Total 349 Senior Executive level Science / R&D / Research job vacancies in New Delhi

As the Research Engineer (Equipment/Operations), you are directly involved in tool installation activities for semiconductor process tools. You would need to work proactively to coordinate with the contractor on the ground for the execution and take corrective and preventive actions of lessons learned, due diligently to prevent reoccurrence. You are responsible for performing utilities turn-on after installation is completed. You must perform the activities per ASTAR site procedure and safety policies to ensure all tool-install-related activities are completed, meeting safety, quality, schedule and budget requirements. You will also be required to perform other activities such as operations for the different semiconductor modules (Diffusion, Litho, Dry/Wet Etch, Thin Film, Implant, etc).

Responsibilities:

• Coordinate with all tool-install base contractors to execute equipment hookup for new tools, to meet the high-quality standards, dynamic schedule, and forecasted budget.
• Coordinate with the Project owner (NGTC/APM) to facilitate utility release as per the planned schedule and update tool release status timely
• Follow all safety and environmental procedures to ensure compliance with EHS-related regulations, risk assessment, safe work procedures, and permit-to-work system.
• Play an active role in safety, actively participating in safety discussions and safe work practices.
• Establish regular area walks to identify opportunities for improved safety, cleanliness, housekeeping and efficiency
• Establish regular, working interaction with peers as well as vendors in tool installation & facilitation, communicating clearly and respectfully all relevant information.
• Keep the reporting officer informed regarding the progress of assigned work and any abnormalities observed in your area.
• Demonstrate ability to understand drawing and highlighting discrepancies
• Follow area-specific procedures and documentation
• Prioritize work tasks to meet schedule and expectations, minimum guidance
• Perform tool tool-relativities and cleanroom systems troubleshooting during the hookup phase
• To perform equipment trouble-shooting of the equipments in NGTC when the need arises
• To perform utility-on after installation completion and to work closely with LCAM for complete closure
• To perform tests balancing of exhaust for new tools whenever necessary
• To perform measures for tool consumption during the hookup phase and to work closely with LCAM
• Use methods to organize, calculate, and display data accurately for utility and flowrate measurement
• Perform site activities in accordance to the Discipline

Requirements:

• Degree/Diploma in Mechanical/Electrical/Chemical engineering or equivalent
• Semiconductor experience (Equipment & Process)
• Facilities field or Wafer Fab Manufacturing equipment background will be an advantage.
• AutoCAD

Job Description:

• Developing and optimizing thin film processes, such as Physical Vapour Deposition (PVD) and e-Beam Evaporation for Micro-Electro-Mechanical-Systems (MEMS), Wide-Band-Gap (WBG) and Photonics applications.
• Thin film property characterization and process issue troubleshooting.
• Develop film defect reduction and yield improvement strategies.
• Act as a subject matter expert and resource for colleagues in integration teams.
• Work with Fab team in establishing statistical process control for thin film module.
• Generate and present reports to both internal and external customers.

Job Requirements:

• Bachelors/Masters in Materials Science and Engineering, Physics, Electrical Engineering, or closely related fields are welcome to apply.
• 3+ years direct industry experience in PVD and evaporation is preferred.
• Good understanding of thin film deposition techniques, defect reduction methodologies, yield improvement and thin film property characterization is desired.
• Understanding of thin film tool hardware, especially PVD and evaporation, is advantageous.
• Knowledge and prior hands-on experience on basic process characterization techniques such as SEM/TEM, EDX, SIMS, FTIR, XPS, ellipsometry is advantageous.
• Good understanding of thin film deposition techniques, defect reduction methodologies, yield improvement and thin film property characterization is desired.
• Possess good interpersonal and oral/written communication skills, with ability to deliver clear and concise messages to both internal and external stakeholders.

