Total 7 Junior Executive level Engineering job vacancies in Dublin 2, Ireland

工作職責：

• 協調客戶或內部工具提供的新模具的新試運行。
• 建立以最短的周期時間生產最佳產品品質的流程，同時注意機器和模具的安全。
• 對新的或現有的模具、新產品和機器進行評估：預測機器、製程、模具或材料的具體問題。
• 進行室內產品分析和調查。
• 進行流程改進並為專案進一步改進提供想法。
• 必要時與客戶方就任何技術和品質問題進行互動。
• 在新產品批量生產前對進度進行監控和執行SPC。
• 確保所有產品都有適當的工程文件和工作手冊。
• 從新項目到零件批准階段與其他部門的合作包括參加NPEA會議和能力審查會議。

要求：

• 至少獲得工程文憑或同等學歷，並在塑膠射出製造環境中擁有至少 2 年相關經驗。
• 擅長分析根本原因並使用統計圖表。
• 強大的計劃、分析思考能力和解決問題的能力。
• 良好的人際交往能力，能夠作為團隊的一部分工作，激勵團隊努力並在現實的時間內實現目標。
• 積極主動，能夠在最少的監督下獨立工作。

津貼和福利：

• 開放文化
• 個人發展機會
• 每週工作 5 天

Job Responsibilities:

• To coordinate new test run of new mould supplied by customer or in-house tooling.
• To establish process that produces the best product quality with minimum cycle time at the same time taking care of machine and mould safety.
• To perform evaluation of new or existing mould, new product and machines: anticipate specific problem from machine, process, mould or material.
• To perform interior product analysis and investigation.
• To perform process improvement and contribute ideas for project further improvement.
• To interact with the counterpart on the customer side on any technical and quality issues when required.
• To monitor and perform SPC on new product before mass production on progress.
• To ensure proper engineering documentation and working manual for all products.
• To collaborate with other departments from new project till part approval stage included attending NPEA meeting and Capability Review Meeting.

Requirements:

• Process at least Diploma in Engineering or equivalent with at least 2 years relevant experience in a Plastic Injection Molding manufacturing environment.
• Excellent in analysis of root causes and use statistical chart.
• Strong planning, analytical thinker and problem solving skill.
• Good interpersonal skill, ability to work as part of team, to motivate team efforts and to deliver targets within realistic timelines.
• Pro- active and able to work independently with minima supervision.

Perks & Benefits:

• Open culture
• Personal development opportunities
• 5-day workweek

職責與責任

• • 直接向生產經理報告並與他密切合作以實現部門目標。
  • 確保公司的品質系統在部門內被理解並實施。
  • 與生產計劃員緊密合作，參考主生產計劃啟動每日生產計劃，以滿足客戶訂單並能夠及時交貨。
  • 根據需要對所有現有製造流程進行監控、審查和改進（包括 MO 工廠 GC 分析和監控）
  • 研究新製程、新技術在我們製程中應用的可行性。
  • 檢查製程參數和製造日誌表。在適當的情況下建議任何改進、預防措施和糾正措施。
  • 監控/提高製程穩定性和製程安全性。有關過程控制的建議，以獲得更一致的品質。減少客戶投訴。
  • 對產品、流程和系統不合格項進行根本原因分析並實施糾正和預防措施，並對所採取措施的違規行為進行追蹤。
  • 收集和分析有關流程、公用事業以及流程和工廠設備效率的數據。研究並嘗試新的試驗項目/流程。
  • 培訓和發展下屬，提高能力和知識。
  • 透過了解和了解現場 EHS 標準來維護安全的工作環境，並確保遵守地方、州和聯邦 EHS 法規。
  • 根據上級要求執行任何其他臨時任務。

要求

• • 候選人應至少擁有化學工程學位或同等學歷。
  • 至少2年製造環境相關經驗。
  • 化學製造業的工作經驗是一個額外的優勢。
  • 熟悉 ISO 9001 是額外優勢。
  • 最好熟悉執行工藝工程改進活動並管理合理的員工規模。
  • 必要時能夠在正常工作時間之外工作。
  • 能夠獨立工作或在較小的監督下工作。
  • 良好的英語和馬來語書面和口語溝通能力。
  • 精通 Microsoft Word 和 Excel。

