approval if they cannot be resolved.

Develops maintenance program requirements through participation on Maintenance Review Boards. Coordinates Minimum Equipment List (MEL) approvals with the principal operations inspector. Takes enforcement action in
instances of noncompliance with the MEL.

Evaluates requests to operate under conditions not previously specified in the maintenance portion of the operations specifications and approves or disapproves. requests and provides additional conditions and limitations as needed.

Directs the inspection and surveillance of the air carrier's continuous airworthiness maintenance program. Monitors all phases of the air carrier's maintenance operation, including the following: maintenance, engineering quality control, production control, training, and reliability programs. Analyzes trends to detect. a deterioration in the maintenance program.

Analyzes reports submitted by the air carrier to ensure compliance with the maintenance program and assures the air carrier has an effective continuing analysis and surveillance program to meet the requirements of the FARs.

WHAT IS THE TAXPAYER SERVICES (TS) DIVISION?
A description of the business units can be found at: https://www.jobs.irs.gov/about/who/business-divisions

Vacancies will be filled in the following specialty areas: Return Integrity and Compliance Services ¦ Refundable Credits Examination Operation.

The following are the duties of this position at the full working level.

• Plans and conducts independent examinations and related investigations of a variety of individual and business taxpayers involving complex tax issues and accounting records and typical methods.
• Classifies and screens individual and business tax returns and allowance cases showing changes in tax liability and selects those which have the highest potential for audit.
• Classifies returns received as the result of transfers, special handling requirements, or collateral requests.
• Reviews collection and criminal investigation referrals for examination potential.
• Provides technical support and training as a coordinator of programs between compliance and other departments within the Internal Revenue Service.

Directs a highly technical workforce, including functionally integrated teams of operational and support personnel, that provides air traffic control services throughout a geographic area. The work impacts the safe, orderly. and expeditious movement of aircraft as well as segments of the aviation industry. Continuously reviews work processes to assure that results meet the agency's mission and the customer's needs, add value to facility services, and are efficiently achieved. Provides training, coaching, and guidance to subordinates, and is responsible for team building throughout the facility. Plans work to be accomplished by subordinates. Sets and adjusts long and short-term priorities. Approves leave; prepares schedules for completion of work; assigns work to subordinates based on priorities; evaluates work performance of subordinates ensuring equity of performance standards and ratings; gives advice on work and on administrative matters; makes decisions on work problems presented by subordinates; hears and resolves group grievances and serious employee complaints; effects disciplinary actions; recommends/approves selections and transfers; recommends awards or bonuses; approves expenses for overtime, equipment, and personnel within the facility; and identifies and arranges for developmental and other training needs of subordinates. Communicates and reinforces EEO policies and programs in all areas of responsibilities including selection, training, and transfers. Supports and participates in the labor management partnership process and fosters a work environment where all employees are treated in a fair and equitable manner. Meets or has contact with high ranking military and civilian managers, representatives of the aviation industry. key staff of public interest groups, union representatives, local government managers, professional organizations, and contractors.

The primary purpose of this position is: To ensure quality characteristics are met for product quality verification on aircraft, systems, and products. Also to provide effective and comprehensive oversight and management of a government contract program located in the 301st Fighter Wing.

• Develops and implements a structured and systematic quality assurance surveillance program for all facets of integrated logistics support, providing maintenance managers with the assurance that propulsion system contractors, fleet maintainers, fleet operators, program office engineers and logisticians, and airworthiness authority delegates adhere to customer required specifications in technical, safety, deliverables, and reporting directives
• Consolidates data collection processes for clear and concise reporting, utilized by all levels in the management chain for evaluation, inspection, and audit programs. Independently evaluates the results and, where necessary, recommends the most appropriate corrective action to command level management
• Reviews aircraft field sustainment repairs and maintenance, gathers metrics and prepares reports to initiate corrective action if results indicate contract standards or performance requirements are not met
• Identifies and documents vulnerabilities within the inspection and acceptance of supplies/service to ensure safety of flight

Supervises staff of Air Traffic Control Specialists that is responsible for carrying out air traffic control assignments.

Plans and assigns work to be accomplished by subordinate employees. Sets work priorities and schedules. Approves leave; gives counsel, and instruction to employees on both work and administrative matters. Evaluates performance of employees and performance ratings. Hears and resolves complaints from employees and refers group grievances and more serious complaints to a higher-level manager. Identifies and arranges for developmental and other training needs of employees. Finds ways improve production or increase the quality of the work directed. Adjusts staffing levels and work procedures to accommodate decisions made at higher levels. Recommends goals and objectives for the area and tracks.

Communicates and reinforces diversity and EEO policies and programs in all areas of responsibility, including selections, training, transfers. Supports and participates in the labor management partnership process and fosters a work environment where all are treated in a fair and equitable.

Supervises a staff of Air Traffic Control Specialists that is responsible for carrying out air traffic control assignments within a geographic area.

