Total 23 Quality Assurance / Control job vacancies in Fort Drum, New York

• Act in the capacity of Fire Prevention Inspection and advisor to the Assistant Fire Chief.
• Conduct both fire prevention and fire reaction training to all military and civilian on the installation and the surrounding community (public schools, civic clubs, nursing homes, etc.).
• Perform fire protection and prevention inspections for the reason of detecting, controlling, and eliminating hazards throughout the installation.
• Review plans and specifications for new construction and alterations and extensions of existing structures.

• Review contractor proposals to insure completeness and appropriateness.
• Prepare technical analysis or Pre-negotiation Objectives as required based on cost analysis of contractor's proposal and Government estimate.
• Develop construction methods and quality control techniques for projects that involve specialized facilities with special purpose technical equipment installation and structural features.
• Monitor progress on contract as represented by contractor prepared progress charts and network analysis systems.
• Conduct negotiations with contractor personnel on modifications and negotiated contracts.
• Review plans and specifications prior to contract advertisement to determine such things as practicability from a construction standpoint.

Supervises a staff of Air Traffic Control Specialists that is responsible for carrying out air traffic control assignments within a geographic area.

Plans and assigns work to be accomplished by subordinate employees. Sets work priorities and schedules. Approves leave; gives advice, counsel, and instruction to employees on both work and administrative matters. Evaluates performance of employees and recommends performance ratings. Hears and resolves complaints from employees and refers group grievances and more serious unresolved complaints to a higher level manager. Identifies and arranges for developmental and other training needs of employees. Finds ways to improve production or increase the quality of the work directed. Adjusts staffing levels and work procedures to accommodate resource decisions made at higher levels. Recommends goals and objectives for the area and tracks accomplishments.

Communicates and reinforces diversity and EEO policies and programs in all areas of responsibility, including selections, training, and transfers. Supports and participates in the labor management partnership process, and fosters a work environment where all employees are treated in a fair and equitable manner.

The Operations Supervisor reports to the Operations Manager. Performance is evaluated upon the effectiveness with which assigned program objectives are achieved.

• Provide technical guidance and/or advisement on the Health Insurance Portability and Accountability Act (HIPAA) and Freedom of Information Act.
• Develop policy and procedures for local implementation of DoD HIPAA Privacy regulations.
• Prepare written reports for command group on Health Insurance Portability and Accountability Act (HIPAA) compliance such as trends, problem areas, findings.
• Recommends protective measures such as file access controls, software and physical safeguards and personnel and visitor control at central and remote sites.
• Utilize an automated system to maintain and/or create documents and/or presentations for the facility.

• Serves as an Inspector General (IG), Chief of Assistance and Investigations, with responsibility for responding to requests for IG assistance, conducting investigations, and planning and executing site visits.
• Evaluates and assesses overall operations of organization by reviewing assistance and investigation activity in such areas as resource utilization, military leadership, training, compliance with regulations and directives, and business practices.
• Prepares report of findings, and develops briefing or executive summary for presentation to the Commander, Deputy Commander, Chief of Staff, and senior leaders in HQ ARCYBER.
• Serves as the liaison between DoDIG, DAIG, Combatant Command IGs, USCYBERCOM, ACOM/ASCC/DRU IGs, NETCOM, 7th SC(T), 335th and 311th SC(T) IG subordinate commands in discussing issues relevant to the IG functional responsibilities.
• Analyzes and reports on ARCYBER’s state of economy, efficiency, systemic weaknesses, discipline, and morale for the Commanding General.
• Conducts investigations into complaints, allegations of fraud, improper conduct, and other situations where individuals assert they have been wronged by a DoD system or that a system is not functioning as required or designed.

• Guide the Contracting Officer Representative (COR) on resolving noncompliance issues and implementing corrective actions effectively.
• Provide guidance to dining facility staff on the proper care, use, and maintenance of food service equipment to maintain efficiency.
• Advise on equipment upgrades and modernization efforts to enhance dining facility functionality.
• Analyze statistical data to compile quarterly Food Cost and Feeding Strength Summary Reports for program oversight.
• Inspect food preparation processes to verify meal quality, progressive cookery, and plate waste management.
• Conduct compliance evaluations of dining facilities to ensure adherence to contractual, regulatory, and operational standards.

