Total 14 job vacancies by A*star Research Entities

Job Description:

• Developing and optimizing thin film processes, such as Physical Vapour Deposition (PVD) and e-Beam Evaporation for Micro-Electro-Mechanical-Systems (MEMS), Wide-Band-Gap (WBG) and Photonics applications.
• Thin film property characterization and process issue troubleshooting.
• Develop film defect reduction and yield improvement strategies.
• Act as a subject matter expert and resource for colleagues in integration teams.
• Work with Fab team in establishing statistical process control for thin film module.
• Generate and present reports to both internal and external customers.

Job Requirements:

• Bachelors/Masters in Materials Science and Engineering, Physics, Electrical Engineering, or closely related fields are welcome to apply.
• 3+ years direct industry experience in PVD and evaporation is preferred.
• Good understanding of thin film deposition techniques, defect reduction methodologies, yield improvement and thin film property characterization is desired.
• Understanding of thin film tool hardware, especially PVD and evaporation, is advantageous.
• Knowledge and prior hands-on experience on basic process characterization techniques such as SEM/TEM, EDX, SIMS, FTIR, XPS, ellipsometry is advantageous.
• Good understanding of thin film deposition techniques, defect reduction methodologies, yield improvement and thin film property characterization is desired.
• Possess good interpersonal and oral/written communication skills, with ability to deliver clear and concise messages to both internal and external stakeholders.

As the Research Engineer (Equipment/Operations), you are directly involved in tool installation activities for semiconductor process tools. You would need to work proactively to coordinate with the contractor on the ground for the execution and take corrective and preventive actions of lessons learned, due diligently to prevent reoccurrence. You are responsible for performing utilities turn-on after installation is completed. You must perform the activities per ASTAR site procedure and safety policies to ensure all tool-install-related activities are completed, meeting safety, quality, schedule and budget requirements. You will also be required to perform other activities such as operations for the different semiconductor modules (Diffusion, Litho, Dry/Wet Etch, Thin Film, Implant, etc).

Responsibilities:

• Coordinate with all tool-install base contractors to execute equipment hookup for new tools, to meet the high-quality standards, dynamic schedule, and forecasted budget.
• Coordinate with the Project owner (NGTC/APM) to facilitate utility release as per the planned schedule and update tool release status timely
• Follow all safety and environmental procedures to ensure compliance with EHS-related regulations, risk assessment, safe work procedures, and permit-to-work system.
• Play an active role in safety, actively participating in safety discussions and safe work practices.
• Establish regular area walks to identify opportunities for improved safety, cleanliness, housekeeping and efficiency
• Establish regular, working interaction with peers as well as vendors in tool installation & facilitation, communicating clearly and respectfully all relevant information.
• Keep the reporting officer informed regarding the progress of assigned work and any abnormalities observed in your area.
• Demonstrate ability to understand drawing and highlighting discrepancies
• Follow area-specific procedures and documentation
• Prioritize work tasks to meet schedule and expectations, minimum guidance
• Perform tool tool-relativities and cleanroom systems troubleshooting during the hookup phase
• To perform equipment trouble-shooting of the equipments in NGTC when the need arises
• To perform utility-on after installation completion and to work closely with LCAM for complete closure
• To perform tests balancing of exhaust for new tools whenever necessary
• To perform measures for tool consumption during the hookup phase and to work closely with LCAM
• Use methods to organize, calculate, and display data accurately for utility and flowrate measurement
• Perform site activities in accordance to the Discipline

Requirements:

• Degree/Diploma in Mechanical/Electrical/Chemical engineering or equivalent
• Semiconductor experience (Equipment & Process)
• Facilities field or Wafer Fab Manufacturing equipment background will be an advantage.
• AutoCAD

As the Research Engineer (Equipment/Operations), you are directly involved in tool installation activities for semiconductor process tools. You would need to work proactively to coordinate with the contractor on the ground for the execution and take corrective and preventive actions of lessons learned, due diligently to prevent reoccurrence. You are responsible for performing utilities turn-on after installation is completed. You must perform the activities per ASTAR site procedure and safety policies to ensure all tool-install-related activities are completed, meeting safety, quality, schedule and budget requirements. You will also be required to perform other activities such as operations for the different semiconductor modules (Diffusion, Litho, Dry/Wet Etch, Thin Film, Implant, etc).

