Total 13 Junior Executive level Quality Assurance / Control job vacancies in New Cumberland PA Branch

Under the general direction of the Principal Inspector or Supervisory Principal Inspector accomplishes the following duties:

A. Technical Administration

On a continuing basis, ensures assigned organizations are properly and adequately organized, staffed and equipped; establishes and conducts adequate training programs; maintains record keeping systems; and facilities and ensures procedures meet all regulatory requirements.

Chairs joint Federal Aviation Administration (FAA) and industry meetings. Maintains regular contact with organizations assigned and coordinates with top management officials. Requires or directs correction of any deficiencies/discrepancies and refuses or withdraws approval if they cannot be resolved.

Responsible for conducting enforcement investigations and preparation of final reports and recommendations on disposition. Performs or supervises the emergency suspension of certificates or cancellation of operations specifications. Conducts or directs the reexamination of certificated airmen or recertification of an operator or agency.

Conducts investigations of public complaints, congressional inquiries, and aircraft incidents and accidents. Provides verbal and/or written technical assistance to legal counsel, testifies at court trials and formal hearings, and gives dispositions.

Coordinates minimum equipment list (MEL) approvals with the principal inspector. Takes enforcement action in instances of noncompliance with the MEL.

Coordinates with geographic inspectors for the accomplishment of non-routine air carrier surveillance.
Assists Principal Inspector in the planning and implementation of certificate holders surveillance via usage of the appropriate safety system.

B. Certification

Approves/accepts or disapproves/rejects manuals and revisions to such manuals. May require amendments to previously approved manuals to accomplish the following: correct any conflict with regulatory requirements; eliminate unsafe practices: and/or improve the specificity of instruction.

Evaluates training programs to ensure that they meet the requirements of 14 CFR. Approves or disapproves these training programs including flight simulators, training devices, or other such equipment used in these programs.

Approves/disapproves designation of check airmen and makes recommendations on the appointment of designees.
Evaluates operations and facilities by on-site inspections and review of reports by geographic inspectors or others. Negotiates changes essential or desirable in their policies and procedures. Determines the appropriate methods and/or plans for securing corrective action and determines through on-site inspection or inspector reports the effectiveness of any action.

Evaluates and approves/disapproves requests to operate under conditions not previously authorized and may prescribe additional conditions and limitations as appropriate.

Approves the original issuance of operations specifications and issues original operating certificates. Approves amendments to operations specifications. Evaluates the safety of proposed changes in route or airport authorizations; prescribes any changes required before approval.

Directs or participates in flight evaluations to determine compliance with 14 CFR. Recommends changes that will be required prior to approval.

Duties and Responsibilities continued below

AEDAS is a leading global design practice dedicated to creative excellence and diversity in the built environment. We are a global platform for the most talented architects and designers, focused upon delivering locally-celebrated solutions for cities, communities and clients. Our global network of 12 offices forms a diverse staff base with skills across all sectors in architecture, interior design, building consultancy, master planning, landscape and urban design.

To support our continuous growth and expansion in Asia, AEDAS Singapore is seeking a committed candidate for the following position:

DOCUMENT CONTROL ASSISTANT / DOCUMENT CONTROLLER

Responsibilities:

· To take direction from Document Control Manager

· To be able to work as a proactive team member

· Management & filing of all Project documentation (Outgoing & Incoming)

· Preparation of Document Issue Packages to meet Project stage deliverables as defined by the Project Team Leader

· Checking that all documents meet defined AEDAS standards before being transmitted, and to highlight non-compliances to team members responsible. i.e. File name & drawing nomenclature compliance (Checked against any earlier revisions).

· Maintenance of Electronic PDF in project folders reflecting:

o AEDAS “Current“ Documents (Drawings, Specifications, Reports)

o “Current” Documents from all other Consultants

o “Current” Documents from Contractors as Submission Packages documents

· Downloading, Internal distribution and eventually filing of contractor submissions

· Uploading of commented documents via Workflow

· Assistance in preparation of and updating the distribution matrix as and when required, and advising all changes as appropriate

· Production of Reports to include but not limited to;

o Incoming & Outgoing reports on a weekly basis

o Tracking registers to record receipt & return of submittals

o To maintain & manage RFI tracking lists

o To highlight to team leaders any late items not yet responded

o Other reasonable tasks as required by Doc Control Manager & Team leaders

Requirements:

· Document Control Assistant - 1 year of working experiences in Electronic Document Management System (EDMS) environments, such as Aconex, Procore & BIM360 Documents

· Document Controller - 4 years of working experiences in Electronic Document Management System (EDMS) environments, such as Aconex, Procore & BIM360 Documents

· To fully engage with the usage of Electronic Document Management System (EDMS) and any other electronic document control systems pertinent to a project.

