Total 65 Others level Maintenance / Repair job vacancies in Cincinnati, Ohio

• Uses an Electronic Document Management and entitlement system to accesses a variety of documents.
• Performs indexing and splitting of documents.
• Reviews documents to ensure the information is accurate and complete per policy guidelines, and inputs information based on the type of document that has been scanned.
• Identifies invalid, illegible and missing information on the document(s) and appends document(s).
• Returns improperly routed documents to scanning for rerouting.

As an ELECTRONICS TECHNICIAN, GS-0856-11, you will perform the following duties:

1. Certifies assigned systems and sub-systems to ensure compliance with USAF and Federal Aviation Administration (FAA) established standards and safety requirements. ATCALS cannot be used unless certified by the employee. These systems include (insert specific system(s) here). Installs, modifies, tests, repairs, overhauls, calibrates, maintains, evaluates, and certifies performance of complex integrated and interfacing electronic systems. Ensures systems are operating at peak efficiency with minimum interruptions by performing optimization, analysis, periodic testing, and corrective procedures. Makes overall evaluation and determination as to whether or not the facilities are operating within prescribed standards and tolerances. Required to assist in formalized inspections of facilities and equipment. Assists in flight check inspection and joint acceptance of newly installed equipment and/or major modifications to the system(s) as required. Participates in the installation, modification, and final testing of all newly installed ATCALS and weather equipment. Collaborates with FAA flight inspection personnel regarding in-flight and/or ground check tolerances and makes on-the-spot determinations as to what actions to take to return system(s) to operable condition. Provides advice to supervisor on significant issues and problems related to work accomplishment. Develops and recommends changes in procedures and technical instructions to ensure more efficient operations and/or reduction in maintenance time. Maintains inspection and certification records that are required by technical orders, applicable regulations, and operating instructions. Annotates modifications on historical reports and records. Documents maintenance and training using computerized and manual methods. Analyzes equipment historical documents and maintenance records for trends, prepares reports on trend analysis, and recommends corrective actions. Carries out supplementary assignments that improve the performance of the assigned systems.

2. Determines when equipment malfunctions warrant shutdown of various systems. Acts as expert technical consultant to determine whether systems are operationally acceptable and safe within the prescribed standards and tolerances for air traffic control and air navigation. Diagnoses cause of equipment degradation and malfunctions through application of electronic theory, system analysis, use of test equipment, schematics, wiring diagrams, and mathematical analysis. Troubleshoots equipment to localize, isolate, and accomplish necessary repairs. Determines when equipment malfunctions warrant shutdown of various systems. Depending on the system involved and the impact of its loss, immediately notifies controlling sources such as air traffic controllers, weather forecasters, and the military chain of command. Performs corrective maintenance by diagnosing, isolating, and repairing complex system(s)/subsystem(s) malfunctions to restore services with a minimum delay.

3. Provides technical guidance, training, and assistance to other technicians and conducts on-the-job (OJT) training to apprentices in all phases of work. Conducts and documents OJT in all phases of equipment maintenance. Certifies task qualifications and schedules task training. Performs quality control inspections, analysis of trend data, and recommends corrective actions. Coordinates with civil and military agencies on matters affecting equipment operating specifications, procurement of components and test equipment, standardizations, modification, policy, and procedures. Submits technical order improvements, modification proposals, and deficiency reports as needed.

4. Utilizes safety practices and procedures following established safety rules and regulations and maintains a safe and clean work environment. Uses and assures proper fit of required safety equipment and clothing. Follows Federal and state rules when storing, using, handling, labeling, and disposing of hazardous materials and waste in accordance with environmental standards. Performs clean-up duties such as cleaning equipment, sweeping, straightening, and lining up tools and other property in the assigned area.

5. Performs other duties as assigned.

*The above duty description does not contain all details of the official position description. A copy of the entire position description can be found on FASCLASS by searching the position description PD#: (NGT5763000). https://acpol2.army.mil/fasclass/search_fs/search_fasclass.asp

VA Healthcare System Serving Ohio, Indiana, and Michigan (VISN 10) advocates for a Whole Health System of care in each of the Medical Centers. This is an approach to healthcare that empowers and equips people to take charge of their health and well-being and live their lives to the fullest. As an employee operating in a Whole Health System of care, you will operate in a model with three core elements, seeking to create a personalized health plan for each Veteran. This is done in the context of healing relationships and healing environments and a connection back to the Veteran's community. This aligns with the Veterans Health Administration Mission Statement to Honor America's Veterans by providing exceptional health care that improves their health and well-being.

