Total 464 Others level Quality Assurance / Control job vacancies in New York, New York, USA

Supervises a staff of Air Traffic Control Specialists that is responsible for carrying out air traffic control assignments within a geographic area.

Plans and assigns work to be accomplished by subordinate employees. Sets work priorities and schedules. Approves leave; gives advice, counsel, and instruction to employees on both work and administrative matters. Evaluates performance of employees and recommends performance ratings. Hears and resolves complaints from employees and refers group grievances and more serious unresolved complaints to a higher level manager. Identifies and arranges for developmental and other training needs of employees. Finds ways to improve production or increase the quality of the work directed. Adjusts staffing levels and work procedures to accommodate resource decisions made at higher levels. Recommends goals and objectives for the area and tracks accomplishments.

Communicates and reinforces diversity and EEO policies and programs in all areas of responsibility, including selections, training, and transfers. Supports and participates in the labor management partnership process, and fosters a work environment where all employees are treated in a fair and equitable manner.

The Operations Supervisor reports to the Operations Manager. Performance is evaluated upon the effectiveness with which assigned program objectives are achieved.

• Reviews guidance to develop Standard Operating Procedures that outline research compliance program operations.
• Prepares and submits research audit findings reports to researchers and presents findings at research review committee meetings.
• Conduct compliance audits and provide compliance training to study teams as indicated based on the audit findings.
• Participates in the planning and delivery of educational and informational research workshops/seminars for the purpose of informing, educating, and stimulating others concerning safe and compliant conduct of research.
• Acts as a compliance resource for researchers during pre- and post-approval process of their research projects to ensure adherence to compliance requirements.
• Acts as a resource during review and discussion of research proposals submitted from staff investigators, and reviewed by research review committees.
• Provides training to study teams with regard to IT systems used to enter project data to ensure compliance.
• Monitors quality of data and procedures and assures that human research subjects' rights are protected.

Job Responsibilities

• Work closely with all production team on the production process and oversee the day-to-day operations to ensure compliance with AVA, NEA HACCP guidelines and ISO standards
• Perform the creation and revision of corporate level quality documents that support GMP operations to ensure compliance with GMP guidelines
• Assist to contribute to the maintenance and continuous improvement of the Record Management systems and processes
• Assist to conduct regular risk assessment of corporate compliance against ever-changing Food Safety regulation to identify and work with relevant technology to develop mitigation plan
• Assist to develop Food Safety and Food Defends related standards
• Assist to develop Food Safety and Food Defends training materials
• Assist in driving the implementation of the Food Safety and Food Defends system and prerequisite program ingredient
• Conduct impact assessments and updates to QMS policies
• Manage QMS Management Review meetings according to local SOPs
• Maintain ISO / HACCP documentation and monitoring records update
• Handle all related operations audits
• Work closely with Marketing/ Sales and Production in packaging artwork development by providing product technical information eg. ingredient listings, nutrition labels that comply with labelling regulations of sales countries
• Update internal and external customers on the status of the quality issues
• Assist to ensure appropriate corrective and preventive actions are taken to eliminate detected non-conformance and the causes
• Provide Technical support to Marketing, R&D, Sales & Operations and Business Development teams in terms of product information enquiries from customers and country customs
• Other duties as assigned by the Head of Department

Job Requirements

• Able to communicate with all level and good interpersonal skills
• Knowledge in food labelling regulatory requirements pertaining to product claims, ingredient listing, nutrition labelling and etc.
• Meticulous with good attention to details and an effective change agent

Education, Experience & Training

• Min. Diploma/Degree in Food Technology, Food Science or its equivalent qualifications
• At least 1 year of experience working in SME food manufacturing environment
• With minimum 2 years in Quality Assurance or Quality Management, preferably in Food Industry
• Knowledge of HACCP, ISO22000 & GMP requirement will be advantage

THE ROLE
We are looking for a highly motivated and customer-focused team member to join the SAP Asia Pacific Cybersecurity and Compliance Advisory team as a Cybersecurity and Compliance Advisor. You will need to be comfortable with working independently, taking ownership as a subject matter expert and managing a steep learning curve in a dynamic sales environment.
The objective of the Asia Pacific Cybersecurity and Compliance Advisory team is to drive strategy and planning jointly with our customers and advocate for them on security, privacy, and compliance topics based on their business strategy. We aim to ensure our customers are happy to select, onboard, consume and renew SAP cloud solutions. We support the execution of Go-To-Market activities, and act as a trusted advisor to our customers and the SAP business, complemented by a focus on thought leadership and consolidation of expertise across the broad SAP Solution Portfolio and 3rd party solutions.

