Total 75 Quality Assurance / Control job vacancies in Fort Novosel, Alabama

• Serve as the desk control officer with the responsibility of directing and operating the security communications system network.
• Serve as the Intrusion Detection System (IDS) operator with the responsibility for the monitoring and the operational control of the Sensitive Arms IDS computers.
• Maintain both secure and open communication with mobile patrols and posts, controls and directs security force actions in routine and/or emergency situations.
• Initiate periodic patrol and post location and status check from security personnel.
• Conduct long and short-term investigations when solutions cannot be achieved during the course of a normal shift.
• Serve as the primary operator for the Intrusion Detection System consisting of two computer systems to monitor sensitive security buildings.
• Instruct personnel having less familiarity with work operations on a day-to-day basis in specific security procedures and techniques applicable to orders and instructions relating to work assignments.
• Exercise a thorough knowledge of all security orders, regulations and procedures applicable to all posts and patrols within the depot security operation.

1. Inspects a large variety of heavy-duty mobile equipment, combat, tactical and automotive vehicles such as attack tanks, large cranes, tank retrievers, fire trucks, bridge transporters, armored vehicle launched bridges, bulldozers, road graders, crawler tractors, power shovels, self propelled earth compacting equipment, self propelled artillery, etc. May also inspect heavy artillery, small arms, powered support and other equipment or components of equal or lesser complexity.
2. Inspects complex, interrelated mechanical, hydraulic, pneumatic, electronic and electrical systems, equipment and their components while in operation or in a standby condition. Inspects and performs tests to braking, steering, and differential systems, which are mechanically integrated with the transmission; to large engines that directly power multiple hydraulic and pneumatic systems; to intricate fuel injection systems; to turret stabilization systems; and to other systems combined in a single, complex mechanical assembly. Uses specially designed testing methods and test equipment such as computerized test sets, precision gauges, electronic sensors, injector test stands, engine scopes, etc., to assure that tolerance and safety factors have been met.
3. Inspects equipment to determine repairs needed. Utilizes established Maintenance Expenditure Limits (MEL) to evaluate economic feasibility of repair(s). Considers a variety of factors such as cost and availability of parts, man-hours, and impact of time constraints on the mission to assess whether repair is economical. Recommends to a higher echelon to condemn equipment when the repair cost exceeds the established MEL. Prepares lists of needed repairs, parts, and man-hours authorized. Performs in-process inspections to assure that equipment is being repaired in accordance with pertinent requirements. Performs final inspection, certifying that equipment is in satisfactory operating condition, or rejects the work and returns the equipment to the repair shop with specific reports prescribing additional repairs.
4. Inspects the full range of equipment as described above at remote worksites in support of field organizations, field units during field exercise training periods, or before major pieces of equipment are sent for repair to a supporting maintenance facility. Serves as inspector on Command Maintenance Evaluation Teams (COMET) and/or as a member of Maintenance Assistance and Instruction Teams (MAIT)
5. Performs other duties as assigned.

The Front-Line Manager is responsible for aviation safety activities in a complex and dynamic environment. Manages and monitors individual and unit, group, or team performance standards with organizational initiatives, goals, and objectives by providing feedback, acknowledging achievement, and addressing performance deficiencies. Incumbent has full authority and responsibility to make all decisions and take action in the assigned program areas, subject to the manager's administrative review. Higher-level management reviews performance periodically by utilizing/reviewing work products, status reports, and organizational measures in place to ensure timeliness, policy compliance, and overall alignment with the Flight Standards Service.

Directs the work of subordinate employees at the organizational unit level creating appropriate expectations for achieving intended results. Managerial duties include planning, organizing, setting priorities; assigning and allocating work for a unit, group, or team; monitoring and evaluating performance; coaching and developing employee capabilities; approving leave; and taking or recommending corrective/disciplinary action, as appropriate. Defines/redefines priorities as needed while meeting changing demands. Delegates the work that is appropriate for others under their direct supervision. Identifies relevant stakeholders associated with the work of the unit or branch and engages to receive feedback on unit performance, relationships and individual well-being. Creates partnerships exemplified by mutual respect, productive conflict, and effective action taking to address service issues. Encourages teamwork within the unit or branch exemplified by ensuring individuals are working with others beyond their area of expertise, specialty or job role to collect and consider other views and perspectives.

