Total 16 Transportation / Logistics job vacancies in Portland, Oregon

Major duties include but are not limited to:

This staff member is employed in the Nutrition & Food Service Department. This position combines the duties of a Motor Vehicle Operator with those of a Food Service Worker. In addition to performing the tasks of delivering food to various locations throughout campus, this position also performs various food production and cleaning tasks. The incumbent works under the direction of the Food Service Worker Supervisors.

Motor Vehicle Operator: This staff member is employed in the Nutrition & Food Service Department. This position combines the duties of a Motor Vehicle Operator with those of a Food Service Worker. In addition to performing the tasks of delivering food to various locations throughout campus, this position also performs various food production and cleaning tasks. The incumbent works under the direction of the Food Service Worker Supervisors.

The Motor Vehicle Operator is responsible for performing maintenance, such as checking fluid levels and air pressure in tires, re-fueling and cleaning of the vehicle. A two-way radio to may be utilized to receive and transmit messages. The incumbent is also responsible for completing and maintaining competencies on the use/maintenance of the vehicle and lift gate.

Food Service Worker: The incumbent is expected to do tasks with many steps or a sequence of tasks in the food production and food service areas. These include preparation and portioning of foods, mixing liquids to prescribed thickness, following restricted diet guidelines in the assembly of meals and nourishments, tray delivery, supplying and rotating stock, dishwashing and general cleaning.

Although established procedures are followed, continuous attention is required in the application of diet restrictions, proper food handling techniques, use of chemicals and the safe operation of food service equipment.

The Food Service Worker prepares uncooked items such as sandwiches, salads, spreads and salad dressings. Beverages are also prepared according to diet guidelines for therapeutic consistency. In addition, this position provides assistance to cooks by weighing, measuring and assembling ingredients according to standardized recipes. The incumbent places correct food items on hospital trays by accurately reading menus and diet cards within allotted time frames. This position is responsible for the assembly and disassembly of tray line serving stations, including preparation of equipment for hot and cold items and sanitizing of surfaces when meal service is completed. Provides assistance to cooks in food preparation area by weighing, measuring and assembling ingredients according to standardized recipes.

The Food Service worker also interacts with Veterans, delivering foods to inpatient wards and directly into patient rooms. Timely service is required to maintain food quality and temperature. The incumbent observes food safety, sanitation, and HIPPA guidelines when transporting food items. This employee properly identifies patients utilizing 2 identifiers prior to distributing trays.

Work Schedule: Tuesday - Saturday 10:00 am - 6:30 pm.
Position Description Title/PD#: Motor Vehicle Operator (Food Service Worker)/PD30482-A
Critical Skills Incentive (CSI): Not Approved.
Relocation/Recruitment Incentives: Not Authorized.

Major duties may include but are not limited to:

• Distribute and balance the workload among employees in accordance with established workflow or job specialization, assure timely accomplishment of the assigned workload, and assure that each employee has enough work to keep busy.
• Keep in touch with the status and progress of work, and make day-to-day adjustments in accordance with established priorities, obtaining assistance from the supervisor on problems that may arise, such as backlogs which cannot be disposed of promptly.
• Instruct employees in specific tasks and job techniques and make available written instructions, reference materials and supplies.
• Maintain a current knowledge and answer questions of other employees on procedures, policies, directives, etc. and obtain needed information or decisions from supervisor on problems that come up.
• Ensure the Beneficiary Travel office staff provide transportation at Government expense to beneficiaries and their attendants traveling to and from VA facilities and other places for examination, treatment, or care.
• Share the responsibility with the Supervisory Transportation Assistant for all beneficiary travel duties to include determining method of payment of authorized and unauthorized ambulance claims submitted for consideration.
• Responsible for the processing of Veteran claims reimbursements utilizing BTSSS which provides a more veteran-focused experience for beneficiary travel reimbursements, allowing claimants to submit and track travel claims at their convenience.
• Process Veteran claims reimbursements via paper submission and work towards increase efficiency and accuracy in claims processing, provide letters to noncompliant claims that include rejections codes.
• Reviews requests for reimbursement of travel costs for assuring compliance with regulations and procedures, completeness, accuracy, internal consistency, and agreement with basic authorization.
• The employee will have regular and recurring contact with personnel external to the agency for the obtainment of services, sharing of information and authorization, clarification, or denial of payment.
• Works closely with the Supervisor, keeping channels of communication open on a daily basis.
• Performs other related duties as assigned.