The National Security Agency (NSA) currently has opportunities for highly motivated Industrial Control System (ICS) Specialists/Engineers to provide expertise in the design, construction, commissioning, and operation of new and renovated electrical and mechanical infrastructure. This position has two areas of focus, one within Design and Engineering (D&E) and the other with Operations and Maintenance (O&M).

As an ICS Specialist/Engineer within D&E, you will work closely with multidisciplinary teams encompassing project managers, stakeholders, and contractors throughout the entirety of the project life-cycle, including close coordination with O&M. You will also be responsible for the development and review of designs, specifications, technical reports, and cost estimates for power monitoring and control of electrical and mechanical infrastructure, energy management monitoring, and ICS cybersecurity.

As an ICS Specialist/Engineer within O&M, you will work closely with ICS Specialists who support many facets of the Industrial Control Systems in the Facilities Control Center (FCC), which is a 24/7 operations center where facilities systems can be effectively monitored and maintained. The ICS team supports power monitoring and control, energy management monitoring and control, the transport network and various Information Technology (IT) and Operational Technology (OT) hardware, components, software, and applications to ensure a robust secure operation of the overall system.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

Research Fellow position is open in the research group of Assistant Professor Zhao Lin, at the Department of Electrical and Computer Engineering, National University of Singapore (NUS).

The Research Fellow will work closely with the Principal Investigator (PI) on theories and applications of learning-based control. The project will investigate and develop both deep reinforcement learning algorithms and conventional robust adaptive control methods, to develop safety-critical learning-based control algorithms that leverage the advantages of both model-based and model-free methods. In particular, the developed algorithms will be demonstrated through robust control of drones.

The initial appointment duration is 12 months, which can then be extended based on an evaluation at the end of the initial appointment.

The candidates will be responsible for conducting theoretical research and algorithm development. The candidates are expected to help the PI supervise junior PhD students as well.

The candidates should have a Ph.D. degree from a reputable university, with expertise in robust adaptive control, reinforcement learning theory, collision-avoidance trajectory optimization, etc.

A successful candidate should have a solid mathematical background (such as in calculus, linear algebra, optimization, etc.). Strong publication records in leading journals and conferences are required.

Qualifications

• Possess a Ph.D. Degree in either Electrical Engineering or strictly related (e.g., Mathematics, Computer, Communication, Mechanical, or Information Engineering).
• Have substantial research experiences in robust adaptive control, reinforcement learning, learning-based control, model predictive control, etc.
• Possess a strong academic record proved through coursework (especially math-intensive courses) and projects during his/her undergraduate and doctoral studies.
• Strong publication records in leading journals and conferences are highly valued
• Excellent communication skills as he/she is required to publish and present results at conferences and journals independently.
• Have well-established analytical and problem-solving skills, as documented by publications that are relevant to the field of reinforcement learning and control for robotics applications.
• Activity performed in world-class research environments is highly valued.

Under the general direction of the Principal Inspector or Supervisory Principal Inspector accomplishes the following duties:

A. Technical Administration

On a continuing basis, ensures assigned organizations are properly and adequately organized, staffed and equipped; establishes and conducts adequate training programs; maintains record keeping systems; and facilities and ensures procedures meet all regulatory requirements.

Chairs joint Federal Aviation Administration (FAA) and industry meetings. Maintains regular contact with organizations assigned and coordinates with top management officials. Requires or directs correction of any deficiencies/discrepancies and refuses or withdraws approval if they cannot be resolved.

Responsible for conducting enforcement investigations and preparation of final reports and recommendations on disposition. Performs or supervises the emergency suspension of certificates or cancellation of operations specifications. Conducts or directs the reexamination of certificated airmen or recertification of an operator or agency.

Conducts investigations of public complaints, congressional inquiries, and aircraft incidents and accidents. Provides verbal and/or written technical assistance to legal counsel, testifies at court trials and formal hearings, and gives dispositions.

Coordinates minimum equipment list (MEL) approvals with the principal inspector. Takes enforcement action in instances of noncompliance with the MEL.

Coordinates with geographic inspectors for the accomplishment of non-routine air carrier surveillance.
Assists Principal Inspector in the planning and implementation of certificate holders surveillance via usage of the appropriate safety system.

B. Certification

Approves/accepts or disapproves/rejects manuals and revisions to such manuals. May require amendments to previously approved manuals to accomplish the following: correct any conflict with regulatory requirements; eliminate unsafe practices: and/or improve the specificity of instruction.