Total-Rewards-of-an-Allied-Health-VA-Career-Brochure.pdf

Medical Technologist: vacareers.va.gov/wp-content/uploads/sites/5/Total-Rewards-of-a-Medical-Technologist-Career-Flyer.pdf

Duties:

• Performs diagnostic ultrasound examinations on multiple areas of the body, including, but not limited to thyroid, salivary glands, pancreas, liver, gallbladder, bile ducts, portal and hepatic veins, spleen, kidneys, bladder, scrotum, uterus/ovaries/adnexae (transabdominal and transvaginal), and soft tissues.
• Performs routine and complex vascular ultrasound examinations, including, but not limited to, upper and lower extremity (r/o DVT), carotid arteries, pseudoaneurysm evaluation, renal arteries, abdominal aorta, and inferior vena cava.
• Advises radiologists of significant abnormalities that would require their immediate attention and visualization while the patient is undergoing examination.
• Participates in the training of physicians so that they may acquire an understanding of the principles of ultrasound and how it relates to other diagnostic exams and the proper acquisition and ordering of ultrasound examinations.
• Coordinates and performs ultrasound orientation and competency of new sonography staff, which is a shared responsibility of current sonographers, to ensure new staff contributes to team production as quickly as possible. Sonographers shall advise radiology supervisor of the new staff's orientation and competency status. Instructs new sonography staff on imaging techniques, protocols, procedures, equipment use, etc.
• Protocols ultrasound orders for appropriateness. Makes recommendations to ordering provider for appropriate order based on clinical indication(s). Gathers related information via patient electronic medical record so that correlation of examinations to other studies may be made by the radiologist in diagnosis and recommendation of treatment.
• Develops and maintains patient preparation procedures and reminder letters so that outpatients and inpatient wards understand the proper preparations for ultrasound examinations to minimize delays of examinations.
• Maintains effective control of the ultrasound area by coordinating, planning, and help organizing the daily work potential to expedite workflow patterns within the departments. Uses medical center software to help aid in job functions.
• Maintains a quality assurance program of the ultrasound scanning equipment and monitor. Exercises extreme caution in the handling and safeguarding of all equipment. Perform operator preventive maintenance and care of equipment. Must recognize and report major equipment malfunctions within a timely manner to the radiology supervisor.
• Complete daily gel warmer temperature log. Take appropriate actions if temperature is out of normal range.
• Communicates effectively and professionally with all internal and external customers.
• Performs others duties as assigns.

The Cincinnati VA Medical Center (CVAMC) is a two-division campus located in Cincinnati, OH and Fort Thomas, KY serving 15 counties in Southwest OH, Northern Kentucky, and Southeast Indiana with 6 Community Based Outpatient Clinics located in Bellevue, KY; Florence, KY; Lawrenceburg, IN; Hamilton, OH; Clermont County, OH, and Georgetown, OH. The CVAMC also supports two off main campus locations in the Cincinnati area via an Eye Center and Mental Health Outreach Community Division.

Major Duties: This position serves as the Lead Supply Technician (Medical) for the Medical Supply Distribution (MSD) areas of Logistics Service within the VA Health Care System. As a Lead Supply Technician, you will ensure supplies and materials are distributed to all areas serviced by Logistics to provide wards, clinics, operating rooms, secondary storage locations, and other hospital facilities with supplies and material including but not limited to, sterile and non-sterile medical supplies, instrument sets, and equipment. Major duties and responsibilities include:

• Distributes and balances workload among employees in accordance with established workflow or job specialization and assures timely accomplishment of assigned workload;
• Monitors status and progress of work and makes day-to-day adjustments in accordance with established priorities;
• Maintains current knowledge and answers questions of other employees on procedures, policies, directives, or other guidelines as necessary and obtains needed information or decisions from supervisor on problems;
• Maintains stock at primary and secondary inventory locations for all clinical and administrative services, including pulling stock inventory and material from inventory for delivery, replenishing stock inventory, interacting with customers to resolve issues, maintaining records on stock levels, etc.;
• Performs inventory using bar code equipment and resolves differences between records and physical count of stock;
• Ensures areas are cleaned in accordance with aseptic principles as published in infection control guidelines, local Standard Operating Procedures (SOPs), and Joint Commission standards as scheduled;
• Receives supplies and materials into the catchment area including unpacking/uncrating supplies from shipping cartons; storing supplies and materials; and ensuring sterility and integrity of the supplies and material as well as the data integrity of the inventory management system; and
• Works with clinical and administrative customers as well as outside vendors with tact and diplomacy to coordinate work activities and resolve operating issues pertaining to supply management requirements.