As a AIRCRAFT MECHANIC, WG-8852-8/10/12, this position is located in the Logistics function of an ARNG Army Aviation Support Facility (AASF). The AASF provides Aviation Unit Maintenance (AVUM), Aviation Intermediate Maintenance (AVIM), and aviation maintenance training for supported units. The purpose of this position is to act as the Aircraft Mechanic (Crew Chief) with responsibility for managing the operational readiness of one or more aircraft, and proficiency training of supported aviation unit personnel. Responsibilities include detailed technical oversight of individual aircraft's level of mission capabilities and projection of maintenance requirements to maintain individual aircraft operational readiness.

(1) Manages, monitors or performs overall maintenance, servicing, inspections and documentation for one or more highly technical, high performance military aircraft. Performs work in complex conditions under time and/or mission constraints to include all weather and night operations. Works with, coordinates and oversees the work of lower graded aircraft mechanics and certifies the work of journey level workers in other trades working on the assigned aircraft. Performs damage assessments and repairs. Participates in mission preparation and recovery operations. Oversees installation of equipment for special missions. Expedites aircraft operations to include concurrent servicing, refueling, and/or reconfiguration of equipment for changes in operational missions. Performs preflight, thru flight, and post-flight inspections and scheduled or unscheduled maintenance. Serves as the technical authority to identify and advise on requirements for airframe, mechanical, electrical/environmental, avionics, engine, and pneudraulic repairs on assigned aircraft. Works closely with maintenance supervisor(s) and production control personnel to report and maintain current aircraft status. Requests maintenance services exceeding AASF capabilities or time constraints.

(2) Ensures Unit Level Logistics-Aviation (ULLS-A) and other aircraft documentation accurately reflects status and airworthiness of assigned aircraft. Provides technical guidance and assistance to flight crews regarding observed discrepancies, experienced in-flight characteristics and system malfunctions. Performs or assists in aircrew debriefing.

(3) Clears Red X status symbols on aircraft forms for work performed by others. Performs in-process and final inspection of others' work on assigned aircraft and components and certifies by signature adherence to work procedures and quality standards established by applicable publications. Participates in Maintenance Test Flights as a crewmember or Technical Observer (TO), as required. May participate in operational flights as a crewmember or Flight Engineer. Makes decisions on a wide range of matters to ensure assigned aircraft is in the highest state of readiness and that maintenance performed is in accordance with the highest standards of safety, quality and technical compliance.

(4) Plans, develops and conducts proficiency training during the technician work week to a multi-faceted workforce comprised of Full Time Support (FTS) and supported unit personnel. Sessions are designed to provide training in techniques of repair and maintenance of aircraft and related equipment. Conducts and certifies proficiency of trainees for additional or increased responsibilities. Evaluates training by observation of performed tasks. Continuously assesses skill level and proficiency of assigned personnel.

(5) Prepares for and participates in various types of readiness evaluations, inspections, mobilization and support exercises. Performs such additional duties as structural fire fighting, aircraft fire/crash/rescue duty, security guard, snow removal, munitions loading and handling, maintenance of facilities and equipment or serves as a member of teams to cope with natural disasters or civil emergencies. Travels in military aircraft and drives/operates military vehicles/equipment. Participates in various periods of temporary duty away from the place of assignment, as required.

(6) Complies with safety, fire, security, environmental, and housekeeping regulations. Ensures material and equipment are properly and safely maintained and protected.

(7) Performs other duties as assigned.

*The above description only mentions a limited amount of the position's official duties. For a full comprehensive document that covers all the duties of the position, please contact one of the Recruitment Specialist at the bottom of the announcement.

The duties of this position include, but are not limited to:

• Ability to interact with individuals of varying backgrounds to assess the needs of the department.
• Ability to interpret and apply sterile processing/infection prevention regulations and policies.
• Ability to evaluate new products and equipment.
• Ability to initiate and lead interdisciplinary groups in carrying out sterile processing functions.
• Ability to instruct staff on the correct procedures and protocols for completing assignments within the electronic instrument tracking system.
• Skill in communicating with staff to ensure compliance with written directives, rules, and regulations.
• Skill in interpersonal relationships in dealing with employees, team leaders, and managers.
• Ability to lead individuals and manage priorities.
• Assigns work to subordinates based on priorities in absence of the supervisors or leads, selective consideration of the difficulty and requirements of assignments, staff designation as competent to complete the task, and the capability of the employee.
• Participates in Interview Panels and makes recommendations regarding hiring decisions.
• Identifies developmental and training needs of employees, providing for and arranging for needed development and training with the electronic instrument tracking system.
• Establishes guidelines and performance expectations for staff using the electronic instrument tracking system, which are clearly communicated through the formal employee performance management system.
• Observes workers' performance, demonstrates, and conducts work performance critiques. Provides informal feedback and evaluates employee performance with using the electronic instrument tracking system.
• Provides training to subordinates to fully comply with provisions of safety regulations.
• Communicates operational needs to direct Supervisor based upon findings, observations, or problems presented by subordinate technicians.
• Comprehensive responsibility for maintaining the electronic instrument tracking system to provide patient care in a safe and effective manner within the medical facility and, more broadly, within VISN 20 as they are related by shared databases and common technology.
• Advises the Chief/ Assistant Chief of problems in the organization's activities and provides input to the Chief/ Assistant Chief that may lead to disciplinary actions, such as counseling and formal disciplinary action, within the framework of progressive discipline; recommendation may include termination, especially separation during the probationary period.
• Directly oversees the work of employees, orients new employees to their duties, validates competencies of employees, identifies equipment requirements, and recommends methods to improve the quality and productivity of the service.

The duties of this position include, but are not limited to:

• Ability to interact with individuals of varying backgrounds to assess the needs of the department.
• Ability to interpret and apply sterile processing/infection prevention regulations and policies.
• Ability to evaluate new products and equipment.
• Ability to initiate and lead interdisciplinary groups in carrying out sterile processing functions.
• Ability to instruct staff on the correct procedures and protocols for completing assignments within the electronic instrument tracking system.
• Skill in communicating with staff to ensure compliance with written directives, rules, and regulations.
• Skill in interpersonal relationships in dealing with employees, team leaders, and managers.
• Ability to lead individuals and manage priorities.
• Assigns work to subordinates based on priorities in absence of the supervisors or leads, selective consideration of the difficulty and requirements of assignments, staff designation as competent to complete the task, and the capability of the employee.
• Participates in Interview Panels and makes recommendations regarding hiring decisions.
• Identifies developmental and training needs of employees, providing for and arranging for needed development and training with the electronic instrument tracking system.
• Establishes guidelines and performance expectations for staff using the electronic instrument tracking system, which are clearly communicated through the formal employee performance management system.
• Observes workers' performance, demonstrates, and conducts work performance critiques. Provides informal feedback and evaluates employee performance with using the electronic instrument tracking system.
• Provides training to subordinates to fully comply with provisions of safety regulations.
• Communicates operational needs to direct Supervisor based upon findings, observations, or problems presented by subordinate technicians.
• Comprehensive responsibility for maintaining the electronic instrument tracking system to provide patient care in a safe and effective manner within the medical facility and, more broadly, within VISN 20 as they are related by shared databases and common technology.
• Advises the Chief/ Assistant Chief of problems in the organization's activities and provides input to the Chief/ Assistant Chief that may lead to disciplinary actions, such as counseling and formal disciplinary action, within the framework of progressive discipline; recommendation may include termination, especially separation during the probationary period.
• Directly oversees the work of employees, orients new employees to their duties, validates competencies of employees, identifies equipment requirements, and recommends methods to improve the quality and productivity of the service.

The Medical Supply Technician (Sterile Processing) is knowledgeable of processes related to Reusable Medical Equipment (RME) and Standard Operating Procedures (SOPs) for the processes and procedures for cleaning, disinfection, sterilization and preparation of RME. Duties include but are not limited to the following:

• Receives contaminated critical and semi-critical RME in the decontamination area and may receive noncritical equipment in the decontamination area as well.
• Disassembles the RME and determines the correct cleaning method, such as but not limited to ultrasonic cleaners, mechanical washers, cart washers and chemical cleaning/decontamination agents, as determined by manufacturer instructions.
• Inspects, assembles and determines the correct method and packaging for sterilization such as but not limited to steam, Sterrad, Steris, ETO, and high-level disinfecting scope re-processors.
• Performs and documents daily operational checks and records for all sterilization equipment.