Job Description:

• Actively working with cross functional stakeholders to plan and develop new lithography process
• Validate mask designs, reticle tape out and post tape out verifications
• Actively participate in internal and external technical discussions to overcome process related challenges and provide relevant solutions
• Perform process characterization, margin study to determine the process capability of new process platform
• Act as subject matter expert and resource for researchers and industry partners to enable process and/or product realization
• Publish process development outcomes and breakthroughs in research community
• Engage with relevant equipment makers/vendors and responsible for selecting and procuring research equipment
• Work with fab team in establishing SPC for newly developed processes

Job Requirements:

• Bachelors/Masters in Materials Science and Engineering, Physics, Electrical Engineering, or closely related fields are welcome to apply
• More than 5 years of relevant working experience in R&D and/or industry environment and broad exposure in handling 6”, 8” and/or 12” substrate covering nano to micron technology nodes, preferably in SiC/GaN/Photonics
• Proficient in Photolithography tools including Immersion/KrF/I-line Scanner/Stepper/Mask Aligner, knowledge in eBeam Lithography tool will be added advantage
• Hands-on experience in metrology including but not limited to CdSEM, Overlay, OCD, DRSEM, Microscope. Capable to create recipe to support various research requirements
• Knowledge in design and simulation (ProLith, OPC,etc), and reticle layouts (OAS,GDS) review and basic tape out process
• Equipped with Photolithography skill set including fundamental lithography theory, Photoresist characteristic and application, new process setup (swing curve, FEM, DoE, Statistic Root Cause Analysis and problem solving methodology, etc), optimization and margin improvement.
• Relevant hardware and application knowledge in Photolithography tools and metrology.
• Possess good interpersonal and oral/written communication skills, with ability to deliver clear and concise messages to both internal and external stakeholders.

Job Summary:

DxD Hub is an end-to-end productisation partner, committed to transforming the MedTech landscape in Singapore through innovative solutions sourced from both local and regional partners. Our strengths are in cross-disciplinary product development particularly in molecular diagnostics, protein immune assays, and digital diagnostic technologies. We are seeking a skilled and experienced Mechanical Design Engineer to join our dynamic team. The successful candidate will take on the responsibility of leading a team in the design and development of mechanical systems. The candidate will work closely with cross-functional teams to lead projects, conducting feasibility studies and overseeing product development. They will also ensure that designs comply with both technical specifications and regulatory standards.

Job Roles and Responsibilities:

• Conceptualise, design, and develop mechanical components and mechanisms for medical devices.
• Responsible for the preparation and maintaining design documentation such as specifications, bill of materials, test protocols, test reports, etc.
• Lead a team to perform structural analysis, thermal analysis, and other relevant tests to validate and optimise designs.
• Responsible for feasibility tests to assess the viability and performance of proposed designs.
• Work closely with cross-functional teams, including teams in molecular diagnostics, protein immune assays, and digital diagnostic technologies as well as electrical engineers, software engineers, and project managers.
• Ensure compliance with DxD Hub Quality Management system, standards, and regulatory requirements such as FDA, ISO13485, etc.

Job Requirements:

• Master’s or bachelor’s degree in mechanical engineering, or related field.
• At least 5 years relevant experience in mechanical design engineering and completed one full product development cycle.
• Three years of experience or equivalent in close and collaborative work with design managers and product managers.
• Experiences in leading a mechanical design team is a plus.
• Proficient in CAD software, such as SolidWorks, AutoCAD, etc.
• Strong understanding of engineering principles, materials, and manufacturing processes.
• Excellent problem-solving and analytical skills.
• Effective communication skills and ability to work collaboratively in a team.
• Knowledge in quality, product verification test, QMS, and ISO13485 would be an advantage.
• Self-driven team player who can work in a fast-paced environment.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Overview of role

At Procter & Gamble (P&G), our Research & Development (R&D) division is where business, innovation, and technology converge to create a competitive edge. Since our founding in 1837, innovation has been the cornerstone of our success. From pioneering fluoride toothpaste to the first heated razor, R&D enables us to enhance lives in meaningful ways—today and for future generations. Our diverse R&D professionals are business leaders who leverage technical expertise to deliver groundbreaking product innovations for our 65 trusted brands.

We are looking for a Senior Scientist in Products Research to join our Skin Care team. We seek candidates with strong critical thinking skills who thrive on leading projects while mentoring and developing others. The successful applicant will spearhead initiatives in one of our “Disrupt Tomorrow” categories, focusing on identifying and addressing consumer and technical challenges with significant potential for growth in the Skin Care Category.

