Total 91 Manufacturing / Production job vacancies in Fort Sam Houston, Texas

• Performs lifeguarding duties and limited management functions.
• Directs the operation of the pool and the work of assigned lifeguards. Ensures the safe operation of the pool, it's filtration system, water balance, pool chemistry and performs water test.
• Responsible for lifeguarding guest in attendance at the assigned aquatics facility. Rescues swimmers and administers first aid as required. Ensures that safety rules are followed.
• Responsible for teaching aquatic swimming and water survival training according to TC 21-21. Attend aquatics and/or safety training as directed.
• Keeps accurate records and adequate supplies.

• Operate vehicles on and off public highways and paved roads.
• Operate a variety of diesel powered equipment.
• Operate various types of forklifts up to 50,000 pound capacity.
• Drive oversized engineer equipment which may be oversized or overweight.
• Perform operator maintenance on motorized vehicles.
• Service vehicle braking systems and lights.
• Take and prepare oil samples for the Army Oil Analysis Program.
• Recognize defective or malfunctioning parts of a motor vehicle.
• Ensure that load weights are secured and weights are properly distributed.
• Read and interpret regulations and technical publications.
• Review specifications of vehicles for load capacity.
• Receive incoming warehouse items and equipment.
• Check items for damage or serviceability.
• Prepare various documents and warehousing reports.
• Load and unload equipment on trucks for shipment.

• Respond to inquiries regarding procedures, policies, and written instructions to ensure task can be accomplished.
• Ensure that equipment and tools are available to carry out task assigned.
• Maneuver forklifts in confined spaces to move material or equipment.
• Provide status updates to management of work progress, delays, and completed assignments.
• Conduct quality control review of the work of lower-level mobile equipment operators to ensure completed work is in compliance.

• Provide ground and facility maintenance and device support within ranges and facilities that accommodate military training and personnel.
• Inspect, test, service, adjust, install, replace, clean, and troubleshoot electronic target systems including hard wired and radio frequency communication systems, portable (non-standard) devices and electronic targets.
• Operate computer systems that are configured to operate range targets and support target scenarios and range operations.
• Repair and fabricate electrical wiring harnesses and connect wiring to support thermal target systems.
• Provide operator level maintenance (i.e., keeping connectors clean, etc.) on lead acid and gel cell batteries and solar panels.
• Operate riding tractor with mowing attachments and operate weed eaters.
• Perform building inspections to include checking foundations, walls, flooring, roofs, doors, windows, guttering, and building approaches.
• Apply paint to interiors and exteriors of buildings and equipment after repairs are made.
• Paint wooden target silhouettes, safety panels, range limit markers, fences, and firing point markers.

- Responsible for organizing and coordinating an effective receiving operation. Responsible for organizing and coordinating an effective storage operation.

- Performs tasks involved in issuing and shipping items. Maintains records and documents actions.

- Assists in accomplishing inventories by counting items and properly completing tally listings and other inventory documents.

- Operates forklift trucks, automated material handling and identification equipment to include mobile stock selectors and electromechanical automated equipment such as high-rise automated storage and retrieval vehicles to move, stack and unstack, load and unload, bin, and position material.

- Performs material handling duties, including the use of tools and other equipment, in a safe manner, utilizing safety practices and procedures, and complying with established safety rules and regulations.

• Passes on to other workers instructions received from supervisor, demonstrates proper work methods, and starts work.
• Checks work in progress and when finished for compliance with supervisor’s instructions on work sequence, procedures, methods, and deadlines, and urges or advises other employees to follow supervisor’s instruction and to meet deadlines.
• Works along with other employees and sets pace performing non-supervisory work of the same knowledge and level as that done by the group led.
• Ensures economical use of supplies, safeguarding of tools and equipment, and correct operation/maintenance of same.