· Illustrate a positive, proactive attitude

· Logical approach to work with a consistent attention to detail

· A full understanding of AEDAS IMS and its supporting documents

· Ability to cope with conflicting demands, to be able to proactively highlight any conflicts of priorities and suggest action plans to resolve issues

Please submit a copy of your updated CV including your current salary, expected salary and notice period to daisy.sim@aedas.com.

AEDAS is a leading global design practice dedicated to creative excellence and diversity in the built environment. We are a global platform for the most talented architects and designers, focused upon delivering locally-celebrated solutions for cities, communities and clients. Our global network of 12 offices forms a diverse staff base with skills across all sectors in architecture, interior design, building consultancy, master planning, landscape and urban design.

To support our continuous growth and expansion in Asia, AEDAS Singapore is seeking a committed candidate for the following position:

DOCUMENT CONTROL ASSISTANT / DOCUMENT CONTROLLER

Responsibilities:

· To take direction from Document Control Manager

· To be able to work as a proactive team member

· Management & filing of all Project documentation (Outgoing & Incoming)

· Preparation of Document Issue Packages to meet Project stage deliverables as defined by the Project Team Leader

· Checking that all documents meet defined AEDAS standards before being transmitted, and to highlight non-compliances to team members responsible. i.e. File name & drawing nomenclature compliance (Checked against any earlier revisions).

· Maintenance of Electronic PDF in project folders reflecting:

o AEDAS “Current“ Documents (Drawings, Specifications, Reports)

o “Current” Documents from all other Consultants

o “Current” Documents from Contractors as Submission Packages documents

· Downloading, Internal distribution and eventually filing of contractor submissions

· Uploading of commented documents via Workflow

· Assistance in preparation of and updating the distribution matrix as and when required, and advising all changes as appropriate

· Production of Reports to include but not limited to;

o Incoming & Outgoing reports on a weekly basis

o Tracking registers to record receipt & return of submittals

o To maintain & manage RFI tracking lists

o To highlight to team leaders any late items not yet responded

o Other reasonable tasks as required by Doc Control Manager & Team leaders

Requirements:

· Document Control Assistant - 1 year of working experiences in Electronic Document Management System (EDMS) environments, such as Aconex, Procore & BIM360 Documents

· Document Controller - 4 years of working experiences in Electronic Document Management System (EDMS) environments, such as Aconex, Procore & BIM360 Documents

· To fully engage with the usage of Electronic Document Management System (EDMS) and any other electronic document control systems pertinent to a project.

· Illustrate a positive, proactive attitude

· Logical approach to work with a consistent attention to detail

· A full understanding of AEDAS IMS and its supporting documents

· Ability to cope with conflicting demands, to be able to proactively highlight any conflicts of priorities and suggest action plans to resolve issues

Please submit a copy of your updated CV including your current salary, expected salary and notice period to daisy.sim@aedas.com.

Responsibilities:

- Perform test activities such as running tests, obtaining and analyzing.

- test results, and checking and tracking defects.

- Develop test procedures based on tests designed according to requirements.

- Maintain existing test artifacts and report to test lead.

- Prepare document and create a daily activity report.

- Coordination and communication with related parties of project related items.

- Maintain relationships with project teams and clients.

- Maintain adequate security controls for documents.

Requirements:

- Experience in Banking domain, Scrum, JIRA.

- 6 months to 1 year of working experience in Software Application Testing.

- Understanding of Software Development Life Cycle (SDLC).

- Experience in designing test cases, test execution and log defect in JIRA.