Your team

Located at the P&G Singapore Innovation Center, you will be part of the Skin Care organization. You will have the opportunity to work in multi-functional teams and engage with both internal and external partners.

Key Responsibilities

• Define and execute experimental plans to address complex consumer needs and insights, ensuring a holistic and superior consumer experience.
• Collaborate with cross-functional teams to deliver brand growth strategies through a multi-year innovation master plan, effectively bridging what is needed with what is achievable.
• Leverage global assets to create resource-efficient solutions, optimizing these assets to cater to regional consumer demands.
• Partner closely with the technical community to identify barriers and communicate risks to stakeholders effectively.
• Lead and mentor the Product Research team by clearly defining roles and responsibilities, ensuring full engagement and capability growth to meet both business objectives and individual development goals.

Qualifications

• Bachelor’s or Master’s degree in engineering or a relevant scientific field.
• Minimum of 8 years of experience in Consumer Product Research, with a proven ability to translate consumer insights into technical requirements across various categories.
• Prior experience in Skin Care, particularly in the Asia Pacific, Middle East, and Africa regions, is preferred.
• Demonstrated success in driving large, multi-functional business initiatives within a corporate environment.
• Possesses meticulous and analytical skills, with a strong aptitude for problem-solving.

About us

We produce globally recognized brands and we grow the best business leaders in the industry. With a portfolio of trusted brands as diverse as ours, it is paramount our leaders are able to lead with courage the vast array of brands, categories and functions. We serve consumers around the world with one of the strongest portfolios of trusted, quality, leadership brands, including Always®, Ariel®, Gillette®, Head & Shoulders®, Herbal Essences®, Oral-B®, Pampers®, Pantene®, Tampax® and more. Our community includes operations in approximately 70 countries worldwide.

Visit http://www.pg.com to know more.

Our consumers are diverse and our talents - internally - mirror this diversity to best serve it. That is why we’re committed to building a winning culture based on Inclusion and our ideal candidate is passionate about the same principle: you will join our daily effort of being “in touch” so we craft brands and products to improve the lives of the world’s consumers now and in the future. We want you to inspire us with your unrivaled ideas.

We are committed to providing equal opportunities in employment. We do not discriminate against individuals on the basis of race, color, gender, age, national origin, religion, sexual orientation, gender identity or expression, marital status, citizenship, disability, veteran status, HIV/AIDS status, or any other legally protected factor.

Job Description:

DxD Hub is an end-to-end productisation partner, committed to transforming the MedTech landscape in Singapore through innovative solutions sourced from both local and regional partners. Our strengths are in cross-disciplinary product development particularly in molecular diagnostics, protein immune assays, and digital diagnostic technologies.

We are seeking a Senior Engineer with system integration expertise with design oversight to join our team. As a vital member of our team, you will be involved in the design, development, and testing of medical devices, ensuring compliance with regulatory standards and industry best practices.

Your role will involve collaborating with cross-functional teams to create innovative solutions encompassing hardware, software and chemistry by conducting verification and validation activities, and providing technical support throughout the product lifecycle.

The ideal candidate will have a solid understanding of system integration principles, best practices in verification and validation testing, and knowledge of medical device regulations (such as ISO 13485).

Join our dynamic team and contribute to the development of cutting-edge medical devices that improve patient care and well-being.

Job Roles and Responsibilities:

• Develop high-level system architectures that meet user requirements while considering design feasibility.
• Ensure that all system components are compatible and can be integrated seamlessly.
• Design and implement integration strategies and validate the functions as intended while adhering to design principles.
• Lead collaborative teams for the design, implementation, and validation while is capable to perform hand-on testing independently if required to complete engineering or verification studies.
• Lead creating innovative solutions that align with both technical specification and user needs for medical products.
• Coordinate between design, engineering, assay, project manager, and other disciplines to ensure cohesive product development.
• Author or oversee the writing of protocols and reports.
• Foster collaboration among team members to address challenges from both a technical and design perspective.
• Creating and maintaining technical documentation, including design specifications, test protocols, and reports, ensuring compliance with regulatory requirements such as ISO 13485.

