Total 355 Manufacturing / Production job vacancies in Fort Drum, New York

• Receives, examines and determines the condition and disposition of a wide variety of materials.
• Reviews disposal turn-in document accompanying material. Compares data against property assuring correct information and proper documentation (e.g. stock number, nomenclature, quantity, unit of issue, disposal authority code, DEMIL, condition code).
• Visually inspects usable property for obvious signs of condition and determines acceptability.
• Determines condition and reportability and special handling requirements (e.g., hazardous material, precious metals, security, DEMIL, Special focus items, etc.) and assigns appropriate classification instructions for warehousing.
• Verifies accuracy of demilitarization codes, takes action to challenge questionable items/codes, and maintains segregated storage of property requiring DEMIL.
• Ensures proper certification is attached to turn-in document when demilitarized by host or generating activity.
• Performs special and periodic inventory of property; re-palletizes/re-locates property as necessary.
• Operates forklifts and related materials handling equipment to move, load and unload, stack or un-stack palletized materials, supplies, and equipment.

About Us

Established since 1929, ALVANCE British Aluminium, part of the GFG Alliance, owns and operates the last remaining aluminium production plant (smelter) in the UK and a connected hydropower electricity generation station located on the slopes of Ben Nevis, Britain’s highest mountain. A combination or renewable energy sources makes this site one of the greenest metal production plants in the country

Roles and Responsibilities

• Record And Report/update all Dam Levels, Water Readings to Hydro Mechanical Engineer – Daily.
• Carry out regular safety inspection on intakes security fencing signage etc across the schemes and action critical repairs on a timely manner.
• Hydro Scheme Maintenance including but not limited to

• Clean Intakes regularly.
• Clean Screens across the Lochaber and Spey schemes.
• Support regulatory checks & inspections
• General Hydro Scheme Maintenance
• Road Maintenance.
• Grass and Scrub management around Dams and Intakes.
• Tree Cutting
• Fencing
• Winter Maintenance – Plough and Grit Access Roads paths etc.

• Supervision and assist contractors working on the hydro schemes
• Condition inspections of the assets
• Valve operation – pipeline filling, emptying, maintenance, scouring
• Photography and IT skills (basic)
• Isolation of Hydro Scheme & power station infrastructure (to level of IO training)
• Support the Lochaber Hydro Operators where required.
• Support estates maintenance where agreed with the Mechanical Engineer.
• Other duties as instructed to support the hydro scheme, Smelter & estates.

Working with Us

We work collaboratively with high energy and ambition to develop sustainable growth plans for our business, our future and our careers.
We are committed to uncompromising levels of safety, strong customer-centricity and diversity. Our people are our greatest asset.

If your true passion in life is to help create a better world through the work that you do, we would encourage you to think about Alvance British Aluminium, part of GFG Alliance You will have the opportunity to thrive, make a difference and leave a legacy to both industry and society.

Hours of work

DAY SHIFT

39H PER WEEK.

OVERTIME PAID

Fabrica AI is reinventing how robots are developed. Currently novel robots take 5-20 years. We are building a design automation platform to bring it down to a month, and have already demonstrated significant progress by developing tile grouting robots in record time. Robotics simulation and reinforcement learning has been advancing a lot making it 1000x cheaper to train robots compared to 5 years ago, and as Jensen Huang said at Nvidia GTC 2024, "the ChatGPT moment for robotics may be just around the corner." A couple other companies are building on the same paradigm shift but we are the only ones using it to automate hardware design, not just software.

Building robots and a design automation platform together brings great synergy - the platform helps us develop robots faster than anyone else and the robots allow us to gather data and do experiments at scale. Data gathering can be done through partnerships with other robotics companies, but doing experiments is crucial for grounding the platform in reality and ensuring its usefulness. The grouting robots are already deploying daily at construction sites and bringing value to clients. We are currently negotiating sales worth around 500k USD. With manufacturing cost multiple times lower than companies using a traditional robotic arm, our robots have an ROI in weeks. Our robot is also small and simple to use, operating from a single button without the need to upload floorplans or do any complex setup. Soon we would be expanding into other simple and valuable robots for the construction industry.