Responsibilities:

• Coordinate with all tool-install base contractors to execute equipment hookup for new tools, to meet the high-quality standards, dynamic schedule, and forecasted budget.
• Coordinate with the Project owner (NGTC/APM) to facilitate utility release as per the planned schedule and update tool release status timely
• Follow all safety and environmental procedures to ensure compliance with EHS-related regulations, risk assessment, safe work procedures, and permit-to-work system.
• Play an active role in safety, actively participating in safety discussions and safe work practices.
• Establish regular area walks to identify opportunities for improved safety, cleanliness, housekeeping and efficiency
• Establish regular, working interaction with peers as well as vendors in tool installation & facilitation, communicating clearly and respectfully all relevant information.
• Keep the reporting officer informed regarding the progress of assigned work and any abnormalities observed in your area.
• Demonstrate ability to understand drawing and highlighting discrepancies
• Follow area-specific procedures and documentation
• Prioritize work tasks to meet schedule and expectations, minimum guidance
• Perform tool tool-relativities and cleanroom systems troubleshooting during the hookup phase
• To perform equipment trouble-shooting of the equipments in NGTC when the need arises
• To perform utility-on after installation completion and to work closely with LCAM for complete closure
• To perform tests balancing of exhaust for new tools whenever necessary
• To perform measures for tool consumption during the hookup phase and to work closely with LCAM
• Use methods to organize, calculate, and display data accurately for utility and flowrate measurement
• Perform site activities in accordance to the Discipline

Requirements:

• Degree/Diploma in Mechanical/Electrical/Chemical engineering or equivalent
• Semiconductor experience (Equipment & Process)
• Facilities field or Wafer Fab Manufacturing equipment background will be an advantage.
• AutoCAD

Job Description:

• Actively working with cross functional stakeholders to plan and develop new lithography process
• Validate mask designs, reticle tape out and post tape out verifications
• Actively participate in internal and external technical discussions to overcome process related challenges and provide relevant solutions
• Perform process characterization, margin study to determine the process capability of new process platform
• Act as subject matter expert and resource for researchers and industry partners to enable process and/or product realization
• Publish process development outcomes and breakthroughs in research community
• Engage with relevant equipment makers/vendors and responsible for selecting and procuring research equipment
• Work with fab team in establishing SPC for newly developed processes

Job Requirements:

• Bachelors/Masters in Materials Science and Engineering, Physics, Electrical Engineering, or closely related fields are welcome to apply
• More than 5 years of relevant working experience in R&D and/or industry environment and broad exposure in handling 6”, 8” and/or 12” substrate covering nano to micron technology nodes, preferably in SiC/GaN/Photonics
• Proficient in Photolithography tools including Immersion/KrF/I-line Scanner/Stepper/Mask Aligner, knowledge in eBeam Lithography tool will be added advantage
• Hands-on experience in metrology including but not limited to CdSEM, Overlay, OCD, DRSEM, Microscope. Capable to create recipe to support various research requirements
• Knowledge in design and simulation (ProLith, OPC,etc), and reticle layouts (OAS,GDS) review and basic tape out process
• Equipped with Photolithography skill set including fundamental lithography theory, Photoresist characteristic and application, new process setup (swing curve, FEM, DoE, Statistic Root Cause Analysis and problem solving methodology, etc), optimization and margin improvement.
• Relevant hardware and application knowledge in Photolithography tools and metrology.
• Possess good interpersonal and oral/written communication skills, with ability to deliver clear and concise messages to both internal and external stakeholders.

Job Description:

• Developing and optimizing thin film processes, such as Physical Vapour Deposition (PVD) and e-Beam Evaporation for Micro-Electro-Mechanical-Systems (MEMS), Wide-Band-Gap (WBG) and Photonics applications.
• Thin film property characterization and process issue troubleshooting.
• Develop film defect reduction and yield improvement strategies.
• Act as a subject matter expert and resource for colleagues in integration teams.
• Work with Fab team in establishing statistical process control for thin film module.
• Generate and present reports to both internal and external customers.