Job Requirements:

• Experience in system integration and innovation.
• Bachelor’s degree in Engineering, Design or equivalent engineering or science background.
• Comfortable with navigating uncertain situations without clear guideline.
• Adaptability to changing work conditions and project requirements.
• 5-10 years’ experience in cross-functional product development roles and completed one full product development cycle.
• Track record in working effectively with diverse teams, including engineering, design, and marketing.
• Strong interpersonal skills to facilitate communication between technical and non-technical stakeholders and ability to summarize and communicate complex problems in simple terms.
• Strong analytical skills to troubleshoot integration issues while considering design implications.
• Able to break down complex system in simple steps and identify interfaces between modules and generate system diagrams, workflows and reports.
• Curious and proactive approach to gather information necessary for decision-making.
• Knowledge of statistical tools for data analysis such as (Python/Matlab/Origin/LabView) will be a strong advantage.
• Experience with design software. Experience with CFD simulation software such as ANSYS is advantageous.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Job Description:

• Responsible for developing and optimizing ion-implantation and rapid thermal anneal (RTA) processes to support IME's various program requirements.
• Responsibilities include diagnosing malfunctions and using test equipment or software to test faulty hardware parts, applying knowledge of the functional operation of the Ion implanter and RTA equipment.
• Collaborates closely with vendors to optimize equipment performance and reduce tool downtime.
• Setup and execute design of experiments (DOEs) at various dose, energy, tilt, and twist levels, and evaluate experimental data to meet required process specifications.
• Responsible for analyzing test data related to implant-related defect formation, and quantifying and minimizing defects.
• Champion process window characterization and evaluation to drive quality and yield improvement.
• Closely collaborate with process integration teams to implement technology roadmaps, define process capability requirements, and address structural implications and constraints related to ion-implantation and RTA processes.
• Work with fab team in establishing statistical process control for ion-implantation and RTA processes.
• Generate and present reports to both internal and external customers.

Requirements:

• Bachelors/Masters in Materials Science and Engineering, Physics, Electrical Engineering, or closely related fields are welcome to apply.
• 3 years direct industry experience in ion-implantation, RTA and SiC MOSFET fabrication is preferred.
• Extensive proficiency in medium and high energy/current ion implantation, and RTA processes, including a comprehensive knowledge of equipment, equipment parts, and troubleshooting techniques to minimize equipment downtime.
• Good understanding of wide bandgap semiconductor materials and their corresponding dopant species.
• Expertise in ion channeling, ion bombardment, and their impact on the implant species profile.
• In-depth comprehension of defect formation and annihilation processes in the implanted region of semiconductors.
• Familiarity with essential device properties resulting from ion implantation and RTA processes.
• Understanding of the hardware of ion-implantation and RTA systems is advantageous.
• Knowledge and prior hands-on experience on basic process characterization techniques such as SEM/TEM, EDX, SIMS, Ellipsometry is advantageous.
• Possess good interpersonal and oral/written communication skills, with ability to deliver clear and concise messages to both internal and external stakeholders.

Scientist for Advanced Photonics (Photonic device and PDK development)

As part of IME’s Photonics & Sensors Department, the candidate will work on photonic device and PDK library development. This will include photonic device simulation, fabrication, characterization, optimization, and PDK development. You will work closely with an excellent multidisciplinary team working on photonics, electronics, semiconductor processes, integration, and fab operation.

Responsibilities:

• Design of passive and active photonic devices based on various 8-inch and-12 inch material platforms.
• Take the lead in designing integration flows to manufacture the designed devices.
• Develop automated electro-optic characterization systems for the designed and fabricated photonic devices.
• Characterize photonic devices and perform design optimization to meet the required device performance.
• Develop PDK for optimized photonic devices.
• Prepare presentations and papers for internal meetings, conferences and journals.
• Collaborate with the project team to ensure quality and on-time delivery for various projects. You will get a chance to be exposed to both industrial and academic projects.
• Performs other duties as assigned.