• Full working knowledge of the maintenance functions associated with roads, trails, and grounds, such as filling potholes in roads and parking lots, installing drainage structures on trails, and various landscaping tasks.
• Uses a variety of equipment such as pneumatic tampers, chainsaws, leaf blowers, push and riding mowers, 4-wheel drive trail vehicles, and other various hand and power tools.
• Operates gasoline and diesel-powered vehicles up to 26,000 pounds GVW while pulling trailer up to 10,000 pounds GVW.
• Performs maintenance, construction, alterations, and repairs on structures such as footbridges, boardwalks, staircases, picnic tables, benches, signs, parking lot wheel-stops, repairing and maintaining roads and parking lots using dump trucks, wheelbarrows, asphalt cold-patch, gravel, and sand.
• Maybe involved in constructing and maintaining trails using chainsaw and/or pole saw, heavy-duty push mowers, various rigging equipment, Pulaski, pick mattock, and shovel.
• May be involved in assisting in maintenance of way of work on the Cuyahoga Valley National Scenic Railroad which includes equipment operations, mowing along the railroad, clearing line of sights, tree trimming and removal. Incumbent doing maintenance way of work is subject to mandatory pre-employment drug and alcohol testing and random drug and alcohol testing per the regulations established by the Federal Railroad Authority.
• Performs routine maintenance and minor repairs to vehicles and equipment.

• Plans work to be accomplished by subordinates, establish priorities and prepare schedules for completion of work.
• Makes changes in the organization of work and assignment of functions or duties to positions as necessary to fully use employee skills, accommodate changes in workload, improve work flow, reduce back logs and provide smooth flow distribution.
• Provides advice and guidance on more complex/difficult matters of the military processing realm, provides instructions and guidance for operation of the automated system.
• Examines completed actions to ensure and determine validity, propriety, accuracy, and adequacy of action taken.
• Researches and uses performance measures/standards to evaluate and monitor operational performance of assigned functional area.
• Gives informal training and cross-training on military pay entitlements, regulatory guidance, finance operating procedures and transactions processing.
• For vacancies filled at less than the full performance level of the position, duties will be developmental in nature.

As a SURFACE MAINTENANCE MECHANIC, WG-5801-10, you will perform the following duties:

(1) Troubleshoots, performs maintenance and major repairs on heavy-duty mobile equipment, combat, tactical and automotive vehicles. This may include self-propelled artillery, tracked cargo and personnel carriers, road graders, mobile cranes, front loaders, conveyors, bulldozers, power shovels, compressors, generators, tanks, tracked combat vehicles, sedans, buses, all terrain vehicles, trucks, semi trailers, forklifts, tractors, and accessory equipment. Troubleshoots, repairs and overhauls major systems to include internal combustion engines, turbine engines, automatic and non-automatic transmissions, heavy duty drive line systems, and hydraulic utility systems and controls. Makes repairs to assemblies and components such as voltage regulators, generators/alternators, brake cylinders, etc. Performs work in accordance with modification work orders, technical manuals, lubrication orders, maintenance bulletins, regulations or management policies. May repair a variety of more complex major systems to include engines, cross drive or similar multi-system transmissions and a variety of intricate fuel injection systems.

(2) Troubleshoots equipment and diagnoses the cause of mechanical failures by means of visual and auditory checks and/or uses test equipment such as engine analyzers, compression testers, voltmeters, ohmmeters, pressure gauges, and computer diagnostic tools. Utilizes embedded diagnostics in equipment and a wide variety of original equipment manufacturer system analyzers in order to determine the exact nature or extent of repair. Determines what adjustments may be necessary to complete work orders, and whether any additional repairs other than those specified or indicated on the work order are necessary.

(3) Removes and disassembles engines and major assemblies, sub-assemblies, components, and fuel, hydraulic, and oil pressure systems. Makes the appropriate repairs, overhaul, or modifications in accordance with the proper repair specifications and procedures. Reassembles engines and other systems, and adjusts, tests, and reinstalls in vehicles and equipment as necessary. Makes adjustments and repairs to electrical and suspension systems. May install pistons, sleeves, rings, bearings, rods, crankshafts, timing gears, and rocker arms. May be required to perform fuel injection equipment repair, overhaul, rebuild, and calibration duties utilizing a variety of complex test and calibration equipment.