- Fast Learner

- Good in communication
- Fresh Graduate with 6 months internship in testing is welcome

By submitting your curriculum vitae or personal data to us in connection with your job application, you are deemed to have given your consent to GienTech Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data in accordance with the Personal Data Protection Act (“PDPA”). If you wish to withdraw your consent, please drop us an email to let us know.

Interested applicants are invited to apply directly at the NUS Career Portal.

Your application will be processed only if you apply via NUS Career Portal.

We regret that only shortlisted candidates will be notified.

Job Description

AI Singapore (AISG) is a national AI programme launched by the National Research Foundation (NRF) to anchor deep national capabilities in Artificial Intelligence (AI).

The programme office is hosted by the National University of Singapore (NUS) and brings together all Singapore-based research institutions and the vibrant ecosystem of AI start-ups and companies developing AI products to perform use-inspired research, grow the knowledge, create the tools, and develop the talent to power Singapore's AI efforts.

We are seeking a part time staff who can assist in data creation, evaluating the collected data’s reliability, validity, and accuracy and improving the data quality.

Duties & Responsibilities

• Assisting with translation and data creation in Burmese language so proficiency in Burmese is a must.
• Evaluating the collected data’s reliability, validity and accuracy
• Verifying data by cross-checking with other sources
• Making recommendations for improving data quality

Qualifications

• Proficiency in Burmese as well as knowledge in Burmese culture due to usage of Burmese language for data collection and creation.
• Able to commit to the project for 6 months
• A Bachelor’s degree in any discipline

AEDAS is a leading global design practice dedicated to creative excellence and diversity in the built environment. We are a global platform for the most talented architects and designers, focused upon delivering locally-celebrated solutions for cities, communities and clients. Our global network of 12 offices forms a diverse staff base with skills across all sectors in architecture, interior design, building consultancy, master planning, landscape and urban design.

To support our continuous growth and expansion in Asia, AEDAS Singapore is seeking a committed candidate for the following position:

DOCUMENT CONTROL ASSISTANT / DOCUMENT CONTROLLER

Responsibilities:

· To take direction from Document Control Manager

· To be able to work as a proactive team member

· Management & filing of all Project documentation (Outgoing & Incoming)

· Preparation of Document Issue Packages to meet Project stage deliverables as defined by the Project Team Leader

· Checking that all documents meet defined AEDAS standards before being transmitted, and to highlight non-compliances to team members responsible. i.e. File name & drawing nomenclature compliance (Checked against any earlier revisions).

· Maintenance of Electronic PDF in project folders reflecting:

o AEDAS “Current“ Documents (Drawings, Specifications, Reports)

o “Current” Documents from all other Consultants

o “Current” Documents from Contractors as Submission Packages documents

· Downloading, Internal distribution and eventually filing of contractor submissions

· Uploading of commented documents via Workflow

· Assistance in preparation of and updating the distribution matrix as and when required, and advising all changes as appropriate

· Production of Reports to include but not limited to;

o Incoming & Outgoing reports on a weekly basis

o Tracking registers to record receipt & return of submittals

o To maintain & manage RFI tracking lists

o To highlight to team leaders any late items not yet responded

o Other reasonable tasks as required by Doc Control Manager & Team leaders

Requirements:

· Document Control Assistant - 1 year of working experiences in Electronic Document Management System (EDMS) environments, such as Aconex, Procore & BIM360 Documents

· Document Controller - 4 years of working experiences in Electronic Document Management System (EDMS) environments, such as Aconex, Procore & BIM360 Documents

· To fully engage with the usage of Electronic Document Management System (EDMS) and any other electronic document control systems pertinent to a project.

· Illustrate a positive, proactive attitude

· Logical approach to work with a consistent attention to detail

· A full understanding of AEDAS IMS and its supporting documents

· Ability to cope with conflicting demands, to be able to proactively highlight any conflicts of priorities and suggest action plans to resolve issues

Please submit a copy of your updated CV including your current salary, expected salary and notice period to gwendolyn.loh@aedas.com.

Interested applicants are invited to apply directly at the NUS Career Portal.

Your application will be processed only if you apply via NUS Career Portal.

We regret that only shortlisted candidates will be notified.