EXPECTATIONS AND TASKS
Security, privacy, and compliance is of paramount importance to our customers when investing in business applications, platforms and infrastructure in the Cloud.
The successful applicant will support sales and customer engagement teams, working to build trust with customers and helping them with their security, privacy, and compliance needs. The following are the key tasks required of this role:

1. Serve as an advisor to key customer technology and business stakeholders on security, privacy, and compliance topics, establishing trust-based relationships through active engagement and collaboration
2. Lead customer discussions, presentations, and workshops on SAP’s security, privacy, and compliance standards for both cloud and hybrid solutions
3. Coordinate closely with internal product and corporate security and compliance teams to act as a subject matter expert facilitating compliance and managing customer escalations
4. Provide expert support for responses to customer and partner questions, questionnaires, and risk assessments on security, privacy, and compliance topics
5. Apply and communicate comprehensive knowledge of relevant and continuously evolving security and privacy regulations and frameworks in Southeast Asia with a focus on Singapore
6. Educate SAP customers, partners, and internal teams on important security, privacy, and compliance aspects of SAP Cloud through regular interaction and creation of scalable digital assets

EDUCATION AND QUALIFICATIONS / SKILLS AND COMPETENCIES
• Executive Presence – Must have business communication skills, comfortable presenting to C-level executives and board members
• Cloud Competence – Strong working knowledge of security and compliance considerations of cloud and hybrid environments
• Lifelong Learner – Passion for self-development to gain in-depth understanding of the SAP security strategy and solution portfolio, regulatory requirements, industry trends, and executive presence

WORK EXPERIENCE
• Significant experience in cyber security or related technical and compliance domains
• Broad knowledge of SAP solutions across the portfolio preferred
• Knowledge of SAP Cloud security and compliance preferred
• CISSP, CCSP, CRISC or other major cyber security-related certification preferred

• Review contractor proposals to insure completeness and appropriateness.
• Prepare technical analysis or Pre-negotiation Objectives as required based on cost analysis of contractor's proposal and Government estimate.
• Develop construction methods and quality control techniques for projects that involve specialized facilities with special purpose technical equipment installation and structural features.
• Monitor progress on contract as represented by contractor prepared progress charts and network analysis systems.
• Conduct negotiations with contractor personnel on modifications and negotiated contracts.
• Review plans and specifications prior to contract advertisement to determine such things as practicability from a construction standpoint.

Supervises a staff of Air Traffic Control Specialists that is responsible for carrying out air traffic control assignments within a geographic area.

Plans and assigns work to be accomplished by subordinate employees. Sets work priorities and schedules. Approves leave; gives advice, counsel, and instruction to employees on both work and administrative matters. Evaluates performance of employees and recommends performance ratings. Hears and resolves complaints from employees and refers group grievances and more serious unresolved complaints to a higher level manager. Identifies and arranges for developmental and other training needs of employees. Finds ways to improve production or increase the quality of the work directed. Adjusts staffing levels and work procedures to accommodate resource decisions made at higher levels. Recommends goals and objectives for the area and tracks accomplishments.

Communicates and reinforces diversity and EEO policies and programs in all areas of responsibility, including selections, training, and transfers. Supports and participates in the labor management partnership process, and fosters a work environment where all employees are treated in a fair and equitable manner.

The Operations Supervisor reports to the Operations Manager. Performance is evaluated upon the effectiveness with which assigned program objectives are achieved.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

Research Fellow position is open in the research group of Assistant Professor Zhao Lin, at the Department of Electrical and Computer Engineering, National University of Singapore (NUS).

The Research Fellow will work closely with the Principal Investigator (PI) on theories and applications of learning-based control. The project will investigate and develop both deep reinforcement learning algorithms and conventional robust adaptive control methods, to develop safety-critical learning-based control algorithms that leverage the advantages of both model-based and model-free methods. In particular, the developed algorithms will be demonstrated through robust control of drones.

The initial appointment duration is 12 months, which can then be extended based on an evaluation at the end of the initial appointment.

The candidates will be responsible for conducting theoretical research and algorithm development. The candidates are expected to help the PI supervise junior PhD students as well.

The candidates should have a Ph.D. degree from a reputable university, with expertise in robust adaptive control, reinforcement learning theory, collision-avoidance trajectory optimization, etc.

A successful candidate should have a solid mathematical background (such as in calculus, linear algebra, optimization, etc.). Strong publication records in leading journals and conferences are required.