Qualifications:

• PhD in Integrated Photonics, Microelectronics, Opto-electronics, Physics or equivalent.
• Experience in one or more topics listed below is strongly preferred: Si photonics, SiN photonics, compound semiconductor photonics, photonic computing, quantum computing, LiDar, optical switch array.
• Strong hands-on experience in photonic device development or photonics integration.
• Strong hands-on experience in photonic simulation using various electrical / photonics design software.
• Strong communication, industry awareness, and problem-solving skills.
• Strong self-motivation and interest in the next-generation photonics technology development.

Job Description

The Duke-NUS Laboratory for Translational and Molecular Imaging (LTMI), Duke-NUS Medical School, is recruiting a Research Fellow/Senior Research Fellow specialising in Nuclear Imaging within the Immuno-Oncology domain.

The successful candidate will lead pre-clinical imaging efforts to validate novel imaging probes that target immune cell biomarkers. He/She will be responsible for the strategic planning, execution and communication of research. Candidates with strong records of scientific accomplishment in radiopharmaceutical sciences, immunology or related disciplines are encouraged to apply.

• Lead development of nude, syngeneic, and humanised mouse tumour models, with characterisation of immunophenotype with treatment response
• Collaborate on in vivo imaging strategies for pre-clinical characterisation of targeting probe specificity and sensitivity with PET/CT, SPECT/CT and/or optical imaging
• Monitor immune response to immunotherapies with longitudinal imaging assessments, supported with IHC, FACS
• Ensure regulatory compliance of research, including legal and ethical requirements
• Ensure timely reporting and presentation of study results to the team, and making appropriate decisions on data obtained from imaging studies
• Write and review research papers, and present at local and international conferences
• Provide guidance and mentorship to junior researchers, graduate and/or undergraduate students
• Demonstrate effective organisation/project management abilities to efficiently manage time and work activities

Job Requirements

• PhD in Immunology/Radiopharmaceutical Sciences or related disciplines
• Experience in multimodality imaging and image analysis (including PET, SPECT, CT and fluorescence) within the immuno-oncology domain is preferred
• Background in molecular biology, cell biology and oncology
• Experience in mouse studies (injection, anatomy, necropsy, pathology) is an advantage
• Proven track record of academic publications, including writing/drafting first author papers
• Self-motivated individual, enthusiastic to take initiatives, as well as able to work independently and collaboratively in a team
• Demonstrate excellent communication, technical independence, analytical and problem solving skills
• Enjoy team-work and collaboration

We regret that only shortlisted candidates will be notified.

Job Description

Chronic unresolved inflammation is a key pathogenic feature of prevalent inflammatory disorders and related syndromes that together are predicted to affect close to 60 million people with an annual cost of $90B. As such, the global anti-inflammatory therapeutic market is in urgent need for new targets for therapeutic intervention.

The Ho lab at Duke-NUS is building a platform to mine the human genome for novel determinants of the inflammatory response. We are seeking an experienced researcher who will participate and drive the execution of this platform in collaboration with other senior members of the team. The selected candidate will be expected to work at the bench as well as manage some aspects of the project such as administration of documentation required for smooth operations. Successful completion of the project will lead to opportunities for transition to industry roles. Candidates with strong technical ability and expertise in inflammation biology, and who are interested in taking discoveries from the lab through to commercialization are strongly encouraged to apply.

• Perform tasks and support all aspects of the research project.
• Cell culture and basic molecular biology (western blotting, PCR).
• Preparation of samples for NGS and proteomics analyses.
• Liaise with stakeholders including investors and grantors through regular meetings.
• Responsible for procurement related to the project such as vendor management, purchasing of laboratory supplies.
• Regulatory paperwork pertaining to the project (IRBs).
• Perform other related duties incidental to the work described therein.

Job Requirements

• Master’s Degree in Biology or related discipline. Candidates with PhD will be considered for Research Fellow appointment.
• At least 5 years of work experience in lab-based research.
• Track record of scientific output in inflammation biology (research publications).
• Demonstrated experience in molecular biology and cell culture.
• Experienced in project management and stakeholder management, and able to undertake independent research progressively.