Job Description

This position involves working on a project related to climbing robots and their application for port operations. The objective of this position includes developing a climbing robot control system and designing the corresponding hardware, to control a climbing robot can climb on the containers and function as a lashing bar. The role involves the opportunity to work with the research team within National University of Singapore in which the team leaders are from the Department of Mechanical Engineering, alongside Specialists from a high technology company. The successful candidate will be self-motivated with an outstanding track record in robotics, control, computer science, or related disciplines. The main research tasks for the project include but will not be limited to:

• Designing and developing electronics hardware for an articulated vertical climbing robot.

• Implementing the control system on hardware and conducting tests in real-world outdoor environments

Qualifications

• Good coding skills in C/C++

• Experience with hardware and electronics/circuit design

• Experience with embedded system (Arduino, STM32, etc.)

• Literature review/summarizing skills

• Good writing/spoken communication skills

AEDAS is a leading global design practice dedicated to creative excellence and diversity in the built environment. We are a global platform for the most talented architects and designers, focused upon delivering locally-celebrated solutions for cities, communities and clients. Our global network of 12 offices forms a diverse staff base with skills across all sectors in architecture, interior design, building consultancy, master planning, landscape and urban design.

To support our continuous growth and expansion in Asia, AEDAS Singapore is seeking a committed candidate for the following position:

DOCUMENT CONTROL ASSISTANT / DOCUMENT CONTROLLER

Responsibilities:

· To take direction from Document Control Manager

· To be able to work as a proactive team member

· Management & filing of all Project documentation (Outgoing & Incoming)

· Preparation of Document Issue Packages to meet Project stage deliverables as defined by the Project Team Leader

· Checking that all documents meet defined AEDAS standards before being transmitted, and to highlight non-compliances to team members responsible. i.e. File name & drawing nomenclature compliance (Checked against any earlier revisions).

· Maintenance of Electronic PDF in project folders reflecting:

o AEDAS “Current“ Documents (Drawings, Specifications, Reports)

o “Current” Documents from all other Consultants

o “Current” Documents from Contractors as Submission Packages documents

· Downloading, Internal distribution and eventually filing of contractor submissions

· Uploading of commented documents via Workflow

· Assistance in preparation of and updating the distribution matrix as and when required, and advising all changes as appropriate

· Production of Reports to include but not limited to;

o Incoming & Outgoing reports on a weekly basis

o Tracking registers to record receipt & return of submittals

o To maintain & manage RFI tracking lists

o To highlight to team leaders any late items not yet responded

o Other reasonable tasks as required by Doc Control Manager & Team leaders

Requirements:

· Document Control Assistant - 1 year of working experiences in Electronic Document Management System (EDMS) environments, such as Aconex, Procore & BIM360 Documents

· Document Controller - 4 years of working experiences in Electronic Document Management System (EDMS) environments, such as Aconex, Procore & BIM360 Documents

· To fully engage with the usage of Electronic Document Management System (EDMS) and any other electronic document control systems pertinent to a project.

· Illustrate a positive, proactive attitude

· Logical approach to work with a consistent attention to detail

· A full understanding of AEDAS IMS and its supporting documents

· Ability to cope with conflicting demands, to be able to proactively highlight any conflicts of priorities and suggest action plans to resolve issues

Please submit a copy of your updated CV including your current salary, expected salary and notice period to gwendolyn.loh@aedas.com.

AEDAS is a leading global design practice dedicated to creative excellence and diversity in the built environment. We are a global platform for the most talented architects and designers, focused upon delivering locally-celebrated solutions for cities, communities and clients. Our global network of 12 offices forms a diverse staff base with skills across all sectors in architecture, interior design, building consultancy, master planning, landscape and urban design.

To support our continuous growth and expansion in Asia, AEDAS Singapore is seeking a committed candidate for the following position:

DOCUMENT CONTROL ASSISTANT / DOCUMENT CONTROLLER

Responsibilities:

· To take direction from Document Control Manager

· To be able to work as a proactive team member

· Management & filing of all Project documentation (Outgoing & Incoming)

· Preparation of Document Issue Packages to meet Project stage deliverables as defined by the Project Team Leader

· Checking that all documents meet defined AEDAS standards before being transmitted, and to highlight non-compliances to team members responsible. i.e. File name & drawing nomenclature compliance (Checked against any earlier revisions).

