Total 1,274 Information Technology job vacancies in Gatwick, West Sussex, RH10 9AS

Responsible for the maintenance and repair of the institution buildings and structures, through the supervision of inmate workers.

Supervises and trains inmate workers in various phases associated with the construction, repair, maintenance, and renovation of buildings and related structures, grounds, fixtures and utilities, requiring the use of a variety of trade practices such as carpentry, masonry, plumbing, cement work, painting, welding, roofing, and other related trades.

Responsible for design and development of plans, specifications and blueprint drawings.

Responsible for adhering to safety procedures for hazardous material handling, OSHA requirements, and environmental issues.

Responsible for the ordering and purchasing of all material/equipment needed to perform assigned projects.

Along with all other correctional institution employees, incumbent is charged with responsibility for maintaining security of the institution. The staff correctional responsibilities precede all others required by this position and are performed on a regular and recurring basis.

Major Duties: This is not an all-inclusive list

As a UNMANNED AIRCRAFT SYSTEM QA SPEC (TEMP-INDEF) (TITLE 32), GS-1910-11, you will:

• Responsible for the integration process to determine a new maintainer's proficiency and corresponding maintainer designation.
• Oversees the initial integration counseling event that includes but is not limited to the Aircrew Maintenance Training Program (AMTP), hangar orientation, local area orientation, basic expectations, and TUASOF responsibilities.
• Executes and manages the Commanders Aviation Maintenance Training Program and the Commanders Aviation and Standardization Program for UAS Crewmembers.
• Trains and evaluates all UAS Air Crew Member (ACM) for the Crew Chief Training Program (CCTP).Responsible for progression, currency and sustainment of ACM's.
• Develops Critical Task List (CTL) for Army Military Occupational Specialty (MOS) in supported units.
• Ensures all tasks on the CTL's are up to date and in line with current equipment and Unit Mission Essential Task List (METL).
• Serves as the primary AMTP trainer and evaluator for the TUASOF.
• Acts as the advisor to unit Commanders on the management of the AMTP and maintenance level of unit members.
• Trains and evaluates crewmembers in the following areas Aircraft Notebook User Training, TAMMS-A,CPC Training, Compressed Gas Cylinder Training, Electrical Hazards, Environmental/Spill Response, AGSE.
• Trains and Evaluates basic aviation maintenance fundamentals, basic electronics training, and electronic and mechanical maintenance of UAS.
• Responsible for the development of instructional materials.
• Directs on-the-job training and arranges for formal training of new employees or crewmembers.
• Responsible for the safe execution of all MOS specific flight line operations necessary to meet mission requirements for the applicable UAS assigned to the TUASOF.
• Responsible for all flight line operational support to include Site support coordination, generator and vehicle fueling operations, site maintenance, work orders, runway lighting supplies, maintaining the crash kit, FOD prevention, runway maintenance and other support tasks as directed.
• Ensures daily FOD (Foreign Object Debris) walk is conducted to clear large rocks, tools, and other debris that would create a hazard to operations.
• Ensures the unmanned aircraft is flight worthy and is current on maintenance servicing and inspections.
• Operates light utility motor vehicles, up to two and a half ton, to transport self and others to worksites that are remote from the immediate shop facility, between installation airfields, or emergency repair sites when required.
• Assists the Safety Officer with offsite emergency/recovery operations.
• Responsible for the preparation and management of forms and records required to manage maintenance, control the use, and report warranty actions and deficiencies on UAS and associated ground support equipment.
• Ensures DA Form 3513 is prepared and maintained for each maintainer who is conducting maintenance, service, modifications, or inspections to any aircraft or component.
• Serves as the Primary Point of Contact for the notification, reporting, and implementation of all Aviation and Ground Safety messages as they pertain to the assigned TUASOF equipment.
• Responsible for providing accurate maintenance requirement forecasts of upcoming inspections,
• Responsible for verifying that correct methods, techniques, and procedures are used and that work is in accordance with Government publications and specifications.
• Ensures that Government property is controlled and properly maintained.
• Reviews work order requests and inspects for correctness and proper format to ensure completeness and audit capability.
• Knowledge of and access to US Army aircraft status reporting procedures and methods.
• Knowledge of the Global Combat Support System -Army (GCSS-A), Unit Level Logistics System - Aviation(ULLS-A) and Aircraft Notebook (ACN) programs sufficient to determine if user needs can be met by the system programs and to identify deficiencies and problems.
• Provides technical assistance on all UAS maintenance matters to UAS operators, UAS maintenance crews or contractor support personnel.
• Performs Quality Assurance (QA) inspections and evaluations of unit or facility performed unmanned aircraft system maintenance and repair, in support of organizational, intermediate, and/or depot maintenance on the UAS equipment set assigned to the unit or facility.
• Inspects aircraft fuselage and airframes, landing gears, tires, power trains, drive trains, fuel, electrical, hydraulic, flight controls, rotor, transmission, instruments, armaments, and/or all systems required to make the aircraft a total mission capable system to include the launchers, Tactical Automatic Landing System, Ground Control Stations, tactical vehicles, generators, environmental control units and all other ground support equipment related to the UAS system.
• Performs other duties as assigned.