Evaluates training programs to ensure that they meet the requirements of 14 CFR. Approves or disapproves these training programs including flight simulators, training devices, or other such equipment used in these programs.

Approves/disapproves designation of check airmen and makes recommendations on the appointment of designees.
Evaluates operations and facilities by on-site inspections and review of reports by geographic inspectors or others. Negotiates changes essential or desirable in their policies and procedures. Determines the appropriate methods and/or plans for securing corrective action and determines through on-site inspection or inspector reports the effectiveness of any action.

Evaluates and approves/disapproves requests to operate under conditions not previously authorized and may prescribe additional conditions and limitations as appropriate.

Approves the original issuance of operations specifications and issues original operating certificates. Approves amendments to operations specifications. Evaluates the safety of proposed changes in route or airport authorizations; prescribes any changes required before approval.

Directs or participates in flight evaluations to determine compliance with 14 CFR. Recommends changes that will be required prior to approval.

Duties and Responsibilities continued below

As an QUALITY ASSURANCE SPECIALIST, GS-1910-11, you will:

• Determine the proficiency and qualifications of certified personnel.
• Make decisions and recommendations on technical concerns presented by supervisors.
• Ensure that quality considerations are addressed and requirements achieved for all aircraft maintenance work and support functions to ensure end items perform as intended with reliability.
• Serve as the Quality Assurance Specialist for the planning, implementation and execution of a quality assurance program that includes the full range of quality principles, concepts, inspection techniques, surveillance and evaluation.
• Perform other duties as assigned

• YOU WILL/MAY:
• Ensure that regulated establishments produce a safe product by executing appropriate inspection methods, determining non-compliance with regulatory requirements, documenting noncompliance and initiating enforcement action, where warranted.
• Verify that meat and poultry slaughter and/or processing establishment's Sanitation Standard Operating Procedures (SSOP) and Hazard Analysis and Critical Control Point (HACCP) Plans meet regulatory requirements.
• Execute Sanitation Standard Operating Procedures (SSOP) and Hazard Analysis and Critical Control Point (HACCP) Plans effectively to prevent unsanitary conditions and adulteration of product.
• Review records, observe plant operations and conduct hands-on verification to ensure compliance with regulatory requirements and prepare detailed documentation (Non-Compliance Records) of non-compliance with regulatory requirements.
• Determine when regulatory control action is necessary. You will assess whether the plant's corrective or preventative actions are acceptable and effective, if there are trends in non-compliance, or if enforcement action is warranted.
• Conduct regulatory oversight activities inside plants in matters relating to other consumer protections (e.g., economic adulteration and misbranding).
• Have contact with plant managers, owners and others to explain legal and regulatory requirements, discuss operation of the plant's SSOP, HACCP plan and other food safety programs.
• Communicate and defend determinations on non-compliance issues and discuss plans for addressing non-compliance.
• Work with a variety of individuals to resolve problems, clarify differences of interpretation concerning HACCP and other food safety or consumer protection requirements.
• Advise other Agency inspectors, supervisors and officers on inspection and enforcement matters for which you are involved.
• Conduct various samplings, surveys and tests to obtain pertinent data on potential problem areas, industry trends, or other issues of current interest to the Agency.
• Be involved in performing health and safety verification sampling and tests for detection of specific microbes (e.g., salmonella, listeria, etc.), residues or contaminants.
• Assure that products approved for import are in full compliance with all applicable Federal regulations governing the importation of meat and poultry products.
• Authorize entry of all meat or poultry products considered to comply with Federal regulations or refuse entry of any products which violate any of the requirements for admission into this country.
• Coordinate with other Federal agencies (e.g., the Animal and Plant Health Inspection Service (APHIS) and U.S. Customs and Border Protection (CBP) on such matters as animal health restrictions and refused entry lots.

• Inspect vehicles transporting ammunition to ensure the vehicle is mechanically safe to transport ammunition and that the ammunition loaded on vehicle is compatible, properly loaded and secured, and appropriate placarding is in place.
• Use automated / manual inventory systems to maintain records.
• Periodically inspects ammunition magazines to ensure that ammunition is packaged, marked, and stored IAW applicable regulations
• Conducts visual type of inspections of ammunition ensuring packages and marks ammunition in accordance with regulations.
• Operate electric, gasoline, or diesel-powered forklift trucks in order to lift loads weighing up to 10,000 pounds and as high as 168 inches.
• Ensure ammunition items are appropriately stored in correct areas.