(4) Independently performs repairs and maintenance functions in remote locations that can be accomplished by removing, cleaning, reinstalling, or replacing defective parts of components and systems such as injectors, leaking wheel cylinders, corroded mufflers, fuel tanks, brake cylinders and worn brake shoes, voltage regulators, generators, injector pumps, and fuel pumps. Provides technical guidance and specialized team leadership to lower grade employees within the team. Assists lower grade mechanics in performing major repair work. May provide Field and limited Sustainment maintenance at unit locations as part of a "contact team." Recovers and evacuates inoperable vehicles from the unit location of breakdown. May assist higher graded mechanics in repairing a variety of interconnected systems such as electrical, air and hydraulic systems, complex state of the art electrical and electronic systems that use specialized diagnostic equipment to identify problems, complex fuel injection systems and other similar complex systems.

(5) Performs other duties as assigned.


*The above duty description does not contain all details of the official position description. A copy of the entire position description can be found on FASCLASS by searching the position description (PD#:D1194000). https://acpol2.army.mil/ako/fasclass/search_fs/search_fasclass.asp

As a SUPERVISORY SURFACE MAINTENANCE SPECIALIST, GS-1601-12, you will perform the following duties:

(1) Directs, coordinates, and oversees the work of subordinate supervisors and employees. Plans and schedules work to be accomplished by subordinates, sets and adjust short-term priorities. Assigns work in consideration of employee skills and mission requirements. Exercises significant responsibilities dealing with headquarters' personnel, senior commanders, and staff officers of other units, organizations, and commands. Advises high-ranking management of functions, activities and services provided. Advises, counsels, or instructs employees on work and administrative matters. Makes and/or resolves decisions on work problems presented by subordinate supervisors. Develops performance standards. Evaluates subordinate supervisors' work performance and serves as a reviewing official of subordinates supervisors' workers. Improves production or increases the quality of work directed. Interviews candidates and recommends appointment, promotion, or reassignment to positions in the unit. Makes or approves selections for subordinate non-supervisory positions and recommends selections for subordinate supervisory positions. Hears and resolves employee complaints and refers group grievances, or more serious unresolved complaints, to a higher-level supervisor. Approves expenses comparable to within-grade increases, employee travel, etc. Recommends awards or bonuses for nonsupervisory personnel and changes in position classification. Provides technical supervision for field and sustainment maintenance on surface equipment issued to the ARNG.

(2) Ensures that maintenance facilities manage workflow to attain established backlog goals. Using the current automation or other programs, monitors maintenance activities OPTEMPO funds usage to ensure proper expenditure and resource management. Ensures expendable, non-expendable, and durable property is authorized, maintained, and properly accounted for. Nominates subordinate supervisors to manage maintenance facilities. Ensures established ratios for direct and indirect employees are maintained. Evaluates performance, provides counsel, advice and instructions for immediate subordinates. Hears grievances not settled at lower levels. Conducts or participates in reviews of serious disciplinary cases. Reviews performance standards, position descriptions, and proposed training plans prepared by subordinate supervisors. Reviews reports and recommendations made by subordinates for proper interpretations and application of established policies, regulations and procedures.

(3) Develops, implements, and oversees the quality assurance program for assigned surface maintenance facilities to ensure production goals as established and attained. Oversees and participates with other involved officials in developing plans and procedures for assuring quality and reliability of work products. Reviews work instructions, technical data, inspection methods, and test procedures to assure adequacy. Reviews quality and flow of materials and supplies required to support maintenance activities. Confers with supported units to resolve problems. Provides direction to ensure correction of noted deficiencies. Publishes technical information letters on quality assurance techniques and objectives. Responsible for monitoring manpower utilizations ensuring work methods, procedures, and allocations are made to best accomplish program objectives within available resources.

(4) Provides technical guidance to assigned maintenance activities through coordinated assistance and/or evaluation visits. Plans ongoing unit visits throughout the state. Visits assigned surface maintenance facilities on a regular basis to promote efficient operations, and compliance in accordance with current regulations and policies. Ensures the state maintenance support plan is reviewed and updated to reflect the most current data. Plans and develops schedules and agendas for shop supervisors' training and meetings and coordinates details to ensure an effective meeting.

(5) Performs other duties as assigned.

