Total 859 Others level Art / Design / Entertainment job vacancies in Glass - Long Island

Job Requirements

• Leading a Team of Tankage Design Engineers to execute the Tankage Design Engineering of the Project which includes design of Fixed Roof Tank / Floating Roof Tank as per API 650, Low Pressure Tank as per API 620, Spherical Tank and Bullets as per ASME Section VIII & Cryogenic Double Wall Tanks as per API 620 & API 625.
• Review & Checking of Tankage Design Documents such as Design Calculation for Tank, Finite Element Analysis, Tank Data Sheets, Tankage Material specification, Tankage Fabrication Drawings & ensure Compliance to API 650, API 620, API 625, ASME Sec VIII, AP 2000 and all Applicable Codes & Standards.
• Interface Management with Lead Engineers, Client, Contractors, Vendors, Government Agencies and Certification agencies.
• Preparation, Monitoring and Control Engineering Document Control List and expedite for delay / approvals / resolution of open issues.
• Review and ensures that all works are carried out in accordance with project specification. Maintain Design integrity and quality within the Project Engineering Team
• Preparing Engineering schedule and Engineering man hours estimation to meet project requirements.
• Coordination with PMC and Construction Coordination.
• Participates in discipline and inter-discipline design check and screening meetings for compatibility, completeness and correctness in works.
• FEED & Pre-Bid works which involves Feasibility study & MTO estimation works.
• Preparation of Technical Specification for Works and Technical Bid Evaluation
• Preparation and Compliance for Engineering Audit Requirements.
• Job assignments, Mentoring and Supervision of works for Designers and Design Engineers.
• Technical assistance to construction activities and attending to Site Queries.
• Preparation of Foundation Loading Data.
• Generate 2D construction drawings and data sheet.
• Preparation of purchase requisition for tank accessories such as roof seal, roof drain system, aluminium dome roof & etc. Preparing technical bid evaluation for item purchased. Checking vendor’s calculation & construction drawings.
• Checking of construction drawings. Preparation of bill of material for purchasing.
• Preparation of technical queries to client base on design deviation.
• To be proactive in creating a safe working environment for everyone and ensuring that HSE in-house rules are observed at all times.
• To consider HSE aspects when planning and carrying out tasks to eliminate and reduce HSE hazards, aspects and risks.

Qualification

Preferably Bachelor of Engineering (Mechanical)

Experience

Preferably Minimum 15 years of experience

Software Requirements

1) Autocad

2) Good proficiency in MS Excel, MS word

Code Knowledge

1) API 650/ API 620

2) ASME Section VIII D1 & D2

3) ASME Section II Part A & D

4) ASTM

5) NFPA

Job Responsibilities:

• Be responsible for the conceptualization to execution of design and layout of artworks.
• Art direct the end-to-end process of assignments.
• Liaise with stakeholders including Marketing teams, other Business Units’ requestors, and vendors on producing artworks and signage collaterals.
• Seek stakeholders’ approval on all artwork and collaterals.
• Assist in daily administration matters, dealing with procurement and external vendors on signage collaterals, filing, invoicing, obtaining quotations, costing, fabrication and installation of the artworks and signages.
• Assist other creative designers when required.
• Work on enhancing visuals artwork and signage collaterals when required.
• Communicate with team and Project Manager to ensure workflow is on track.

Job Requirements:

• Diploma or Degree holder in Art / Design / Creative Multimedia or equivalent discipline.
• Proficient in the following software: Adobe Photoshop, Illustrator, InDesign, MS Office applications, Final Cut Pro (optional), and Premiere Pro (optional).
• Strong attention to detail to oversee design projects from conception to completion.
• A good team player with strong work ethics.
• Ability to work independently with a creative flair.
• Ability to work in a well-organized manner under pressure, and possess good time management skills to meet tight deadlines.
• Flexibility to work on a rostered 4-day work week, 12-hour shift including break.

