Total 18 Quality Assurance / Control job vacancies in SITE - Meijer Heart Center - 150 Michigan St - Grand Rapids

This is not a remote work position. The selectee will report to an assigned DOL office location on a regular basis and is eligible for participation in telework as determined by management in accordance with DOL policy.

Major Duties:

• This position is established as District Director (DD).
• Responsible for planning, prioritizing, directing, and assigning work, collaborating with peers and subordinates, including all fiduciary responsibilities, to achieve OFCCP's mission.
• Schedules compliance reviews within the District Office's (DO) jurisdiction. Investigates and resolves discrimination complaints, closes complaints where no basis is found, and seeks appropriate resolution when applicable.
• Recommends the issuance of show cause notices when applicable.
• Develops cases for which administrative and/or judicial actions are appropriate and recommends these actions to the Regional Director (RD) for disposition.
• Analyzes affirmative action plans submitted by contractors, including the establishment of linkage agreements.
• Monitors contractors' conciliation agreements, progress notes, and consent decrees.
• Conducts detailed and comprehensive analyses of federal contractors' total employment procedures and practices to determine responsiveness to federal procurement and equal employment opportunity (EEO) laws, executive orders, policies, rules, and regulations.
• Identifies discrimination based on evaluation and investigatory activity.
• Manages the efforts of a staff of supervisors and compliance investigators and maximizes their utilization through effective work assignments.

OFCCP enforces E.O. 11246, as amended; Section 503 of the Rehabilitation Act of 1973, as amended, and 38 U.S.C. 4212 of the Vietnam Era Veterans' Readjustment Assistance Act of 1974, as amended. These laws ban discrimination and require Federal contractors or subcontractors to take affirmative action to ensure that all individuals have an equal opportunity for employment, without regard to race, color, religion, sex, national origin, disability, status as a protected veteran, sexual orientation or gender identity.

Starting at $134,751 Per Year (GS 14)

To work with the Quality Improvement Team (QIT) to identify, implement and review the systems within the Practice, to maximise income and patient outcomes. To utilise Practice and patient data to improve performance and assist the Practice in meeting targets and improving the provision of health to the Practice population. Please see attached document for full job description.

• YOU WILL/MAY:
• Ensure that regulated establishments produce a safe product by executing appropriate inspection methods, determining non-compliance with regulatory requirements, documenting noncompliance and initiating enforcement actions, where warranted.
• Verify that meat and poultry slaughter and/or processing establishment's Sanitation Standard Operating Procedures (SSOP) and Hazard Analysis and Critical Control Point (HACCP) Plans meet regulatory requirements.
• Execute Sanitation Standard Operating Procedures (SSOP) and Hazard Analysis and Critical Control Point (HACCP) Plans effectively to prevent unsanitary conditions and adulteration of product.
• Review records, observe plant operations and conduct hands-on verification to ensure compliance with regulatory requirements and prepare detailed documentation (Non-Compliance Records) of non-compliance with regulatory requirements.
• Determine when regulatory control action is necessary. You will assess whether the plant's corrective or preventative actions are acceptable and effective, if there are trends in noncompliance, or if an enforcement action is warranted.
• Conduct regulatory oversight activities inside plants in matters relating to other consumer protections (e.g., economic adulteration and misbranding).
• Have contact with plant managers, owners and others to explain legal and regulatory requirements, discuss operation of the plant's SSOP, HACCP plan and other food safety programs.
• Communicate and defend determinations on non-compliance issues and discuss plans for addressing non-compliance.
• Work with a variety of individuals to resolve problems, clarify differences of interpretation concerning HACCP and other food safety or consumer protection requirements.
• Advise other Agency inspectors, supervisors and officers on inspection and enforcement matters for which you are involved.
• Conduct various samplings, surveys and tests to obtain pertinent data on potential problem areas, industry trends, or other issues of current interest to the Agency.
• Be involved in performing health and safety verification sampling and tests for detection of specific microbes (e.g., salmonella, listeria, etc.), residues or contaminants.
• Assure that products approved for import are in full compliance with all applicable Federal regulations governing the importation of meat and poultry products.
• Authorize entry of all meat or poultry products considered to comply with Federal regulations or refuse entry of any products which violate any of the requirements for admission into this country.
• Coordinate with other Federal agencies (e.g., the Animal and Plant Health Inspection Service (APHIS) and U.S. Customs and Border Protection (CBP) on such matters as animal health restrictions and refused entry lots.