*The above duty description does not contain all details of the official position description. A copy of the entire position description can be found on FASCLASS by searching the position description (PD#:D1251000). https://acpol2.army.mil/ako/fasclass/search_fs/search_fasclass.asp

Duties include, but are not limited to:

• Installs new roofs of all types by removing old roofs and preparing surface to accept new roofing material as slate, tile, asphalt shingles, and rubber roofing.
• Determines roofing damage and makes necessary repairs.
• Prepares, installs, and maintains rubber roofing.
• Utilizes roof jacks, roof removing tools, tile cutters, and all tools of the trade.
• Fabricates and installs flashings, roof drains, gutters, downspouts, and firewall vents.
• Replaces sheathing, boards, and joists. Operates crane, truck, tractor, or motor vehicle when performing roofing work.
• Performs duties of a journeyman carpenter, woodcrafter, painter, mason, cement finisher, roofer and drywall finisher which involves construction, alteration, repair, maintenance or modification of items and structures.
• Plans and lays out masonry work involving maintenance, repair and construction on structures consisting of brick, block, or stone.
• Plans and completes projects from initial layout to final assembly or installation.
• Planning and layout work is difficult as instructions are most often less specific, requiring incumbent to measure accurately and to fill in the gaps on incomplete blueprints, sketches, and work requests and also because finished items are usually closely joined to other assemblies to strengthen and support or to provide air and weather-tight assemblies.
• Repairs and modifications are complicated by the requirement to know the size, shape, and purpose of the completed structure in order to measure, cut, and fit specific items.

Duties include, but are not limited to:

• Installs new roofs of all types by removing old roofs and preparing surface to accept new roofing material as slate, tile, asphalt shingles, and rubber roofing.
• Determines roofing damage and makes necessary repairs.
• Prepares, installs, and maintains rubber roofing.
• Utilizes roof jacks, roof removing tools, tile cutters, and all tools of the trade.
• Fabricates and installs flashings, roof drains, gutters, downspouts, and firewall vents.
• Replaces sheathing, boards, and joists. Operates crane, truck, tractor, or motor vehicle when performing roofing work.
• Performs duties of a journeyman carpenter, woodcrafter, painter, mason, cement finisher, roofer and drywall finisher which involves construction, alteration, repair, maintenance or modification of items and structures.
• Plans and lays out masonry work involving maintenance, repair and construction on structures consisting of brick, block, or stone.
• Plans and completes projects from initial layout to final assembly or installation.
• Planning and layout work is difficult as instructions are most often less specific, requiring incumbent to measure accurately and to fill in the gaps on incomplete blueprints, sketches, and work requests and also because finished items are usually closely joined to other assemblies to strengthen and support or to provide air and weather-tight assemblies.
• Repairs and modifications are complicated by the requirement to know the size, shape, and purpose of the completed structure in order to measure, cut, and fit specific items.

• Heavy lifting, 50 pounds and over.
• Heavy carrying, 50 pounds and over.
• Reaching above shoulder.
• Walking, standing, crawling, kneeling, repeated bending.
• Climbing with legs only or climbing with the use of legs and arms.

• Plan and coordinate medical emergency management exercise programs for the medical group with other entities.
• Execute emergency management exercises to practice and improve emergency response plans and capabilities to include drills, tabletop, full-scale or functional exercises and workshops.
• Develop and maintain relations with tenant unit commanders and officials from federal, state and local emergency response organizations to gain their support and participation in installation exercises.
• Establish and provide emergency exercise directives and/or training to installation and external personnel on all-hazard scenarios or national emergency exercises.
• Evaluate exercises to identify points of conflict and develop workable solutions for improvement.
• Write and maintain the Medical Contingency Response Plan to post information on processes or procedures for handling actual or hypothetical (for exercises) natural or manmade disasters.
• Act as Medical Readiness Action Officer during emergencies and large special events maintaining communications and assisting with development of recommended response actions.

As a TRAINING TECHNICIAN, GS-1702-11, you will perform the following duties:

1) Formulates, oversees and evaluates the overall training programs for the command. Develops short and long term training plans that support the commander's training guidance. Issues instructions and procedures to subordinate organizations for the conduct of activities which meet the commander's training guidance and directives of higher headquarters. Establishes and ensures the conduct of a training evaluation program for subordinate organizations. Conducts and/or coordinates staff assistance visits and command level inspections in the area of training, physical security and readiness. Evaluates the mission essential task lists of subordinate organizations to ensure conformity with higher headquarters, commander's guidance and intent, Army doctrine, and regulatory requirements.