• Performs duties associated with the administration of the quality assurance provisions of contracts by designing, implementing, and maintaining a risk-based surveillance program and assessment plan.
• Identifies opportunities for process improvements through analysis of process measurement data.
• Serves as a member of a multi-functional or technical team. Responsible for implementing the overall Quality Program for a diversity of products and services in support of U.S. Government acquisition at one or more supplier’s facilities.
• Ensures contractor compliance with all requirements related to the design, manufacturing, repair, overhaul, and modernization of a variety of items for contractor and customer activities throughout the world.
• Independently performs audits/surveillance of contractor’s processes to ensure customer and contractual requirements are met.
• Investigates and provides data on customer complaints/concerns regarding contractor’s quality performance and processes which impact user satisfaction.
• Provides technical support to all other DCMA team members, assisting in the analysis of contract related issues to determine the best course of action to support the contractor and customers.

DESCRIPTION

The Regulatory Compliance Manager reports to the Project Director and shall be responsible for the effective design effort and coordination of the Sub-Contractor's discipline engineering professionals. The Regulatory Compliance Manager shall ensure that all de-signs comply with the requirements of the Work; that all Work is efficiently and effectively executed in accordance with the criteria, specifications and standards listed in the CONTRACT; and that the designs comply with safe and reasonable standards as accepted within the offshore oil and gas industry. The Regulatory Compliance Manager shall be responsible for his/her scope of work as given below:

DUTIES & RESPONSIBILITIES

• Develop Regulatory Permits & Consents Compliance Plan for the project including all active and passive statutory and Classification compliance requirements.
• Review Compliance Plan with Client and Class Authority, and report as necessary.
• Monitor changes in regulations to ensure the project is designed and installed to satisfy the correct edition of statutory and Classification requirements.
• Inform all disciplines of Regulatory and Classification requirements.
• Monitor the submission of Regulatory Compliance documentation and maintain master file of all Regulatory Permits & Consents.
• Monitor the issue of acceptance or permits by the Regulatory bodies and Classification society.
• Handover Regulatory Permits & Consents Compliance Plan to CLIENT/Operator indicating dates when permits and consents are required to be renewed.
• As necessary, participate with Project Management in negotiation and establishment of contracts for Class review and Regulatory Compliance at bid, FEED, or sanction stages of project.
• Provide Regulatory audit functions for accuracy of PO certification and inspection requirements within Regulatory Compliance scope (Vendor Compliance).
• Collect and promulgate Regulatory lesson learned during project.
• Support project team with respect to availability of appropriate / applicable codes and standards from Company reference library resource.

Comply with HSE requirements:

• Environmental Aspects & Impacts Assessment.
• OHS Hazardous & Risk Assessment.
• Follow HSE Regulations.

REQUIREMENTS

• Minimum educational requirements of a Bachelors’ and/or Masters’ degree in Mechanical / Chemical / petroleum Engineering or equivalent.
• Direct experience working on FPSO projects.
• Experience working with regulatory bodies in West Africa, China, and Europe.
• Minimum 15-18 years’ experience, with Oil & Gas projects (fixed installations and FPSOs), with significant experience working as a Project Manager or Lead Engineer.
• Must have prior work experience with medium/ large sized brownfield and/or greenfield projects in the upstream Oil and Gas sector, in a similar role and possess a good understanding of project phases, milestones, deliverables, internal and external interfaces.
• Good leadership skills to manage and develop a team.

• You will serve as an Audit Liaison to the Fleet Cyber command enterprise's subordinate commands, field activities, and forward elements.
• You will provide expert technical advice and guidance to the Commander, Deputy Commander, and Senior Staff on inspections and investigations as the Inspector General.
• You will direct workflow and priorities to ensure timely accomplishment of the Inspector General Office's mission by mitigating risk and optimizing enterprise readiness through professional Inspector General products and services.
• You will supervise the Inspector General staff and perform technical, administrative, and management tasks and provide provide justification, direction, and allocation of resources (people, budget, material).
• You will develop the objectives, policy, and guidance for and maintain oversight of the command’s Inspection Program.
• You will conduct investigations, including hotline investigations, military whistleblower reprisal investigations, investigations in response to Congressional inquiries, and other investigations.
• You will review feedback, findings, and recommendations from the auditing agency and provide concurrence, as appropriate, for recommendations.