Starting at $39,576 Per Year (GS 5-9)

• Performs duties associated with the administration of the quality assurance provisions of contracts by designing, implementing, and maintaining a risk-based surveillance program and assessment plan.
• Identifies opportunities for process improvements through analysis of process measurement data.
• Serves as a member of a multi-functional or technical team. Responsible for implementing the overall Quality Program for a diversity of products and services in support of U.S. Government acquisition at one or more supplier’s facilities.
• Ensures contractor compliance with all requirements related to the design, manufacturing, repair, overhaul, and modernization of a variety of items for contractor and customer activities throughout the world.
• Independently performs audits/surveillance of contractor’s processes to ensure customer and contractual requirements are met.
• Investigates and provides data on customer complaints/concerns regarding contractor’s quality performance and processes which impact user satisfaction.
• Provides technical support to all other DCMA team members, assisting in the analysis of contract related issues to determine the best course of action to support the contractor and customers.

Starting at $82,764 Per Year (GS 11)

We are seeking a confident individual with good knowledge of the machining or welding of sheet metal, to join our client as a Quality Inspector. The role is working in the Quality department of their large modern factory in Stanton, Suffolk.

It is a full-time role, working 39 hours per week from 8:00 – 16:30 Mon to Thurs, and 8:00 – 15:30 on Fridays with overtime available during the week. The annual salary for the role ranges from £26,000 - £28,000 per annum plus overtime, and the company offers 25 days annual leave + 8 bank holidays annually.

The Company

Our client has been designing and manufacturing machinery and accessories (on both a small and large scale) for global agricultural markets for over 50 years. They have achieved enormous success in their field due to their reputation for quality products and on-site engineering expertise. They are also a very stable employer, with high retention rates of staff and an excellent friendly, tidy, and safe working environment.

The Role

Working as part of a two-person team, you’ll be responsible for checking the quality of all machined components used within the production of the company’s products.

Duties and responsibilities include:

Identifying any rejects/reworks
Manage process improvements through communicating with all departments.
Log and monitor quality issues
Monitor and expedite design improvements.
Be involved in establishing quality standards for production of new products.
Assist in improving and implementing process change to ensure repetitive mistakes are minimised.
Perform measurements of all parts requiring quality checks.
Maintain gauge calibration status within the organisation.
Partake in quality audits when required and report any findings to your colleague
Role Requirements

Essential requirements to be considered for this role are:

Experience working with sheet metal in some capacity (machining or welding ideally)
The ability to read engineering drawings
An excellent attention to detail and eye for accuracy
Strong communication skills, with the confidence to communicate quality issues with different departments
Own driving licence to get to the company’s rural location as it is inaccessible via public transport.
How to Apply

Please apply to Kate Howes through our website or you can email a copy of your CV to kate@horizoneast.co.uk

We aim to respond with specific feedback to every applicant via email within 14 days. However, as we are a small two-person independent agency, if we are extremely busy this may take longer. If you would like feedback sooner, then feel free to contact us via email and we will come back to you ASAP.

About Horizon

Horizon Search and Selection Ltd is owned and run by Gemma and Kate from our private offices in Bury St Edmunds. We’ve been in business for 13 years but have a combined 36 years’ recruitment experience between us. We’re friendly recruitment folks and love what we do. Here, we are acting as an employment agency on behalf of our client, the employer. We act as the ‘introducers’, so if you are successful, you will be directly employed by our client. We never share your details with anyone (including our client) without your consent. Any questions? Get in touch!

GDPR

Please note that all applications and enquiries are treated in the strictest of confidence. As part of our GDPR compliance, your CV and contact details will not be held by us for longer than 30 days unless written consent to do so is requested and obtained. Your CV and contact details will never be shared by us with a 3rd party unless specific consent has been obtained to do so. For more information on our privacy policies and how we comply to the GDPR then please visit our website and click on our privacy policy at the bottom of the page.

Find us on Facebook & LinkedIn (Horizon Search & Selection Ltd)

***THIS IS A TITLE 5 EXCEPTED NATIONAL GUARD POSITION***
This position is located in an Army National Guard (ARNG) Air Traffic Control Tower. The primary purpose of this position is to provide tower Air Traffic Control (ATC) services to military and civilian aircraft operating under Instrument Flight Rules (IFR) and Visual Flight Rules (VFR). Incumbent also functions as an ATC Specialist/ATC Training Specialist with responsibility for guiding and training for Air Traffic Controller trainees.

