Total 5 Manufacturing / Production job vacancies in Grand Haven, Michigan

Acorn by Synergie is seeking a Telescopic Fork Lift Driver for a large housing project in Milford Haven.

The successful candidate will be required to supply trades throughout the day and help around the site when needed.

Applicants must have the following:

* Valid CPCS card for Telescopic (essential).
* Previous experience.
* Full PPE.
* 2 construction based references.

Desired skills:

* Proven background on a busy housing construction site.
* Capable of supplying materials to various trades throughout the site.
* To be able to assist Site Managers as and when required.


Apply online or call Jack on 07584 523035.

Acorn by Synergie acts as an employment business for the supply of temporary workers.

Proud member of the Disability Confident employer scheme

The major duties of the Motor Vehicle Operator will include, but are not limited to:

• Operating the following vehicles on a regular basis: Sedans (4,000 lb), Mini-Vans (6,050 lb), full size vans with wheelchair lifts (8,500 lb), John Deer Tractor, Model 5525, 105 Hp. 95 PTO Hp., Toro zero turn mower, shuttle passenger bus MGVWR - 25,850 lbs. 25 passengers, dual use vehicle - handicapped passenger bus MGVWR-32,000 lbs. 34 passenger (CDL required), emergency multi-use vehicle MGVWR-39,420 lbs. (CDL required), Bobcat Tool Cat 5600 F-Series vehicles and attachments, 3/4 ton trucks with snow plow, and emergency management trailers MGVWR over 10,000 lbs. (CDL required).
• Transporting employees throughout the southeastern part of the state of Michigan, primarily the Metro Detroit area.
• Operating vehicles of all sizes, some of which will require a state-issued commercial driver's license (CDL).
• Maintaining an accurate log sheet of all motor vehicles.
• Completing a pre and post operator check of vehicles and equipment for proper fluid levels (water, windshield washer, oil, brake and transmission) whenever required for use.
• Completing a check of air pressures, conditions of tires, etc.
• Abiding by all state and local traffic rules, regulations and exercises appropriate precautions for the safe operation of all motor vehicles and equipment in the safe transportation of passengers.
• Completing all motor vehicle tickets.
• Performing preventive maintenance duties set up by the facility and the General Services Administration.

Duties include but are not limited to the following:

• Performs duties relative to the care, maintenance, protection and preservation of grounds, ornamental beds, trees, shrubs, and grass in an assigned area.
• Prepares the soil in areas where flowers and seeds are to be planted.
• Determines the proper amount of plants, seeds, fertilizer, lime or other materials required for an area.
• Selects and applies the correct fungicide, insecticide, or herbicide to control plant insects, diseases and/or weeds.
• Plants and transplants shrubbery and trees and thins flowers to promote proper growth and enhance appearance. Applies mulch and/or decorative stone to ornamental beds and weeds, as required.
• Reseeds areas as necessary to promote fullest growth: Salvages, labels, and stores bulbs and seed for the following year.
• Prunes and trims shrubbery and trees which require shaping, thinning and removal of dead/diseased/unsightly branches.
• Operates mechanical powered equipment such as riding and push mowers, edgers, trimmers, chain saw, blowers, cultivator, snow plow, and various hand tools.
• May be required to operate a small forklift to retrieve and/or store supplies used for gardening or grounds maintenance.
• Operates pick-up truck with trailer to transport personnel, equipment, supplies and other materials to and from worksite within the installation.
• Ensures vehicle is properly and securely loaded. Performs operator maintenance such as checking oil and water and completes trip tickets and accident reports as necessary. Reports vehicle malfunctions to supervisor

***THIS IS A TITLE 32 NATIONAL GUARD POSITION THAT REQUIRES MILITARY MEMBERSHIP***

This position is located in the Joint Forces Headquarters-State, Logistics Directorate (J-4/G-4), Surface Maintenance Facility. The purpose of this position is to plan, schedule, control, and monitor the status of equipment maintenance; and to assist a higher-graded Production Controller.

DUTIES
1. Establishes plans, schedules, and controls the maintenance and repair of a variety of vehicles and equipment such as combat vehicles, heavy-duty engineering and mobile equipment, tracked vehicles, towed and self-propelled artillery, communications and electronic equipment, guided missile systems, and small arms. Implements maintenance plans and monitors progress of accomplishments.

2. Studies directives, modification work orders, and regulations as to their application in the unit. Assists supervisory personnel in determining impact of these requirements on shop capability.

3. Designates and maintains current maintenance repair priorities by Force Activity Designator, pacing items, Equipment Readiness Codes (ERC) A, B, and C equipment type, available funds, commander's priority, state/national priorities, (in the case of floods, fires, and mobilizations) and unit supported.

4. Provides assistance to ensure that Modified Table of Organization and Equipment (MTO&E) or Table of Distribution and Allowances (TDA) reportable Line-Item Numbers (LIN) are properly managed, reported and accounted for with respect to readiness reports, property accountability reports and system management.

5. Analyzes repair methods and recommends control procedures to ensure that accomplishment of programs meet priorities and deadlines established by higher authority or support activities. Coordinates with units and other support activities concerning the delivery, status of repair operations, and/or pick up of completed work orders.

6. In the absence of the higher graded production controller, ensures that unit CL IX accounts are funded, budgeted, and executed to maximize readiness; and performs demand analysis on CL IX expenses to determine proper PLL stockage to sustain facility mission requirements.

***THIS IS A TITLE 32 NATIONAL GUARD POSITION THAT REQUIRES MILITARY MEMBERSHIP***

DUTIES

1. Motor Vehicle Operator: Operates a variety of vehicles and support units with up to 30-ton capacity (truck tractor w/full trailer, 5/6 ton flats and/or box truck w/forklift trailer, etc.) to transport a variety of ammunition, explosives, missiles, missile components and inert items. Will occasionally drive other types and sizes of vehicles when required by workload. Work situations within the confines of the installation, will require driving in congested industrial areas, various weight limits, multiple types of intersections, sharp curves, steep hills and rural type roadways and the demands of driving on public roads.

2. Material Handling: Loads and unloads cargo; segregates items according to condition code, lot number, quantity, compatibility, etc./ stores, stacks and palletizes items. Ensures proper storage practices performed/ assembles items for movement; selects items for issue or movement. Checks the condition of items before movement; re- warehouses high explosives, ammunition components, guided missiles, rockets, etc.

3. Packing: Selects appropriate methods of packing a material to be used in packing on the basis of class of items (classified according to shape, mounting provisions and resistance to shock). Check items received against the accompanying condition of packaging. Notes manner in which items should be wrapped and types of material to be used. Inspects seals and other protective material to insure material provide the protection.