Job Requirements:

• Bachelors/Masters in Materials Science and Engineering, Physics, Electrical Engineering, or closely related fields are welcome to apply.
• 3+ years direct industry experience in PVD and evaporation is preferred.
• Good understanding of thin film deposition techniques, defect reduction methodologies, yield improvement and thin film property characterization is desired.
• Understanding of thin film tool hardware, especially PVD and evaporation, is advantageous.
• Knowledge and prior hands-on experience on basic process characterization techniques such as SEM/TEM, EDX, SIMS, FTIR, XPS, ellipsometry is advantageous.
• Good understanding of thin film deposition techniques, defect reduction methodologies, yield improvement and thin film property characterization is desired.
• Possess good interpersonal and oral/written communication skills, with ability to deliver clear and concise messages to both internal and external stakeholders.

Job Description:

• Actively working with cross functional stakeholders to plan and develop new lithography process
• Validate mask designs, reticle tape out and post tape out verifications
• Actively participate in internal and external technical discussions to overcome process related challenges and provide relevant solutions
• Perform process characterization, margin study to determine the process capability of new process platform
• Act as subject matter expert and resource for researchers and industry partners to enable process and/or product realization
• Publish process development outcomes and breakthroughs in research community
• Engage with relevant equipment makers/vendors and responsible for selecting and procuring research equipment
• Work with fab team in establishing SPC for newly developed processes

Job Requirements:

• Bachelors/Masters in Materials Science and Engineering, Physics, Electrical Engineering, or closely related fields are welcome to apply
• More than 5 years of relevant working experience in R&D and/or industry environment and broad exposure in handling 6”, 8” and/or 12” substrate covering nano to micron technology nodes, preferably in SiC/GaN/Photonics
• Proficient in Photolithography tools including Immersion/KrF/I-line Scanner/Stepper/Mask Aligner, knowledge in eBeam Lithography tool will be added advantage
• Hands-on experience in metrology including but not limited to CdSEM, Overlay, OCD, DRSEM, Microscope. Capable to create recipe to support various research requirements
• Knowledge in design and simulation (ProLith, OPC,etc), and reticle layouts (OAS,GDS) review and basic tape out process
• Equipped with Photolithography skill set including fundamental lithography theory, Photoresist characteristic and application, new process setup (swing curve, FEM, DoE, Statistic Root Cause Analysis and problem solving methodology, etc), optimization and margin improvement.
• Relevant hardware and application knowledge in Photolithography tools and metrology.
• Possess good interpersonal and oral/written communication skills, with ability to deliver clear and concise messages to both internal and external stakeholders.

Job Summary:

DxD Hub is an end-to-end productisation partner, committed to transforming the MedTech landscape in Singapore through innovative solutions sourced from both local and regional partners. Our strengths are in cross-disciplinary product development particularly in molecular diagnostics, protein immune assays, and digital diagnostic technologies. We are seeking a skilled and experienced Mechanical Design Engineer to join our dynamic team. The successful candidate will take on the responsibility of leading a team in the design and development of mechanical systems. The candidate will work closely with cross-functional teams to lead projects, conducting feasibility studies and overseeing product development. They will also ensure that designs comply with both technical specifications and regulatory standards.

Job Roles and Responsibilities:

• Conceptualise, design, and develop mechanical components and mechanisms for medical devices.
• Responsible for the preparation and maintaining design documentation such as specifications, bill of materials, test protocols, test reports, etc.
• Lead a team to perform structural analysis, thermal analysis, and other relevant tests to validate and optimise designs.
• Responsible for feasibility tests to assess the viability and performance of proposed designs.
• Work closely with cross-functional teams, including teams in molecular diagnostics, protein immune assays, and digital diagnostic technologies as well as electrical engineers, software engineers, and project managers.
• Ensure compliance with DxD Hub Quality Management system, standards, and regulatory requirements such as FDA, ISO13485, etc.