• Induct assets, inspect assets and return assets within the business process.
• Ensure weekly schedule is reflective of each shop's capacity, skill and manpower.
• Verify equipment or manpower issues that might impede schedule completion.
• Coordinate with production work centers to ensure the weekly schedules can be achieved.
• Communicate to the Master Scheduler any requirement to increase or decrease the workload.
• Report any discrepancies in program funding, production schedules, or quality to higher management.
• Utilize an automated system to complete logistics program planning such as Logistics Modernization Program and Enterprise Resource Planning System.

• Works as an assistant for the Facilities Operations Team Leader who makes specific assignments, explains policies and procedures and reviews work for quantity and quality of completed projects.
• Job may require work in various facilities depending on requirements as determined by customer demand or programmed activities.
• Cleans recreation equipment, supplies and facility area.; operates equipment and performs self-help maintenance on facilities and equipment.
• Polices interior and exterior areas of building and grounds and performs general housekeeping to make facilities/playing fields/pools/outdoor courts ready for use.
• Monitors inventories and number and condition of items on hand. Coordinates with program staff to ensure adequate equipment is available in sufficient time to conduct program activities.

• Inspect vehicles transporting ammunition to ensure the vehicle is mechanically safe to transport ammunition and that the ammunition loaded on vehicle is compatible, properly loaded and secured, and appropriate placarding is in place.
• Use automated / manual inventory systems to maintain records.
• Periodically inspects ammunition magazines to ensure that ammunition is packaged, marked, and stored IAW applicable regulations
• Conducts visual type of inspections of ammunition ensuring packages and marks ammunition in accordance with regulations.
• Operate electric, gasoline, or diesel-powered forklift trucks in order to lift loads weighing up to 10,000 pounds and as high as 168 inches.
• Ensure ammunition items are appropriately stored in correct areas.

Duties:

Major duties and responsibilities include:

· Receiving work assignments and direction regarding work methods, procedures and schedules from either the Transportation Coordinator and/or the Mobility Manager.

· Arriving at and departing from pickup and discharge points at scheduled times.

· Reading installation maps and judges road/traffic conditions to determine the shortest and safest route.

· Enforcing passenger safety and seatbelt use.

· Using multiple variations of Mobile Data Computer (MDC) in and out of the vehicles for assigned trips and duties daily.

· Loading and unloading patients and medical supplies.

· Performing operator maintenance such as checking fluid levels and air pressure in tires, cleaning and washing of vehicles, and performing inspection checklists to ensure safe and proper operation.

· Maintaining records and document actions, such as operator inspection checklists/forms and accident/incident reports.

· Using two-way radios (or other device) to maintain communications with dispatcher/supervisor on assignments and locations.

· Possessing Commercial Driver's License (CDL) with passenger endorsement is required for the position.

· Performs other related duties as assigned.

DESIGNATED DRUG-TESTING POSITION: Applicants tentatively selected for VA employment in a testing designated position are subject to urinalysis to screen for illegal drug use prior to appointment. Applicants who refuse to be tested will be denied employment with VA. Applicants will not be appointed to the position if a verified positive drug test result is received.

As a LEAD AUDIOVISUAL PRODUCTION SPECIALIST at the GS-1071-12 some of your typical work assignments may include:

• Provides direction and oversight on media production matters.
• Responsible for day-to-day planning and execution of live, field/remote, and studio produced television and audio-visual products, as assigned, created at DMA.
• Directs and manages live and field produced television broadcasting/recording, studio and control room facilities and the associated equipment assets at a level equal to that of major networks in the commercial broadcast television industry.
• Manage operations and allocation and execution of funding IAW DMA and DoD policy.
• Manage large inventory records and utilizes asset management software and systems to maintain property control over inventory IAW industry, DoD policy, and DMA standards.
• Prepares procurement packages for the Production Services Division for television and audio-visual services and equipment.
• Develops, establishes and communicates performance standards; provides team members with the tools, training and authority they need to be successful in their jobs and holds them accountable for their performance.
• Understands, determines and oversees the transmissions and routes of live and pre-recorded products from source to destination.

