Total 196 Quality Assurance / Control job vacancies in Hong Kong, Hong Kong Island

Centre for Urban Solutions is a research centre in innovative solutions and technologies for urban centres and built environment. The key objective is to support efforts to provide leadership in research and development in innovative solutions for sustainable living and infrastructures for future cities.

The Coastal Protection and Flood Management Research Programme (CFRP) aims to advance knowledge in coastal and flood resilience and spur the growth of a vibrant research and development ecosystem for coastal and flood resilience in Singapore.

The (CFRP) research framework consists of four vertical programmes in which applied research is conducted to generate new knowledge and develop novel, effective, smart solutions for coastal protection and flood management. The framework has three horizontal programmes of broad outcomes that inform and support the verticals. The CFRP will develop innovative multi-functional coastal protection and flood management solutions and will: Catalyse the growth of a local R&D ecosystem to support long-term national agenda; Drive the development and application of effective and smart solutions; Facilitate translation and commercialisation of solutions.

As part of this programme, Vertical 1 Innovative Engineering Solutions, Project 4: Eco-cement enhanced methods for beach erosion control and beach land restoration through soil accumulation in Singapore, will explore eco-friendly and sustainable solutions for coastal protection and land reclamation over beach land inundated by sea level rise.

We are looking for a Research Fellow, based in School of Civil and Environmental Engineering (CEE), to work effectively for advancing the engineering solutions to develop a new Eco-cement enhanced method to form a barrier for coastal protection and land restoration for Singapore and beyond. The role will focus on performing independent and collaborative research to meet the project objectives, developing new solutions, and publishing high-quality journal papers to promote the international reputation of the Centre and the University.

Key Responsibilities:

• Conduct in-depth research on advanced environmentally friendly materials suitable for coastal barrier design and construction, considering durability, environmental impact, and cost-effectiveness.
• Design and oversee laboratory experiments with research team to test the performance and durability of materials under simulated coastal environmental conditions.
• Perform numerical study of the model test. Analyze and interpret data to make informed recommendations for costal protection system design and optimization
• Writing and publication of results in peer-reviewed journals
• Assist in securing external funding through grant applications and proposals

Job Requirements:

• PhD in Coastal Engineering, Biogeotechnical Engineering, Civil Engineering or related discipline
• At least 1-year research experience in related areas.
• Strong background in materials testing, analysis, and selection.
• Experience in ground improvement, geotechnical foundation design, finite element analysis.
• Excellent analytical and problem-solving skills.
• Ability to work collaboratively in a multidisciplinary team.
• Publication track record is an advantage
• Good written and oral communication skills in English - essential for data analysis and communication with stakeholders

Interested applicants are invited to submit a cover letter/full CV/ statement of research interests in one document. Enquiries about this position can be made to Dr. WU Shifan (sfwu@ntu.edu.sg).

We regret to inform that only shortlisted candidates will be notified.

RESPONSIBILITIES:

• Handle daily NDE inspection for LPI, MPI and UT.
• Operation of NDE equipment such as UT, LPI, MPI.
• Prepare reports for NDE inspection.
• Able to interpret BOM and Quality Plan requirements.
• Able to do UT scan plans and review NDE specifications as needed.
• Maintain HSE standards at the work station.

REQUIREMENTS:

• Minimum 3 years experience in Oil & Gas Industry.
• ASNT level 2 certification for LPI, MPI and UT.
• ISO 9712 (Multi-Sector) certification for LPI, MPI and UT will be an advantage.
• Able to work independently.

Today, Lonza is a global leader in life sciences operating across five continents. While we work in science, there’s no magic formula to how we do it. Our greatest scientific solution is talented people working together, devising ideas that help businesses to help people. In exchange, we let our people own their careers. Their ideas, big and small, genuinely improve the world. And that’s the kind of work we want to be part of.

Did you know that we are the 1st biologics contract manufacturer in Singapore? We offer you exposure to upcoming biotech and established pharmaceutical companies and to the manufacturing technology needed to produce mammalian treatments and cell therapies of tomorrow. Our global manufacturing network is recognized for its reliable, high-quality services, regulatory track record, global footprint, innovative technology platforms and extensive experience – we, in Singapore are proud to be part of this global network.