Qualifications

• Possess a Ph.D. Degree in either Electrical Engineering or strictly related (e.g., Mathematics, Computer, Communication, Mechanical, or Information Engineering).
• Have substantial research experiences in robust adaptive control, reinforcement learning, learning-based control, model predictive control, etc.
• Possess a strong academic record proved through coursework (especially math-intensive courses) and projects during his/her undergraduate and doctoral studies.
• Strong publication records in leading journals and conferences are highly valued
• Excellent communication skills as he/she is required to publish and present results at conferences and journals independently.
• Have well-established analytical and problem-solving skills, as documented by publications that are relevant to the field of reinforcement learning and control for robotics applications.
• Activity performed in world-class research environments is highly valued.

Under the general direction of the Principal Inspector or Supervisory Principal Inspector accomplishes the following duties:

A. Technical Administration

On a continuing basis, ensures assigned organizations are properly and adequately organized, staffed and equipped; establishes and conducts adequate training programs; maintains record keeping systems; and facilities and ensures procedures meet all regulatory requirements.

Chairs joint Federal Aviation Administration (FAA) and industry meetings. Maintains regular contact with organizations assigned and coordinates with top management officials. Requires or directs correction of any deficiencies/discrepancies and refuses or withdraws approval if they cannot be resolved.

Responsible for conducting enforcement investigations and preparation of final reports and recommendations on disposition. Performs or supervises the emergency suspension of certificates or cancellation of operations specifications. Conducts or directs the reexamination of certificated airmen or recertification of an operator or agency.

Conducts investigations of public complaints, congressional inquiries, and aircraft incidents and accidents. Provides verbal and/or written technical assistance to legal counsel, testifies at court trials and formal hearings, and gives dispositions.

Coordinates minimum equipment list (MEL) approvals with the principal inspector. Takes enforcement action in instances of noncompliance with the MEL.

Coordinates with geographic inspectors for the accomplishment of non-routine air carrier surveillance.
Assists Principal Inspector in the planning and implementation of certificate holders surveillance via usage of the appropriate safety system.

B. Certification

Approves/accepts or disapproves/rejects manuals and revisions to such manuals. May require amendments to previously approved manuals to accomplish the following: correct any conflict with regulatory requirements; eliminate unsafe practices: and/or improve the specificity of instruction.

Evaluates training programs to ensure that they meet the requirements of 14 CFR. Approves or disapproves these training programs including flight simulators, training devices, or other such equipment used in these programs.

Approves/disapproves designation of check airmen and makes recommendations on the appointment of designees.
Evaluates operations and facilities by on-site inspections and review of reports by geographic inspectors or others. Negotiates changes essential or desirable in their policies and procedures. Determines the appropriate methods and/or plans for securing corrective action and determines through on-site inspection or inspector reports the effectiveness of any action.

Evaluates and approves/disapproves requests to operate under conditions not previously authorized and may prescribe additional conditions and limitations as appropriate.

Approves the original issuance of operations specifications and issues original operating certificates. Approves amendments to operations specifications. Evaluates the safety of proposed changes in route or airport authorizations; prescribes any changes required before approval.

Directs or participates in flight evaluations to determine compliance with 14 CFR. Recommends changes that will be required prior to approval.

Duties and Responsibilities continued below

As an QUALITY ASSURANCE SPECIALIST, GS-1910-11, you will:

• Determine the proficiency and qualifications of certified personnel.
• Make decisions and recommendations on technical concerns presented by supervisors.
• Ensure that quality considerations are addressed and requirements achieved for all aircraft maintenance work and support functions to ensure end items perform as intended with reliability.
• Serve as the Quality Assurance Specialist for the planning, implementation and execution of a quality assurance program that includes the full range of quality principles, concepts, inspection techniques, surveillance and evaluation.
• Perform other duties as assigned