Job Description:

• Experienced in structural engineering design works mainly for road/viaduct projects.
• Supervision of drafting for the preparation of project documentation.
• Prepare designs, sketches and reports with supporting calculations for projects, and supply drafting staff with information to assist in the production of detailed drawings, the development of quantities, materials lists and cost estimates as required.
• Assist in the preparation of technical detail for quotations, contract documentation and technical specifications.
• Prepare technical submissions for materials, construction methods and C&S shop drawings.
• Liaise with suppliers, clients, consultants or commissioning engineers concerning the design, installation or construction and commissioning of assigned work.
• Participate in the planning of projects as required.
• Previous experience in the use and application of Appropriate Singapore local and international Standards for structural design.
• Attend site inspection with required

Job Requirement

• Bachelor of Engineering (Civil) with minimum 5 years of structural engineering experience.
• Good knowledge of the various engineering design software, for instance Autocad, BIM
• Experienced in LTA projects would be advantage.
• Excellent written and verbal communication skills with an excellent eye for detail.
• Team Player.
• Meeting delivery deadlines and budgets.

Benefits:

• Flexible timing by earning up to 20k
• Entry level are welcome
• Our client emphasises on good career progression

Job Description:

This is a full time role for an Interior Designer Sales located in Venture Dr. Our client is a prominent interior design firm based in Singapore. You will handle potential clients and leads provided by the company, developing design concepts, and preparing proposals and quotations to secure tenders and projects. The job requires creating unique design proposals, managing renovation sites and subcontractors, and reviewing drawings before submitting them to the Creative Director and clients. Experience in overseeing projects from start to finish, including sales, design, and execution, is highly advantageous. The candidate should have a strong eye for design details, be proactive with excellent coordination skills, and work well in a team, with the ability to meet tight deadlines.

Qualifications:

• Sales driven, competent customer management.
• Strong knowledge of materials, fittings and finishes.
• Basic technical knowledge on tiling, carpentry and project management are an added advantage.
• Able to churn mood boards, 2D layout plans and quotations.
• Proficient in Kujiale (Coohom), Sketchup, AutoCAD, Photoshop, Illustrator and other design related software to develop ideas and articulate design intent.
• Minimum of 2 years working experience in sales. Able to show a portfolio of projects that are completed within the last 6 months.
• Must be able to demonstrate that end to end interior designer work experience.

Responsibilities:

• Work closely with design engineers and architects to create and document detailed test plans for verifying the SoC design.
• Establish and manage the infrastructure and environment for automated verification of the SoC's architecture, functionality, and performance.
• Develop reusable testbenches, test cases using constrained-random and directed methods, and verification modules for both block and system levels.
• Create a regression strategy, methodology, and scripting tools, ensuring comprehensive function coverage and addressing verification gaps before design releases and tape-out.
• Collaborate with design engineers to troubleshoot and resolve simulation issues.
• Provide support to test engineers during post-silicon validation.
• Mentor and guide team members and junior engineers, aiming to enhance verification efficiency.
  

Requirements:

• Master in Electrical Engineering or equivalent with 8 years of relevant working experience/ PhD in Electrical Engineering or equivalent with 3 years working experience.
• Extensive understanding of UVM/OVM, Semiformal Verification, assertion-based verification, and hardware-software co-verification methodology.
• Skilled in Verilog, SystemVerilog, Python, Perl, TCL, Shell scripting, C/C++, SystemC, and assembly coding for industry-standard ISAs.
• Familiar with MIPI, AMBA (APB/AHB/AXI) bus protocols, RISC-V/ARM, or DSP cores.
• Experience in verifying designs at RTL and post-P&R gate levels.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact win@hkmsvs.com for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Description

• Design and manage Cloud infrastructure solutions utilizing leading-edge technologies and frameworks
• Maintain Cloud servers and applications including security configurations, patching, service requests and troubleshooting
• Manage disaster recovery and create backup policies.
• Monitor system performance and ensure reliability and high availability
• Conduct technical reviews and audits of cloud infrastructure
• Stay current with industry trends and recommend changes to maintain competitive advantage
• Provide Database Administration support for SQL (MS SQL) and NoSQL (MongoDB, DynamoDB, etc.)

