Total 41,143 system technician job vacancies in The United States of America

Responsibilities:-

1. Perform maintenance, testing and commissioning or repair services of Lift / Escalators

2. Attend to breakdowns, callbacks and customer requests, including 24-hour standby duty.

3. Troubleshoot equipment faults and carry out preventive and / or corrective action.

4. Ensure all work processes comply with quality, environmental and safety procedures and requirements.

5. Perform ad-hoc assigments.

Requirements:-

1. 1 to 2 year(s) of working experience in the related field.

2. Certificate / Diploma in Electrical, Electronic, Mechatronic or Mechanical Engineering

Perks & Benefits

• Commission and bonus
• Allowance (travel stipends, transportation, etc.)
• Company trips
• Paid training and development

We are looking for candidate who willing to work at on-site (variety of customer premise) and able to travel.

This is not FACTORY work.

Office at

1) Tmn Desa Tebrau, Johor

Responsibilities:

• To perform installation and services of Air Ventilator / Exhaust Fan
• To perform installation, services of HVLS Industrial Ceiling Fan
• To perform installation, services of Hand Dryer,
• To in charge for wiring activities
• Repairing the electrical items (Brand - Airegard, Houm)
• To handle scaffolding (work in height)
• Other duties assigned by superior.

Requirement:

• Experience in the related job task is required for this position.
• Experience with any type of HVAC products.
• Have experience in electrical wiring is welcome to apply.
• Willing to travel.
• Have a valid CIDB green card.
• At least have valid Driving License.
• Added advantage if you have a valid GDL License (3 ton)

Perks & Benefits

• Employee equity
• Allowance (travel stipends, transportation, etc.)
• Casual dress code
• Medical insurance
• Open culture
• Personal development opportunities

Responsibilities:-

1. Perform maintenance, testing and commissioning or repair services of Lift / Escalators

2. Attend to breakdowns, callbacks and customer requests, including 24-hour standby duty.

3. Troubleshoot equipment faults and carry out preventive and / or corrective action.

4. Ensure all work processes comply with quality, environmental and safety procedures and requirements.

5. Perform ad-hoc assigments.

Requirements:-

1. 1 to 2 year(s) of working experience in the related field.

2. Certificate / Diploma in Electrical, Electronic, Mechatronic or Mechanical Engineering

Perks & Benefits

• Commission and bonus
• Allowance (travel stipends, transportation, etc.)
• Company trips
• Paid training and development

1. OBJECTIVE

• Cooperate with sales team, business support team and technical team to perform aftermarket field service activities on Fusheng, FS Curtis & FS Elliott air compressors, Field service activities inclusive of commissioning, service, maintenance, repair, upgrade and troubleshoot.

• Maintain good customer relationship and increase customers’ satisfaction via top quality work at site.

2. JOB DESCRIPTION

• Perform all maintenance and service on compressed air systems for customers. Primarily Rotary Screw & Piston Compressor.

• Assist in workshop and warehouse activities inclusive of pre-commissioning, assist in stock count and unloading of equipment and parts.

• Be capable of preparing all work orders, time sheets etc.

• Assist in shop jobs including tear down, inspection and rebuilds of complete units.

• Mechanical assembly/disassembly abilities Electrical troubleshooting and diagnostic skills.

• Communication with technical Department to identify solutions to problems on compressors.

• Standby and on-call accordingly to duty roaster over the weekend / public holiday.

3. WORKING EXPERIENCE

• At least 2 Year(s) of working experience in the related field is required for this position.

• Required Skill(s): Mechanical & Rotating / Industrial Machinery Maintenance / Repair.

4. REQUIREMENT

• Candidate must possess at least Vocational school certification / Diploma / Advanced in any technical field.

• Preferably Junior Executive specialized in Engineering - Mechanical/Automotive or equivalent.

• Possess Good Driving License and able to operate forklift within company premise.

• Required language(s): Bahasa Malaysia, English, (Mandarin is an option)

5. PERSONALITY

• Good working attitude & persistency in pursuing own goals.

• Strong customer focused.

• Result oriented with a clear focus on the given tasks.

• Analytical person with innovative problem solving ability

• Must be able to work independently and as a team player

6. WORK STATION

• Shah Alam, Selangor / Across Malaysia.

• May require to travel within Peninsular Malaysia from time to time for outstation job assignment.

7. REMUNERATION PACKAGE

• Basic salary

• Overtime

• Out-station meal allowance

• Monthly incentive

• Year end bonus

8. OTHERS

• Preferable below 35 years old.