Major Duties: This is not an all-inclusive list

As a UNMANNED AIRCRAFT SYSTEM QA SPEC (TEMP-INDEF) (TITLE 32), GS-1910-11, you will:

• Responsible for the integration process to determine a new maintainer's proficiency and corresponding maintainer designation.
• Oversees the initial integration counseling event that includes but is not limited to the Aircrew Maintenance Training Program (AMTP), hangar orientation, local area orientation, basic expectations, and TUASOF responsibilities.
• Executes and manages the Commanders Aviation Maintenance Training Program and the Commanders Aviation and Standardization Program for UAS Crewmembers.
• Trains and evaluates all UAS Air Crew Member (ACM) for the Crew Chief Training Program (CCTP).Responsible for progression, currency and sustainment of ACM's.
• Develops Critical Task List (CTL) for Army Military Occupational Specialty (MOS) in supported units.
• Ensures all tasks on the CTL's are up to date and in line with current equipment and Unit Mission Essential Task List (METL).
• Serves as the primary AMTP trainer and evaluator for the TUASOF.
• Acts as the advisor to unit Commanders on the management of the AMTP and maintenance level of unit members.
• Trains and evaluates crewmembers in the following areas Aircraft Notebook User Training, TAMMS-A,CPC Training, Compressed Gas Cylinder Training, Electrical Hazards, Environmental/Spill Response, AGSE.
• Trains and Evaluates basic aviation maintenance fundamentals, basic electronics training, and electronic and mechanical maintenance of UAS.
• Responsible for the development of instructional materials.
• Directs on-the-job training and arranges for formal training of new employees or crewmembers.
• Responsible for the safe execution of all MOS specific flight line operations necessary to meet mission requirements for the applicable UAS assigned to the TUASOF.
• Responsible for all flight line operational support to include Site support coordination, generator and vehicle fueling operations, site maintenance, work orders, runway lighting supplies, maintaining the crash kit, FOD prevention, runway maintenance and other support tasks as directed.
• Ensures daily FOD (Foreign Object Debris) walk is conducted to clear large rocks, tools, and other debris that would create a hazard to operations.
• Ensures the unmanned aircraft is flight worthy and is current on maintenance servicing and inspections.
• Operates light utility motor vehicles, up to two and a half ton, to transport self and others to worksites that are remote from the immediate shop facility, between installation airfields, or emergency repair sites when required.
• Assists the Safety Officer with offsite emergency/recovery operations.
• Responsible for the preparation and management of forms and records required to manage maintenance, control the use, and report warranty actions and deficiencies on UAS and associated ground support equipment.
• Ensures DA Form 3513 is prepared and maintained for each maintainer who is conducting maintenance, service, modifications, or inspections to any aircraft or component.
• Serves as the Primary Point of Contact for the notification, reporting, and implementation of all Aviation and Ground Safety messages as they pertain to the assigned TUASOF equipment.
• Responsible for providing accurate maintenance requirement forecasts of upcoming inspections,
• Responsible for verifying that correct methods, techniques, and procedures are used and that work is in accordance with Government publications and specifications.
• Ensures that Government property is controlled and properly maintained.
• Reviews work order requests and inspects for correctness and proper format to ensure completeness and audit capability.
• Knowledge of and access to US Army aircraft status reporting procedures and methods.
• Knowledge of the Global Combat Support System -Army (GCSS-A), Unit Level Logistics System - Aviation(ULLS-A) and Aircraft Notebook (ACN) programs sufficient to determine if user needs can be met by the system programs and to identify deficiencies and problems.
• Provides technical assistance on all UAS maintenance matters to UAS operators, UAS maintenance crews or contractor support personnel.
• Performs Quality Assurance (QA) inspections and evaluations of unit or facility performed unmanned aircraft system maintenance and repair, in support of organizational, intermediate, and/or depot maintenance on the UAS equipment set assigned to the unit or facility.
• Inspects aircraft fuselage and airframes, landing gears, tires, power trains, drive trains, fuel, electrical, hydraulic, flight controls, rotor, transmission, instruments, armaments, and/or all systems required to make the aircraft a total mission capable system to include the launchers, Tactical Automatic Landing System, Ground Control Stations, tactical vehicles, generators, environmental control units and all other ground support equipment related to the UAS system.
• Performs other duties as assigned.