DUTIES
1. Performs air traffic control duties in the control tower. Directs movement of aircraft in flight and on the ground by utilizing pilot and controller reports, visual observation, and/or tower displays, or a combination of methods and in close coordination with other controllers. under restrictive time and space limitations, formulates and issues ATC clearances and instructions to provide for the required separation and or sequencing of all IFR and VFR traffic within delegated airspace.

2. Executes the standardized ATC training program in accordance with guidelines established by regulations of the Department of Army (DA), Department of Defense (DoD), and Federal Aviation Administration (FAA). Incumbent is responsible for the utilization of training materials that ensure controller-trainees are adequately trained and tested with the goal of creating a cohesive ATC team that provides multi-level ATC services to the aviation customer. Incumbent ensures all newly assigned trainees receive training in accordance with applicable regulations.

3. Operates, trains, and provides preventative maintenance on a host of automated communications and display hardware and software systems that are integral and vital to the operation of the air traffic control facility. Maintains communications with aircraft and adjacent facilities to transmit and receive instructions and information relative to flight.

4. Evaluates weather reports from automated (ASOS, AWADS, IDS, etc.) or other sources (i.e. Pilot Reports) and ensures weather information is accurate, specific, and timely. Modifies, corrects, or augments as appropriate for official weather reporting. Provides dissemination of weather warnings, Center Weather Advisories (CWA), Significant Meteorological Information (SIGMET), or Meteorological Information (MET) watch advisories.

5. Conducts and directs aircraft mishap and hazardous air traffic systems reporting. Serves as the focal point on the airfield for ground or airborne aircraft mishaps, system reports on hazardous air traffic activities, and ATC and pilot incident inquiries.

Starting at $80,739 Per Year (GS 11)

• Advises on, integrates, monitors and/or performs duties concerned with the Safety, Reliability, Quality and Mission Assurance disciplines for Launch Vehicles managed by the Launch Services Program.
• Responsible for integration and coordination of all independent mission assurance flight readiness aspects for assigned missions; ensuring mission unique hardware, first flight items, and launch vehicle hardware anomalies are evaluated and assessed.
• Maintains cognizance of launch vehicles from mission launch vehicle selection through launch campaign activities and integrated vehicle/spacecraft operations.
• Reviews mission products and advises the Launch Services Program and Technical Authorities on the appropriate mission risk above the baseline (residual risk) for the launch vehicle; Ensures sufficient risk acceptance rationale exists.
• Supports the launch countdown, providing recommendations on any anomaly resolutions and presenting the go/no-go position to SMA management, and ensures acceptable resolution for any post flight anomaly observations.
• Serves on panels/committees and working groups responsible for conducting detailed technical/programmatic independent assessments on vehicle systems and fleets.
• Evaluates and integrates mission related assessments and reviews and keeps the Directorate informed of progress and unusual issues/concerns.
• Fosters a culture of engagement, diversity, inclusiveness, excellence and innovation. Champion NASA's commitment to Diversity, Equity, Inclusion and Accessibility to create an environment that promotes a commitment to safety, integrity, and teamwork.

Starting at $123,014 Per Year (GS 14)

Full Time Permanent opportunity (35 hours per week)
Leaseback Vehicle
Friendly and people-orientated team environment

Our Team
At Bayside Council, we are committed to a positive, flexible and supportive workplace culture, where our people and customers feel respected and valued. We are proud to serve our community through operating with transparency, integrity and in the best interests of the Bayside community to deliver exceptional service.
The City Life directorate delivers personalised and public services to enhance community life, including family, aged, leisure and cultural services.
The role sits within the Compliance and Community Safety unit, under the City Life directorate.  The purpose of the Environmental Compliance Officer position is to investigate claims of unauthorised and/or unsafe development or use.
About the Role
You will mainly be responsible for the delivery of construction compliance and protection activities, respond to related
... Click here to view more detail / apply for Environmental Compliance Officer

• The nurse consultant applies expert clinical knowledge to guide patient safety/clinical risk management practices with the goal of enhancing health care delivery and decreasing the risk-of adverse events.
• Utilize statistical and epidemiological tools to assist staff in the analysis of data from adverse/sentinel events, close calls/near misses, or project findings.
• Serve as a facilitator and guides patient safety review teams in the identification of the causes of adverse events as well as identifying and implementing practical, measurable, and sustainable corrective actions.
• Participate in continuous readiness projects and conducts site visits to assess organizational processes for compliance with regulatory agency and accreditation standards requirements.
• The incumbent utilizes a combination of patient safety tools and evidence-based practices to improve measures of quality and patient safety.