Job Requirements:

• Master’s or bachelor’s degree in mechanical engineering, or related field.
• At least 5 years relevant experience in mechanical design engineering and completed one full product development cycle.
• Three years of experience or equivalent in close and collaborative work with design managers and product managers.
• Experiences in leading a mechanical design team is a plus.
• Proficient in CAD software, such as SolidWorks, AutoCAD, etc.
• Strong understanding of engineering principles, materials, and manufacturing processes.
• Excellent problem-solving and analytical skills.
• Effective communication skills and ability to work collaboratively in a team.
• Knowledge in quality, product verification test, QMS, and ISO13485 would be an advantage.
• Self-driven team player who can work in a fast-paced environment.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Job Description:

• Responsible for developing and optimizing ion-implantation and rapid thermal anneal (RTA) processes to support IME's various program requirements.
• Responsibilities include diagnosing malfunctions and using test equipment or software to test faulty hardware parts, applying knowledge of the functional operation of the Ion implanter and RTA equipment.
• Collaborates closely with vendors to optimize equipment performance and reduce tool downtime.
• Setup and execute design of experiments (DOEs) at various dose, energy, tilt, and twist levels, and evaluate experimental data to meet required process specifications.
• Responsible for analyzing test data related to implant-related defect formation, and quantifying and minimizing defects.
• Champion process window characterization and evaluation to drive quality and yield improvement.
• Closely collaborate with process integration teams to implement technology roadmaps, define process capability requirements, and address structural implications and constraints related to ion-implantation and RTA processes.
• Work with fab team in establishing statistical process control for ion-implantation and RTA processes.
• Generate and present reports to both internal and external customers.

Requirements:

• Bachelors/Masters in Materials Science and Engineering, Physics, Electrical Engineering, or closely related fields are welcome to apply.
• 3 years direct industry experience in ion-implantation, RTA and SiC MOSFET fabrication is preferred.
• Extensive proficiency in medium and high energy/current ion implantation, and RTA processes, including a comprehensive knowledge of equipment, equipment parts, and troubleshooting techniques to minimize equipment downtime.
• Good understanding of wide bandgap semiconductor materials and their corresponding dopant species.
• Expertise in ion channeling, ion bombardment, and their impact on the implant species profile.
• In-depth comprehension of defect formation and annihilation processes in the implanted region of semiconductors.
• Familiarity with essential device properties resulting from ion implantation and RTA processes.
• Understanding of the hardware of ion-implantation and RTA systems is advantageous.
• Knowledge and prior hands-on experience on basic process characterization techniques such as SEM/TEM, EDX, SIMS, Ellipsometry is advantageous.
• Possess good interpersonal and oral/written communication skills, with ability to deliver clear and concise messages to both internal and external stakeholders.

Job Responsibilities

• Develop and align strategies to economic and national agenda (e.g. DxD Hub 3.0 in RIE2030 strategy), including strengthening linkages with internal and external stakeholders (e.g. MOH, clinical clusters in setting up satellite programmes).
• Translate overarching DxD Hub’s strategies into an action plan, coordinating across public sector and internal stakeholders and entities to achieve Enterprise’s desired outcomes.
• Set, monitor and report performance and tracking indicators for DxD Hub in alignment with National Platforms Co-ordinating Office and A*STAR Innovation and Enterprise (I&E) division and its operating units and in partnership with finance for financial targets.
• Establish and maintain corporate branding and public awareness of DxD Hub.
• Perform Divisional reporting and communications functions with stakeholders within A*STAR, governing and advisory boards, as well as other public agencies in the ecosystem.
• Review internal operational processes for possible improvements, in alignment with Enterprise and A*STAR best practices.
• Build capabilities of service platforms & drive realization of business outcome.
• Hires, motivates, develops, and retains key talent.
• Develop and deliver accurate reports of operational metrics to the CEO. Deliver monthly operation reports.

Requirements:

• Bachelor’s degree, preferably in Science or Engineering.
• More than 6 years of relevant working experience. Experience in strategic and/or corporate planning would be an advantage.
• Possess strong strategic and analytical thinking skills.
• Able to identify and contextualise stakeholder issues and manage them appropriately.
• Good communication (written and verbal) and interpersonal skills. Able to work in a team and guide the team to achieve their tasks. Able to work outside of organizational boundaries to engage external stakeholders as necessary
• Able to deliver results under tight timelines. Pro-active, quality conscious and results oriented.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Job Description:

DxD Hub is an end-to-end productisation partner, committed to transforming the MedTech landscape in Singapore through innovative solutions sourced from both local and regional partners. Our strengths are in cross-disciplinary product development particularly in molecular diagnostics, protein immune assays, and digital diagnostic technologies.

We are seeking a Senior Engineer with system integration expertise with design oversight to join our team. As a vital member of our team, you will be involved in the design, development, and testing of medical devices, ensuring compliance with regulatory standards and industry best practices.