• YOU WILL/MAY:
• Ensure that regulated establishments produce a safe product by executing appropriate inspection methods, determining non-compliance with regulatory requirements, documenting noncompliance and initiating enforcement action, where warranted.
• Verify that meat and poultry slaughter and/or processing establishment's Sanitation Standard Operating Procedures (SSOP) and Hazard Analysis and Critical Control Point (HACCP) Plans meet regulatory requirements.
• Execute Sanitation Standard Operating Procedures (SSOP) and Hazard Analysis and Critical Control Point (HACCP) Plans effectively to prevent unsanitary conditions and adulteration of product.
• Review records, observe plant operations and conduct hands-on verification to ensure compliance with regulatory requirements and prepare detailed documentation (Non-Compliance Records) of non-compliance with regulatory requirements.
• Determine when regulatory control action is necessary. You will assess whether the plant's corrective or preventative actions are acceptable and effective, if there are trends in non-compliance, or if enforcement action is warranted.
• Conduct regulatory oversight activities inside plants in matters relating to other consumer protections (e.g., economic adulteration and misbranding).
• Have contact with plant managers, owners and others to explain legal and regulatory requirements, discuss operation of the plant's SSOP, HACCP plan and other food safety programs.
• Communicate and defend determinations on non-compliance issues and discuss plans for addressing non-compliance.
• Work with a variety of individuals to resolve problems, clarify differences of interpretation concerning HACCP and other food safety or consumer protection requirements.
• Advise other Agency inspectors, supervisors and officers on inspection and enforcement matters for which you are involved.
• Conduct various samplings, surveys and tests to obtain pertinent data on potential problem areas, industry trends, or other issues of current interest to the Agency.
• Be involved in performing health and safety verification sampling and tests for detection of specific microbes (e.g., salmonella, listeria, etc.), residues or contaminants.
• Assure that products approved for import are in full compliance with all applicable Federal regulations governing the importation of meat and poultry products.
• Authorize entry of all meat or poultry products considered to comply with Federal regulations or refuse entry of any products which violate any of the requirements for admission into this country.
• Coordinate with other Federal agencies (e.g., the Animal and Plant Health Inspection Service (APHIS) and U.S. Customs and Border Protection (CBP) on such matters as animal health restrictions and refused entry lots.

• Performs duties associated with the administration of the quality assurance provisions of contracts by designing, implementing, and maintaining a risk-based surveillance program and assessment plan.
• Identifies opportunities for process improvements through analysis of process measurement data.
• Serves as a member of a multi-functional or technical team. Responsible for implementing the overall Quality Program for a diversity of products and services in support of U.S. Government acquisition at one or more supplier’s facilities.
• Ensures contractor compliance with all requirements related to the design, manufacturing, repair, overhaul, and modernization of a variety of items for contractor and customer activities throughout the world.
• Independently performs audits/surveillance of contractor’s processes to ensure customer and contractual requirements are met.
• Investigates and provides data on customer complaints/concerns regarding contractor’s quality performance and processes which impact user satisfaction.
• Provides technical support to all other DCMA team members, assisting in the analysis of contract related issues to determine the best course of action to support the contractor and customers.

DESCRIPTION

The Regulatory Compliance Manager reports to the Project Director and shall be responsible for the effective design effort and coordination of the Sub-Contractor's discipline engineering professionals. The Regulatory Compliance Manager shall ensure that all de-signs comply with the requirements of the Work; that all Work is efficiently and effectively executed in accordance with the criteria, specifications and standards listed in the CONTRACT; and that the designs comply with safe and reasonable standards as accepted within the offshore oil and gas industry. The Regulatory Compliance Manager shall be responsible for his/her scope of work as given below:

DUTIES & RESPONSIBILITIES

• Develop Regulatory Permits & Consents Compliance Plan for the project including all active and passive statutory and Classification compliance requirements.
• Review Compliance Plan with Client and Class Authority, and report as necessary.
• Monitor changes in regulations to ensure the project is designed and installed to satisfy the correct edition of statutory and Classification requirements.
• Inform all disciplines of Regulatory and Classification requirements.
• Monitor the submission of Regulatory Compliance documentation and maintain master file of all Regulatory Permits & Consents.
• Monitor the issue of acceptance or permits by the Regulatory bodies and Classification society.
• Handover Regulatory Permits & Consents Compliance Plan to CLIENT/Operator indicating dates when permits and consents are required to be renewed.
• As necessary, participate with Project Management in negotiation and establishment of contracts for Class review and Regulatory Compliance at bid, FEED, or sanction stages of project.
• Provide Regulatory audit functions for accuracy of PO certification and inspection requirements within Regulatory Compliance scope (Vendor Compliance).
• Collect and promulgate Regulatory lesson learned during project.
• Support project team with respect to availability of appropriate / applicable codes and standards from Company reference library resource.

Comply with HSE requirements:

• Environmental Aspects & Impacts Assessment.
• OHS Hazardous & Risk Assessment.
• Follow HSE Regulations.

REQUIREMENTS

• Minimum educational requirements of a Bachelors’ and/or Masters’ degree in Mechanical / Chemical / petroleum Engineering or equivalent.
• Direct experience working on FPSO projects.
• Experience working with regulatory bodies in West Africa, China, and Europe.
• Minimum 15-18 years’ experience, with Oil & Gas projects (fixed installations and FPSOs), with significant experience working as a Project Manager or Lead Engineer.
• Must have prior work experience with medium/ large sized brownfield and/or greenfield projects in the upstream Oil and Gas sector, in a similar role and possess a good understanding of project phases, milestones, deliverables, internal and external interfaces.
• Good leadership skills to manage and develop a team.