We’ve raised over 2.5m USD from Hoxton Ventures, Credo Ventures, our Professor from Cambridge University, Woh Hup, and the owner of BHCC (listed construction company). We’ve 2500sqft of space in Singapore where we have over 20 team members, and 1200sqft of space in Czechia where we have our software team.

Jakub Suchanek (CEO) has an engineering degree from the University of Cambridge and experience working on self-driving cars at Wayve and machine learning at Granta Innovation and Wacker. He is a worldwide winner of NASA SpaceApps and has won bronze medals in International Olympiads in Informatics and Physics.

Ronald Luc (CTO) earned a degree in Math and Computer Science from Masaryk University, where he was a teaching assistant, and supervised several deep learning theses. He has years of industry experience in both machine learning and self driving cars. With Jakub he won TechFest Munich, one of the EU’s top hackathons; and represented Czechia at the International Olympiad in Informatics.

Keefe Wayne Teo (COO & CFO), a University of Cambridge engineering graduate, served as president of Hackbridge.io, promoting entrepreneurship in tech. He has 100+ citations in research journals and four papers on sustainable energy. He previously worked at Entrepreneur First and has business development experience from other companies.

Website: https://www.fabrica.ai/ (and various press releases, awards, etc.)
Latest Grouting Robot Demo: https://www.youtube.com/watch?v=AVWjmaMuYM0

Fabricator videos

https://www.youtube.com/watch?v=4aoQ4QaEOPQ

https://www.youtube.com/watch?v=xnENP7zWzEM

https://youtu.be/qXpkFeEidac

https://www.youtube.com/watch?v=5SBiEBLMQ9k

Your internship would revolve around bringing our robot to market. You may be remunerated with a combination of salary and share options. This internship requires a candidate to have both an engineering background and a reasonable business acumen. Great communications skills are required as we work with many external contract manufacturers.

1. Pushing our product to pilot production (design for manufacturing, design for reliability, design for user-friendliness)
2. Connecting manufacturers and our R&D team to build and iterate on our prototype, creating new avenues for manufacturing at scale, manufacturing for reliability
3. Sourcing for and testing appropriate equipment and materials for R&D
4. Visiting industry trial sites, giving appropriate feedback to product development team
5. Speaking to industry players, ground workers, understanding the process of tile grouting to help us shape our solution, especially from an operational point of view
6. Hiring, recruitment, and outreach
7. Any other operational duties

A great candidate would possess the following:

• Value the direct impact on the product and proximity to clients at a startup and the growth potential of a startup
• Willing to work without a very well defined job scope and willing to adapt to changes week on week
• Ability to think of metrics to measure progress and deciding based on back of the envelope calculations
• Keenness to do more than is expected, impact driven
• Growth mindset driven

Our development process is very iterative and agile. Thus, there would not be a concrete plan more than 2 weeks ahead and your role/tasks is/are likely to evolve over time. Besides, a lot of testing has to be done on a construction site. If you like this process, you’d be a good fit for us. You would thus play a significant part in deciding how your work would contribute to our overall goals. Please email your resume to careers@fabrica.ai if you are interested. Thank you

Responsibilities

· Responsible for creation/ modification/ improvement of work instructions based on feedback from stakeholder(s).

· Responsible for building on medical robot/ controller unit/ cart.

· Ensure production quality and consistency.

· Provide feedback to development team on product improvement base on production flow.

· Maintain production documents.

· Analyze production process and propose production improvement plan.

· Troubleshoot production discrepancy/ variance.

· Conduct in-process verification on modular and system level.

· Program controller units

Competency Requirements

· Responsible for creation/ modification/ improvement of work instructions based on feedback from stakeholder(s).

· Responsible for building on medical robot/ controller unit/ cart.

· Ensure production quality and consistency.

· Provide feedback to development team on product improvement base on production flow.

· Maintain production documents.

· Analyze production process and propose production improvement plan.

· Troubleshoot production discrepancy/ variance.

· Conduct in-process verification on modular and system level.