2) Recommends modifications to the command's mission essential task list. Reviews training evaluation and inspection reports to identify systemic problems and trends. Determines and formulates needed revisions or improvements to training activities. Reviews training plans and schedules of subordinate organizations for approval and revision as necessary to ensure compliance with yearly training guidance. Provides technical guidance and assistance to subordinate commanders or other operations and training personnel pertaining to scheduling and conducting training. Directs the scheduling and ensures the execution of special training courses on a variety of subjects (i.e., communications procedures, leadership courses, marksmanship training, etc). Coordinates with external training, evaluation and assistance organizations for the conduct and evaluation of Army training to include Field Training Exercises (FTX), Command Posts Exercises (CPX), etc.

3) Develops and prepares annual operational and training budget requirements. Sub-allocates funding to subordinate organizations in accordance with annual funding allowance and established priorities. Approves requests for reallocation based on the commander's guidance and priorities and changes in scheduled training events. Evaluates, develops, and maintains command level policies commensurate with training directives issued by all echelons of command and the commander's guidance.

4) Evaluates organizational readiness reports and prepares recommendations for improvement/modification to organizational training programs. Analyzes proposed changes and determines effects on organizational readiness and the ability of organizations to accomplish assigned missions. Develops and reviews requests for changes to future authorization documents. Coordinates with other staff elements and subordinate organizations for the review and analysis of force modernization and future organizational structure and allowances.

5) Develops, reviews and adjusts command level deployment and contingency operation plans. Provides technical guidance and assistance to subordinate units in the development of deployment and redeployment plans for use in responding to local/state/national emergencies, homeland security missions, and anti-terrorism/force protection.

6) Directs scheduling and coordination for the use of training sites and facilities. Ensures coordination with logistical personnel for the availability of required equipment and supplies for training activities. Reviews and forwards requests for the local procurement and acquisition of training aids, manuals, or other instructional material not available within normal supply channels. Maintains liaison with personnel at local, state or federally operated training sites. Identifies the requirement for, directs, and/or approves organizational requests for initiation, coordination and maintenance of usage agreements for local/private training areas. Conducts or directs preliminary environmental impact assessments for training sites/areas and requests formal assessments through channels to state level environmental personnel.

7) Develops and implements Risk Management plans and programs for the command. Reviews Risk Management assessments, plans, and policies of subordinate units and provides guidance and recommendations in accordance with the commander's guidance and regulatory requirements. Develops safety/accident prevention policies and ensures implementation. Conducts safety inspections and assistance visits to subordinate units.

8) Performs other duties as assigned.


*The above duty description does not contain all details of the official position description. A copy of the entire position description can be found on FASCLASS by searching the position description (PD#:D2065000). https://acpol2.army.mil/ako/fasclass/search_fs/search_fasclass.asp

As a SURFACE MAINTENANCE MECHANIC, WG-5801-10, you will perform the following duties:

(1) Troubleshoots, performs maintenance and major repairs on heavy-duty mobile equipment, combat, tactical and automotive vehicles. This may include self-propelled artillery, tracked cargo and personnel carriers, road graders, mobile cranes, front loaders, conveyors, bulldozers, power shovels, compressors, generators, tanks, tracked combat vehicles, sedans, buses, all terrain vehicles, trucks, semi trailers, forklifts, tractors, and accessory equipment. Troubleshoots, repairs and overhauls major systems to include internal combustion engines, turbine engines, automatic and non-automatic transmissions, heavy duty drive line systems, and hydraulic utility systems and controls. Makes repairs to assemblies and components such as voltage regulators, generators/alternators, brake cylinders, etc. Performs work in accordance with modification work orders, technical manuals, lubrication orders, maintenance bulletins, regulations or management policies. May repair a variety of more complex major systems to include engines, cross drive or similar multi-system transmissions and a variety of intricate fuel injection systems.

(2) Troubleshoots equipment and diagnoses the cause of mechanical failures by means of visual and auditory checks and/or uses test equipment such as engine analyzers, compression testers, voltmeters, ohmmeters, pressure gauges, and computer diagnostic tools. Utilizes embedded diagnostics in equipment and a wide variety of original equipment manufacturer system analyzers in order to determine the exact nature or extent of repair. Determines what adjustments may be necessary to complete work orders, and whether any additional repairs other than those specified or indicated on the work order are necessary.