Your role will involve collaborating with cross-functional teams to create innovative solutions encompassing hardware, software and chemistry by conducting verification and validation activities, and providing technical support throughout the product lifecycle.

The ideal candidate will have a solid understanding of system integration principles, best practices in verification and validation testing, and knowledge of medical device regulations (such as ISO 13485).

Join our dynamic team and contribute to the development of cutting-edge medical devices that improve patient care and well-being.

Job Roles and Responsibilities:

• Develop high-level system architectures that meet user requirements while considering design feasibility.
• Ensure that all system components are compatible and can be integrated seamlessly.
• Design and implement integration strategies and validate the functions as intended while adhering to design principles.
• Lead collaborative teams for the design, implementation, and validation while is capable to perform hand-on testing independently if required to complete engineering or verification studies.
• Lead creating innovative solutions that align with both technical specification and user needs for medical products.
• Coordinate between design, engineering, assay, project manager, and other disciplines to ensure cohesive product development.
• Author or oversee the writing of protocols and reports.
• Foster collaboration among team members to address challenges from both a technical and design perspective.
• Creating and maintaining technical documentation, including design specifications, test protocols, and reports, ensuring compliance with regulatory requirements such as ISO 13485.

Job Requirements:

• Experience in system integration and innovation.
• Bachelor’s degree in Engineering, Design or equivalent engineering or science background.
• Comfortable with navigating uncertain situations without clear guideline.
• Adaptability to changing work conditions and project requirements.
• 5-10 years’ experience in cross-functional product development roles and completed one full product development cycle.
• Track record in working effectively with diverse teams, including engineering, design, and marketing.
• Strong interpersonal skills to facilitate communication between technical and non-technical stakeholders and ability to summarize and communicate complex problems in simple terms.
• Strong analytical skills to troubleshoot integration issues while considering design implications.
• Able to break down complex system in simple steps and identify interfaces between modules and generate system diagrams, workflows and reports.
• Curious and proactive approach to gather information necessary for decision-making.
• Knowledge of statistical tools for data analysis such as (Python/Matlab/Origin/LabView) will be a strong advantage.
• Experience with design software. Experience with CFD simulation software such as ANSYS is advantageous.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

A*STAR Infectious Diseases Labs (A*STAR ID Labs) is seeking for a Research Officer to join us in our mission to be a leading centre of infectious diseases research. A*STAR ID Labs aims to develop a cohesive A*STAR response to drive and deliver translational infectious diseases research to better health and economic outcomes.

The candidate will be joining the Antimicrobial Chemical Biology Lab, a newly established group in A*STAR ID Labs focusing on the development of synthetic antimicrobial compounds for potential therapeutic applications. Scholarship opportunities will be available for those interested in pursuing further education at the master’s or PhD level.

Research projects will encompass various tasks such as:

• Chemical synthesis
• In vitro activity testing
• Understanding mechanisms of action
• In vivo efficacy evaluation.
• Support the team in lab operation
• Upkeep of consumables
• Safety oversight
• Labware procurement
• Documenting experimental procedures and results.

Job Requirements:

• Bachelor’s degree in microbiology, biomedical science, chemistry, chemical engineering, bioengineering, or related field
• Familiarity with basic microbiology (e.g., bacteria/fungi culture, agar plating, PCR) and chemistry (e.g., reaction setup, column purification, HPLC) lab techniques, programming, and/or common graphics software (e.g., Photoshop) will be advantageous.
• Highly motivated and passionate about scientific research
• Good spoken and written communication skills
• Team player
• Receptive and detail-orientated

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Job Description:

• Responsible for developing and optimizing ion-implantation and rapid thermal anneal (RTA) processes to support IME's various program requirements.
• Responsibilities include diagnosing malfunctions and using test equipment or software to test faulty hardware parts, applying knowledge of the functional operation of the Ion implanter and RTA equipment.
• Collaborates closely with vendors to optimize equipment performance and reduce tool downtime.
• Setup and execute design of experiments (DOEs) at various dose, energy, tilt, and twist levels, and evaluate experimental data to meet required process specifications.
• Responsible for analyzing test data related to implant-related defect formation, and quantifying and minimizing defects.
• Champion process window characterization and evaluation to drive quality and yield improvement.
• Closely collaborate with process integration teams to implement technology roadmaps, define process capability requirements, and address structural implications and constraints related to ion-implantation and RTA processes.
• Work with fab team in establishing statistical process control for ion-implantation and RTA processes.
• Generate and present reports to both internal and external customers.