· Maintenance of Electronic PDF in project folders reflecting:

o AEDAS “Current“ Documents (Drawings, Specifications, Reports)

o “Current” Documents from all other Consultants

o “Current” Documents from Contractors as Submission Packages documents

· Downloading, Internal distribution and eventually filing of contractor submissions

· Uploading of commented documents via Workflow

· Assistance in preparation of and updating the distribution matrix as and when required, and advising all changes as appropriate

· Production of Reports to include but not limited to;

o Incoming & Outgoing reports on a weekly basis

o Tracking registers to record receipt & return of submittals

o To maintain & manage RFI tracking lists

o To highlight to team leaders any late items not yet responded

o Other reasonable tasks as required by Doc Control Manager & Team leaders

Requirements:

· Document Control Assistant - 1 year of working experiences in Electronic Document Management System (EDMS) environments, such as Aconex, Procore & BIM360 Documents

· Document Controller - 4 years of working experiences in Electronic Document Management System (EDMS) environments, such as Aconex, Procore & BIM360 Documents

· To fully engage with the usage of Electronic Document Management System (EDMS) and any other electronic document control systems pertinent to a project.

· Illustrate a positive, proactive attitude

· Logical approach to work with a consistent attention to detail

· A full understanding of AEDAS IMS and its supporting documents

· Ability to cope with conflicting demands, to be able to proactively highlight any conflicts of priorities and suggest action plans to resolve issues

Please submit a copy of your updated CV including your current salary, expected salary and notice period to gwendolyn.loh@aedas.com.

Job Position Summary

Reporting to the General Manager, the main responsibility of the quality assistant is to facilitate the administrative process of their respective departments by providing administrative support and documentation of information, adhering to SOPs

Key Roles and Responsibilities

Conduct checks on FML vessels for audit risk/adequacy of navigation/security infrastructure

• Responsible for reporting on areas of audit risk/adequacy of navigation/security infrastructure

• Collaborate with vessel crew to conduct checks on areas of audit risk/adequacy of navigation/security infrastructure as assigned by Head, Operational Excellence/Head, Compliance and Vessel Audit/Head Navigation and Environmental Compliance

• Present findings from checks to Head, Operational Excellence/Head, Compliance and Vessel Audit/Head Navigation and Environmental Compliance to inform business decisions

Maintain proper documentation and storage of information

• Responsible for the proper documentation and storage of information within the department

• Document information as directed by Head, Operational Excellence/Head, Compliance and Vessel Audit/Head Navigation and Environmental Compliance to ensure proper governance and recording of important information

• Maintain and store of all important physical or e-documents within the department in an organized manner

Execute continuous improvement initiatives within the department

• Responsible for executing continuous improvement initiatives within the department

• Collaborate with Head, Vetting & Performance/Head, Investigation and employees within the department to identify improvements that can be made to policies, processes or technological infrastructure.

• Execute continuous improvement initiatives within the department in accordance to developed plans

• Provide regular updates on progress of continuous improvement initiatives, as well as adherence to timeline and budget to Head, Vetting & Performance/Head, Investigation

Day-to-day operations

• Responsible for the provision of administrative support to the department

• Respond to queries or requests for administrative support within the department in a swift manner, in accordance to developed SOPs

Relationship

Internal:

· Primarily maintains relationships with Head, Operational Excellence/Head, Compliance and Vessel Audit/Head Navigation and Environmental Compliance and colleagues

· Collaborates with Head, Operational Excellence/Head, Compliance and Vessel Audit/Head Navigation and Environmental Compliance and colleagues to ensure administrative support is provided to the departments

Job Experience, Functional Knowledge and Qualifications

• Min 3 years work experience in the Maritime Industry

• Strong understanding of ship chartering operations

• Degree in Maritime or relevant field

Competencies

Level One Competencies

Effective decision-making

· Analysis & Problem Solving

Interacting with others

· Collaboration, inclusion & teamwork

· Listening and communicating

Driving high quality

· Customer focus

· Planning & organizing

· Initiative

· Accountability

Interested applicants are invited to apply directly at the NUS Career Portal.

Your application will be processed only if you apply via NUS Career Portal.

We regret that only shortlisted candidates will be notified.