Responsibilities:

• Perform various testing/analysis (bioburden, LAL, plating and counting techniques, microbial identification, EM tests i.e. air sampling, surface viable sampling, total particulate sampling etc.) in timely manner.
• Collecting environmental monitoring samples from different areas of the facilities, generation of required trending and reporting information. Assist in process and/ or environmental microbiology related investigations as required.
• Analysis of bulk product according to Standard Operating Procedures and Test Methods.
• Documentation of results in accordance with current Good Manufacturing Practices (cGMP).
• Problem solving of analytical methods as well as troubleshooting of equipment.
• Involvement in method transfers and validation.
• Involved in equipment qualification and technical selection of QC equipment and/or standards and reagents.
• Generation of required trending and reporting information, document revision and update.
• Support / Perform OOS, deviation investigations. Draft investigations reports.
• General lab support including housekeeping, equipment maintenance, inventory of supplies, lab supplies ordering, management of glass wares, autoclaving etc.
• Any other duties as assigned by your Supervisor/Manager

Experience

• Degree/Diploma in a relevant Science field or Equivalent
• 0-5 years’ experience in Quality Control
• Strong knowledge of microbiological laboratory operations in a manufacturing environment
• Demonstrates an ability and desire to learn from experience
• Good problem solving and analytical skills
• Good communication skills
• Experience with USP 71 Sterility testing is preferred

Every day, Lonza’s products and services have a positive impact on millions of people. For us, this is not only a great privilege, but also a great responsibility. How we achieve our business results is just as important as the achievements themselves. At Lonza, we respect and protect our people and our environment. Any success we achieve is no success at all if not achieved ethically.

People come to Lonza for the challenge and creativity of solving complex problems and developing new ideas in life sciences. In return, we offer the satisfaction that comes with improving lives all around the world. The satisfaction that comes with making a meaningful difference.

Today, Lonza is a global leader in life sciences operating across five continents. While we work in science, there’s no magic formula to how we do it. Our greatest scientific solution is talented people working together, devising ideas that help businesses to help people. In exchange, we let our people own their careers. Their ideas, big and small, genuinely improve the world. And that’s the kind of work we want to be part of.

Did you know that we are the 1st biologics contract manufacturer in Singapore? We offer you exposure to upcoming biotech and established pharmaceutical companies and to the manufacturing technology needed to produce mammalian treatments and cell therapies of tomorrow. Our global manufacturing network is recognized for its reliable, high-quality services, regulatory track record, global footprint, innovative technology platforms and extensive experience – we, in Singapore are proud to be part of this global network.

As a Senior QC Analyst, you will leverage your technical expertise in a variety of testing techniques and collaborate with cross-functional teams to ensure timely project delivery.

Requirement:

• Provide technical leadership in biochemical testing, including cell counts, flow cytometry, ELISA, PCR analysis, and compendial testing (pH, Conductivity, Appearance) as per USP, JP, and EP standards.
• Troubleshoot equipment and method-related issues by analyzing data and trends to resolve problems.
• Collaborate with tech transfer teams to introduce new processes or modify existing ones, acting as the lab's designated point of contact.
• Lead complex projects, coordinating various project teams to ensure successful completion and effective communication across all stakeholders.
• Prepare and manage project documentation, including Method Transfer, Qualification, Validation reports, and product stability programs.
• Oversee preventative maintenance and requalification of stability-related equipment.
• Contribute to Annual Product Reviews and regulatory documents and provide guidance to junior staff.
• Support continuous improvement initiatives and participate in audit activities when needed.
• Proactively communicate risks to managers and the Head of QC.

Requirements:

• Degree in a relevant scientific field or equivalent.
• 5-10 years of QC experience, preferably in biotech, healthcare, or life sciences.
• Expertise in bioassays (ELISA, PCR, FACS) and ability to maintain quality standards while achieving results.
• Strong analytical and decision-making skills, with a desire to continuously learn and grow.

Every day, Lonza's products and services have a positive impact on millions of people. For us, this is not only a great privilege, but also a great responsibility. How we achieve our business results is just as important as the achievements themselves. At Lonza, we respect and protect our people and our environment. Any success we achieve is no success at all if not achieved ethically.