· Program controller units

• Receives, verifies, sorts and classifies, warehouses, and issues a variety of excess surplus property.
• Conducts extensive review, research, verification and receipt of a variety of routine and complex property.
• Employs Federal Cataloging Procedures to properly validate or change data elements.
• Certifies that items are eligible for sale.
• Reviews disposal turn-in document (DTID) accompanying material.
• Compares data against property to assure correct information including proper documentation (e.g., stock number, nomenclature, quantity, unit of issue, disposal authority code, DEMIL and condition code).
• Visually inspects usable property for obvious signs of condition and determines acceptability.
• Determines condition and reportability and special handling requirements (e.g., hazardous material, precious metals, security, DEMIL, Special focus items, etc.) and assigns appropriate classification instructions for warehousing.
• Verifies accuracy of demilitarization codes, takes action to challenge questionable items/codes, and maintains segregated storage of property requiring DEMIL.
• Ensures proper certification is attached to turn-in document when demilitarized by host or generating activity.
• Performs daily inspection and maintenance and completes appropriate forms.
• Responsible for the pre-receipt/inspection/receipt/storage/safeguarding/handling of hazardous property.
• Performs pre-receipt examination of property on site at the generation point.
• Operates forklifts and related materials handling equipment to move, load and unload, stack or un-stack palletized materials, supplies, and equipment.

Overall Job Purpose

Lead or assist a team in the development and building of CMMS databases for new or existing projects, provide support to the team(s) to ensure contractual/specification functionality and business objectives are achieved.

Take part in other activities assigned or designated by the manager relating to the current role.

Core Responsibilities

• Execution of the delivery for the CMMS Database build as per planned schedule and milestones.
• Lead and oversee work execution of a CMMS database build or data mining/gathering activity for use with a CMMS.
  Vetting on the quality of final data to be included in the CMMS build as per project specification.
• Coordination of data information requirement with EPCI group, project managers and client. Serves as the main point of contact on CMMS database project and/or remediation work.
• Identifying maintainable equipment/items to be marked for the CMMS from various sources.
• Meet with project groups in relation to data acquisition and delivery to the build team.
• Provide monthly reports on the status of assigned CMMS database build project.
• Guides and ensures database build team members follow project specification standards.
• Ensure CMMS database handover acceptance as per agreed specifications and functionality with client.
• Implementation of CMMS database remediation projects as per agreed work scope.
• Support and assist in implementation of change requests in the CMMS for the company’s internal operating assets when requested.
• To manage and update project schedules and progress diligently.
• To give feedback and suggest improvements to current CMMS database build or data mining/gathering processes.
• Ensure constant communication flow to the Information Management team and individuals involved in the project.

Educational Qualification:

• Preferable with a 4-year Bachelor Diploma in Marine or Mechanical or Electrical engineering.

Relevant Work Experience (Mandatory):

• At least 1.5 years working on CMMS plant maintenance database or from a marine vessel or onshore plant maintenance related background.
• Exposure to onshore production plant or Marine or Oil and Gas industry.
• User and operating knowledge to at least one Computerized Maintenance Management System (CMMS). E.g., SAP-PM, Maximo, NSE, AMOS, TM Master, Star Systems, etc.
• Practical exposure to data acquisition and manipulation to facilitate a secure, complete, and accurate data gathering and processing.
• Identifying tags, boundary mark ups, location and its boundaries from P&ID’s and other source materials. ***
• Able to identify maintainable equipment from tags and P&ID’s. ***

*** Mandatory requirement

Desirable Traits:

• Experience in being a member of or acted as a lead in a CMMS database building project.
• Working knowledge in reliability and maintenance analysis methodologies.
• General working knowledge on planned maintenance and project engineering specific to the oil and gas and/or marine industry.
• Familiarity with sea going vessel or onshore plant equipment and maintenance.
• Familiarity with industry standards such as ISO 9001 / 14001 / 14224.
• Strong analytical and evaluation capability.
• Excellent people management skills. Able to lead and motivate team members.
• Self-motivated with a strong drive to innovate and propose processes that will enhance work output.
• Excellent report writing and presentation skills.

Certifications:

• CMMS user training certification.