Job Description

The National University of Singapore invites applications for Research Assistant/ Research Associate (QC Analytical Chemist) in the Department of Clinical Imaging Research Centre (CIRC) Yong Loo Lin School of Medicine. CIRC is a dedicated molecular imaging research centre. It is equipped with on-site capability for the preparation of PET radiopharmaceuticals in a state-of-the-art GMP-certified facility. CIRC is positioned to support both academic and commercially led clinical research programs, with dedicated clinical imaging facilities area advanced modalities of PET-CT and PET-MRI. For more details on what we do, do visit https://medicine.nus.edu.sg/circ/. Appointments will be made on a two-years contract basis with the possibility of extension.

Purpose of the post

The QC Analytical Chemist will be responsible to, and work closely with Head of QC, to ensure the successful and safe release of radiopharmaceuticals manufactured at CIRC. The QC Analytical Chemist’s principal role will be to perform all quality control tests required by pharmacopeia. Alongside with maintaining the inventory of raw materials, maintenance of equipment and all the necessary documentation required for the QC laboratory in compliance to PIC/S GMP.

Main Duties and Responsibilities

The QC Analytical Chemist will be able to:

• Perform analytical chemistry methods (HPLC, GC, radioTLC etc) for ensuring that the radiopharmaceutical is safe for clinical use.
• Perform environmental monitoring as required by PIC/S GMP in the cleanrooms (environmental monitoring, airborne particle monitoring)
• Manage routine microbial tests such as microbial plate incubation, sterility testing, bioburden testing, etc and liaising with third party contractors if required.
• Handle raw materials management, including maintaining inventory status, purchase and receiving of raw materials.
• Establish, develop and validate QC Test Methods for the radiopharmaceutical QC release testing.
• Assist in writing Standard Operating Procedures (SOPs), Work Instructions (WIN), Recordsheets (REC), etc and fill in Batch Manufacturing Records (BMR).
• Ensure that the appropriate documentation is in place.
• Support in managing of QC equipment and metabolite laboratory equipment, including qualifications, operations maintenance, cleaning, calibration and re-qualification.
• Maintain cleanliness in the QC laboratory and the cyclotron facility.
• Handle chemical and biohazard waste disposal.

Main Duties and Responsibilities

• Adhere to good safety and health practices from the university guidelines.
• Cross training to Production routine manufacturing of radiopharmaceuticals
• Any adhoc duties as required for this role

Physical Demands and Work Environment

Personnel should be comfortable with:

• exposure to radiation when handling radioactive samples.

• handling of chemicals for QC testing (flammables, acids, and bases).

• Handling chemical and biohazard wastes

• Occasion lifting of heavy objects such as lead shield containment (lead pots)

• Flexible working hours with occasionally over time

Qualifications

The applicant should:

1. Have a minimum of BSc degree in Chemistry, Biochemistry, pharmacy or a related field;
2. Good knowledge and experience on GMP (Good Manufacturing Practice) or GLP (Good Laboratory Practice);
3. Preferably hands-on experience with operating and maintaining analytical instruments such as HPLC, GC, TLC and also aseptic isolator for sterility testing.
4. Have good analytical processing skills, as well as,
5. Have good critical thinking and proactiveness at work.

Remuneration will be commensurate with the candidate’s qualifications and experience.

Formal application: Please submit your application, indicating current/expected salary, supported by a detailed CV (including personal particulars, academic and employment history, complete list of publications/oral presentations and full contacts of two (2) referees to this job portal.

Interested applicants are invited to apply directly at the NUS Career Portal.

Your application will be processed only if you apply via NUS Career Portal.

We regret that only shortlisted candidates will be notified.

Job Description

• The Research Assistant will work closely with the Principal Investigator on several research projects on using machine learning in chemical and control engineering problems
• The Research Assistant will help to develop machine learning models for both theory and applications in advanced control systems

Job Requirements

• A Bachelor degree in a relevant area, e.g., Chemical Engineering, Control Engineering, Computer Science, Chemistry, etc.
• Experienced in machine learning, optimization and programming languages (e.g., python, Matlab, C++, etc)
• Any experience with 1) advanced control, 2) machine learning theory and applications, and 3) chemical engineering and chemistry is a plus