Serves as the department head in the Correctional Services department at a Bureau of Prisons correctional institute. Serves as the resident expert on all custodial and security questions arising at the institution and has full and final technical responsibility when problems occur during the course of any given shift.

Responsible for institutional security, inmate conduct and discipline, inmate work, control of hazardous tools and material, safety, sanitation, control and use of institution vehicles, and key control. Inspects facilities, observes personnel and inmates from the standpoint of security, morale and employee-inmate relations, and overall program coordination.

Serves as an advisor to the Warden and his staff in the formulation and implementation of institution policies, procedures and programs. Integrates policies and procedures into the overall operations of the facility, as well as the correctional department and keep management advised of activities effecting institution programs.

Along with all other correctional institution employees, incumbent is charged with responsibility for maintaining security of the institution. The staff correctional responsibilities precede all others required by this position and are performed on a regular and recurring basis.

Receives visitors, determines the nature of the requests, personally providing the information desired when it is of a routine or procedural matter, before referring them to the Associate Warden.

Maintains supervisor’s calendar, takes request for appointments with supervisor and staff.

Serves as a liaison to the Associate Warden, personally processing requests.

Responsible for the preparation in draft and/or final form of material such as memoranda, letters, reports, requests, etc., as assigned.

Along with all other correctional institution employees, incumbent is charged with responsibility for maintaining security of the institution.

The staff correctional responsibilities precede all others required by this position and are performed on a regular and recurring basis.

Mobile Vehicle Technician / Roadside Technician vacancy

Location: Gatwick Area

Salary: £36,180, Rising to £38,88 following probation (inclusive of London Weighting) OTE £46,000+
Hours: Monday to Friday, 1 in 3 Saturday's. 35 hour contract.
Ref: OC19144

We have exciting new opportunities for Mobile Vehicle Technicians / Roadside Technician. We are recruiting across Gatwick so we will tailor the area to you based on your location.

This Mobile Vehicle Technician / Roadside Technician is working for one of the UK's leading vehicle breakdown companies who provider a first-class service to thousands of customers. Looking for people to start ASAP!! Exceptional company to work for with a wide range of benefits including starting your day as soon as you start the van.

Fantastic benefits package that includes:

• 23 days annual leave rising to 25 days with service
• No additional travel time - start and finish on your driveway
• Know your shifts 12 months in advance
• A fully equipped state of the art company vehicle with tools and uniform
• Free RAC breakdown cover for you and your household from day one
• Access to a broad range of career progression opportunities and industry leading training
• 24-hour colleague assistance programme
• Company life assurance linked to pension
• Access to MyFlex our flexible benefits site providing numerous benefits including health and wellbeing

Mobile Vehicle Technician / Roadside Technician role :

• Working closely with the breakdown team you will be tasked with attending breakdowns to diagnose issues they have. Working on the vehicles to ideally get them back on the road otherwise making sure the vehicle goes back to the workshop.
• Identifying problems and advising the customer on the vehicle's issues.
• Vehicle servicing & general maintenance including electrical & vehicle Diagnostics.
• Mobile Vehicle Technician / Roadside Technician are the face of the business so its important you deliver exceptional Customer Service.