Perks & Benefits

• Commission and bonus
• Allowance (travel stipends, transportation, etc.)
• Medical insurance
• Personal leave
• Open culture
• Paid training and development

We are looking for a highly motivated & detail-orientated Field Service Technician to join our team. In this role, you'll play a key part in ensuring our lab and diagnostic equipment runs smoothly and efficiently at customer sites.

Responsibilities

• Perform on-site installations, trainings and follow comprehensive testing procedures to verify equipment is operating safely and correctly.
• Provide expert troubleshooting and repair support, assisting both customers and field service teams to resolve technical issues quickly and effectively.
• Conduct assigned service tasks and maintenance on schedule, ensuring customer satisfaction and meeting sales targets.
• Upkeep of service tools & facilities compliance on regulations, licensing requirement and standard issued by the statutory body etc.
• Generate timely & accurate reports and documentation

Requirements

• Minimum Diploma/Advance Diploma within science field – Applied Physics/Biomedical/ Electronic/Mechanical Engineering or equivalent.
• Good knowledge in repair, preventive maintenance & testing, commissioning methodologies and instruments. Experience with laboratory or diagnostic equipment is a plus.
• Strong problem-solving skills and attention to detail.
• Excellent communication and customer service skills.
• Ability to work independently and in a team environment.
• Must possess own car. Able to travel throughout Klang-valley and Outstation.
• Required language(s): Bahasa Malaysia, English.

Benefits

• Attractive salary with other remunerations such as allowances, commissions.
• Annual Bonus and incentives based on performance.
• Supportive and collaborative work environment.
• Training & Mentorship provided.
• Company Events and Trips.

Perks & Benefits

• Commission and bonus
• Allowance (travel stipends, transportation, etc.)
• Nearby public transport
• Company trips
• Paid training and development

Responsibilities:

• Offer service and customer support during field visits or dispatches.
• Connect workflow to schedule.
• Manage all on site installation, repair, maintenance and test tasks.
• Diagnose errors or technical problems and recommend proper solutions.
• Produce timely and detailed service reports.
• Operate vehicle in a safely manner and utilise field automation systems.
• Abide all company's filed procedures and protocols.
• Work with operation team and share information across the organization.
• Comprehend customer requirements and make appropriate recommendations/briefings.
• Build positive relationships with customers.

Requirements:

• Proven field service experience.
• Ability to troubleshoot, test, repair and service technical equipment.
• Ability to work flexible shifts and to adapt to changing work schedules.
• Proficient with mobile tools and applications.
• Possess at least Diploma or higher in IT or any relevant field.

Perks & Benefits

• Commission and bonus
• Allowance (attendance, travel stipends, transportation, etc.)
• Regular team activities
• Medical claim
• Birthday leave

Job Description :

• Perform service, maintenance and repair Ai Robotic machines in both warehouse and at customers’ sites
• Focus on Ai Robotic machine and general maintenance of equipment and machinery
• Carry out scheduled preventive maintenance on all equipment
• Be on-call to respond to urgent customer needs on site
• Able to travel outstation and work overtime to get job done
• Provide training to customer on the usage of equipment
• Visit sites to determine equipment application or inspect customer unit
• Work closely with Sales Team and System partner for presales support, proof of concept testing, debugging as well as installation

Requirement :

• Candidate must possess at least a Professional Certificate of SPVM, Vokaional, Diploma, Degree in Electrical, Electronic, Mechanical or equivalent
• Prefer 1 – 2 years of experience with electrical, mechanical and robotic systems
• Know how to read and interpret electrical circuit diagrams
• Able to communicate in Bahasa Malaysia and English, Mandarin is an added advantage
• Possess own car and driving license. GDL license in an added advantage
• Applicant must be willing to work in Kajang, Selangor. Travel is required, thus flexibility is a must.

Benefits :

• 5 working days
• EPF, Socso & SIP
• Incentive and Performance Bonus
• Allowances
• Group Personal Accident & Hospitalisation Insurance
• Annual Leave
• Open Culture
• Personal development opportunities
• Training and development

Job scope as follows:

• Candidate are required to execute and perform project or service coordination on assignment basis at customer premises.
• Provide troubleshooting, diagnosis & repairing works on of fluid handling equipment and mechanical rotating related equipment.
• Generate and issue troubleshooting, diagnosis and service report to customer.
• Follow up and obtain approval from customer to execute repair and service activities.
• Assist and pre-arrangement with customer’s for field service activities.