Requirements

• Experience with cloud services (AWS, Google Cloud, Azure etc.)
• Experience with virtualization technologies, such as VMware and Docker
• Knowledge of system security (e.g. intrusion detection systems) and data backup/recovery
• Experience with network infrastructure and SQL database administration
• Familiarity with programming languages such as Python to automate tasks
• Understanding of cloud computing deployment models
• Strong problem-solving skills and ability to manage complex systems
• BSc degree in Computer Science, Engineering or a relevant field
• Certifications such as AWS Certified Solutions Architect, Microsoft Certified: Azure Solutions Architect Expert will be a plus

Please note: This is not a Remote role and will require the incumbent to be based in Singapore and work a hybrid schedule. This is an Individual Contributor role.

POSITION OVERVIEW

The successful candidate will be a Senior Technical Lead within the TISC (Technical, Innovation & Supply Chain) architecture team supporting the CPS (Commercial Product Supply) and NAOU (North America Operating Unit) organizations through ensuring all technology delivered meets standards to drive supply chain transformation initiatives. This role is critical to enabling digital transformation through supply chain transformation and ‘plant of the future’ initiatives.

The role focuses on translating business needs into technical systems solutions, within a structured agile framework. This will entail defining systems in relation to enterprise infrastructure, executing activities related to business, IT and partnering with internal and external technical teams in the delivery of solutions. The candidate will have a key role in identifying and recommending products and features, evolving the organization's technical infrastructure as well as leading the implementation of new procedures and techniques.

QUALIFICATIONS & RELATED EXPERIENCE

• Bachelor’s degree in Computer Science, Engineering or significant practical experience in a related field.
• Minimum of 8 years related work experience preferably in manufacturing IT or process Industry.
• Must have proven experience working with IT, OT and supply chain architectures including designing, developing, deploying, managing, and scaling applications.
• Must have a strong practical knowledge of data management, data infrastructure, data Interfacing through Azure based deployments with a focus on maintenance and improvement.
• Should be proficient in supply chain end to end processes, using ERP systems (e.g. SAP).
• Advantageous additional desirable skills would include hands on experience at scale with workload management (Kubernetes). Some practical exposure to scripting (Python) and object orientated coding is also desirable.

KEY DUTIES AND RESPONSIBILITIES

• Design, develop and implement scalable, robust and secure IT & ITOT architectures that support the end-to-end supply chain lifecycle, including procurement, production, logistics, warehousing and distribution.
• Collaborate with business owners to respond to their needs with thought out technical requirements
• Designing and developing solutions in alignment with the enterprise architecture direction & standards and ensuring compatibility and ease of integration with company architectures.
• Oversee the integration of SAP/ERP supply chain applications, ensuring seamless integration with Ignition based infrastructure.
• Providing architectural support for business and ITOT applications by configuring, managing system settings, installing plugins and performing upgrades.
• Lead and guide the development of regional technical teams and junior staff in terms of future production enabling architectures.
• Exemplifying the use of DevOps, Github and other CI/CD tools and mentoring junior personnel in these behaviours.

What can help you be successful in the role?

Growth Behavior:

• Growth Mindset: Demonstrates Curiosity. Welcomes failure as a learning opportunity.
• Smart Risk: Makes bold decisions/recommendations.
• Externally Focused: Understands the upstream and downstream implications of his/her work.
• Performance Driven & Accountable: Has high performance standards. Outperforms her/his peers.
• Fast/Agile: Removes barriers to move faster. Experiments and adapts. Thrives under pressure and fast pace.
• Empowered: Brings solutions instead of problems. Challenges the status quo. Has the courage to take an unpopular stance.

Leadership Behavior

• Act Like an Owner: Deliver results, creating value for our brands, our System, our customers and key stakeholders.
• Collaborate with the System, Customers and Key Stakeholders
• Develops Self and Others: Develop self and support others' development to achieve their full potential.
• Drive Innovation: Generate new or unique solutions and embrace new ideas that help sustain our business.

What We Can Do For You

• Career growth and development: Leveraging our boundaryless network, we provide access to educational platforms and provide coaching, mentoring and feedback, as a part of our Leadership & Development process.
• Diverse and inclusive culture: You’ll be embraced for who you are and empowered to use your voice to help others find theirs. We want to make our culture inevitable.
• International Experience: Become part of international projects and work along multicultural teams, through our global network.