The Medical Supply Technician (Sterile Processing) is knowledgeable of processes related to Reusable Medical Equipment (RME) and Standard Operating Procedures (SOPs) for the processes and procedures for cleaning, disinfection, sterilization and preparation of RME. Duties include but are not limited to the following:

• Receives contaminated critical and semi-critical RME in the decontamination area and may receive noncritical equipment in the decontamination area as well.
• Disassembles the RME and determines the correct cleaning method, such as but not limited to ultrasonic cleaners, mechanical washers, cart washers and chemical cleaning/decontamination agents, as determined by manufacturer instructions.
• Inspects, assembles and determines the correct method and packaging for sterilization such as but not limited to steam, Sterrad, Steris, ETO, and high-level disinfecting scope re-processors.
• Performs and documents daily operational checks and records for all sterilization equipment.

The principal workload responsibility of this position is inspection, maintenance, repair, servicing, modification, adjustment, and calibration of the following electrical and mechanical systems associated with assigned aids to air navigation: (1)engine-driven standby power generation equipment, (2)electrical systems, (3)air-conditioning, heating, and ventilation systems, and (4) communications and control cables; and all other physical plant and structures workload such as: (1) antenna towers and poles, (2)buildings and structures, (3)roads and grounds, and (4) utilities (sewerage and water).

Typical duties include:

Working from building plans, blueprints, wiring diagrams, engineering drawings, and electrical maintenance and repair manuals to plan and lay out the routing, placement type, size, gauge, balance, load, continuity, and safe operation of electrical lines, circuits, systems, equipment and controls. Determines and places distribution panels, boxes, fittings, and connections and install wiring, couplings, conduit, relays, fixtures, transformers and other electrical devices including electrical service entrances.

Installing and repairing systems used to condition the air for different kinds of structures such as warehouses, ships, hangars, hospitals, submarines, and large office buildings and complexes, including those with areas that have special requirements such as communication centers, electronic data processing centers, operating rooms, laboratories, clean rooms, and other areas with sensitive equipment. Systems use a variety of methods of air conditioning such as mechanical compression, vapor compression, absorption, and steam jet or air cycle.

Sets up and operates a wide variety of wood working machines and tools. Assemble items with a variety of joining techniques such as miters, rabbets, dados, biscuit, and mortise and tenon, and use glues and adhesives to secure wood pieces, veneers, and counter tops. Use wood, metal and various composite materials when installing or repairing interior partitions, flooring, panels, suspended ceilings, counter tops, and moldings. Interprets drawings, blueprints, and specifications independently, and determines the layout and work sequences and types of lumber or special related materials. Plans and carries out projects from initial layout to completion. Responsible for accuracy, spacing, fit, and structural soundness and finished appearance, which are essential.

The supervisor checks overall work to see that it meets accepted standards and is completed in a timely manner. Incumbent may be required to do a moderate amount of travel.

The principal workload responsibility of this position is inspection, maintenance, repair, servicing, modification, adjustment, and calibration of the following electrical and mechanical systems associated with assigned aids to air navigation: (1)engine-driven standby power generation equipment, (2)electrical systems, (3)air-conditioning, heating, and ventilation systems, and (4) communications and control cables; and all other physical plant and structures workload such as: (1) antenna towers and poles, (2)buildings and structures, (3)roads and grounds, and (4) utilities (sewerage and water).

Typical duties include:

Working from building plans, blueprints, wiring diagrams, engineering drawings, and electrical maintenance and repair manuals to plan and lay out the routing, placement type, size, gauge, balance, load, continuity, and safe operation of electrical lines, circuits, systems, equipment and controls. Determines and places distribution panels, boxes, fittings, and connections and install wiring, couplings, conduit, relays, fixtures, transformers and other electrical devices including electrical service entrances.

Installing and repairing systems used to condition the air for different kinds of structures such as warehouses, ships, hangars, hospitals, submarines, and large office buildings and complexes, including those with areas that have special requirements such as communication centers, electronic data processing centers, operating rooms, laboratories, clean rooms, and other areas with sensitive equipment. Systems use a variety of methods of air conditioning such as mechanical compression, vapor compression, absorption, and steam jet or air cycle.

Sets up and operates a wide variety of wood working machines and tools. Assemble items with a variety of joining techniques such as miters, rabbets, dados, biscuit, and mortise and tenon, and use glues and adhesives to secure wood pieces, veneers, and counter tops. Use wood, metal and various composite materials when installing or repairing interior partitions, flooring, panels, suspended ceilings, counter tops, and moldings. Interprets drawings, blueprints, and specifications independently, and determines the layout and work sequences and types of lumber or special related materials. Plans and carries out projects from initial layout to completion. Responsible for accuracy, spacing, fit, and structural soundness and finished appearance, which are essential.