Applies a comprehensive knowledge of the technical aspects of the directed work, typically governed by Federal Aviation Regulations, established guidelines, policies, and procedures. Faces challenges or barriers, taking time to consider and discuss a range of relevant views from direct reports, peers and others. Takes actions to address impediments to success for individuals, unit, or team. Creates, communicates and reinforces clarity of direction for individuals. Views questions from direct reports as opportunities to clarify direction, learn, and grow. Builds and maintains external stakeholder trust and confidence. Works collaboratively to resource and achieve critical priorities effectively across functions and cultures. Works collaboratively with stakeholders and service providers in designing and providing a sound business case to next-level manager for fiscal and human resource needs that support individual direct reports and the unit, group, or team, aligning with the expectations of Flight Standards (FS).

Anticipates changes that affect organizational vision and assists in developing new policies and procedures. Develops strategies to implement organizational change. Demonstrates a positive attitude to achieving results, quickly recovering from setbacks, and learning from experience. Models creative thinking and innovation. Selects or recommends selection of non-supervisory employees for positions in the unit. Ensures direct reports are competent in their role and range of responsibility. Provides guidance and mentoring to enhance employee’s knowledge and ability. Provides coaching for development and uses influence to support employee performance and growth while providing effective feedback. Demonstrates leadership and commitment to the FAA model EEO program.

• Perform quality assurance inspections.
• Reviews contractor quality control reports.
• Maintain statistical analysis of contractor operations.
• Verify maintenance was completed within regulations.
• Advise Contracting Officer Representatives (COR) on contractor performance.

As a Surface Maintenance Mechanic Inspector, WG-5801-11, you will:

Perform limited diagnosis, routine repairs and maintenance on heavy-duty mobile equipment, combat, tactical and automotive vehicles.

Assist higher graded mechanics in the repair and/or overhaul of major systems to include internal combustion engines, turbine engines, automatic and non-automatic transmissions, heavy duty drive line systems, and hydraulic utility systems and controls.

Independently perform routine repairs and maintenance functions in remote locations that can be accomplished by removing, cleaning, reinstalling, or replacing defective parts of components and systems using standard parts.

Receive guidance and instruction from a higher graded mechanic or supervisor to perform non-routine and more complex repairs on portions of major assemblies and/or systems.

Conduct limited readiness and repair inspections on vehicles and associated equipment supported by the activity.

Perform Preventive Maintenance Checks and Services (PMCS) and ensures vehicles and equipment are properly serviced, including brake adjustments, replacing hydraulic fluids, greasing, cleaning, etc.

Recover and evacuates inoperable vehicles from the unit location of breakdown.

Determine when parts should be cleaned, adjusted or replaced with standard parts to complete work orders.

Perform other duties as assigned.

• Perform long-range planning and analysis for IG inspections.
• Conduct and participate in on-site systematic and follow-up inspections.
• Develop and write inspection plans to conduct assistance and investigative alone and as a team member.
• Receive cases, conduct preliminary analysis, and determine case disposition.

• Perform long-range planning and analysis for IG inspections.
• Conduct and participate in on-site systematic and follow-up inspections.
• Develop and write inspection plans to conduct assistance and investigative alone and as a team member.
• Receive cases, conduct preliminary analysis, and determine case disposition.

• Maintain a safe, healthy work environment in accordance with the rules, regulations and prescribed guidance on occupational health and safety hazards.
• Execute and document quality assurance matters concerning Government oversight of contractor operations.
• Promote internal and external customer satisfaction by establishing communications with appropriate representative.
• Facilitate aircraft scheduling between the contractor and government flight operations in accordance with all applicable directives.
• Monitor contractor performance and conducts quality assurance inspections to ensure contractor's processes, repairs, and maintenance of aircraft and aircraft systems are in accordance with contract and regulatory specifications.

• Maintain a safe, healthy work environment in accordance with the rules, regulations and prescribed guidance on occupational health and safety hazards.
• Execute and document quality assurance matters concerning Government oversight of contractor operations.
• Promote internal and external customer satisfaction by establishing communications with appropriate representative.
• Facilitate aircraft scheduling between the contractor and government flight operations in accordance with all applicable directives.
• Monitor contractor performance and conducts quality assurance inspections to ensure contractor's processes, repairs, and maintenance of aircraft and aircraft systems are in accordance with contract and regulatory specifications.