Location: Jurong East, Singapore

Key Responsibilities:

• Lead the design process from concept development through to completion of construction.
• Liaise and coordinate with sub-contractors and vendors on projects and work to alleviate conflicts, dispute.
• Collaborate closely with clients, project managers, and consultants to ensure all design objectives are met, completion within project timelines and budget.
• Ensure compliance with Architectural specifications, and achieve a quality aspect of architectural works without deviation to authority requirements
• Create innovative and aesthetically pleasing architectural designs that reflect the unique vision along with the ability to align with clients’ requirements.
• Develop detailed architectural drawings, renderings, and presentations using industry-standard software.
• Conduct site visits and inspections to ensure construction progress meets design intent and quality standards.
• Stay abreast of emerging trends, technologies, and best practices in architecture and design.
• Mentor junior staff members and provide guidance and support as needed.

Qualifications

• Bachelor's or Master's degree in Architecture from an accredited institution, preferably with accreditation with the Board of Architects, Singapore
• Minimum of 5 years of experience working in an architectural firm, with a focus on high-end residential, commercial, or hospitality projects.
• Knowledge of local regulations and authority submission procedures.
• Proficiency in AutoCAD, Revit/ArchiCAD, V-ray SketchUp, Adobe Creative Suite, 3D Modelling/Sketchup, Adobe Photoshop/Microsoft Programs, or any basic architecture software.
• Strong design sensibility and ability to develop innovative and compelling design concepts.
• Excellent communication, presentation, and interpersonal skills.
• Have keen eye for details
• Ability to work effectively in a collaborative team environment.
• Experience in both team management and project management.
• Able to independently or under supervision prepare drawings and or documentation at all stages of the project
• Ability to manage multiple priorities effectively within schedules and budgets.

Benefits:

• Competitive salary with performance-based incentives.
• Collaborative and inclusive work environment.
• Collaborative and entrepreneurial work culture.
• Opportunity to make a significant impact and drive growth within a growing Design & Architecture SME.

Job Descriptions:

• Design and obtain full basic design approval (FBDA) and detail engineering approval (DEA) from classification society dimension for semi-submersible platform/floater to accommodate large 15-22MW Floating Offshore Wind Turbine (FOWT)
• Prepare and calculate overall floater design, tank capacity, towing & operation draft, mooring and anchor system arrangements of FOWT floater
• Prepare design briefs and/or technical specifications for stability analysis, coupled load analysis, hydrodynamic analysis, aerodynamic analysis, mooring analysis, structural design, etc. of FOWT floater
• Prepare technical specification for cathodic protection and mooring system installation of FOWT floater
• Perform Mooring analysis report in time domain of FOWT floater
• Perform Hydrodynamic and wave load analysis report in time domain of FOWT floater
• Perform Coupled Load analysis report in time domain of FOWT floater
• Perform Stability analysis report of FOWT floater
• Perform overall philosophy, lifting, installation, transport and load out analysis report of FOWT floater
• Perform lifting, towing (dry and wet) and float-over and installation analysis report of FOWT floater
• Perform ocean basin model test specification of FOWT floater
• Perform 3D model numerical simulation of FOWT floater
• Perform and monitor the weight and central of gravity report of FOWT floater
• Perform motion, air gap and freeboard analysis report
• Review, analyse and comment methodologies and results from external specialist
• Responsible to liaise and close all comments with classification societies pertaining to FBDA and DEA of FOWT floater
• Prepare technical reports, applications, memo, etc. for patent of intellectual property of FOWT floater

Requirements:

• Min. Bachelor Degree of Marine Engineering or Naval Architect
• Min. 10 years of working experiences related to Marine & Offshore Structure Design including both basic/conceptual design and detail design.
• Possess experiences or knowledge of wind farm foundation, offshore sub-station, floater wind design and analysis will be preferred
• Familiar with jack-up vessel, heavy lifting vessel, Cable Laying vessel design and calculation
• Must be familiar in using AutoCAD plus at least 2 other engineering software: SESAM / ORCAFELX / GHS / SACS
• Lead in-house team to analysis/ calculation/ design support structure, sea fastening, mooring, ballasting, stability and towing plan for sea transportation, load out, heavy lifting / installation.
• Familiar in Marine & Offshore Industrial standards and codes.
• Team player & communication skills when interacting with both Client & Third Party.
• Subsea civil engineering experience will be advantage.
• May require short term travel.