Starting at $128,957 Per Year (GS 11)

• Assist in conducting meetings, briefings, training sessions, or conferences to express quality assurance issues or concepts in a clear, concise and convincing manner.
• Convey quality assurance information using a variety of written formats and techniques to audiences with a varying level of knowledge on the subject.
• Assist in identifying for corrective action deficiencies caused by improper storage methods, extended periods of storage, or inherent deterioration characteristics of the material.
• Assist in reading, interpreting and applying technical data such as blueprints, engineering drawings, product specifications, and/or technical manuals.
• Assist in identifying inadequacies and recommending corrective action.
• Assist in verifying that products comply with requirements prior to acceptance.
• Assist in verifying product quality using sampling inspection or, when appropriate to the characteristics involved or pertinent quality history, more intensive product inspection techniques.

Starting at $54,061 Per Year (GS 7)

• Performs duties associated with the administration of the quality assurance provisions of contracts by designing, implementing, and maintaining a risk-based surveillance program and assessment plan.
• Identifies opportunities for process improvements through analysis of process measurement data.
• Serves as a member of a multi-functional or technical team. Responsible for implementing the overall Quality Program for a diversity of products and services in support of U.S. Government acquisition at one or more supplier’s facilities.
• Ensures contractor compliance with all requirements related to the design, manufacturing, repair, overhaul, and modernization of a variety of items for contractor and customer activities throughout the world.
• Independently performs audits/surveillance of contractor’s processes to ensure customer and contractual requirements are met.
• Investigates and provides data on customer complaints/concerns regarding contractor’s quality performance and processes which impact user satisfaction.
• Provides technical support to all other DCMA team members, assisting in the analysis of contract related issues to determine the best course of action to support the contractor and customers.

Starting at $82,764 Per Year (GS 11)

On behalf of our client, we are looking for a full-time experienced Quality Assurance Specialist. The Quality Assurance Specialist will play a pivotal role in upholding and maintaining the highest quality standards with the organisation.

The daily duties and responsibilities include:
• Develop, implement, and manage a comprehensive quality assurance systems.
• Communicate regulatory issues to assure full understanding and compliance.
• Provide management to the organisation in the development and implementation of regulatory strategies to gain approvals.
• Provide leadership and direction for significant regulatory changes that may impact compliance status or represent significant business risk.
• Participate in the Risk Management program.
• Be available to travel both nationally and internationally as required conducting audits and providing support to suppliers and other companies association the group.
• Carry out additional duties that may be assigned to you.

Qualification Requirements
• At least a Bachelor's degree in related field, or 5 years of relevant work experience.
• Minimum of 2 years of relevant experience.
• ISO certifications highly desirable.
• Strong leadership and management skills.
• Excellent problem-solving and analytical abilities.
• Effective communication and interpersonal skills.
• Proven ability to work in a fast-paced environment and meet deadlines.

Salary - Salary being offered is commensurate with qualifications and experience and is between $75,000 – 110,000 excluding superannuation.

APPLY HERE: https://hire.xemplo.com/public/69b514fc-0b49-4663-8e38-be0777f9b67a/d28a2764-ffe6-46e4-a7ff-73bf3883cac6

• Serves as Supervisor of Contract Administration Activities for DLA Installation Management Operations Susquehanna.
• Oversees documentation of contract services as provided by Host at Mechanicsburg site as well as routine maintenance requirements
• Administering a variety of construction and service contracts including facility improvements, renovations and repairs, and services contracts such as janitorial services, elevator services, fire suppression systems, etc
• Oversees staff assigned to contract administration and observation for facility related projects and to routine and improvement tasks.
• Manages workload, make assignments, manage asset data collection and provide quality control for work performed.
• Manages technical planning and designing for improvements projects associated with facilities to be constructed or modified.

