Total 60 Manufacturing / Production job vacancies in Fort Moore, Georgia

• Performs lifeguarding duties and limited management functions.
• Directs the operation of the pool and the work of assigned lifeguards. Ensures the safe operation of the pool, it's filtration system, water balance, pool chemistry and performs water test.
• Responsible for lifeguarding guest in attendance at the assigned aquatics facility. Rescues swimmers and administers first aid as required. Ensures that safety rules are followed.
• Responsible for teaching aquatic swimming and water survival training according to TC 21-21. Attend aquatics and/or safety training as directed.
• Keeps accurate records and adequate supplies.

• Operate vehicles on and off public highways and paved roads.
• Operate a variety of diesel powered equipment.
• Operate various types of forklifts up to 50,000 pound capacity.
• Drive oversized engineer equipment which may be oversized or overweight.
• Perform operator maintenance on motorized vehicles.
• Service vehicle braking systems and lights.
• Take and prepare oil samples for the Army Oil Analysis Program.
• Recognize defective or malfunctioning parts of a motor vehicle.
• Ensure that load weights are secured and weights are properly distributed.
• Read and interpret regulations and technical publications.
• Review specifications of vehicles for load capacity.
• Receive incoming warehouse items and equipment.
• Check items for damage or serviceability.
• Prepare various documents and warehousing reports.
• Load and unload equipment on trucks for shipment.

• Operates one or more types of heavy equipment to push, pull, pile, or load materials such as sand, gravel, earth, coal, moving and covering refuse, and clearing brush, rocks, tree stumps, and other material.
• Maintains, repairs, and constructs flexible roads, pavements, parking areas, airdromes, bike paths, or similar surfaces of asphalt
• Maintains, repairs, and constructs rigid pavements or similar cement and concrete surfaces.
• Utilizes safety practices and procedures following established safety rules and regulations and maintains a safe and clean work environment.
• Uses and maintains tools and equipment

• Provide ground and facility maintenance and device support within ranges and facilities that accommodate military training and personnel.
• Inspect, test, service, adjust, install, replace, clean, and troubleshoot electronic target systems including hard wired and radio frequency communication systems, portable (non-standard) devices and electronic targets.
• Operate computer systems that are configured to operate range targets and support target scenarios and range operations.
• Repair and fabricate electrical wiring harnesses and connect wiring to support thermal target systems.
• Provide operator level maintenance (i.e., keeping connectors clean, etc.) on lead acid and gel cell batteries and solar panels.
• Operate riding tractor with mowing attachments and operate weed eaters.
• Perform building inspections to include checking foundations, walls, flooring, roofs, doors, windows, guttering, and building approaches.
• Apply paint to interiors and exteriors of buildings and equipment after repairs are made.
• Paint wooden target silhouettes, safety panels, range limit markers, fences, and firing point markers.

• Works as an assistant for the Facilities Operations Team Leader who makes specific assignments, explains policies and procedures and reviews work for quantity and quality of completed projects.
• Job may require work in various facilities depending on requirements as determined by customer demand or programmed activities.
• Cleans recreation equipment, supplies and facility area.; operates equipment and performs self-help maintenance on facilities and equipment.
• Polices interior and exterior areas of building and grounds and performs general housekeeping to make facilities/playing fields/pools/outdoor courts ready for use.
• Monitors inventories and number and condition of items on hand. Coordinates with program staff to ensure adequate equipment is available in sufficient time to conduct program activities.

• Inspect vehicles transporting ammunition to ensure the vehicle is mechanically safe to transport ammunition and that the ammunition loaded on vehicle is compatible, properly loaded and secured, and appropriate placarding is in place.
• Use automated / manual inventory systems to maintain records.
• Periodically inspects ammunition magazines to ensure that ammunition is packaged, marked, and stored IAW applicable regulations
• Conducts visual type of inspections of ammunition ensuring packages and marks ammunition in accordance with regulations.
• Operate electric, gasoline, or diesel-powered forklift trucks in order to lift loads weighing up to 10,000 pounds and as high as 168 inches.
• Ensure ammunition items are appropriately stored in correct areas.

As a LEAD AUDIOVISUAL PRODUCTION SPECIALIST at the GS-1071-12 some of your typical work assignments may include:

• Provides direction and oversight on media production matters.
• Responsible for day-to-day planning and execution of live, field/remote, and studio produced television and audio-visual products, as assigned, created at DMA.
• Directs and manages live and field produced television broadcasting/recording, studio and control room facilities and the associated equipment assets at a level equal to that of major networks in the commercial broadcast television industry.
• Manage operations and allocation and execution of funding IAW DMA and DoD policy.
• Manage large inventory records and utilizes asset management software and systems to maintain property control over inventory IAW industry, DoD policy, and DMA standards.
• Prepares procurement packages for the Production Services Division for television and audio-visual services and equipment.
• Develops, establishes and communicates performance standards; provides team members with the tools, training and authority they need to be successful in their jobs and holds them accountable for their performance.
• Understands, determines and oversees the transmissions and routes of live and pre-recorded products from source to destination.

