Total 36 Maintenance / Repair job vacancies in Singapore Changi

Job Description

• Perform maintenance of material handling equipment, forklift, tractors, equipment and various systems at cargo airfreight terminals.
• Perform troubleshooting function and undertake basic repair work.
• Work with vendor to ensure operation not disrupted due to breakdown of equipment.

Job Requirements:

• Nitec in Electrical Engineering or equivalent
• Able to work in harsh environments such as cold rooms, high humidity, wet conditions, steamy environment and high ground
• Able to work on rotating shifts

EA Personnel Name: Nicholas Poh
EA Personnel No: R24123432
EA License No: 16C8443

Job Description:

• Perform functional and aesthetic inspection of aircraft cabin interiors.

• Document any defects, perform troubleshooting and carry out rectification.

• Support cabin modification, retrofitting and component repair tasks.

• Any other duties as assigned by the supervisor

Requirements:

• NITEC / Higher NITEC, preferably in an Engineering discipline

• At least minimum 2 years of relevant aircraft cabin maintenance experience

• Able to work flexible hours, including weekends and public holidays (rotating shift hours)

• Carry out maintenance, diagnosis, and repair of electrical, automation, and instrumentation of equipment applied by industrial motor controls, chemical feed systems, pump drives, and the Supervisory Control and Data Acquisition (SCADA) system
• Perform maintenance, repair, and upgrade of the Water Supply Division’s electrical distribution infrastructure
• Carry out thermography of electrical distribution panels and motor control
• Troubleshoot problems by gathering and analyzing power quality data
• Ensure longer life of obsolete equipment and save funds by carrying out detailed troubleshooting down to component levels
• Perform maintenance, installation, repair, and troubleshooting of control centers, de-energized higher voltage equipment, and 480 volt motors
• Repair and maintain engine generators and carry out work on related control circuit equipment
• Carry out maintenance, repair, and installation of building circuits and similar equipment
• Perform maintenance of alarm and SCADA systems, electrical pneumatic and electronic controls, programmable controls, and other similar equipment
• Carry out necessary carpentry, welding, valve repair, cement, and pipe fitting work
• Prepare reports, maintain records, and requisition supplies and parts
• Inspect and supervise work done by external vendors.

This is a traineeship program that will offer an opportunity for ITE or Diploma fresh graduates to obtain knowledge from structured training and OJT to gain work experience that will accelerate their technical competency and career progression in GE Aerospace.

The trainee will perform visual and dimensional inspection to written quality plans on incoming in-process and finished engine components. 

Essential Responsibilities:

• Ensure quality of parts meet specification requirements
• Ensure proper work clearance, correctness, and completeness
• Prevent non-conforming parts from proceeding to the next work station
• Provide support to Manufacturing Engineers and Quality System Engineers for evaluations, audits related activities
• Collect data, feedback on the quality of parts inspected to the Manufacturing Engineers and Quality System Engineers
• Perform visual & dimensional inspections, and set area management of the parts
• Perform scheduled maintenance & housekeeping task

Qualifications/Requirements:

• Nitec/Higher Nitec in Automation Engineering / Aircraft Engines Maintenance / Mechanical Engineering / Mechatronics Engineering / Aircraft Maintenance Engineering
• Diploma in Aerospace Engineering / Mechatronics / Aeronautical Engineering / Aerospace Technology / Aerospace Avionics
• Any relevant Nitec / Higher Nitec / Diploma engineering courses
• Able to read & write English at a professional working proficiency level
• Able to work rotating shifts
• Computer literacy in Microsoft Office
• Willing to accept a 1-year bond after the program
• Within 3 years of graduation OR the operationally ready date (ORD) for national servicemen
• Singaporean/Singapore PR only in order to meet Singapore government requirements for a strong Singapore core and for the Singapore government grants to be applicable.

Desired Characteristics:

• A team player
• Humble: respectful, receptive, agile, eager to learn
• Transparent: shares critical information, speaks with candor, contributes constructively
• Focused: quick learner, strategically prioritizes work, committed
• Leadership ability: strong communicator, decision-maker, collaborative
• Problem solver: analytical-minded, challenges existing processes, critical thinker

This is a traineeship program that will offer an opportunity for ITE or Diploma fresh graduates to obtain knowledge from structured training and OJT to gain work experience that will accelerate their technical competency and career progression in GE Aerospace.

The trainee will perform Non-Destructive Testing and its related duties in accordance with the written instructions and specific calibration requirements.