The supervisor checks overall work to see that it meets accepted standards and is completed in a timely manner. Incumbent may be required to do a moderate amount of travel.

Click the airport name below for more information.

Salary Information: The salary range for Portland, ME (PWM - Portland International Jetport) is $48,639 to $62,394 or $23.31 to $29.9 per hour and includes locality pay of 31.97%.

This Transportation Security Officer position is located in Transportation Security Administration, Department of Homeland Security (DHS). As a Transportation Security Officer (TSOs) within Security Operations (SO), you will provide security and protection of air travelers, airports and aircraft in a courteous and professional manner. Duties may include but are not limited to:

• Operating various screening equipment and technology to identify dangerous objects in baggage, cargo and on passengers, and preventing those objects from being transported onto aircraft.
• Performing searches and screening, which may include physical interaction with passengers (e.g., pat-downs, search of property, etc.), conducting bag searches and lifting/carrying bags, bins, and property weighing up to 50lbs.
• Controlling terminal entry and exit points.
• Interacting with the public, giving directions and responding to inquiries.
• Maintaining focus and awareness while working in a stressful environment which includes noise from alarms, machinery and people, crowd distractions, time pressure, and disruptive and angry passengers, in order to preserve the professional ability to identify and locate potentially life threatening or mass destruction devices, and to make effective decisions in both crisis and routine situations.
• Engaging in continuous development of critical thinking skills, necessary to mitigate actual and potential security threats, by identifying, evaluating, and applying appropriate situational options and approaches. This may include application of risk-based security screening protocols that vary based on program requirements.
• Retaining and implementing knowledge of all applicable Standard Operating Procedures, demonstrating responsible and dependable behavior, and is open to change and adapts to new information or unexpected obstacles.

SSC Coordinator performs work of broad scope and complexity with a high degree of independence. Provides the highest organizational level of technical support associated with analyzing, designing, developing, installing, repairing, fabricating, maintaining, modifying or evaluating the most complex systems for which the FAA is responsible.

Incumbent is recognized as the technical expert on legacy and newly developed systems within a large facility or multiple facilities over a large geographical area. Work requires maintaining technical expertise on complex systems and/or emerging technology, systems interrelationships and management of the NAS.

Responsibilities include the integration, restoration, testing and evaluation of new advanced service or service components, hardware/software systems and processes. Performs a variety of functions directly relating to the operation of the NAS. Serves as the principal technical specialist, project manager, resolving unique technical problems without managerial intervention, providing coordination and suggesting solutions.

Works within established policies and procedures to select the most effective and efficient approach or to develop new solutions. Carries out work in accordance with overall plans and objectives of the organization, resolving problems as they arise and making adjustments as necessary to deal with unanticipated situations and organizational needs. Responsible for evaluating diagnostic data from multiple systems that are integrated to support a network of services or service products. Can be called upon to assist w/repair and/or restore service or systems, providing guidance on availability of backup systems and to upward report the status of critical events.

Evaluation of this data is used for correcting deficiencies on Contractor Acceptance Inspection (CAI) or Joint Acceptance Inspection (JAI), FPIP, FSEP, Redline Drawings, Peabody and DMT reports dealing with LCMs. LADs, LEMs and resolving event based certification issues necessary for the timely restoration of equipment, systems/services with the NAS. Monitors other employees as a project or team leader.

Responsible for all aspects of SSC projects from initial planning, drawing and specifications review, implementation, JAI, and disposition of assets. Acts as SSC point of contact for all projects completed locally or by outside contractors.

Identifies requirements to accomplish projects and tracks the use of project resources. Provides training, mentoring, guidance and advice to FAA employees, contractors, and other organizations as needed. Uses technical expertise and understanding of user and stakeholder needs to prioritize SSC workload. Integrates Operational Risk Management (ORM) into all planned activities ensuring all customers and users are included in implementation and planning.

Fully understands and utilizes proper Personal Protective Equipment (PPE) and personal safety practices when engaged in all restoration/maintenance activities helping to set the example of safe work practices.

Position may be second level support for NAS systems, District, or Service Area providing broad program expertise. Contacts are internal and external to FAA. Collaborates with system users, planner, engineers for acceptance of new/modified systems.