As a LEAD AUDIOVISUAL PRODUCTION SPECIALIST at the GS-1071-12 some of your typical work assignments may include:

• Provides direction and oversight on media production matters.
• Responsible for day-to-day planning and execution of live, field/remote, and studio produced television and audio-visual products, as assigned, created at DMA.
• Directs and manages live and field produced television broadcasting/recording, studio and control room facilities and the associated equipment assets at a level equal to that of major networks in the commercial broadcast television industry.
• Manage operations and allocation and execution of funding IAW DMA and DoD policy.
• Manage large inventory records and utilizes asset management software and systems to maintain property control over inventory IAW industry, DoD policy, and DMA standards.
• Prepares procurement packages for the Production Services Division for television and audio-visual services and equipment.
• Develops, establishes and communicates performance standards; provides team members with the tools, training and authority they need to be successful in their jobs and holds them accountable for their performance.
• Understands, determines and oversees the transmissions and routes of live and pre-recorded products from source to destination.

Major duties include, but are not limited to:

• Operates and unloads two 400-pound washer/extractors, one 200-pound washer extractor and two 85-pound washer extractor.
• Loads and operates two 200-pound dryers and one 100-pound dryer, utilizing the overhead rail system.
• Cleans all dryer lint screens and canisters routinely, thus reducing energy consumption.
• Receives, weighs and records bulk soiled linen from hospital and three contract suppliers.
• Weighs and sorts soiled linen using the automated sorting system.
• Places soiled linen on the overhead rail system by using the pneumatic controls on the lift station.
• Occasionally performs dyeing and stain removal.
• Does manual and automatic loads of fabric requiring special handling such as fiberglass, mops, dust mops, plastics, uniforms, nomex, and other materials.
• Operates a diesel or gasoline powered vehicle equipped with either an automatic or a ten-speed transmission and a hydraulic lift. Vehicle has a gross weight of 12,880 pounds and is capable of carrying loads weighing up to 7,000 pounds.
• Gathers, assembles, consolidates and lifts bags of soiled linen into carts at all souled linen collection areas within the Medical Center.
• Loads carts of clean linen onto the truck at the clean laundry dock, delivers these carts to all linen distribution points and returns all empty linen carts to the laundry for restocking.
• Adheres to established delivery schedules and time frames when completing deliveries.
• Performs routine cleaning and maintenance on vehicle and equipment and reports other maintenance or repair needs to the Textile Care Manager or Work Leader.
• Required to assume the duties of a laundry worker, so that all hospital needs can be met on a timely basis.
• Performs other duties as assigned.

• Operate a variety of vehicles such as 5, 8 and 20-ton dump truck and a 1-ton truck for transporting personnel, articles, and materials on and off post on public roads and highways.
• Determine the correct operation of the equipment and the required attachments, frequently handling the varied controls at the same time to perform the work.
• Operate equipment in on all types of terrain and confined areas, requiring operational control relevant to the complexity of the equipment.
• Operate a dump truck with front mounted snowplow and rear mounted sand and salt spreader and other special purpose vehicles such as trailer mounted air compressor, vacuum leaf picker, tractor mower and fuel truck.
• Operate a 2.5-cubic yard diesel driven bucket loader to load sand, dirt, or gravel for transporting by dump truck.
• Operate a 12,000 - pound street sweeper, tractor mounted front end street sweeper, and a 5-ton, 1000-gallon street flusher in the maintenance of on-post streets.

• Serve as an Instructor for the 554th Engineer Battalion.
• Teach enlisted, civilian, and foreign student personnel on a variety of Engineer Horizontal Heavy Equipment.
• Monitor and instruct student application during practical exercises on Equipment.
• Develop revision of new and existing Lesson Plans, Programs of Instruction, Skill Level Qualification Tests, and other course materials.
• Responsible for accountability of tools, training aids, and equipment ensuring proper use, care and maintenance.