We regret that only shortlisted candidates will be notified.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

• To perform safety-related work such as

(a) Conduct safety training / briefing for personnel who needs to work in the cleanroom;

(b) Carry out periodic emergency response drill to familiarize personnel with standard evacuation and response procedure;

(c) Carry out periodic inspection of safety facility such as eyewash & shower, chemical spill absorbent, fire extinguisher, etc.

(d) To monitor users’ activities on CCTV for any irregularities.

• To respond to an emergency call during and after office hour. The emergencies can be a building fire alarm, a fab evacuation alarm which can be a hazardous material spill or a leak or a medical emergency situation.
• To assess the situation and discuss a coordinated response plan with both Safety Manager and Lab Manager based on Emergency Response Plan (ERP)
• To be on standby / on-site for ad-hoc / extended hours lab operations request;
• To learn and have some understand of the chemistry for each individual tools and new projects to ensure Industrial Hygiene for the lab and users are met.
• To follow up, understand changes and make assessment on the safety aspect for tool continuous improvement process (CIP)
• To liaise with supplier for maintenance / procurement of ERT equipment / supplies;
• To perform risk assessments for the research activities related to E5 Cleanroom process and equipment.
• Support the development and implementation of Safety & Health Management System for AMAT-NUS Corp Lab conducting materials research.
• To support on Safety audits
• Any other duties as assigned.

Qualifications

• Diploma/ Degree knowledge and demonstrated experience in the laboratory safety management.
• Awareness of local safety regulations and some experience in developing and implementing Workplace Safety & Health Management System and Programmes.
• Understanding of the scientific and safety-related issues of materials research protocols and ability to review the risk assessments of such protocols.
• Knowledge and understanding of material safety principles, policies, and procedures.
• Effective communication (verbal and technical writing) skills, excellent customer service skills with attention to detail.
• Well verse with Microsoft office and good documentation control. IT application knowledge will be an advantage.

JOB DESCRIPTION

We are looking for highly-motivated and skilled programmers to join us in Biomed DAR (BII A*Star), to work on a new initiative in the development and deployment of software tools for data management support systems/biomedical data repository. Our work supports BMRC-wide research programmes and industry collaborations.

Successful candidates will work with a team of data scientists, data engineers and UI designers to program a web-application stack for automated data integrity checks, data curation, data annotation, and data imputation for structured data generated by research programmes. Successful candidates will have the opportunity to tap into a large pool of biomedical data from different disciplines and to interact with the companies/researchers to understand their real data needs.

JOB REQUIREMENT

· Minimum bachelor’s degree or diploma in the field of computer science, computer engineering, or other web programming intensive course. With expertise in at least one of the following areas: creating, maintaining, implementing APIs, front-end development, microservices architecture

· Possess minimum 5 years or more of relevant work experience.

· Ability to work independently to translate design templates and ideas into programs with efficient coding.

· Basic knowledge in data analytics and proficient in Python, Node.js, React, SQL

· Prior industry experience with engineering, financial services, healthcare is a plus.

· Able to deliver under tight schedule.

· Good team player with understanding of best practices and cybersecurity.

· Good interpersonal and communication skills.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

Position Overview: The Academy for Healthy Longevity at the Yong Loo Lin School of Medicine, National University of Singapore, seeks a dynamic and versatile Research Associate to serve as the Executive Support and Operations Lead. This pivotal role will provide high-level support to the Principal Investigator (PI) and executive staff, while gaining broad exposure to various aspects of geroscience and geromedicine research. The successful candidate will play a crucial role in advancing the Academy's mission to position Singapore as a global leader in healthy aging research.

This one-year appointment offers an exceptional opportunity for a motivated individual to fast-track their research career by engaging in diverse projects and gaining comprehensive insights into the field of healthy longevity.