Requirement:

• Candidate with general understanding of mechanical, piping and electrical engineering and fluid handling equipment and experience will be added advantage
• Able to communicate in English / Bahasa and Mandarin
• Possess good customer service with positive mindset.
• Candidate must possess at least Diploma/Advanced/Higher/Graduate Diploma in Engineering, Engineering (Industrial), Engineering (Mechanical) or equivalent.
• At least 2 Year(s) of working experience in the related field is required for this position
• Preferably Senior Executive specialized in Engineering - Industrial or equivalent.
• Relevant experience without certificate may also apply.
• With experience in repair and troubleshooting on pumps will be added advantage.
   

Perks & Benefits

• Personal leave
• Open culture
• Personal development opportunities

• Process accounts and incoming payments in compliance with financial policies and procedures.
• Perform day to day financial transactions, including verifying, classifying, computing, posting and recording accounts receivable data.
• Verify discrepancies and resolve billing issues.
• Update account status records and collection efforts.
• Review and send out past due notices.
• Communicate with customers regarding billing discrepancies and questions.

Perks & Benefits

• Allowance (travel stipends, transportation, etc.)
• Medical insurance
• Personal development opportunities
• Paid training and development
• Yearly health screening

Duties & Responsibilities

• To follow instruction and co-operate with the superior.
• To check and ensure the right type and correct quality of raw materials are used for resin manufacturing.
• To carry-out in-process checking and testing in accordance with the standard test methods.
• To assist in charging of raw materials, cleaning of equipment and any maintenance work.
• To complete the process logsheet - the process time, parameter, the date, shift, checklist and yield accordingly as stipulated in the logsheet and work instruction.
• To pack and pump the finished goods in accordance to the instruction given by Supervisor or stated in the logsheet.
• To ensure good housekeeping.
• Any other duties as assigned by Shift Supervisor.
• To maintain a safe working environment with awareness and knowledge of site EHS standards and ensure compliance with local, state and federal EHS regulations.
• To perform any other ad-hoc task as and when required by the Shift Supervisor.

Requirements

• Candidate must possess at least SPM level.
• Able to work under pressure in a fast-paced environment.
• Good initiatives and good team player.
• Strong interpersonal integrity.

Perks & Benefits

• Medical insurance
• Miscellaneous allowance
• Gratuity
• Higher % EPF

Job Requirements:

• Be on 24 hours stand-by based on the schedule roster assistance to manage faults within area of concerned within the agreed timeline.
• To perform on site intervention to restore and rectify faulty equipment to restore equipment functionality within the required agreed indicators.
• Perform rigger activities as per required during attending network failure, preventive maintenance and other event, including service delivery activities as per the agreed quality and timeline.
• Managing all work slips issued and effectively managed it’s open and close within the allowable timeline.
• Performed the required routine preventive maintenance, CA, RF, WO, MR updates and all related work on network elements are within agreed timeline.
• Attending customer complaints within area of responsibility as assigned and directed by Superiors within the agreed timeline.
• Recording of all TT logs requirement, timesheet and all reporting in the relevant log book and system and ensuring all data are updated accurately at all times.
• Execution of all agreed improvement initiatives to improve team performances.
• Execution of work activities in a safe manner with well-maintained and secure work place prior, during and after every job completion as per the required guidelines and requirement which includes site access and supervision.
• Support execution and implementation of projects based on agreed scope of work and required timeline by performing required agreed activities based on project requirements.
• Ensure that all sites are in good and safe working environment by identifying potential danger and propose corrective actions to mitigate the danger.
• Ensure that all sites are properly secured and to control access to site by ensuring only authorized personnel can enter the site premise through the prescribed processes.
• To support site access and key management and accompany 3rd party activities on site when necessary based on project requirements.
• To adhere and implement company’s EHS policy, that includes:
• Be aware of the company OSHE as well as hazards/ aspects and their risks/ impacts in their work area.
• To take reasonable care for the safety and health of himself and other persons who may be affected by his acts or omissions at work.
• To cooperate with employer or any other person in the discharge of any duty or requirements imposed on the employer or that other person by the OSHA 1994 or any regulations made there under.
• To wear or use at all times any protective equipment or clothing provided by the employer for the purpose of preventing risks to his safety and health.
• To comply with any instruction or measure on OSHE instituted by his employer or any other person by or under the OSHA 1994 or any

Perks & Benefits

• Allowance (travel stipends, transportation, etc.)
• Medical insurance
• Annual leave
• Medical leave

Help Desk & IT Support (Information & Communication Technology)

Full time

Job Responsibilities :

1. Assemble and thoroughly check laptop/PC orders and able to finish the orders

neatly within stipulated time.

2. Provide technical support for computer hardware and software errors - Assist

customers through multiple platforms, including face-to-face, over the phone, email,

or social media platforms to resolve issues.