Develops White Papers for the recommendation of enhancing efficiency of the systems by modification and application of existing or emerging technology.

Position requires emphasis on customer service and organizational skills and a clear understanding of FAA orders and how the orders apply to their position. Utilizes software such as Excel, Power Point and Word.

Receives general program assignments from a supervisor or higher-level manager. Work is reviewed for compliance with established policies and sound technical programmatic judgement.

Performs other duties as assigned.

Must possess a valid driver's license.

As a SUPPLY TECHNICIAN (TITLE 32), GS-2005-7, this position is located in the Aviation Materiel Management Section of an Army Aviation Support Facility (AASF). Its purpose is to provide services in support of inventory control, storage and distribution, cataloging or supply identification systems, property utilization, or other related supply activities including those associated with automated or manual supply accounting systems. Manages aviation materials and resource tracking (i.e. Depot Level Repairable (DLR)/Class 9 (CLIX) funds and all other appropriate air and ground budgets), Test Measurement & Diagnostic Equipment (TMDE)/tools management, and Hazardous Material Management.

(1) Responsible for all phases of DLR and CLIX repair/repairable items procurement and returns program. Forecasts, justifies, prepares, submits, and administers the annual DLR budget request. Responsible to acquire needed DLR and CLIX repair parts. Verifies availability and orders DLR parts as needed. Determines proper fund coding, prepares requisitions and forwards to source of supply. Insures part availability, receives part, stores, prepares Material Release Order (MRO), and forwards part to maintenance shops. Recovers damaged/unserviceable part, initiates turn-in procedure, prepares for shipment, packages and ships to depot, Aviation Classification Repair Army Depot (AVCRAD), or other appropriate activity. Maintains Document Control Register and ship-out log. Verifies that appropriate activity has received returned part. Reviews budget reports to insure returned funds are properly credited to DLR account. Incumbent establishes coordination and networking with other civilian and military agencies, for the purpose of acquiring required items and supplies. Those agencies include AVCRAD, Aviation Missile Command (AMCOM), Item Managers, civilian contract vendors, etc.

(2) Assists/performs the Property Book operations in the area of inventory and storage management, and equipment coordination. Ensures the property book sections periodically perform a visual inventory of all items. Maintains property book accountability utilizing an automated or manual supply accounting system. Establishes hand receipt files and maintains accountability by the use of hand receipt listings. Assures that all authorized property is on hand or has been requisitioned. Coordinates the assignment and transfer of inventory. Schedules, directs and conducts periodic inspections, to insure stock items are serviceable, properly stored, accounted for and maintained.

(3) Analyzes supply transactions or provides customer service for urgent critical shortage items and items requiring special handling when established procedures are not applicable. Codes and classifies requisitions, shipping orders, and other documents; extracts requests to other sources of supply or refers them to inventory control point when stock is unavailable or cannot be shipped.

(4) Within funding limitations determines stock replenishment levels for centrally controlled items. Assures that supplies and monies are not wasted through excess accumulation.

(5) Establishes procedures for management of calibration, testing of TMDE, and monitors tool room operations, to include accounting for, issuing and replacing tools.

(6) May oversee subordinates, when organization and workload does not support a full time supervisor, that are performing material and resource tracking (i.e., DLR, CLIX, and related budgets), special TDME/tool transactions and hazardous material accountability.

(7) Performs other duties as assigned.

As a SUPPLY TECHNICIAN, GS-2005-7, this position is located in the Army or Air National Guard. Its purpose is to provide storage and distribution, cataloging or supply identification systems, property utilization, or other related supply activities including those associated with automated or manual supply accounting systems.

(1) Performs routine and non-routine material coordination duties for special programs, maintenance, or production shops.

(2) Responsible for local management of decentralized and decontrolled items which requires technical intervention to assure effective supply support and economy. Items are less stable or standardized and do not lend themselves to routine control through the use of the computer and variable supply level formulas. Plans requirements, both quantitative and monetary, to satisfy customer needs. Authorizes procurement and is responsible for funds management.

(3) Responsible for limited aspects of storage management. May develop and install local procedures and techniques to achieve and maintain smooth, effective, and coordination storage operations.

(4) Performs other duties as assigned.

*The above description only mentions a limited amount of the position's official duties. For a full comprehensive document that covers all the duties of the position, please contact one of the Recruitment Specialist at the bottom of the announcement.