Plans and assigns work to be accomplished by subordinate employees. Sets work priorities and schedules. Approves leave; gives advice, counsel, and instruction to employees on both work and administrative matters. Evaluates performance of employees and recommends performance ratings. Hears and resolves complaints from employees and refers group grievances and more serious unresolved complaints to a higher-level manager. Identifies and arranges for developmental and other training needs of employees. Finds ways to improve production or increase the quality of the work directed. Adjusts staffing levels and work procedures to accommodate resource decisions made at higher levels. Recommends goals and objectives for the area and tracks accomplishments.

Communicates and reinforces diversity and EEO policies and programs in all areas of responsibility, including selections, training, and transfers. Supports and participates in the labor management partnership process, and fosters a work environment where all employees are treated in a fair and equitable manner.

The Operations Supervisor reports to the Air Traffic Manager. Performance is evaluated upon the effectiveness with which assigned program objectives are achieved.

This is a career ladder progression position; the duties described below are at the GS-11 level. If selected at a grade below GS-11, the incumbent will serve in a developmental capacity, wherein the work is less complex in nature and the supervisor, or a senior level employee provides specific instruction and guidance. At the GS-11 grade level, the incumbent:

• Independently conducts a wide variety of onsite safety and health inspections and investigations of mining operations as applicable, mills, preparation plants and related facilities.
• Prepares written reports of inspections and investigations, issuing citations and orders for violations found during examinations.
• Promotes safety and health among mine operators and workers by directing and participating in safety and health training programs, meetings, demonstrations, mine rescue competitions, and related activities.
• Provides technical advice and guidance to mine operators to help them solve problems and comply with mine safety and health requirements.
• Assists mine operators in the planning of modifications to improve and/or correct deficiencies in the operation such as selecting and installing new equipment and changing materials or methods.
• Promotes safety and health among mine operators and workers by directing and participating in safety and health training programs, meetings, demonstrations, mine rescue competitions, and related activities.
• Serves as a MSHA representative and information source on mine safety and health.
• Testifies at judicial hearings regarding notices of violations and orders of withdrawal.

Work Environment: The incumbent inspects and/or investigates both surface and underground mining operations as applicable, which is a very hazardous and stressful work environment surrounded by a high risk of exposure to potentially dangerous situations. In addition to the characteristically dark, wet, and cramped environment, underground mines contain noxious gases and fumes, and the danger of potentially explosive dust or gases, electrical fires, roof falls, and exposure to radiation.

• Performs strategic assessments necessary to continue assembly and sustained operations of the International Space Station (ISS), Artemis, Gateway, or the Extra-Vehicular Activity (EVA) and Human Surface Mobility Program (EHP).
• Leads coordination on the implementation of Federal and Agency aerospace safety standards and requirements that are applicable to aerospace and aeronautical programs and vehicle systems operations.
• Supports policy development, requirements analysis and definition, technical evaluations and makes recommendations to management within their functional and/or technical area of expertise.
• Recommends ways to resolve technical difficulties that can be overcome by changes in approach, criteria or requirements.
• Reviews, assesses, and makes recommendations to Program and Division Offices regarding integrated hazard analyses, risk assessments and evaluations of operations safety to ensure compliance with approved requirements to minimize operational risks.
• Conducts branch or group meetings/reviews for design reviews as a technical lead.
• Performs strategic assessments necessary to continue assembly, sustained and new operations for human, rover and robotic spaceflight.
• Consults with management and planning personnel in preparing requirements and criteria for complex or high value projects for construction or modification of systems, software, or hardware.
• Fosters a culture of engagement, diversity, inclusiveness, excellence and innovation. Champion NASA's commitment to Diversity, Equity, Inclusion and Accessibility to create an environment that promotes a commitment to safety, integrity, and teamwork.

• You will perform a visual inspection of assigned areas (e.g., buildings, structures, aircraft hangar) for violations of fire codes (e.g., fire hazards, housekeeping, defective wiring).
• You will instruct fire prevention and fire extinguisher training for an organization.
• You will prepare inspection reports to document findings of fire safety deficiencies.
• You will be required to successfully complete a pre-appointment physical examination.

• The duties described are for the full-performance level. At developmental grade levels, assignments will be of more limited scope, performed with less independence and limited complexity. The duties may include, but are not limited to:
• Inspects premises in and bordering the quarantine zone, and investigates additions to or losses of livestock from such herds.
• Makes periodic inspections of vacated premises to detect bad fences, cattle tracks, or other evidence of illegal use of the premises.
• Rides horseback and checks all fences in and bordering the quarantine zone to ascertain that they are adequate to prevent intermingling of livestock and consequent exposure to fever tick carriers.
• Collects physical information which may involve sign-cutting and tracking techniques, and uses this information to detect and apprehend strayed or smuggled Mexican livestock.
• Assists with inspection and testing of livestock, poultry, and other avian species on ranches, farms, auctions, markets, etc., to detect animal diseases and parasites.
• Makes arrangements with owners and independently draws blood samples from animals and poultry, conducts necessary serologic tests, tags, brands, appraises reactor animals, and reports findings.
• Oversees the cleaning and disinfection of vehicles and premises that are contaminated by disease organisms or as a precautionary measure.