People come to Lonza for the challenge and creativity of solving complex problems and developing new ideas in life sciences. In return, we offer the satisfaction that comes with improving lives all around the world. The satisfaction that comes with making a meaningful difference.

PRINCIPAL ACCOUNTABILITIES

SQP oversees critical and non critical supplier mainly mechanical parts in. SQP is responsible in leading before and after FAS (First Article Submission) qualify and monitor quality performance of new / existing suppliers and ensure uninterrupted supplies of materials and services. He/ She should be able to foster close relationships with suppliers and partners and be able to communicate their value to the company.

JOB RESPONSIBILITIES

1. Lead and Drive First Article Submission for new and existing supplier

Supplier Quality Professional develop Quality plan such as Process Flow Diagram (PFD), Manufacturing Process Plan (MPP) & Inspection Test Plan (ITP) to new supplier. Perform supplier audits such as QMS, Process and HSE. This will involve visit/audit and assessing their capability and FAI. SQP shall work with Sourcing and Engineering, to engage and educate suppliers/sub-contractors.

2. Lead quality performance review

Worked closely with suppliers, to monitor conduct audit for vendor performance. Conduct in process audit and drive for closure of audit findings and continuous improvement and reduction of COPQ (Cost of Poor Quality). Lead the discussion with the suppliers and ensure timely response is executed to deliver result to our internal customers. Guide Procurement and team for supplier performance review process.

3. Supplier Development.

SQP shall drive for vendor development, identify and develop new special process to meet turnkey objective and reduce leadtime of supplier.

4. Analyse supply market.

SQP shall propose and execute creative ways to improve supplier process which creates financial value to the organization.

5. Maintain good relationship with stake holders and customer/s

SQP maintain good relationship with stakeholders such as Manufacturing, Procurement, Engineering and Quality. Work with cross functional teams in resolution of process and quality issues related to design, application and manufacturing process. Develop quality consciousness and impart application of quality tools such as FMEA, 8D.

6. Develop Product Quality Control Plan

SQP shall also be in charge in developing Quality Control Plan according to the requirements of the customer. He/She shall ensure that required processes and documentations and surveillance points are identified in the QCP. He/She shall liase closely with the customer during development of the new QCP and revision of the existing QCP and its approval (internal and Customer).

7. Customer /Third Party Inspection coordinator

SQP shall manage Customer and Third Party inspection of products/parts. He/She shall ensure that each Quality Control Plan activity which requires surveillance points are monitored and conducted accordingly. He/She will liase and communicate closely with the internal and external customers to ensure that TPI inspections are executed according to the plan schedule.

8. Perform any ad-hoc duties as and when assigned by the superior.

9. All employee of Completion Products Pte Ltd shall observe the highest standards of ethics and integrity in undertaking purchasing activity and act in a honest and professional manner that supports the standing of Completion Products Pte Lts core value.

10. Ensures 5S is implemented in the work area.

11. Adheres company’s guidelines with regards to Safety and Quality.

12. Complies to Company Code of Business Conduct.

13. Support and participate in company-wide or departmental programs such as:

· Total Quality Management, Lean Manufacturing

· Social Activities

REQUIRED COMPETENCIES

1. Must complete minimum training required specified in Employee Qualification and OJT Form No. S 1-026F.

2. Ensures Accountability – holding self and others accountable to meet commitments

3. Decision Quality – making good and timely decisions that keep the organization moving forward. Good decisions that are a mixture of analysis, wisdom, experience and judgement.

4. Customer focus – Building strong customer relationships and delivering customer-centric solutions.

5. Drives Result – consistently achieving results, even under tough circumstances. Results might be quantifiable – measured in terms in P&L, sales growth, customer satisfaction ratings, new product launched. Qualitative result -- an enhanced reputation among customers, a more vibrant brand that attracts customer and employee talent.

QUALIFICATION GUIDE

1. Education : Minimum Degree in Technical/Engineering course preferably Mechanical

Engineering

2. Communication : Fluent both in oral and wriiten English communication

3. Experience : Minimum 5 years of working on the same field . Experience in Oil and Gas

manufacturing is an advantage.

Job Description:

• Ensure the machine is working correctly, and calibrating the machine to ensure proper measuring.
• Perform incoming, in-process and final inspection as per customer requirement.
• Maintain calibration record of measuring equipment.
• Document inspection results by completing reports and logs.
• Maintain safe and healthy working environment by following standards and procedures.
• Raise non-conformance report if necessary.