Main Duties and Responsibilities

## Executive Support

- Serve as the primary liaison between the PI, executive staff, and internal/external stakeholders

- Manage the PI's schedule, including coordinating meetings, travel arrangements, and prioritizing commitments

- Prepare and edit high-level correspondence, reports, and presentations for the PI and executive team

- Assist in the development and implementation of strategic initiatives aligned with the Academy's goals

## Research Coordination

- Collaborate with research teams to track project progress and ensure timely completion of deliverables

- Assist in the preparation of grant proposals, ethics applications, and regulatory documentation

- Coordinate with internal departments and external partners to facilitate research collaborations

- Support the dissemination of research findings through publications and conference presentations

Main Duties and Responsibilities

## Operational Management

- Support day-to-day operations of the Academy, ensuring efficiency and effectiveness

- Support the management of budgets and financial planning for research projects and operational activities

- Coordinate facility and equipment management to support research activities

## Team Leadership and Development

- Assist in the recruitment, onboarding, and training of new staff and students

- Identify training needs and facilitate professional development opportunities for team members

- Foster a collaborative and innovative work environment that promotes excellence in research

## Stakeholder Engagement

- Represent the Academy at conferences, workshops, and public forums

- Assist in organizing and executing outreach events and initiatives to promote the Academy's work

- Build and maintain relationships with academic partners, industry collaborators, and government agencies

Qualifications

- Master's degree in Life Sciences, Medicine, Public Health, or a related field

- Minimum of 3 years of experience in a research or healthcare setting, with demonstrated project management skills

- Strong understanding of clinical research protocols, regulatory requirements, and ethical standards

- Excellent organizational and problem-solving skills, with the ability to manage multiple projects simultaneously

- Exceptional written and verbal communication skills, with the ability to interact effectively with diverse stakeholders

- Proficiency in data analysis, research methodologies, and relevant software applications

- Demonstrated leadership potential and the ability to work both independently and collaboratively

- Keen interest in geroscience, geromedicine, and healthy aging research

- Adaptability and willingness to engage in a wide range of tasks and research areas

This position offers an unparalleled opportunity to gain comprehensive exposure to cutting-edge research in healthy longevity while developing crucial leadership and operational skills. The successful candidate will play a vital role in advancing the Academy's mission and positioning themselves for rapid career growth in the dynamic field of geroscience.

JOB DESCRIPTION

We are looking for highly-motivated and skilled programmers to join us in Biomed DAR (BII A*Star), to work on a new initiative in the development and deployment of software tools for data management support systems/biomedical data repository. Our work supports BMRC-wide research programmes and industry collaborations.

Successful candidates will work with a team of data scientists, data engineers and UI designers to program a web-application stack for automated data integrity checks, data curation, data annotation, and data imputation for structured data generated by research programmes. Successful candidates will have the opportunity to tap into a large pool of biomedical data from different disciplines and to interact with the companies/researchers to understand their real data needs.

JOB REQUIREMENT

· Minimum bachelor’s degree or diploma in the field of computer science, computer engineering, or other web programming intensive course. With expertise in at least one of the following areas: creating, maintaining, implementing APIs, front-end development, microservices architecture

· Possess minimum 2 - 3 years or more of relevant work experience.

· Ability to work independently to translate design templates and ideas into programs with efficient coding.

· Basic knowledge in data analytics and proficient in Python, Node.js, React, SQL

· Prior industry experience with engineering, financial services, healthcare is a plus.

· Able to deliver under tight schedule.

· Good team player with understanding of best practices and cybersecurity.

· Good interpersonal and communication skills.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Job Description:

We are seeking an AI/ML expert to drive AI in drug discovery in the area of pharmacology and pharmacometrics, including PK/PD, in the Bioinformatics Institute (BII). The PI will build a research group in BII and collaborate closely with clinicians and researchers to drive this effort across Singapore. The PI is also expected to lead or participate in grant proposals and work with industry to translate new technologies developed.

Job Requirements:

• PhD in Bioinformatics, Computational Biology, Data Science, Computer Science, Mathematics, Engineering or a related field.
• Deep experience in AI/ML methodologies related to drug discovery and pharmacology.
• 5-10 years’ experience in the drug development process.
• Outstanding record in publications, patents or securing research funds, or substantial industry experience.
• Strong management skills in leading a research team, executing projects and working with multiple stakeholders.
• Consistent track record in delivering outcomes for AI /ML projects related to healthcare and pharmacology.
• Excellent communication skills