As a LEAD AUDIOVISUAL PRODUCTION SPECIALIST at the GS-1071-12 some of your typical work assignments may include:

• Provides direction and oversight on media production matters.
• Responsible for day-to-day planning and execution of live, field/remote, and studio produced television and audio-visual products, as assigned, created at DMA.
• Directs and manages live and field produced television broadcasting/recording, studio and control room facilities and the associated equipment assets at a level equal to that of major networks in the commercial broadcast television industry.
• Manage operations and allocation and execution of funding IAW DMA and DoD policy.
• Manage large inventory records and utilizes asset management software and systems to maintain property control over inventory IAW industry, DoD policy, and DMA standards.
• Prepares procurement packages for the Production Services Division for television and audio-visual services and equipment.
• Develops, establishes and communicates performance standards; provides team members with the tools, training and authority they need to be successful in their jobs and holds them accountable for their performance.
• Understands, determines and oversees the transmissions and routes of live and pre-recorded products from source to destination.

Major duties include, but are not limited to:

• Operates and unloads two 400-pound washer/extractors, one 200-pound washer extractor and two 85-pound washer extractor.
• Loads and operates two 200-pound dryers and one 100-pound dryer, utilizing the overhead rail system.
• Cleans all dryer lint screens and canisters routinely, thus reducing energy consumption.
• Receives, weighs and records bulk soiled linen from hospital and three contract suppliers.
• Weighs and sorts soiled linen using the automated sorting system.
• Places soiled linen on the overhead rail system by using the pneumatic controls on the lift station.
• Occasionally performs dyeing and stain removal.
• Does manual and automatic loads of fabric requiring special handling such as fiberglass, mops, dust mops, plastics, uniforms, nomex, and other materials.
• Operates a diesel or gasoline powered vehicle equipped with either an automatic or a ten-speed transmission and a hydraulic lift. Vehicle has a gross weight of 12,880 pounds and is capable of carrying loads weighing up to 7,000 pounds.
• Gathers, assembles, consolidates and lifts bags of soiled linen into carts at all souled linen collection areas within the Medical Center.
• Loads carts of clean linen onto the truck at the clean laundry dock, delivers these carts to all linen distribution points and returns all empty linen carts to the laundry for restocking.
• Adheres to established delivery schedules and time frames when completing deliveries.
• Performs routine cleaning and maintenance on vehicle and equipment and reports other maintenance or repair needs to the Textile Care Manager or Work Leader.
• Required to assume the duties of a laundry worker, so that all hospital needs can be met on a timely basis.
• Performs other duties as assigned.

• Operate a variety of vehicles such as 5, 8 and 20-ton dump truck and a 1-ton truck for transporting personnel, articles, and materials on and off post on public roads and highways.
• Determine the correct operation of the equipment and the required attachments, frequently handling the varied controls at the same time to perform the work.
• Operate equipment in on all types of terrain and confined areas, requiring operational control relevant to the complexity of the equipment.
• Operate a dump truck with front mounted snowplow and rear mounted sand and salt spreader and other special purpose vehicles such as trailer mounted air compressor, vacuum leaf picker, tractor mower and fuel truck.
• Operate a 2.5-cubic yard diesel driven bucket loader to load sand, dirt, or gravel for transporting by dump truck.
• Operate a 12,000 - pound street sweeper, tractor mounted front end street sweeper, and a 5-ton, 1000-gallon street flusher in the maintenance of on-post streets.

• Serve as an Instructor for the 554th Engineer Battalion.
• Teach enlisted, civilian, and foreign student personnel on a variety of Engineer Horizontal Heavy Equipment.
• Monitor and instruct student application during practical exercises on Equipment.
• Develop revision of new and existing Lesson Plans, Programs of Instruction, Skill Level Qualification Tests, and other course materials.
• Responsible for accountability of tools, training aids, and equipment ensuring proper use, care and maintenance.

• Exercise caution when backing to load or unload at the docks, ramps or similar locations.
• Read maps and judge road/traffic conditions to determine the shortest and safest routes.
• Use judgment when deciding the manner and sequence of loading cargo to achieve load balance.
• Operate a truck with a gross vehicle weight rating of 11,000 pounds.
• Select routes, obey all traffic laws and safety regulations when operating a motor vehicle.
• Perform inspection checklists to ensure safe and proper operation.