Job Requirements:

• NITEC/Higer NITEC in Precision Engineering.
• 2 -3 years of relevant QC experience in a manufacturing environment and knowledge.
• Able to interpret technical/mechanical drawings of geometrical dimensioning and tolerance.
• Able to perform CMM measurement; preferably with Wenzel or Zeiss.

Purpose:

Responsible for performing the final inspection of assembly products to meet Customer's quality standards.

Key Area of Responsibilities:

· Perform In-process and Final Inspection for assembly tools and loose assembly modules to meet the requirement as defined on drawing, WI and any related documents.

· Initiate Material Review Board (MRB) review when part or assembly is not according to requirement as defined on drawing, WI and any related documents during in-process inspection.

· Update outgoing inspection record after Final Inspection to allow monitoring of the internal quality.

· Raise Non-Conformance Report (NCR) for non-conformance found to ensure reject is recorded.

· Support and participate in company continuous improvement program.

Qualification & Experiences:

· Nitec/Higher Nitec/Diploma in Mechanical Engineering/Electrical Engineering/Mechatronic Engineering or equivalent course

· Preferably with Workplace safety & health in Metal work certification

· Knowledge on quality inspection and buyoff

· No experience are welcome

Job Title: Compliance Officer
Location: 2 Venture Drive #19-18 Vision Exchange Singapore 608526
Employment Type: Full-Time

About Us

Margin Wheeler is one of Singapore’s most trusted and best-reviewed Corporate Service Providers, offering a comprehensive suite of corporate solutions, including incorporation, compliance, accounting, and corporate secretarial services. With over 13 years of experience, we are committed to delivering high-quality, compliant, and efficient services to support businesses at every stage. As we continue to grow, we’re looking for a dedicated Compliance Officer to join our team and uphold our standards of regulatory excellence.

Job Description

The Compliance Officer will play a key role in supporting and enhancing our compliance framework. This role requires a detail-oriented professional with at least 2 years of experience in compliance within the CSP or financial services industry.

Key Responsibilities

• Regulatory Compliance: Monitor and ensure compliance with applicable laws, regulations, and guidelines, including ACRA, MAS, and AML/CFT requirements.
• Client Onboarding and KYC: Oversee client onboarding, performing due diligence and KYC checks in line with regulatory standards and company policies.
• Policies and Procedures: Develop, review, and update internal compliance policies and procedures to ensure adherence to regulatory changes.
• Risk Assessment: Conduct risk assessments on clients and business activities to identify potential compliance risks and propose mitigation strategies.
• Monitoring and Reporting: Implement and maintain a compliance monitoring program; report compliance issues and breaches to senior management, recommending corrective actions.
• Training: Educate and train employees on regulatory compliance, AML/CFT requirements, and any updates in relevant policies and procedures.
• Audit Support: Assist in preparing for internal and external audits, ensuring documentation and processes meet audit requirements.
• Liaison: Act as the point of contact with regulatory bodies, staying informed of regulatory updates and ensuring timely filings and notifications.

Requirements

• Education: Bachelor's degree in Law, Business, Finance, or a related field.
• Experience: Minimum of 2 years of experience in compliance within a Corporate Service Provider (CSP) or financial services environment.
• Knowledge: Familiarity with Singapore’s regulatory requirements for CSPs, including ACRA, AML/CFT, and MAS guidelines.
• Skills:
• Strong analytical and problem-solving skills.
  • Excellent attention to detail and high level of accuracy.
  • Strong written and verbal communication skills.
  • Ability to work independently and as part of a team.
  • Proficiency in compliance software and MS Office Suite.

Preferred Qualifications

• Certifications such as CAMS (Certified Anti-Money Laundering Specialist) or ICA (International Compliance Association) are a plus.
• Prior experience liaising with regulatory authorities.