3. Computer hardware diagnostic skills - Able to determine/troubleshoot computer

errors' root causes before the repair are performed.

4. Provide good customer service for customers who call in and send in systems for

RMA.

5. Respond and resolve open cases in a timely manner using available resources

within the company.

6. Prioritize and manage many open cases simultaneously.

Job Requirements :

1. Minimum a SPM holder or equivalent with at least 2-year experience in an

computer assembly role or technical support environment.

2. Possess good computer/hardware knowledge and skills

3. Good communication skills in English and Bahasa

4. Possess multi-tasking capabilities and excel under pressure

5. Good analytical and problem-solving skills

6. Ability to work effectively in a team environment

Perks & Benefits

• Personal leave
• Personal development opportunities

職責：-

1. 執行電梯/自動扶梯的維護、測試和調試或維修服務

2. 處理故障、回電和客戶請求，包括 24 小時待命值班。

3. 排除設備故障並採取預防和/或糾正措施。

4. 確保所有工作流程符合品質、環境和安全程序和要求。

5. 執行臨時任務。

要求：-

1. 1至2年相關領域工作經驗。

2. 電氣、電子、機電一體化或機械工程證書/文憑

津貼和福利

• 佣金和獎金
• 津貼（旅費、交通費等）
• 公司旅行
• 有薪培訓和發展

Job Roles:

• Answering inquiries through multiple channels and media venues while maintaining excellent customer service.

• Helping potential customers customize and configure computer system sales by providing upgrades and/or up-selling solutions that best fit the customer’s needs and ensures the order is completed.

• Maintaining follow-up and positive customer relations throughout the entire order and after-sales service processes.

• Problem Solving – Identifies and resolves problems in a timely manner; Gathers and analyzes information skillfully; Develops alternative solutions; Works well in group problem solving situations.

• Technical Skills – Assesses own strengths and weaknesses; Pursues training and development opportunities; Strives to continuously build knowledge and skills; Shares expertise with others.

• Customer Service – Manages difficult or emotional customer situations; Responds promptly to customer needs; Solicits customer feedback to improve service; Responds to requests for service and assistance; Meets commitments.

Job Requirements:

• Friendly, talk active and outgoing person.

• Good communication skill.

• Proficient Typing skills

• Able to communicate in English and Bahasa Malaysia.

• Accountability – Holds self accountable; Invests in own education, development, and personal motivation and holds self to performance standards.

• Excel under pressure

• Fresh graduates are welcomed!

Perks & Benefits

• Personal leave
• Personal development opportunities

1. 目標

• 與銷售團隊、業務支援團隊和技術團隊合作，對復盛、FS Curtis 和 FS Elliott 空氣壓縮機進行售後現場服務活動，包括調試、服務、維護、維修、升級和故障排除。

• 透過高品質的現場工作維護良好的客戶關係並提高客戶滿意度。

2. 職位描述

• 為客戶執行壓縮空氣系統的所有維護和服務。主要是旋轉螺桿和活塞壓縮機。

• 協助車間和倉庫活動，包括預先調試、協助庫存盤點以及設備和零件的卸載。

• 能夠準備所有工單、時間表等。

• 協助車間工作，包括完整單元的拆卸、檢查和重建。

• 機械組裝/拆卸能力 電氣故障排除和診斷技能。

• 與技術部門溝通以確定壓縮機問題的解決方案。

• 週末/公共假期根據當值烘焙師的情況進行待命和值班。

3. 工作經歷

• 該職位需要至少2 年相關領域的工作經驗。

• 所需技能：機械和旋轉/工業機械維護/修理。

4. 要求

• 候選人必須擁有至少任何技術領域的職業學校證書/文憑/高級證書。

• 最好是工程專業的初級管理人員 - 機械/汽車或同等專業。

• 擁有良好的駕駛執照，並且能夠在公司範圍內操作堆高機。

• 所需語言：馬來語、英語（可選擇國語）

5. 個性

• 良好的工作態度和堅持不懈地追求自己的目標。

• 強烈以客戶為中心。

• 以結果為導向，明確地關注給定的任務。

• 具備創新解決問題能力的分析人員

• 必須能夠獨立工作並具有團隊合作精神

6. 工作站

• 莎阿南，雪蘭莪/整個馬來西亞。

• 可能需要不時前往馬來西亞半島進行外地工作分配。

7. 薪資待遇

• 基本工資

• 隨著時間的推移

• 外站餐補

• 每月獎勵

• 年終獎金

8. 其他

• 35歲以下優先。

津貼和福利

• 佣金和獎金
• 津貼（旅費、交通費等）
• 醫療保險
• 事假
• 開放文化
• 有薪培訓和發展