(3) Removes and disassembles engines and major assemblies, sub-assemblies, components, and fuel, hydraulic, and oil pressure systems. Makes the appropriate repairs, overhaul, or modifications in accordance with the proper repair specifications and procedures. Reassembles engines and other systems, and adjusts, tests, and reinstalls in vehicles and equipment as necessary. Makes adjustments and repairs to electrical and suspension systems. May install pistons, sleeves, rings, bearings, rods, crankshafts, timing gears, and rocker arms. May be required to perform fuel injection equipment repair, overhaul, rebuild, and calibration duties utilizing a variety of complex test and calibration equipment.

(4) Independently performs repairs and maintenance functions in remote locations that can be accomplished by removing, cleaning, reinstalling, or replacing defective parts of components and systems such as injectors, leaking wheel cylinders, corroded mufflers, fuel tanks, brake cylinders and worn brake shoes, voltage regulators, generators, injector pumps, and fuel pumps. Provides technical guidance and specialized team leadership to lower grade employees within the team. Assists lower grade mechanics in performing major repair work. May provide Field and limited Sustainment maintenance at unit locations as part of a "contact team." Recovers and evacuates inoperable vehicles from the unit location of breakdown. May assist higher graded mechanics in repairing a variety of interconnected systems such as electrical, air and hydraulic systems, complex state of the art electrical and electronic systems that use specialized diagnostic equipment to identify problems, complex fuel injection systems and other similar complex systems.

(5) Performs other duties as assigned.


*The above duty description does not contain all details of the official position description. A copy of the entire position description can be found on FASCLASS by searching the position description (PD#:D1194000). https://acpol2.army.mil/ako/fasclass/search_fs/search_fasclass.asp

As a SURFACE MAINTENANCE MECHANIC, WG-5801-10, you will perform the following duties:

(1) Troubleshoots, performs maintenance and major repairs on heavy-duty mobile equipment, combat, tactical and automotive vehicles. This may include self-propelled artillery, tracked cargo and personnel carriers, road graders, mobile cranes, front loaders, conveyors, bulldozers, power shovels, compressors, generators, tanks, tracked combat vehicles, sedans, buses, all terrain vehicles, trucks, semi trailers, forklifts, tractors, and accessory equipment. Troubleshoots, repairs and overhauls major systems to include internal combustion engines, turbine engines, automatic and non-automatic transmissions, heavy duty drive line systems, and hydraulic utility systems and controls. Makes repairs to assemblies and components such as voltage regulators, generators/alternators, brake cylinders, etc. Performs work in accordance with modification work orders, technical manuals, lubrication orders, maintenance bulletins, regulations or management policies. May repair a variety of more complex major systems to include engines, cross drive or similar multi-system transmissions and a variety of intricate fuel injection systems.

(2) Troubleshoots equipment and diagnoses the cause of mechanical failures by means of visual and auditory checks and/or uses test equipment such as engine analyzers, compression testers, voltmeters, ohmmeters, pressure gauges, and computer diagnostic tools. Utilizes embedded diagnostics in equipment and a wide variety of original equipment manufacturer system analyzers in order to determine the exact nature or extent of repair. Determines what adjustments may be necessary to complete work orders, and whether any additional repairs other than those specified or indicated on the work order are necessary.

(3) Removes and disassembles engines and major assemblies, sub-assemblies, components, and fuel, hydraulic, and oil pressure systems. Makes the appropriate repairs, overhaul, or modifications in accordance with the proper repair specifications and procedures. Reassembles engines and other systems, and adjusts, tests, and reinstalls in vehicles and equipment as necessary. Makes adjustments and repairs to electrical and suspension systems. May install pistons, sleeves, rings, bearings, rods, crankshafts, timing gears, and rocker arms. May be required to perform fuel injection equipment repair, overhaul, rebuild, and calibration duties utilizing a variety of complex test and calibration equipment.

4) Independently performs repairs and maintenance functions in remote locations that can be accomplished by removing, cleaning, reinstalling, or replacing defective parts of components and systems such as injectors, leaking wheel cylinders, corroded mufflers, fuel tanks, brake cylinders and worn brake shoes, voltage regulators, generators, injector pumps, and fuel pumps. Provides technical guidance and specialized team leadership to lower grade employees within the team. Assists lower grade mechanics in performing major repair work. May provide Field and limited Sustainment maintenance at unit locations as part of a "contact team." Recovers and evacuates inoperable vehicles from the unit location of breakdown. May assist higher graded mechanics in repairing a variety of interconnected systems such as electrical, air and hydraulic systems, complex state of the art electrical and electronic systems that use specialized diagnostic equipment to identify problems, complex fuel injection systems and other similar complex systems.