What We Offer

• Competitive salary and benefits package
• Opportunities for professional growth and career advancement
• Collaborative work environment in a dynamic industry

If you’re a detail-oriented compliance professional looking to grow your career with a leading CSP, we encourage you to apply. Please send your resume and cover letter to hr@marginwheeler.com

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

OB DESCRIPTION

Job Title

Quality & HSE Engineer

Occupation

QUALITY CONTROL ENGINEER

Job Description & Requirements

ompany Description

XPAC TECHNOLOGIES PTE LTD is a packaging company based in Singapore. Our company provides packaging solutions for a variety of industries from pharmaceuticals, aviation and electronics. We pride ourselves on being a one-stop solution provider that offers a wide range of packaging options to meet our clients' needs.

Role Description

This is a full-time on-site role for a Quality Assurance Engineer. The Quality Assurance Engineer will be responsible for executing test cases, and ensuring the quality of the products that we deliver to our clients. The position is located in Singapore.

Qualifications

• Experience in Test Execution and Quality Assurance
• Experience in Manual Testing and Test Case creation
• Knowledge and experience of Principles and Processes such as ISO 9001, ISO14001 and bizSAFE
• Excellent analytical and problem-solving skills
• Ability to work as part of a team
• Excellent written and verbal communication skills
• Diploma in Logistics & Supply Chain Management or Mechanical Engineering with HSE background
• Minimum of 2 years working experience in the relevant industry

Responsibilities

• Keep abreast of all relevant laws, regulations and corporate governance requirements including data privacy, Charities Act etc.
• Develop, review, and update compliance policies and procedures. Ensure policies align with the relevant laws and regulations.
• Ensure timely submissions to the relevant authorities.
• Support the Board, Executive Committee, and Audit and Risk Management Committee meetings.
• Support maintenance of the enterprise risk management framework including working with key risk owners and stakeholders to identify new risks and develop/review risk mitigation plans.
• Support management reporting to key stakeholders including the board.
• Manage the scientific publications database and coordinate with key stakeholders on performance monitoring and to prepare presentations and reports to key stakeholders.
• Any other duties assigned by the Reporting Officer.

Requirements

• Bachelor’s degree in law, business, finance, or a related field.
• Minimum 5 years of relevant experience in compliance.
• Strong project management and organizational skills.
• Strong analytical skills and attention to detail.
• Ability to work independently and collaboratively in a fast-paced environment.
• Good communication and interpersonal skills.
• Experience with a non-profit organisation or research institution preferred.

Salary and benefits are commensurable to educational qualifications and working experience of the candidates. Benefits include annual leave, medical and flexi-benefits, etc.

Interested individuals may apply by sending their curriculum vitae to jocelyn_pang@tll.org.sg.

For more info, please refer to our website: www.tll.org.sg.

(Please note that only shortlisted candidates will be notified.)

Today, Lonza is a global leader in life sciences operating across three continents. While we work in science, there’s no magic formula to how we do it. Our greatest scientific solution is talented people working together, devising ideas that help businesses to help people. In exchange, we let our people own their careers. Their ideas, big and small, genuinely improve the world. And that’s the kind of work we want to be part of.

Did you know that we are the 1st biologics contract manufacturer in Singapore? We offer you exposure to upcoming biotech and established pharmaceutical companies and to the manufacturing technology needed to produce mammalian treatments and cell therapies of tomorrow. Our global manufacturing network is recognized for its reliable, high-quality services, regulatory track record, global footprint, innovative technology platforms and extensive experience – we, in Singapore are proud to be part of this global network.

Responsibilities:

• Support daily Quality Assurance activities in accordance with approved SOPs / Policies for a large scale, multi-product, GMP biotech manufacturing facility.
• Planning for future activities and coordinate with other departments to complete the workflow.
• Develop skills to be Qualified Trainer in area of expertise.
• Develop in depth awareness of entire process; identifying operational factors which influence the process.
• Participates in Regulatory and Customer Audits.
• Support in performing gap assessments between group documents and or regulatory guidelines
• Participate actively or lead in deviation investigations, change controls, CAPA plans and closure of discrepancy reports.
• Ensure real-time decisions on process events on the floor based on knowledge of defined SOPs & policies.
• Develops good working relationships with internal & external customers.
• A competent Reviewer and Approver of SOPs, protocols, reports or records.
• Lead a small team and provides supervision to QA Coordinators, interns or Specialists.
• Any other tasks as and when assigned by supervisor.

