Total 36 Quality Assurance / Control job vacancies in Bristol City Centre, Bristol, BS81RL

Under the general direction of the Principal Inspector or Supervisory Principal Inspector accomplishes the following duties:

A. Technical Administration

On a continuing basis, ensures assigned organizations are properly and adequately organized, staffed and equipped; establishes and conducts adequate training programs; maintains record keeping systems; and facilities and ensures procedures meet all regulatory requirements.

Chairs joint Federal Aviation Administration (FAA) and industry meetings. Maintains regular contact with organizations assigned and coordinates with top management officials. Requires or directs correction of any deficiencies/discrepancies and refuses or withdraws approval if they cannot be resolved.

Responsible for conducting enforcement investigations and preparation of final reports and recommendations on disposition. Performs or supervises the emergency suspension of certificates or cancellation of operations specifications. Conducts or directs the reexamination of certificated airmen or recertification of an operator or agency.

Conducts investigations of public complaints, congressional inquiries, and aircraft incidents and accidents. Provides verbal and/or written technical assistance to legal counsel, testifies at court trials and formal hearings, and gives dispositions.

Coordinates minimum equipment list (MEL) approvals with the principal inspector. Takes enforcement action in instances of noncompliance with the MEL.

Coordinates with geographic inspectors for the accomplishment of non-routine air carrier surveillance.
Assists Principal Inspector in the planning and implementation of certificate holders surveillance via usage of the appropriate safety system.

B. Certification

Approves/accepts or disapproves/rejects manuals and revisions to such manuals. May require amendments to previously approved manuals to accomplish the following: correct any conflict with regulatory requirements; eliminate unsafe practices: and/or improve the specificity of instruction.

Evaluates training programs to ensure that they meet the requirements of 14 CFR. Approves or disapproves these training programs including flight simulators, training devices, or other such equipment used in these programs.

Approves/disapproves designation of check airmen and makes recommendations on the appointment of designees.
Evaluates operations and facilities by on-site inspections and review of reports by geographic inspectors or others. Negotiates changes essential or desirable in their policies and procedures. Determines the appropriate methods and/or plans for securing corrective action and determines through on-site inspection or inspector reports the effectiveness of any action.

Evaluates and approves/disapproves requests to operate under conditions not previously authorized and may prescribe additional conditions and limitations as appropriate.

Approves the original issuance of operations specifications and issues original operating certificates. Approves amendments to operations specifications. Evaluates the safety of proposed changes in route or airport authorizations; prescribes any changes required before approval.

Directs or participates in flight evaluations to determine compliance with 14 CFR. Recommends changes that will be required prior to approval.

Duties and Responsibilities continued below

Starting at $104,604 Per Year (FG 14)

Project Control Lead

Location: Bristol, BS2 0JJ
Salary: £65,000 per annum
Hours: 37.5 hours per week

Are you a skilled Project Control Lead looking for an exciting opportunity to shape the delivery of high-profile nuclear projects? Join our dynamic team in Bristol and play a pivotal role in the planning, scheduling, and control of complex engineering initiatives.

About the Role

As a Project Control Lead, you will work closely with the project manager to oversee planning, scheduling, cost control, risk management, and reporting activities. You'll ensure alignment with project objectives while maintaining a focus on health, safety, quality, and environmental compliance.

Key Responsibilities:

• Develop and maintain the baseline programme in coordination with the project manager.
• Report on progress, update the programme for changes, and assess the critical path to mitigate risks.
• Monitor cost and time against the baseline plan and budget.
• Provide detailed reports on project costs, cash flow, and performance against KPIs.
• Identify, monitor, and analyse risks, working collaboratively with the project management team.
• Manage project documentation, including customer documentation and deliverable, while maintaining accurate registers.
• Analyse current project positions and forecast end-of-project outcomes.
• Liaise with clients and stakeholders to align expectations with project goals.
• Support health, safety, quality, and environmental (HSEQ) initiatives and adhere to company policies and procedures.

About You

To excel in this role, you'll need:

• An Engineering or Technical degree and professional qualifications (APM or ACostE).
• Demonstrated experience in project control and working within a multi-disciplinary team.
• Strong analytical skills with a focus on critical path analysis and risk mitigation.
• Excellent communication skills to effectively liaise with clients, stakeholders, and team members.
• A proactive and interrogative approach to health, safety, and environmental practices.

What We Offer

• A competitive salary of £65,000 per annum.
• The opportunity to work on cutting-edge projects in the nuclear sector.
• A collaborative and safety-focused work environment.

Ready to lead the way? Call Danielle on 01489 336283 to apply or learn more about this exciting opportunity.

Take your career to the next level-apply today!

Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application.

Candidates must be eligible to live and work in the UK.

For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.