(5) Performs other duties as assigned.

*The above duty description does not contain all details of the official position description. A copy of the entire position description can be found on FASCLASS by searching the position description (PD#:D1194000). https://acpol2.army.mil/ako/fasclass/search_fs/search_fasclass.asp

VA Careers - Licensed Practical Nurse: https://youtube.com/embed/Ae85IP1Oiz4
Total-Rewards-of-an-Allied-Health-VA-Career-Brochure.pdf
Licensed Practical Nurse - vacareers.va.gov/wp-content/uploads/sites/5/Total-Rewards-of-a-LPN-Career-Flyer.pdf

Provides nursing care for adults with population specific needs by incorporating pertinent physical, psychosocial, and cultural needs into the patient plan of care.
Promotes the incorporation of current patient care data in actively contributing to the development of the patient's overall health plan and in carrying out assigned nursing interventions.
Demonstrates nursing practice with remote supervision of a RN, physician, or licensed independent provider.
Collaborates with and support the RN, physician, or licensed independent provider with appropriately prioritizing the overall patient care needs and adjusts plans for care delivery pm.
Proactively assists the RN, physician, or licensed independent provider in addressing patient's needs for medications/treatments, accurately preparing and administering medications/treatments accurately and promptly under the general supervision of a RN, physician, or licensed independent provider per policies/procedures and including the patient's response to the medication/treatment
Demonstrates understanding of the effects and/or subtle signs and symptoms of potential reactions caused by medications, treatments, and procedures.
Promptly records and reports these observations and initiates appropriate, prescribed interventions.
Performs personal care, diagnostic support duties and treatments according to procedure with minimal direction from the professional nurse in a timely manner.
Completes required patient care documentation and records significant observations and actions utilizing the nursing process in a clear and concise manner.
Demonstrates the ability to assist RN, physician, and/or licensed independent provider to appropriately prioritize overall patient care needs and adjust plans for care delivery.
Makes astute observations of subtle, less obvious changes, both physical and emotional, in patient's condition, and accurately and thoroughly documents care delivered and patient's response to care that could require immediate modification of the patient's care plan.
Demonstrates the knowledge and skill to recognize potential urgent/emergent patient care situations, seeks assistance of the RN, physician, or licensed independent provider for team interventions and effectively intervenes, as directed to assure safe and therapeutic patient care.
Supports the RN, physician, and licensed independent provider in monitoring the practice of unlicensed or non-medical staff in patient care delivery. Promptly reports care that deviates from normal practice patterns to the registered nurse, physician, and independent provider so that care issues may be addressed immediately
Performs Telehealth imaging, including Tele-Eye screening (Teleretinal Imaging and Tonometry), Teledermatology, Telewound care and other Telehealth programming, as identified and referred by the primary care provider, other providers, and the imager.
Facilitation of the clinical, business, scheduling and technical aspects for real-time Telehealth applications.
Conducts quality control procedures on equipment and products and maintains proper records for quality control reports and workload reporting.
Coordinates with Biomedical and Information Technology staff for the installation upgrade of hardware and software for all Telehealth technologies.

Work Schedule: Monday - Friday; 8am - 4:30pm
Recruitment Incentive (Sign-on Bonus): Not Authorized
Permanent Change of Station (Relocation Assistance): Not Authorized
Pay: Competitive salary and regular salary increases
Paid Time Off: 37-50 days of annual paid time offer per year (13-26 days of annual leave, 13 days of sick leave, 11 paid Federal holidays per year)
Selected applicants may qualify for credit toward annual leave accrual, based on prior [work experience] or military service experience.
Parental Leave: After 12 months of employment, up to 12 weeks of paid parental leave in connection with the birth, adoption, or foster care placement of a child.
Child Care Subsidy: After 60 days of employment, full time employees with a total family income below $144,000 may be eligible for a childcare subsidy up to 25% of total eligible childcare costs for eligible children up to the monthly maximum of $416.66.
Retirement: Traditional federal pension (5 years vesting) and federal 401K with up to 5% in contributions by VA
Insurance: Federal health/vision/dental/term life/long-term care (many federal insurance programs can be carried into retirement)
Telework: Telework is at the hiring manager's discretion. Details can be discuss during the interview.
Virtual: This is not a virtual position.
Functional Statement #: 93260-A
Permanent Change of Station (PCS): Not Authorized