Requirements:

• Bachelor's degree with 2-5 years’ experience in Quality Assurance in the Biopharmaceutical industry.
• Relevant QA Operations background with experience in leading small team for projects.
• Experience in deviation investigation, change control and CAPA activities.
• Hands-on experience coordinating & interacting with internal departments on manufacturing activities.
• Fair knowledge and experience of the practical and theoretical requirement of quality management system in a GMP facility.
• Meticulous and Systematic.
• Team player, with strong focus on safety, quality and timelines.

Every day, Lonza’s products and services have a positive impact on millions of people. For us, this is not only a great privilege, but also a great responsibility. How we achieve our business results is just as important as the achievements themselves. At Lonza, we respect and protect our people and our environment. Any success we achieve is no success at all if not achieved ethically.

People come to Lonza for the challenge and creativity of solving complex problems and developing new ideas in life sciences. In return, we offer the satisfaction that comes with improving lives all around the world. The satisfaction that comes with making a meaningful difference.

Responsibilities:

• Collaborating with Process Engineer & Engineering team to establish QC standards.
• Creating documentation for inspection criteria and quality plans.
• Collaborating with QA, Process, and Product teams to address quality issues through corrective action.
• Conducting in-process audits and final quality control audits with the Process team.

Requirements:

• Diploma in Manufacturing/Quality Engineering or equivalents.
• Minimum 1 year of working experience in Electronics Manufacturing Industry.
• Responsible for controlling Supplier Quality Assurance (SQA).
• Oversight of quality control for incoming, in-process, and outgoing products.
• Knowledgeable in ISO 9001, 14001, 13485, and 45001, and FDA requirements.
• Understanding IPC requirements in PCB assembly and quality standards for various manufacturing processes such as plastic molding, die casting, extrusion, metal stamping, and machining parts.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact win@hkmsvs.com for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Description

• Put up technical statements and requirements for all aspects of Instrumentation, Control, and Automation (ICA) Works, including network development and associated field engineering works.
• Execute procurement functions, including strategic sourcing and supply contracting works.
• Communicate and work very closely with the Procurement Manager and ICA Head for preparation of the invitation of the request for Proposal and administering of the purchase requisition and award consent.
• Maintain and update all procurement documentation and records.
• Support the Instrumentation, Control and Automation Head of Department in budget monitoring.

Job Requirements:

• Diploma or Degree in Electrical, Chemical, or Environmental Engineering.
• Minimum of 3 years of working experience. Applicants with more than 8 years of working experience will be considered as Senior Procurement Executive.
• Experience in Environmental Engineering, particularly in water, wastewater treatment, and Waste-to-Energy (WTE) industries, with a focus on SCADA and DCS is preferred.
• Good oral and written command in English.
• Proficiency in Microsoft Office Suite, including Word, Excel, and PowerPoint.
• Experience with auditing procedures and compliance standards.
• Commercially orientated with good negotiation skill.

Responsibilities:

As the Food Safety and Quality Assurance Officer, you will be responsible for ensuring the highest standards of food safety, quality, and compliance with ISO22000 for our central kitchen, supermarket counters and trading business under the subsidiary company.

Your key responsibilities include:

1. Compliance Management:

• Oversee and implement food safety and quality management systems in accordance with ISO22000.
• Conduct regular internal audits and inspections to ensure compliance with all relevant regulations and internal standards.

2. Documentation and Reporting:

• Maintain accurate records of all food safety and quality assurance activities.
• Prepare comprehensive reports for management, summarizing key performance indicators and areas for improvement.

3. Training and Development:

• Develop and deliver training programs for operation staff at the central kitchen and supermarket counters on food safety protocols and best practices.
• Keep the team informed about updates in food safety regulations and industry trends.

4. Incident Response:

• Establish and implement effective procedures for handling food safety incidents and product recalls protocols.
• Conduct thorough investigations into any breaches of food safety standards and recommend corrective actions.

5. Supplier and Vendor Management:

• Collaborate with suppliers and vendors to ensure the quality and safety of raw materials used in our production processes.
• Evaluate and approve suppliers based on established criteria.

Qualifications:

• Certification in ISO22000.
• Proven experience in food safety and quality assurance, preferably in the sushi and sashimi production industry.
• Strong knowledge of local and international food safety regulations.
• Excellent communication and training skills.