津貼和福利

• 醫療保險
• 雜項津貼
• 小費
• 較高的 EPF 百分比

• 職責與責任
  • 直接向生產經理/助理生產經理報告並與他密切合作以實現部門目標。
  • 確保公司的品質系統在部門內被理解並實施。
  • 與生產計劃員緊密合作，參考主生產計劃啟動每日生產計劃，以滿足客戶訂單並能夠及時交貨。
  • 監控、審查並根據需要對所有現有製造流程進行改進，包括噴霧乾燥設備和煙囪的氣流測試。
  • 協助部門主管完成月末結算和報告。
  • 檢查製程參數和製造日誌表。在適當的情況下建議任何改進、預防措施和糾正措施。
  • 審查每日生產報告並根據生產計劃監控實際生產。
  • 確保對產品、流程和系統不合格項採取糾正和預防措施，並對所採取措施的違規行為採取後續行動。
  • 帶領值班主管實現工廠平穩且有效率的運行，以達到營運目標。
  • 培訓和發展技術人員並提高能力和知識。
  • 進行審核、檢查和 HIRARC 評估。
  • 檢測現有或潛在的健康和安全隱患，識別差距並提出糾正和預防措施建議。
  • 透過了解和了解現場 EHS 標準來維護安全的工作環境，並確保遵守地方、州和聯邦 EHS 法規。
  • 根據上級要求執行任何其他臨時任務。
• 要求
  • 候選人應至少擁有化學工程學位或同等學歷。
  • 至少2年製造環境相關經驗。
  • 化學製造業的工作經驗是一個額外的優勢。
  • 熟練使用 AutoCAD 計算機。
  • 有噴霧乾燥設備或濾袋系統經驗者優先。
  • 熟悉 ISO 9001 是額外優勢。
  • 必要時能夠在正常工作時間之外工作。
  • 能夠獨立工作或在較小的監督下工作。
  • 良好的英語和馬來語書面和口語溝通能力。

津貼和福利

• 醫療保險
• 雜項津貼
• 小費
• 較高的 EPF 百分比

• Duties & Responsibilities
  • To report directly to Production Manager/ Assistant Production Manager and work closely with him to achieve departmental objective.        
  • To ensure the company’s quality system is understood in the department and implemented.
  • To work closely with production planner to initiate Daily Production Schedule with the reference to Master Production Schedule to meet customer orders and be able to deliver timely. 
  • To monitor, review and make improvement if required on all existing manufacturing processes which including the air flow testing at spray dried plant and chimney.
  • To assist department head in month end closing and reporting.
  • To review process parameters and manufacturing log sheets. To recommend any improvements, preventive actions and corrective actions where appropriate.
  • To review daily production report and to monitor actual production against the production schedule.
  • To ensure corrective and preventive action is taken for product, process, and system non-conformances and to follow-up on the offences of the action taken.
  • To lead shift supervisor to achieve smooth and efficient running of plant to meet operation target.
  • To train and develop technicians and improve competency and knowledge.
  • To carry out audits, inspections, and HIRARC assessment.
  • To detect existing or potential health and safety hazards, gaps identification and recommend corrective and preventive measures. 
  • To maintain a safe working environment with awareness and knowledge of site EHS standards and ensure compliance with local, state and federal EHS regulations.
  • To perform any other ad-hoc task as and when required by the superior.
• Requirements
  • Candidate should possess at least a Degree in Chemical Engineering or equivalent.
  • At least 2 years related experience manufacturing environment.
  • Working experience in chemical manufacturing industry is an added advantage.
  • Computer literate in AutoCAD.
  • Experience in spray dried plant or filter bag system is an advantage.
  • Good knowledge in ISO 9001 is an added advantage.
  • Able to work beyond normal working hours when necessary.
  • Able to work independently or with minor supervision.
  • Good communication skills in English and Bahasa Malaysia, both written and spoken.