• Responsible for developing and accomplishing fire prevention inspections and developing an education program in assigned areas of responsibility at the installation.
• Conducts physical inspections of large, complex, and highly fire prone post and range facilities including mission related facilities.
• Determines potential fire hazards, existing fire hazards, and works with operating officials, project officers, etc., to eliminate, prevent, or reduce the hazards.
• Incumbent inspect fire protection systems that include automatic heat detection, automatic smoke detection, and dry chemical extinguishers, wet pipe sprinklers, dry pipe sprinklers, pre-action sprinklers, and deluge systems.
• Reviews work requests involving alteration and extension of existing facilities.
• Develops special educational materials and programs for the building coordinators required.
• Serves as a fully trained member of a firefighting crew engaged in the protection of life and property.
• Serves as certified Hazardous Material Technician, responding to hazardous chemical spills on the Installation.

• Plan, weekly and monthly schedules and sequence of operation for subordinates.
• Establish deadlines and priorities on the basis of general work schedules, methods, and procedures.
• Determine equipment, supplies and maintenance required.
• Investigate work related problems to identify causes.
• Maintain necessary documentation pertaining to compliance of hazardous materials.

The primary purpose of this position is: To ensure quality characteristics are met for product quality verification on aircraft, systems, and products. Also to provide effective and comprehensive oversight and management of a government contract program located in the 301st Fighter Wing.

• Develops and implements a structured and systematic quality assurance surveillance program for all facets of integrated logistics support, providing maintenance managers with the assurance that propulsion system contractors, fleet maintainers, fleet operators, program office engineers and logisticians, and airworthiness authority delegates adhere to customer required specifications in technical, safety, deliverables, and reporting directives
• Consolidates data collection processes for clear and concise reporting, utilized by all levels in the management chain for evaluation, inspection, and audit programs. Independently evaluates the results and, where necessary, recommends the most appropriate corrective action to command level management
• Reviews aircraft field sustainment repairs and maintenance, gathers metrics and prepares reports to initiate corrective action if results indicate contract standards or performance requirements are not met
• Identifies and documents vulnerabilities within the inspection and acceptance of supplies/service to ensure safety of flight

Supervises staff of Air Traffic Control Specialists that is responsible for carrying out air traffic control assignments.

Plans and assigns work to be accomplished by subordinate employees. Sets work priorities and schedules. Approves leave; gives counsel, and instruction to employees on both work and administrative matters. Evaluates performance of employees and performance ratings. Hears and resolves complaints from employees and refers group grievances and more serious complaints to a higher-level manager. Identifies and arranges for developmental and other training needs of employees. Finds ways improve production or increase the quality of the work directed. Adjusts staffing levels and work procedures to accommodate decisions made at higher levels. Recommends goals and objectives for the area and tracks.

Communicates and reinforces diversity and EEO policies and programs in all areas of responsibility, including selections, training, transfers. Supports and participates in the labor management partnership process and fosters a work environment where all are treated in a fair and equitable.

• Contribute senior leadership and participates in regional business processes such as strategic planning, workload sharing, and quality management for engineering and construction.
• Serve as Division senior technical advisor to the districts in their discipline on engineering activities, responsible for the competence of projects designed and built in the Division.
• Provide leadership for solutions of advanced, unprecedented engineering problems to key managers, counterparts at the districts, higher headquarters, Corps research and development laboratories, and other Corps, government, and private interests.
• Participate in Regional and national-level meetings, workshops, committees, professional conferences, inter-agency panels, and boards for exchange of technical information and advice on matters regarding engineering.

• Serves as a Fire Prevention Inspector working a 60-hour week, providing Fire and Emergency Services to the organization.
• Plans, schedules and conducts fire prevention inspections of facilities and operations.
• Inspects a wide variety of mission essential operations, requiring special adaptation of standard fire prevention practices and procedures to meet local, national security, homeland defense and space exploration requirements.
• Interviews personnel at the incident scene, including other fire fighters, and gathers information relative to the fire.
• Participates in the development and delivery of fire prevention training programs.