Our company is an innovative, global healthcare leader that is committed to improving health and well-being around the world with a diversified portfolio of prescription medicines, vaccines and animal health products. We continue to focus our research on conditions that affect millions of people around the world - diseases like Alzheimer's, diabetes and cancer - while expanding our strengths in areas like vaccines and biologics.

Our ability to excel depends on the integrity, knowledge, imagination, skill, diversity and teamwork of an individual like you. To this end, we strive to create an environment of mutual respect, encouragement and teamwork. As part of our global team, you’ll have the opportunity to collaborate with talented and dedicated colleagues while developing and expanding your career.

We are seeking an energetic, collaborative and self-driven professional to join the Digital Supply Chain value team to play an active role in transformation journey to become the leading digital supply chain organization that leverages data, technology and processes to deliver end to end solutions enabling enterprise-wide collaboration, customer satisfaction, and seamless orchestration.

WHAT YOU WILL DO

The Value Team Architect works closely with Product Line Leads, Product Managers and all squad members to create a modular, scalable solution that addresses/incorporates future architectural changes and designs.

Responsibilities

In collaboration with the Value Team Lead, Product Line Leads, Product Managers and Lead Engineers you will work on the following:

• Understand
  supply chain domain business use cases, opportunities and challenges
  current industry technology trends and introduce best practices to Value Team
• Create
  architecture deliverables and artifacts relevant for accountable architecture domain(s)
• Drive
  the technology strategy for the Value Team that aligns with the business needs and enterprise architecture strategy
  the notion of reusable architecture assets & standards such as current-state business/technology capability maps as well as future state planning roadmaps for the Value Team.
  Tech Center strategy for Digital Supply Chain organization by boosting collaboration within Singapore and across all locations in Technology Center network
  Our workforce pipeline in Value Team by leveraging company programs to onboard, mentor and upskill the leaders of the future in Technology Centers
• Partner with
  product teams to use agile, value-centric, business outcomes-oriented, and total cost of ownership-based principles to guide decision making
  product line solution architects to develop a documented business, solution, information, and data architecture for supply chain
  architecture community and leaders across the Value and Enabling Teams in the division focusing on data and analytics, manufacturing and quality systems
  Enterprise Architecture team to drive the adoption of company architecture standards and blueprints
• Manage
  Architecture Governance within the Value Team
• Train and mentor
  technical delivery teams to understand, embrace, and successfully implement solutions following the architecture strategy

WHAT YOU MUST HAVE

Education

• B.A./B.S. or M.A./M.S. in a scientific or technical discipline (such as computer science, engineering, biology, chemistry, etc.)

Required Experience and Skills

• 10+ years of relevant work experience in the pharmaceutical/life sciences or similar industry, with demonstrated hands-on experience in solution architecture and information system designs
• 10+ years of experience in leading development squads/ teams in global environment
• Strong understanding of enterprise, solution and information architecture principles
• Domain knowledge of technology for supply chain management including data and analytics platforms, ERP solutions, supply chain planning, warehousing, distribution and logistics
• Experience in working closely with a range of business lines to identify business needs and opportunities
• Experience with Agile ways of working, leading or working as part of scrum teams
• Experience as a change agent of transformation to product model organization/ operating model
• Excellent interpersonal and communication skills, with the ability to quickly establish productive working relationships with a variety of stakeholders
• Ability to perform under broad direction taking initiative and full responsibility for meeting allocated technical and/or project/supervisory objectives

Preferred Experience and Skills

• Demonstrated ability to solve problems with a sense of ownership, enthusiasm and innovation
• Knowledge of current cloud trends and offerings, and extensive hands-on experience and strong expertise in cloud engineering
• Certifications in AWS and/or modern data technologies

Who we are

We are known as Merck & Co., Inc., Rahway, New Jersey, USA in the United States and Canada and MSD everywhere else. For more than a century, we have been inventing for life, bringing forward medicines and vaccines for many of the world's most challenging diseases. Today, our company continues to be at the forefront of research to deliver innovative health solutions and advance the prevention and treatment of diseases that threaten people and animals around the world.