Mobile Vehicle Technician / Roadside Technician Requirements:

• A Level 2 light vehicle maintenance qualification (or equivalent)
• Demonstrative technical, electrical, and diagnostic experience
• A customer focused approach
• A full UK driving licence

Consultant - Ryan Scholes

Octane Recruitment

VTSTH

Octane Recruitment are a leading Recruitment agency specialising in Automotive, Motor trade, Engineering, OEM and various related industries.

We are recruiting across the UK for Vehicle Technician, Vehicle Mechanic, Commercial Vehicle Technician, Diagnostic Technician, Senior Technician, Master Technician, Mobile Vehicle Technician, PDI Technician, Prep Technician, MOT Tester, Fast Fit Technician, LCV Technician, Light Commercial Technician, HGV Technician, Bus Technician, LGV Technician, HGV Engineer, HGV Mechanic, HGV Fitter

Octane Recruitment cover a variety of different sectors including Technical, Mechanical, Engineering, Sales, Service, Aftersales, Bodyshop, Fleet & Rental Management, Accounts, Finance, Marketing, & Payroll, Managerial, Logistics, Parts, Administration, Call Centre / Contact Centre, Senior Appointments, Head Office Positions and Confidential Appointments.

JOB TITLE: COMMERCIAL AIR CON SERVICE / BREAKDOWN ENGINEER

PLACE OF EMPLOYMENT: Mobile Worker

You are required to travel to and work at various locations within the Birmingham, duduley, Coventry area as the Company shall reasonably require for the proper performance of your duties

SALARY: £45,000

HOURS: Monday - Friday 8:00am to 5:00pm (40 hours per week)

RESPONSIBLE TO: Directors

RECRUITMENT: This post is subject to a satisfactory DBS and reference checks

Summary of Duties:

Service and maintenance of air con appliances within both commercial and domestic properties.

Air conditioning/electrical fault finding experience within both commercial and domestic properties.

Main Duties:

Attend service and reactive breakdowns to fault find, diagnose and repair in a timely and cost effective manner.

Using knowledge and air conditioning fault finding experience to provide high levels first time fix and customer care.

To carry out the day to day responsive maintenance, service and repairs as instructed

To carry out servicing and safety checks on all air con systems

To make immediate decisions as regards the repair requirements should the original job order not reflect the actual works required and to inform the relevant director

To inform the customer (with reason) when it is not possible to complete a repair within the first visit and make mutually agreed arrangements to return to complete and inform the relevant director

Direct helpers engaged in assembly or installation of air con systems or components.

Liaise with management and or client to ensure all works are completed.

Ensure that all works and repairs are completed safely and in accordance with current codes and practices.

Abide by all client rules and regulations whilst on site (copy available upon request)

Ensure when purchasing materials, a 'best value and cost effective approach' is sought

To make sure that all training required to carry out the role is maintained and kept up to date.

To accurately complete all relevant documentation associated with the duties and ensure the prompt return to the office of all relevant information in relation to the daily tasks.

Where a Company vehicle is provided, ensure that it is used in accordance with the Company's current policies and procedures

Ensure that all company property, i.e. motor vehicle, uniform, tools etc… are operated safely, kept clean and in good order and tested when required to maintain the safe working of all heating systems

Actively take a proactive approach in finding and quoting additional works, should it be required.

Carry out site audits, vehicle audits, post work inspections, quotations and engineers meetings

Adhere to the Company policies and procedures, handbook and Health & Safety.

PERSON SPECIFICATION:

Essential:

• Recognised air conditioning apprenticeship and Commercial experience Air conditioning experience within the commercial sector e.g, fault finding, service, repair and maintenance on air condition installations and appliances.
• Working knowledge of test equipment including an electrical multi-meter
• Flexible approach:

due to travel aspect, this is a mobile position that will involve travelling to multiple sites across the West & East Midlands as well as some wider travel as required.

due to customer demands, the ability to work additional hours over and above contracted hours if and when required, where overtime would be payable.

• Be part of the emergency call out team on a rota basis
• To promote a positive and professional attitude to all customers and staff.
• Self- motivated and able to work under own initiative as well as within a team.
• Willing to undertake further training/development within the post as required.
• The ability to communicate effectively with tenants and other members of the public.
• Full UK Driving Licence
• Basic IT Skills
• Must have had or willing to have both vaccinations

Please call or send a CV to apply

IDN1