Starting at $99,200 Per Year (GS 12)

Senior Control Systems Engineer
FWG18017
South Sydney, NSW

An opportunity exists for a Senior Control Systems Engineer in vertically integrated provider of energy control solutions experiencing a strong period of growth. The role has responsibility for designing control systems for power generation, protection systems and rotating machinery. Specifically, this will include genset and power station control, electrical-mechanical protection and turbine controls (gas, steam, hydro).
• Perform, and lead, complex software/hardware TSP creation, test setups/troubleshooting, engine calibration, emissions testing, testing of customer/internal hardware/software.
• Create and update BOM's, wiring diagrams, drawings, electrical schematics, test plans, training material, creation of O&M manuals for customers.
• Supervise FAT and SAT.
• Coordinate project milestones/project scope and ensures activities associated with the PLC process and department level procedures are adhered to.
• Mentor and assist level 1 and 2 engineers.
• Participate or lead projects in analyzing and sizing of third party internal/external products and definition.
• Support the commercial group in proposal creation, technical support commercial offers, and customer presentations.
• Co-author papers with other engineers’ complex or novel research assignments.
• Accountable for emissions certification support or regulatory compliance support for products and systems.

Requirements
• Degree in Engineering, Science or another technical equivalent.
• Significant previous experience in designing control systems for power generation and protection systems (genset and power station control and electrical-mechanical protection)
• Significant previous experience in designing control systems for rotating machinery (gas and steam turbines in refinery process and LNG industries, as well as hydro turbines).
• Preferably previous experience with ComAp, DeepSea, Woodward or DEIF controllers.
• Knowledge of design tools, basic use of DFSS tools and methodologies.
• Knowledge of Engineering quality systems (PLC, engineering change, configuration management).
• Ability to run existing standard tools (e.g. GAP, ProE, NetSim, Toolkit, Intellution, Citect, AutoCad, MatlLab, Simulink).
• Well-developed leadership skills; ability to drive results across organizational boundaries.
• Complete understanding of component and system function and testing requirements, manufacturing processes, drawings and standards.
• Excellent written and verbal communication skills in English.
• Complex problem solving and troubleshooting skills.

***THIS IS A TITLE 32 NATIONAL GUARD POISITION THAT REQUIRES MILITARY MEMBERSHIP***

This position is located at an Air National Guard Air Operations Group. Its paramount purpose is to monitor and oversee the planning, organization, and supervision of all unit programs required by Air Force, Major Command, and ANG regulations in the training and employment of the force level Air Operations Center (AOC) weapons system. The Operations Director must ensure AOC weapons systems personnel are capable of operating in a United States-only, North Atlantic Treaty Organization (NATO), or a tailored alliance environment. In addition to supervisory responsibility, the incumbent possesses rated or air battle management experience and maintains AOC positional certification.

This position requires military membership. It is designated for National Guard officer incumbency only. The incumbent provides supervision, subordinate guidance and team leadership to NDS and DS employees. Incumbent performs long-term planning and organizational development necessary accomplish aerospace warfare training functions in support of programs essential to state Air National Guard daily operations, training, and readiness missions. Fosters an environment conductive to teaming among service providers and customers to meet state Air/Army National Guard requirements.

1. Plans work to be accomplished by the organization which consists of full-time subordinates engaged in technical and administrative work.

2. Oversees all unit operations activities which based on unit mission and equipment may include any of the following theater level Air Operations program support functional areas: Combat Operations, Combat Plans, and Training/Evaluation, Weapons and Tactics, and Scheduling.

3. Develops long-range training and deployment plans for the unit to meet training goals, higher headquarters inspection schedules and overseas deployment requirements.

4. Serves as a Senior Operations advisor on the Commander's staff to coordinate operational exercises and contingency taskings.

5. Serves as the Operations representative on the Commander's Financial Management Board.

6. Develops and directs the force level weapons system implementation program in coordination with higher headquarters to meet approved employment concepts.

7. Oversees training of all assigned/attached AOC positionally assigned battle rostered personnel.

8. Monitors the implementation of an effective division safety program for all operations and related ground activities.

9. Develops division policy for fight management personnel to ensure effective and efficient administrative control of all flight documentation and individual flight records.

10. Must maintain positional certification and meet requirements as prescribed by applicable regulations and directives.

Starting at $103,409 Per Year (GS 13)