Essential Responsibilities:

• Perform specific calibrations, NDT, and specific evaluations for acceptance or rejection of parts
• Correct interpretation and understand the inspection operation sheets and work instruction
• Organize, sort and prepare the parts for NDT inspection
• Load, unload, and operate either the real-time XR, UT or auto FPI line effectively
• Perform either X-Ray Inspection, Ultrasonic Inspection, Fluorescent Penetrant Inspection, Eddy Current Inspection, Magnetic Particles Inspection in accordance with the inspection operation sheets
• Ensure the equipment operation readiness always
• Assist the Engineer for any inspection evaluation and reporting
• Upkeep of process system and testing equipment to ensure its continuous operations in compliance to approved documents
• Prepare and clean parts before and/or after inspection
• Conduct audits in NDT area to ensure continuous system compliance to meet regulatory agencies requirements
• Perform scheduled maintenance & housekeeping tasks

Qualifications/Requirements:

• Nitec/Higher Nitec in Automation Engineering / Aircraft Engines Maintenance / Mechanical Engineering / Mechatronics Engineering / Aircraft Maintenance Engineering
• Diploma in Aerospace Engineering / Mechatronics / Aeronautical Engineering / Aerospace Technology / Aerospace Avionics
• Any relevant Nitec / Higher Nitec / Diploma engineering courses
• Able to read & write English at a professional working proficiency level
• Able to work rotating shifts
• Willing to accept a 1-year bond after the program
• Within 3 years of graduation OR the operationally ready date (ORD) for national servicemen
• Singaporean/Singapore PR only in order to meet Singapore government requirements for a strong Singapore core and for the Singapore government grants to be applicable.

Desired Characteristics:

• A team player
• Humble: respectful, receptive, agile, eager to learn
• Transparent: shares critical information, speaks with candor, contributes constructively
• Focused: quick learner, strategically prioritizes work, committed
• Leadership ability: strong communicator, decision-maker, collaborative
• Problem solver: analytical-minded, challenges existing processes

This is a traineeship program that will offer an opportunity for ITE or Diploma fresh graduates to obtain knowledge from structured training and OJT to gain work experience that will accelerate their technical competency and career progression in GE Aerospace.

The trainee will be responsible for all related operations for automated welding & laser machines.

Essential Responsibilities:

• The job requires the candidate to take internal/external exams & periodic proficiency exams.
• Perform set-up, calibration, programming, operation of automated welding, or laser machining that meets engine component repair requirements.
• Perform scheduled maintenance, housekeeping & process control of the machines and associated processes.
• Assist in process improvement and/or development, including but not limited to fixture design, programming, and machine maintenance.
• Carry out on-job-training for other employees.

Qualifications/Requirements:

• Nitec/Higher Nitec in Automation Engineering / Aircraft Engines Maintenance / Mechanical Engineering / Mechatronics Engineering / Aircraft Maintenance Engineering
• Diploma in Aerospace Engineering / Mechatronics / Aeronautical Engineering / Aerospace Technology / Aerospace Avionics
• Any relevant Nitec / Higher Nitec / Diploma engineering courses
• Able to read & write English at a professional working proficiency level.
• Able to work rotating shifts.
• Willing to accept a 1-year bond after the program.
• Within 3 years of graduation OR the operationally ready date (ORD) for national servicemen
• Singaporean/Singapore PR only in order to meet Singapore government requirements for a strong Singapore core and for the Singapore government grants to be applicable.

Desired Characteristics:

• A team player
• Humble: respectful, receptive, agile, eager to learn
• Transparent: shares critical information, speaks with candor, contributes constructively
• Focused: quick learner, committed
• Leadership ability: strong communicator, decision-maker, collaborative
• Problem solver: analytical-minded, challenges existing processes

This is a traineeship program that will offer an opportunity for ITE or Diploma fresh graduates to obtain knowledge from structured training and OJT to gain work experience that will accelerate their technical competency and career progression in GE Aerospace.

The trainee will be responsible to set up and operate machines such as CNC machines in Milling, Grinding and Lathe; Electrical Discharge Machine (EDM); Surface Grinding; VT Lathe and various conventional machines and specialized equipment to perform machining operations. 

Essential Responsibilities:

• Set up and operate all types of conventional or CNC machines such as electrical discharge machine, laser machine, lathe, radial grinder, reciprocal grinder, milling machine, drilling machine, and specialized equipment to perform machining operation of the most complicated nature in the making of jigs, fixtures, tools, dies, gauges, test equipment and product parts, and their rework or modifications
• May follow a particular product through the machine shop using a variety of machine tools to complete the finished product
• Use all types of standard and special gauges, various hand tools
• Maintain pertinent records; work according to technical drawings and instructions
• Perform scheduled maintenance & housekeeping tasks
  

Qualifications/Requirements:

• Nitec/Higher Nitec in Automation Engineering / Aircraft Engines Maintenance / Mechanical Engineering / Mechatronics Engineering / Aircraft Maintenance Engineering
• Diploma in Aerospace Engineering / Mechatronics / Aeronautical Engineering / Aerospace Technology / Aerospace Avionics
• Any relevant Nitec / Higher Nitec / Diploma engineering courses
• Able to read and understand the manufacturing operation sheets and standard operation procedures in English
• Able to work rotating shifts
• Willing to accept a 1-year bond after the program
• Within 3 years of graduation OR the operationally ready date (ORD) for national servicemen
• Singaporean/Singapore PR only in order to meet Singapore government requirements for a strong Singapore core and for the Singapore government grants to be applicable.