Major duties include, but are not limited to:

• Incumbent is responsible to the Supervisor Laundry Operations Specialist for assuring that the work assignments of the other employees of the section are carried out.
• Distributes and balances the workload among employees in accordance with established work flow or job specialization. Assures timely accomplishment of the assigned workload.
• Monitors progress of work and makes day to day adjustments in accordance with established priorities. Obtains assistance from the Supervisor Laundry Operations Specialist as needed.
• Incumbent maintains records of work accomplishments and prepares production reports as required.
• Instructs employees in specific tasks and job techniques.
• Gives on the job training to new employees in accordance with established procedures and practices in conjunction with training program provided by the Supervisor Laundry Operations Specialist, with strong emphasis on safe work habits.
• May operate all power equipment, washer/extractors, dryers, or any laundry related equipment in the absence of the regular machine operator to cover any vacant positions due to vacations, sick leave, etc.
• Leads other employees in daily assignments and monitors the quality of work being performed.
• Incumbent approves leave in the absence of the Supervisor Laundry Operations Specialist.
• Informs employees of available services and employee activities.
• Resolves informal concerns 'of employees and refers others to the Supervisor Laundry Operations Specialist. Reports to the Supervisor Laundry Operations Specialist on performance, progress, and training needs of employees and on disciplinary issues.
• Makes suggestions to Supervisor Laundry Operations Specialist as requested concerning promotions, reassignment, recognition of outstanding performance, and personnel needs.
• Makes suggestions to Supervisor Laundry Operations Specialist as requested concerning promotions, reassignment, recognition of outstanding performance, and personnel needs.
• Incumbent assumes total responsibility in operation of laundry during absence of the Supervisor Laundry Operations Specialist due to vacation, sick leave, training and trips off station.
• Performs other duties as assigned.

• You will drive vehicles on specific trips or regularly established schedules/routes to transport material, equipment, and personnel within TRlREFFAC, to activities, and outside points over primary and secondary highways and poorly maintained roads.
• You will operate the above vehicles to transport the following TRIREFFAC and visiting personnel, tractors, small cranes, and other heavy equipment, industrial materials, hazardous materials, and other supplies/items as assigned.
• You will operate other lighter or heavier capacity vehicles and equipment than designated above as an incidental or occasional duty.
• You will perform auxiliary task aimed at ensuring efficiency of motor vehicle operations.
• You will hook and unhook trailer from tractors fifth wheel or pintle hook.
• You will lay out and segregate loads, and secure and fasten them properly using nylon straps, ropes, nets, chains, and binders in a safe manner.
• You will load and unload material and equipment, and occasionally directs laborers ln unloading materials.
• You will check material loaded and unloaded or delivered against records of various types to ensure against errors, and obtains signatures of receiving individuals when and where required.
• You will maintain trip record or log showing time of departure, sequence of stops, time of return, trip mileage, fuel and oil consumption, accidents, damages, or traffic violations.
• You will perform routine checks of motor vehicle to ensure safe operating conditions.
• You will make operational inspections of vehicles for loose or damaged parts, low tires, etc.
• You will check fuel supply, fluid levels, battery condition, and other general conditions such as windows, lenses, lights, horn, brakes. etc.
• You will report defects in vehicle operation or need of maintenance as noted during use to the Transportation Branch (Code 533) Supervisor.
• You will be required to maintain assigned work areas in a neat, clean, safe, and order[y manner.
• You will perform related duties including quality control coordination task required to ensure the quality of products/se1Vices resulting from work performed.

• Receives, examines, verifies, and identifies complex categories of materials and equipment, such as those which are toxic, radioactive, perishable, classified, high-valued equipment, precious/strategic metals, and complex electronic or mechanical equipment, assemblies, and components
• Maintains an aggressive surveillance inspection program on stored/on-hand items. Verifies items/equipment are properly identified and marked/tagged
• Receives, examines, and determines condition of a wide variety of complex items and materials to be turned in/removed. Performs most complex disposal tasks, such as those required in dealing with reuse, salvage, and sales preparation of a wide variety of complex items and materials
• Monitors special programs, computerized listings, and documentation/records. Monitors the Repair Cycle, Time Change, and Time Compliance Technical Order (TCTO) programs. Uses and maintains tools
• Operates electric, LPG, or diesel powered fork lift trucks capable of lifting loads weighing less than 10,000 pounds as high as 168 inches. Utilizes safety and security practices and procedures following established rules and regulations and maintains a safe and clean work area