What we look for

Imagine getting up in the morning for a job as important as helping to save and improve lives around the world. Here, you have that opportunity. You can put your empathy, creativity, digital mastery, or scientific genius to work in collaboration with a diverse group of colleagues who pursue and bring hope to countless people who are battling some of the most challenging diseases of our time. Our team is constantly evolving, so if you are among the intellectually curious, join us—and start making your impact today.

Job Description:

• Experienced in structural engineering design works mainly for road/viaduct projects.
• Supervision of drafting for the preparation of project documentation.
• Prepare designs, sketches and reports with supporting calculations for projects, and supply drafting staff with information to assist in the production of detailed drawings, the development of quantities, materials lists and cost estimates as required.
• Assist in the preparation of technical detail for quotations, contract documentation and technical specifications.
• Prepare technical submissions for materials, construction methods and C&S shop drawings.
• Liaise with suppliers, clients, consultants or commissioning engineers concerning the design, installation or construction and commissioning of assigned work.
• Participate in the planning of projects as required.
• Previous experience in the use and application of Appropriate Singapore local and international Standards for structural design.
• Attend site inspection with required

Job Requirement

• Bachelor of Engineering (Civil) with minimum 3 years of structural engineering experience.
• Good knowledge of the various engineering design software, for instance Autocad, BIM
• Experienced in LTA projects would be advantage.
• Excellent written and verbal communication skills with an excellent eye for detail.
• Team Player.
• Meeting delivery deadlines and budgets.

Job Responsibilities:

• Identify project design hazards, construction risks, and constructability issues.
• Develop corresponding mitigation measures together with the project team.
• Chair regular risk mitigation meetings and training with clients and internal parties.
• Advise management on alternative safer and higher productivity construction methodologies.
• Review method statements and risk assessments for safety and construction compliance.
• Attend meetings related to construction progress, risks, etc.
• Any other duties as assigned by the Managements.

Job Requirements:

• Have reasonable exposure in safety and health for construction especially on transportation infrastructure projects in a similar nature
• Attended the Design for Safety (DfS) for Professional Course and passed the assessment or equivalent.
• A registered PE or Architect with a Practicing Certificate OR
• Minimum 10 years relevant experience in the design and the supervision of the construction of structures with at least 5 years in design which includes contributions to designs and writing specification
• Have a degree accepted by PE Board or Board of Architect and construction related degree accepted by Singapore Institute of Surveyors (SISV) and Society of Project Managers (SPM)
• Possess excellent leadership, planning, good management skills, interpersonal communication and negotiation skills
• Have experience in LTA projects have an advantage

Job Title: Interior Design Drafter

Reports To: Senior Designer / Design Manager

Job Overview:

The Interior Design Drafter is responsible for creating accurate technical drawings and plans based on the specifications provided by interior designers and project managers. This role involves translating design concepts into precise CAD drawings, ensuring all plans comply with local building codes and project requirements.

Key Responsibilities:

1. Drafting and Design

• Prepare detailed technical drawings, floor plans, elevations, sections, and 3D models as needed.

• Collaborate with designers to convert concepts into functional layouts.

• Develop joinery and furniture design details with accurate specifications.

2. Coordination

• Coordinate with project teams, architects, contractors, and suppliers to ensure accuracy and feasibility of designs.

• Revise drawings based on feedback and changes to project requirements.

3. Compliance and Standards

• Ensure drawings meet building codes, safety regulations, and company standards.

• Maintain a high standard of accuracy in all technical drawings.

4. Documentation

• Organize and maintain drawing archives for easy retrieval and reference.

• Assist in preparing design presentations with accurate visual documentation.