Requirements:

• Bachelors/Masters in Materials Science and Engineering, Physics, Electrical Engineering, or closely related fields are welcome to apply.
• 3 years direct industry experience in ion-implantation, RTA and SiC MOSFET fabrication is preferred.
• Extensive proficiency in medium and high energy/current ion implantation, and RTA processes, including a comprehensive knowledge of equipment, equipment parts, and troubleshooting techniques to minimize equipment downtime.
• Good understanding of wide bandgap semiconductor materials and their corresponding dopant species.
• Expertise in ion channeling, ion bombardment, and their impact on the implant species profile.
• In-depth comprehension of defect formation and annihilation processes in the implanted region of semiconductors.
• Familiarity with essential device properties resulting from ion implantation and RTA processes.
• Understanding of the hardware of ion-implantation and RTA systems is advantageous.
• Knowledge and prior hands-on experience on basic process characterization techniques such as SEM/TEM, EDX, SIMS, Ellipsometry is advantageous.
• Possess good interpersonal and oral/written communication skills, with ability to deliver clear and concise messages to both internal and external stakeholders.

Scientist for Advanced Photonics (Photonic device and PDK development)

As part of IME’s Photonics & Sensors Department, the candidate will work on photonic device and PDK library development. This will include photonic device simulation, fabrication, characterization, optimization, and PDK development. You will work closely with an excellent multidisciplinary team working on photonics, electronics, semiconductor processes, integration, and fab operation.

Responsibilities:

• Design of passive and active photonic devices based on various 8-inch and-12 inch material platforms.
• Take the lead in designing integration flows to manufacture the designed devices.
• Develop automated electro-optic characterization systems for the designed and fabricated photonic devices.
• Characterize photonic devices and perform design optimization to meet the required device performance.
• Develop PDK for optimized photonic devices.
• Prepare presentations and papers for internal meetings, conferences and journals.
• Collaborate with the project team to ensure quality and on-time delivery for various projects. You will get a chance to be exposed to both industrial and academic projects.
• Performs other duties as assigned.

Qualifications:

• PhD in Integrated Photonics, Microelectronics, Opto-electronics, Physics or equivalent.
• Experience in one or more topics listed below is strongly preferred: Si photonics, SiN photonics, compound semiconductor photonics, photonic computing, quantum computing, LiDar, optical switch array.
• Strong hands-on experience in photonic device development or photonics integration.
• Strong hands-on experience in photonic simulation using various electrical / photonics design software.
• Strong communication, industry awareness, and problem-solving skills.
• Strong self-motivation and interest in the next-generation photonics technology development.

Scientist for Advanced Photonics (Photonic device and PDK development)

As part of IME’s Photonics & Sensors Department, the candidate will work on photonic device and PDK library development. This will include photonic device simulation, fabrication, characterization, optimization, and PDK development. You will work closely with an excellent multidisciplinary team working on photonics, electronics, semiconductor processes, integration, and fab operation.

Responsibilities:

• Design of passive and active photonic devices based on various 8-inch and-12 inch material platforms.
• Take the lead in designing integration flows to manufacture the designed devices.
• Develop automated electro-optic characterization systems for the designed and fabricated photonic devices.
• Characterize photonic devices and perform design optimization to meet the required device performance.
• Develop PDK for optimized photonic devices.
• Prepare presentations and papers for internal meetings, conferences and journals.
• Collaborate with the project team to ensure quality and on-time delivery for various projects. You will get a chance to be exposed to both industrial and academic projects.
• Performs other duties as assigned.

Qualifications:

• PhD in Integrated Photonics, Microelectronics, Opto-electronics, Physics or equivalent.
• Experience in one or more topics listed below is strongly preferred: Si photonics, SiN photonics, compound semiconductor photonics, photonic computing, quantum computing, LiDar, optical switch array.
• Strong hands-on experience in photonic device development or photonics integration.
• Strong hands-on experience in photonic simulation using various electrical / photonics design software.
• Strong communication, industry awareness, and problem-solving skills.
• Strong self-motivation and interest in the next-generation photonics technology development.