Computer Software:

• Advance Microsoft Excel operation and manipulation.
• Microsoft Office Suite operations.
• Knowledge in effective use of Microsoft Project for scheduling and planning.
• Good to have but not mandatory: Knowledge in Structured Query Language (SQL) / Python scripting / Visual Basic for Applications (VBA).

Ref ID: JT

Job Description

Assembly of components with mechanical fasteners, apply epoxy etc.

Job Requirements

With work experience in assembly of mechanical parts/components, with a delicate and steady pair of hands, and most importantly good eyesight.

Education level: ‘N’-Level, NITEC Certificate with technical background.

Open to Singaporeans only.

The working hours are as follows:

Mondays to Thursdays: 8.30am to 6.00pm

Fridays: 8.30am to 5.30pm

Meal Breaks: 1 hour

The basic monthly salary will commensurate with the shortlisted candidate’s work experience, negotiable.

Duties include but are not limited to:

• Major duties and responsibilities include but are not limited to:
• Responsible for the overall machine production in the Textile Care Processing facility (TCPF), ensuring quality and quantity of work performed meets established standards.
• Shifts available staff through work stations to meet the varying daily workload demands in production.
• Work assignments consist of soiled sorting, washing, drying, conditioning, rough dry folding, flatwork processing, uniform processing, patient personal processing, linen distribution, and the operation of all laundry machinery and equipment associated with the assigned tasks.
• Leads three (23) Operators, one(1)Sewing Machine Operator, and at least thirteen(913) Laundry Workers.
• Makes routine decisions, demonstrates proper techniques and safe practices to TCPF staff, and answers staffs' questions regarding policies, procedures and machinery/equipment operation.
• Monitors work while in progress to ensure production needs are met and proper procedures, rules and regulations are being followed.
• Confers with the TCPF Supervisor/Manager daily.to determine priorities and reports any TCPF discrepancies, malfunctions, shutdowns and concerns to the TCPF Supervisor/Manager. Incumbent assumes control of the TCPF in the absence of the Supervisor/Manager.
• Performs other duties as assigned.

• Messages consist of instructions on movement of the train as to present and future assignments and must be accurately received and transmitted.
• Shifts, spots, and switches rail cars carrying ordinance material and other supplies throughout the installation.
• Serves as a crew member in charge with responsibility for the safe operation of the engine, train, and crew within the installation.
• Serves as a conductor in the absence of the primary conductor.
• Performs operator maintenance on the locomotive by assuring proper level of oil in crankcase, checking level of water or antifreeze in cooling system and batteries.
• Prior to use, inspects locomotives and completes DD Form 862, Daily Inspection Worksheet for Diesel Electric Locomotives and Locomotive Cranes

• Represent management as the direct interface between Wheeler-Sack Army Airfield, the Army Field Support Battalion, and the Defense Logistics Agency representatives for all matters concerning petroleum supply and distribution requirements.
• Operate and maintain a complete mechanical fuels distribution system to include the airfield's Oasis aircraft hot refueling point.
• Verify the daily physical inventory from eight refuel tankers and five above ground storage tanks by means of tapes, bob, and petroleum detecting paste to determine the quantity of fuel on hand.
• Responsible for requesting the ordering of bulk F-24, when needed, to maintain mission readiness for Department of Defense aircraft.
• Direct the receipt and transfer of F-24 from commercial tank trucks to storage tank.
• Serves as an Airfield Hazardous Materials Representative for Waste and Contaminated Petroleum, Oils, and Lubricant with Fort Drum on hazardous materials issues.
• Operates aircraft de-icing equipment consisting of a 66,000 pounds gross vehicle weight (GVW) hi-reach with a 78-foot-high boom and a mobile high lift vehicle with a 120-foot-high boom with open bucket for large, fixed wing aircraft.

• Receives and processes incoming shipments.
• Operates electric forklifts capable of lifting up to 6,000 pounds as high as 14 feet.
• Unloads, inspects, and tallies stock to ensure quantities and types of items align with shipping documents.
• Performs driver maintenance tasks in accordance with established rules and regulations.
• Performs formal inventories semi-annually.