Executive Manager, Financial Crime Compliance Detection
See yourself in our team
Financial Crime Compliance (FCC) is a team of over 190 professionals and is an integral part of CBA?s Group Risk Function. FCC is accountable for the development, implementation and ongoing governance of the group?s financial crime compliance program - driving the Group?s approach to managing Anti-Money Laundering/Counter Terrorist Financing (AML/CTF), Sanctions, Anti-Bribery and Corruption (ABC) and Anti-Tax Evasion (ATE) risks and obligations.
What your role will involve
You will be part of the leadership team reporting to the General Manager Financial Crime Analytics. You will work closely with colleagues both within FCC and Financial Crime Services (FCS), as well other key stakeholders enterprise wide to support the Group in the effective and efficient management of financial crime risks.
You will be responsible for managing a team of analytics professionals and to provide financial crime ... Click here to view more detail / apply for Executive Manager Financial Crime Compliance Detection

Our client is a newly established organisation looking to build a world-class team to deliver cutting-edge solutions to the biopharmaceutical industry. This newly created role is a unique opportunity to join a growing company at a pivotal stage and make a significant impact on their future success.


About the role:    


The QC Manager will be instrumental in shaping and leading the Quality Control function of our client The ideal candidate will bring strong technical expertise in leading QC teams for biological products and will be a hands-on leader capable of establishing robust QC systems in compliance with GMP standards. This is a critical role in ensuring that all products meet stringent quality standards and that the company is inspection-ready as they scale.


Your key responsibilities will include, but will not be limited to:



Managing the day to day operations of

... Click here to view more detail / apply for Quality Control Manager

Manager, IT & Business Controls Assurance
Team:
Institutional Banking and Markets (IB&M) is responsible for managing the Group's relationships with major corporate and government clients and institutional investors, and provides a full range of capital raising and risk management products and services. The division also performs an important internal role for the Group by providing FICC market, equity derivatives, lending and capital markets execution capabilities to other CBA business units that allows them to capture opportunities with their customers.
The IB&M Non-Financial Risk and Conduct team is responsible for the management of non-financial risk for IB&M?s global operations across Australia, Asia, Europe and North America. This includes the identification and assessment of key risks that could impact the way in which the IB&M business achieves its objectives, and ensuring these are mitigated as appropriate.
The Non-Financial Risk and Conduct team is responsible for developing the non-financial ... Click here to view more detail / apply for Manager IT & Business Assurance

Executive Manager Operational Risk & Compliance, Group Support Units

2 positions available

Do work that matters:
Risk Management (RM) is responsible for developing the risk frameworks to allow the Group to take conscious exposures to credit, market, operational, compliance and insurance risks within the approved appetite.
The Operational Risk & Compliance - Group Support Units team provides independent review and challenge of Operational Risk and Compliance activity within the Support Unit (SU) businesses (e.g. Financial Services, Group Corporate Affairs, Risk Management, Legal & Group Secretariat, Group Strategy and Human Resources).
See yourself in the team:
As Executive Manager, Operational Risk & Compliance, you will lead and guide Group SU businesses in embedding the Operational and Compliance Risk Management frameworks (ORMF and CRMF).  You will engage with senior stakeholders across the SU?s to provide meaningful and balanced insights to risk activity within their ... Click here to view more detail / apply for Executive Manager Operational Risk and Compliance

Our client in Victoria is looking for someone to conduct and coordinate engineering activities and ensure effective handover of the project to routine operations beginning of 2026. The focus of this role will be to act as the Operational Readiness representative for the Maintenance and Utilities department and conduct engineering and maintenance services to support project delivery of the production areas (Bulk Process and Fill/Finish).

Skills and Qualifications:

• Act as Engineering Plant owner during project throughout key stages of Design, Procurement, FAT, Installation, Commissioning, SAT, Qualification and Handover.
• Develop and provide equipment reliability and process engineering expertise for the project including FMEA, creation of maintenance plans and spare parts assessments.
• Ensure that all engineering tasks related to Operational Readiness are completed in a timely manner to allow smooth transition through completion of qualification, validation, PPQ batches and onward to routine production.
• To investigate, develop and implement solutions to engineering problems related to new manufacturing equipment and systems.
• To develop and apply engineering standards and procedures and provide advice on issues within the engineering field.
• To liaise with external Vendors/Consultants and internal Engineering, Production and Quality colleagues to achieve project objectives
Act as Engineering Plant Owner, establish and provide Subject Matter Expertise for the project’s production equipment (Bulk Process & Fill/Finish) and support project delivery through the following:
• Review design specification documents (P&IDs, flow paths, specifications)
• Review differences between existing BACE I and new BACE II plants
• Review 3D models
• Lead Device (Instrumentation) and Criticality Assessments
• Provide input for maintenance procedures (i.e. access to equipment for job tasks)
• Liaise with the data entry team to coordinate asset creation in SAP
• Lead maintenance FMEA
• Liaise with maintenance teams and planning departments to develop Preventative Maintenance plans (PMs).
• Develop mechanical and E&I spare part requirements
• Review and participate in FAT’s
• Participate in safety assessments (e.g. HAZOP, LOPA)
• Support installation, commissioning and qualification activities to facilitate knowledge transfer from the project to operations
• Organise and/or manage staff/contractors to perform work as required.
• Raise and implement Process Change Requests and Deviations/CAPAs where appropriate.
• Liaise with external Vendors/Consultants and internal Engineering, Production and Quality groups to ensure project objectives of Safety, Quality, Schedule, Scope and Cost are achieved.
• Develop and implement the long-term technical master plan for the area to ensure effective lifecycle management of the equipment and provision of critical spare parts.
• Develop and maintain technical and operating documentation, and conduct training activities, as required.
The successful candidate must have relevant experience in a similar role and a relevant bachelor degree is preferred.

Country:  Australia







Location:  Sydney, NSW, Australia







Location details:  Smithfield







Employment type:  Undefined term







Full-time/part-time position:  Full time







Workplace Type:  Field Service

















At Konecranes, we believe that great customer experience is built on the people behind the Konecranes name. Everything we do, we do with passion and drive. We believe diversity drives business success and is the foundation for our growth. We welcome different backgrounds and





... Click here to view more detail / apply for Inspector

Process Operator - Quality Improvement
Job no: Work type: Full Time Location: Sydney, Parramatta Creek Categories: Processing

The role
Reporting to the Quality Assurance Coordinator, you will verify that products produced at the facility meet the required specification for quality and food safety, achieved through the application of routine reliability testing of finished products:
Duties include:

Auditing of the Pre-Requisite Programs (PRPs) that are implemented to support the Food Safety and Quality programs. These PRPs include a range of Good Manufacturing Practices (GMPs) activities that are implemented across the site.
Conduct daily onsite quality control, documentation, and processes, including completing records as required by document control
Actively collaborating with Production staff to ensure compliance with food safety standards and participating in continuous improvement and project initiatives within the factory.
Conduct in-line production checks


... Click here to view more detail / apply for Process Operator ? Quality Improvement

HEAD OF BUILDING SAFETY AND COMPLIANCE (FTC – 6 months)
National role hybrid – home/office/travel
c£74,000 + CA Total package £84,300

Our client, a not-for-profit housing association require a Head of Building Safety and Compliance Manager. The role is working on a FTC basis for 6 months reporting into the Director of Building Safety and Compliance.

As a member of the senior compliance team, you will be responsible for ensuring all compliance across the Group. Ensuring all legislation is met and properties are safe and compliant.
The role oversees field based building safety and compliance teams that are based nationally. The role can be worked on a hybrid/remote basis with alignment to a local office including travel as required.

BENEFITS
Not only does this role offer a competitive salary, and car allowance, but it also offers a range of other benefits, including: a pension scheme, health and well-being plans, discounted products and services, counselling, family-friendly arrangements, tax efficient benefits and generous annual leave.

RESPONSIBILITIES
As Head of Building Safety and Compliance Manager you will:-

•Manage the Building Safety Team and ensure compliance with the Building Safety Act
•Manage the compliance for all properties to include high rise buildings ensuring the adherence to the Building Safety Act
•Managing a team of c 10 people within the Compliance team
•Deliver the strategic plan across the Group through managing and developing your teams, building relationships, and working with key stakeholders
•Take the lead on developing, delivery and maintenance of the national framework of compliance
•Keep up to date and informed with emerging legislation and technologies to manage risks
•Ensure a zero-tolerance policy to non-conformance is maintained
•Be responsible for reporting and analysis providing assurance to the Executive team and the Board

REQUIREMENTS

As Head of Building Safety and Compliance Manager you will have:-

•Significant experience working for a Housing Association or Local authority in a senior leadership role
•Strong strategic leadership experience with substantial experience of managing geographically dispersed teams
•Strong communication skills with proven experience of senior stakeholder liaison and relationship building including report writing and analysis for the Board and Executive
•Qualifications to include CIOB Level 6, RICS, NEBOSH, and experience with high-rise buildings would be highly desirable
•Previous experience in a similar role with knowledge of the Building Safety Act with strong technical knowledge
•Previous experience of Contractor management
•Full driving licence with the flexibility to travel nationally to meetings and offices as required

If you are interested in the Head of Building Safety and Compliance Manager apply with you CV today! Our team will review your application to see if it’s a match and get in touch to learn more about you. If you aren't contacted within 7 days, please assume your application was not selected.