Perks & Benefits

• Medical insurance
• Miscellaneous allowance
• Gratuity
• Higher % EPF

• Duties & Responsibilities
  • To report directly to Production Manager and work closely with him to achieve departmental objective.
  • To ensure the company’s quality system is understood in the department and implemented.
  • To work closely with production planner to initiate Daily Production Schedule with the reference to Master Production Schedule to meet customer orders and be able to deliver timely.
  • To monitor, review and make improvement if required on all existing manufacturing processes (including MO Plant GC analysis and monitoring)
  • To study feasibility of new process and new technology to apply in our process.
  • To review process parameters and manufacturing log sheets. To recommend any improvements, preventive actions and corrective actions where appropriate.
  • To monitor/ improve process stability and process safety. Advice on process control to have more consistent quality. Reduce customer complaint.
  • To perform root cause analysis and implement corrective and preventive action for product, process and system non-conformances and to follow-up on the offences of the action taken.
  • To gather and analyses data on process, utilities and efficiency of process and plant equipment. Study and try new trial project/process.
  • To train and develop subordinated and improve competency and knowledge.
  • To maintain a safe working environment with awareness and knowledge of site EHS standards and ensure compliance with local, state and federal EHS regulations.
  • To perform any other ad-hoc task as and when required by the superior.
• Requirements
  • Candidate should possess at least a Degree in Chemical Engineering or equivalent.
  • At least 2 years related experience manufacturing environment.
  • Working experience in chemical manufacturing industry is an added advantage.
  • Good knowledge in ISO 9001 is an added advantage.
  • Preferably those familiar in carrying out process engineering improvement activities.
  • Able to work beyond normal working hours when necessary.
  • Able to work independently or with minor supervision.
  • Good communication skills in English and Bahasa Malaysia, both written and spoken.
  • Proficient in Microsoft Word and Excel.

Perks & Benefits

• Medical insurance
• Miscellaneous allowance
• Gratuity
• Higher % EPF

Anord Mardix, a Flex company, is the world’s leading electrical engineering and manufacturing firm specialising in critical power solutions. We promise innovative engineering solutions to all our clients, meeting the most technical requirements with ease, no matter what the challenge.

To support our extraordinary teams who build great products and contribute to our growth, we’re looking to add a Junior Electrical Design Engineer located in Dundalk, Ireland.

This role will provide excellent experience in the design and development of electrical switchgear and associated products. We are looking for a graduate level design engineer with an eye for detail who can work independently and as part of a team. Good interpersonal and communication skills are a must, as the successful candidate will work with multiple disciplines during products lifecycle.

What a typical day looks like:

• Under the direction and mentorship of senior members of the design team, carry out the electrical design of switchgear and other critical power distribution products.

• Create general arrangements and electrical schematics using AutoCAD and AutoCAD electrical

• Generate accurate bills of materials for purchasing along with other supporting documentation such as work instructions

• Maintain accurate & up to date records of designs and documentation

• Participate in providing technical support to internal and external customers, attending meetings where necessary

• Work actively within the engineering team to help foster a positive and supportive working environment

The experience we’re looking to add to our team:

• Have a third level qualification in Electrical Engineering or come from a related technical background

• Relevant experience in a switchgear production environment (electrical) will be considered in lieu of a third level qualification

• Have a solid understanding of electricity fundamentals and electrical circuit design

• Be proficient in the use of Microsoft Office tools

• Have a methodical approach to problem solving

• Understanding of electrical engineering drawings such as single line diagrams and schematics is advantageous

What you’ll receive for the great work you provide:

• An environment where you will feel fulfilled by your work, valued for your contribution, and celebrated for your success;
• Opportunities to learn new skills in a fast-paced industry;
• A competitive salary and benefits package that includes:
  • A merit-based annual pay review
  • Enhanced annual leave
  • Referral bonus
  • Sick pay scheme
  • Cycle to Work scheme
  • Enhanced maternity/paternity/ parents leave

• Flexible/ Hybrid Work based on your Job Function;
• Travel opportunities (role dependent);
• Support in your well-being by access to:
  • Employee Assistance Programme offering free access to qualified counsellors and expert advice
  • On-site trained Mental Health First Aiders
• Access to various discount programs (including food, activities, gym memberships etc.).

TH10

#LI-DNP

#LI-TONYHYNES