• Perform dimensional and visual inspection and tests on a wide variety of complex to very complex component parts received as locally fabricated, activity procured material, and/or government furnished material for use in rotary wing aircraft items
• Reviews requests for Material Review Board (MRB), Configuration Control Board (CCB), Equipment Improvement Recommendations (EIRs), customer complaints, and/or proposed revisions.
• Inspect many unique and specially designed machined parts against drawings and specifications by direct measurements
• Serves as quality liaison for quality investigations of nonconforming material and controls nonconforming material

• Selects and maintains pesticide PAR levels and equipment used in operations such as hand sprayers, fogging devices, power sprayers, dusters and traps.
• Operates and maintains pesticide equipment in accordance with specified guidelines.
• Uses publications and directives to ensure the overall program is within guidelines for safety, chemical application and control methods.
• Applies regulations for use of chemicals and proper application.
• Maintains updates of changing laws relating to chemical use, restrictions and regulations.
• Determines and dispenses agents to control a wide variety of insects, vertebrate pests, plant pests and weeds.
• Uses, identities, stores, handles, and disposes of toxic chemicals and media.
• Maintains updates on safety and preventive treatment requirements for storage and exposure to controlled or regulated products.
• Identifies insect, disease and fungal damage to ornamental plants, trees and lawns to achieve appropriate controls.
• Remove s and cleans areas where dead pests, rodents, and animal fowl have been identified, such as attics, basements, light diffusers, etc.
• Accomplishes day-to-day tasks necessary for an effective Integrated Pest Management Program.
• Plans work to be completed, develops surveys, inspection, and treatment schedules.
• Completes administrative records which document the target pest treated, date of treatment, pesticides used, application methods, etc., and other applicable logs or records as required.
• Completes required reports and records operations, including chemicals used and areas treated.
• Secures printed and electronic files containing sensitive information.
• Trains staff on the proper use of chemicals and proper application.
• Advises on preventive measures such as housekeeping requirements and removal of pest hiding areas.
• Maintains a library of appropriate reference materials.

• Provide leadership and technical direction for all phases of project lifecycle including concept of operations, requirements, architecture, design, implementation, integration, testing, operations, and sustaining engineering for assigned projects.
• Manage day-to-day activities and decisions regarding staffing levels to accomplish engineering work, detailed work planning and coordination, resolving problems, and presenting, defending, and interpreting policy and program aspects for projects.
• Establish and approve requirements for the design, testing, and certification of project systems, subsystems, and/or components.
• Manage scope of work, risk management and mitigation, overall schedule and budget, and resources to meet established milestones.
• Use specialized knowledge of space suit Portable Life Support System environmental control systems hardware, including suit interfaces and hazards, to identify technical requirements for ground testing of space suit hardware systems.
• Foster a culture of engagement, diversity, inclusiveness, excellence and innovation. Champion NASA's commitment to Diversity, Equity, Inclusion and Accessibility to create an environment that promotes a commitment to safety, integrity, and teamwork.

• YOU WILL/MAY:
• Ensure that regulated establishments produce a safe product by executing appropriate inspection methods, determining non-compliance with regulatory requirements, documenting noncompliance and initiating enforcement actions, where warranted.
• Verify that meat and poultry slaughter and/or processing establishment's Sanitation Standard Operating Procedures (SSOP) and Hazard Analysis and Critical Control Point (HACCP) Plans meet regulatory requirements.
• Execute Sanitation Standard Operating Procedures (SSOP) and Hazard Analysis and Critical Control Point (HACCP) Plans effectively to prevent unsanitary conditions and adulteration of product.
• Review records, observe plant operations and conduct hands-on verification to ensure compliance with regulatory requirements and prepare detailed documentation (Non-Compliance Records) of non-compliance with regulatory requirements.
• Determine when regulatory control action is necessary. You will assess whether the plant's corrective or preventative actions are acceptable and effective, if there are trends in noncompliance, or if an enforcement action is warranted.
• Conduct regulatory oversight activities inside plants in matters relating to other consumer protections (e.g., economic adulteration and misbranding).
• Have contact with plant managers, owners and others to explain legal and regulatory requirements, discuss operation of the plant's SSOP, HACCP plan and other food safety programs.
• Communicate and defend determinations on non-compliance issues and discuss plans for addressing non-compliance.
• Work with a variety of individuals to resolve problems, clarify differences of interpretation concerning HACCP and other food safety or consumer protection requirements.
• Advise other Agency inspectors, supervisors and officers on inspection and enforcement matters for which you are involved.
• Conduct various samplings, surveys and tests to obtain pertinent data on potential problem areas, industry trends, or other issues of current interest to the Agency.
• Be involved in performing health and safety verification sampling and tests for detection of specific microbes (e.g., salmonella, listeria, etc.), residues or contaminants.
• Assure that products approved for import are in full compliance with all applicable Federal regulations governing the importation of meat and poultry products.
• Authorize entry of all meat or poultry products considered to comply with Federal regulations or refuse entry of any products which violate any of the requirements for admission into this country.
• Coordinate with other Federal agencies (e.g., the Animal and Plant Health Inspection Service (APHIS) and U.S. Customs and Border Protection (CBP) on such matters as animal health restrictions and refused entry lots.