5. Project Support

• Assist in material selection and creating mood boards if required.

• Visit project sites for measurements, design clarifications, and progress updates.

Qualifications and Skills:

• Diploma or degree in Interior Design, Architecture, or related field.

• Proficiency in drafting software such as AutoCAD, SketchUp, Revit, and other relevant tools.

• Strong understanding of interior design principles and space planning.

• Ability to interpret design concepts and translate them into technical drawings.

• Attention to detail with excellent organizational skills.

• Knowledge of building codes, safety standards, and materials.

• Good communication and teamwork abilities.

Preferred Experience:

• 1-3 years of experience in interior design drafting or a similar role.

• Familiarity with 3D rendering software like 3ds Max , lumion, I- structure etc

Responsibilities & Duties:

• Review project drawings, specifications, and design requirements, ensuring adherence to relevant codes and standards
• Assist in the checking of project documentation, including architectural reports, design reviews, and as-built drawings
• Coordinate with sub-contractors, third parties for the implementation of any design revision or modification for compliance to relevant code of practices
• Conduct regular site inspections to monitor construction progress, ensuring that all work is in compliance with approved architectural plans, specifications, and relevant building codes
• Review and approve architectural shop drawings, materials, and samples submitted by contractors to ensure they align with design intent and project standards
• Liaise with the Design Manager, Consultant Architect and C&S engineers, construction teams, and other disciplines to resolve any architectural or design-related issues during construction
• Provide architectural guidance and solutions to address on-site challenges, design changes, or unexpected conditions
• Participate in project meetings with the client, consultants, and contractors to discuss progress, address concerns, and provide updates on architectural elements
• Assist Design Manager in the review of construction drawings, architectural documentation
• Feedback to Design Manager on potential design risks and appropriate adjustments
• Address design implementation and challenges with other team members
• Ensure architectural decisions are aligned with overall project goals
• Provide input to improve design efficiency and cost-effectiveness
• Supervision of project to ensure adherence to specifications set by BCA
• Identify any non-conformity of works on site
• Work with clients, contractors, consultants, sub-contractors, and other team members on the design intent requirements and resolve any issues
• Perform all duties in accordance with CCCC policies, processes, systems, reporting, and procedure.

Requirement:

• Bachelor's or Master's degree in Architecture.
• Min 8 year of Architectural works experience, with 5 years supervision for MRT projects
• Strong knowledge of construction materials, methods, building services systems, and authorities’ requirements.
• Excellent communication and presentation skills.
• Ability to interpret and explain complex architectural drawings and specifications.

Task Management:

• Preliminary vessel concept work for tendering
• Prepare 2D & 3D drawings/models for construction
• Engineering system calculations to various classification society rules
• Preparation & review of production drawings for construction
• Follow approved company processes as defined in the Strategic Marine Business Management System
• Assist in the development of design office standards / procedures
• Able to take on project management tasks
• Ensure OHSE policies & guidelines are carried out

People Management:

• Provide technical and professional support to junior staff

Interpersonal Management:

• Liaise with Project Managers and Designers
• Liaise with class and flag societies
• Liaise with customers to meet contracted requirements
• Liaise with external design organisations
• Liaise with production departments to provide technical support

Information Management: (Will this person be handling paperwork e.g. reports, forms, invoices, drawings, documentation, etc? What will this involve?)

• Provide regular communications to the Design Manager
• Attend Design & Project meetings and conference calls
• Provide info on work accomplished for B.O.D. reports on monthly basis to the Design Manager
• Ensure proper filing and documentation of drawings, calculations & other project documents in the design server
• Maintain an accurate project design register
• Provide weekly timesheets to Accounts and Design Manager

Personal Management: (How will this person have to behave to be successful in this job e.g. Honest, Reliable Punctual?)

• Open, respectful & approachable
• Act with integrity and honesty
• Continue to develop skills and industry knowledge through a variety of means
• Ability to work unsupervised to meet deadlines
• Flexibility and ability to multi-task
• Ability to mentor and develop junior staff
• Passionate about boats and a desire to work on a range of vessel types