The purpose of the position is to serve as an inspector of surface maintenance vehicles and equipment to ensure that physical and operating characteristics are within acceptable standards and specifications. Duties involve complex inspection work, requiring a wide variety of inspection processes and techniques, at remote worksites or field installations where a supervisor is not readily available. In these situations, work is performed very independently and decisions require a wide range of subjective judgments.

Duties & Responsibilities:

• Oversee and guide the Quality team to ensure effective quality control across the entire warehouse department.
• Collaborate with the Warehouse Manager to review and refine work instructions, ensuring clear and efficient operational procedures.
• Plan and conduct education and training programs to enhance the skills and knowledge of warehouse staff.
• Identify challenges in warehouse operations, analyze root causes, and implement solutions to improve quality and organizational efficiency.
• Develop and implement Kaizen (continuous improvement) strategies to enhance processes within the warehouse department.
• Plan and execute Internal Quality Assurance activities across all warehouses to maintain high-quality standards.
• Support the warehouse department in meeting and exceeding customer quality expectations.
• Manage the tasks and attendance of Quality team members, ensuring efficient and productive operations.
• Foster collaboration with managers and staff across Sankyu and other warehouses to optimize organizational performance.

Requirements:

• Diploma / Degree in Engineering and QMS related field with min 2 years of relevant experience
• Team player, good interpersonal and communication skills, able to work independently
• Good knowledge in ISO related management systems
• Candidate must possess at least Professional Certificate/NiTEC, Diploma/Advanced/Higher/Graduate Diploma, Bachelor's Degree/Post Graduate Diploma/Professional Degree in Engineering (Bioengineering/Biomedical), Engineering (Environmental/Health/Safety), Engineering (Mechanical), Engineering (Mechatronic/Electromechanical), Logistic/Transportation or equivalent.
• Working location: Tuas (**Shuttle service is provided from/to Tuas West Road MRT**)

A world empowered by autonomy. We build robotic vehicles to improve logistics safety, forge a greener Earth, and enhance human lives.

We are a closely-knit team aspiring to change the world through disruptive technology. We are innovators. We are tinkerers. We are problem-solvers. And we have a fair amount of magic dust up our sleeves. We have a plan for fleet-level deployment of autonomous vehicles, and we are looking for the best-of-the-best to join us in making this a reality.

About Venti Technologies

Based in the U.S. and Asia, Venti Technologies is the leader in safe-speed autonomous logistics systems, developing the future of goods transportation. Using rigorous mathematics, deep learning, and theoretically-grounded algorithms, Venti has a proprietary collection of autonomy technologies including a suite of powerful logistics algorithms. Venti’s proven value proposition of saving costs, increasing vehicle utilization, and improving safety is recognized by customers and driving growth. Launched in 2018, Venti brings together an unsurpassed team internationally. The company has autonomous systems deployed in Asia for industrial and logistics sites and a growing pipeline. Venti has offices in Cambridge (Massachusetts, USA), Suzhou (China), and Singapore – our Asian headquarters.

Position overview

We are seeking a highly skilled and motivated Senior Software Engineer to join our planning and control team. As part of this team, you will work on cutting-edge research and development of planning algorithms that enable autonomous systems to navigate complex environments safely and efficiently. This is an exciting opportunity for individuals who are passionate about advancing the field of autonomy and robotics. You will play a key role in the design, development, and optimization of behavior and motion planning systems while collaborating closely with cross-functional teams.

Role responsibilities

• Improve the existing software architecture and design the right software architecture for new components
• Design and develop clean, fast, reliable code
• Implement advanced features for autonomous vehicles
• Uphold code quality continuous integration, automated testing, and code reviews
• Drive software engineering best practices and processes
• Create technical design documents
• Mentor other software engineers

Required experience

• Bachelor's or Master's degree in Computer Science, Robotics, or related fields
• 5+ years experience writing production-quality code in modern C++
• Understanding of behavior planning, decision-making frameworks (e.g., finite state machines, behavior trees), or related AI techniques.
• Experience with Motion Planning algorithms, such as RRT, RRT*, and other graph-search based algorithms
• Experience developing in a Linux environment
• Strong organization and communication skills
• Flexible problem-solver
• Bonus experience
• Experience with ROS or other similar middleware
• Experience with real world safety critical applications
• Experience deploying software tools and/or metrics

Salary is commensurate with experience. We also offer world-class benefits, fantastic culture, flexible working arrangements, and a great international working environment. Come and join us!