Why wait? Don’t miss out. Apply today!

Experienced Quality & Innovation Advisor required to join a leading civils contractor supporting their Business Development and SHEQ team throughout the business. Providing support across a number of frameworks, encouraging continuous improvement and pushing for development throughout the business from their Head Office based in Bristol.

Reporting to the Head of Quality and Innovation working closely with the Head of SHEQ, you will be responsible for the improvement of the Safety, Health, Environment & Quality standards, Coordinating events, ensuring the organisation remains on track with their long term business plan, whilst offering innovative ideas to ensure the business is performing were it needs to be with regards to SHEQ & Social value standards.

This Quality & Innovation Advisor role is with a busy nationwide contractor group, with a turnover more than £90m, and secured workload in the Earthworks, Demolition & Energy Sector. Projects range in size from the smaller £500K up the £15M in value. This is an ideal opportunity for a recent construction graduate looking to work regionally and develop their skill-set within a business.

Key attributes include knowledgeable within the construction sector, ability to communicate confidently both written and verbal, driven and motivate to succeed and improve. High standards, attention to detail and the drive will be very well rewarded with excellent salary, benefits, promotional and development prospects. For more information please contact Claire spiers in our Southampton office on 07749578588 or email an updated CV to cspiers@fr-group.co.uk.

Quality Lead
Job no: Work type: Permanent - Full time Location: Regional NSW Categories: Project Management, Engineering, Health, Safety, Environment & Quality

ABOUT US
This is an exciting time to join Ertech as we continue to grow our capability.  We are an Australian civil and electrical construction business that delivers services to a diverse range of industries including the private and public sector, state and federal governments across Australia.
We are self-performers who have been doing this for more than forty years and take immense pride in the work we produce and the long-standing relationships we build.
WHAT WE OFFER

Competitive remuneration, including Site uplift
Site allowance for any
Metro projects - spend more time at home
Long-term permanent employment with career growth and progression
Discounted Private Health HBF & Medibank


... Click here to view more detail / apply for Quality Lead

04th November,
The opportunity This is a fantastic opportunity for experienced an Audit Intermediate looking to join our growing firm and build a long-term career with Nexia.    The role

Complete audit engagements, including planning, performing and finalising
Establish and maintain strong relationships with clients
Constructing and maintaining accurate working papers
Provide regular progress reports to the Audit Management Team
Support all team members and the Audit Partners
About you

1-2 years experience as an Auditor at a Graduate/Intermediate level
Completed a Commerce/Business degree majoring in Accounting
Undertaking the CA Program studies or partial completion of CA/CPA studies
Good knowledge of accounting/auditing standards and methodology; and the financial reporting requirements for different entities
Strong organisational and time management skills
Excellent communication and interpersonal skills as you will be working directly with our clients

... Click here to view more detail / apply for Audit Intermediate | Audit & Assurance

Position Summary

The Analyst, Client Due Diligence Team, will assist in executing the client due diligence and acceptance program in line with stated AML / ATF / Sanctions policies and procedures. This includes conducting client due diligence reviews and conducting ongoing derogatory news monitoring. This role will support the Program Manager, Client Due Diligence Team, in providing AML subject matter expertise and guidance to Visa clients and businesses.

 

Job Responsibilities

• Execute the CDD Center program in accordance with AML Policies and Procedures.

• Perform periodic AML / ATF client due diligence reviews of existing clients and applicants in accordance with the Global AML / ATF and Sanctions Policy and in the Client Due Diligence and Acceptance Procedures. 

• Actively works with clients to identify potential AML program element gaps and remediation plans.

• Perform ongoing monitoring of Visa clients.

• Ensure close communication and information sharing with client teams.

• Participate in AML/Sanctions and Compliance team meetings.

This is a hybrid position. Hybrid employees can alternate time between both remote and office. Employees in hybrid roles are expected to work from the office 2-3 set days a week (determined by leadership/site), with a general guidepost of being in the office 50% or more of the time based on business needs.

BINGO is a fully integrated recycling and resource management company that provides solutions across the entire waste management supply chain in Queensland, New South Wales and Victoria. BINGO is at an exciting chapter of its growth journey. Together, we're going to drive change, get inventive and shape the future of our industry. We're going to make Australia waste free, for all of us.  BINGO industries are looking for our newest Control Room Operator this is an exciting opportunity working on Day Shift out of Orchard Hills.   Role & Responsibilities: 

Loads inspection through PTZ camera on the floor, identify any non-conforming waste and ensuring oversized materials that may block up the plant are removed from main stockpile and do not enter pits
Ensure materials are allocated to the right tipping locations
Managing the tip floor process so that material codes are accurate and following

... Click here to view more detail / apply for Control Room Operator