Desired Characteristics:

• Good mechanical aptitude
• A team player
• Humble: respectful, receptive, agile, eager to learn
• Transparent: shares critical information, speaks with candor, contributes constructively
• Focused: quick learner, strategically prioritizes work, committed
• Leadership ability: strong communicator, decision-maker, collaborative
• Problem solver: analytical-minded, challenges existing processes

RESPONSIBILITIES

• General electrical fitting work including installation of electrical equipment, electrical cabling works, cable trucking, cable conduit and termination, etc
• Maintenance of M&E equipment
• Troubleshooting of electrical system
• Troubleshooting and repair works for air conditioning system (Single Split, Multi Split & VRV)
• Installation of air conditioning system
• On-site maintenance of Air-con and MV system
• Preparation of service reports
• Attending urgent calls during & after office hours
• Any duties as assigned by supervisor

JOB REQUIREMENTS

• Minimum 2 years hand-on experience in maintenance, troubleshooting and installation in electrical systems
• Must be able to install GI trunking and conduits works.
• Minimum 2 years hand-on experience in maintenance, troubleshooting and repair works in ACMV system
• Must have knowledge of Air-con DX system and Chilled water system.
• MUST have Coretrade certificate.
• Basic maintenance knowledge of M&E systems.
• Valid class 3 driving licence is preferred.
• Working location: Island-wide Singapore
• Working hours: Monday to Saturday (8:30 am to 5:30 pm)

PURPOSE OF THE ASSIGNMENT

Within the Material & Services branch in Singapore, the Repair Order Administrator is responsible to oversee the day-to-day operation of the repair services administration and expediting work.

OVERALL OBJECTIVES

The Repair Order Administrator is contributing to management of Aerospace Material repaired with vendors based in Asia region. Assurance of parts availability is their primary objective. The Repair Order Administrator will work in a fast-paced environment with key responsibility to provide repaired materials in the most efficient and effective manner possible.

MAIN INTERFACES

Internal:

Regional Service Center / Logistics Center Managers for Asia

CDG and SIN Logistics Centers staff

Customer Support Officer and Customer Support Expert in France

Customer Support Manager in France

Outsourced repair department in France

Purchasing Department in France

Shop engineering officer in France

AOG Desk in France

External:

Aerospace MRO providers including Asian AFI KLM E&M MRO joint ventures and subsidiaries.

Logistic Service Provider

KEY RESPONSIBILITIES

The Repair Administrator is responsible for:

- Repair Order creation and dispatch

- Follow the repair logistics flow and assist in resolution of shipping issues to ensure parts shipped/arrived in a timely manner

- Approve the quotation of its perimeter with support if needed of the Technical department

- Manage the day-to-day Repair administration and warranty operation

- Monitor the lead time of repair to fulfill customer or inventory requirements

- Track repair cost/SPT versus contract price/SPT where applicable to ensure vendor compliance

- Administrate the weekly status reports from vendors and record the information in the relevant IT Tools (currently Base RPEX) once a week at a minimum

- Update all IT Tools (Astre, Base RPEX, GOLD, ….) in a timely manner to provide reliable datas to internal and external customers

- Apply the Repair or Buy process

- Record Customer Induced Damage claims

- Monitor and clear invoicing issues

- Monitor and clear the discrepancies after reception in coordination with the relevant Quality Controller

- Archive all files in accordance with regulations and internal processes

- Regular vendor review and teleconference

- Perform tasks/functions assigned by manager

The responsibilities and tasks of the position are not limited to the above mentioned and change might occur in concert with direct Manager.

JOB DIMENSIONS

Position based in SIN – ALPS Avenue (Changi Airport Logistic Park Of Singapore)

Staff: N/A

Tools: Microsoft Office and Outlook, Air France internal IT

Normal Shift - 9.00am to 6.00pm on 5 -Day Week

CONTEXT/ENVIRONMENT

The Repair Order Administrator is in the Customer Service Team in the Material & Services Directorate of Air France Industries. The Business Unit is supporting Customers on Flight Hours Services, closed loop long-term contracted customers in Asia (APAC and India) and has to provide Material in serviceable condition to respect its contractual obligations.

To this end, Air France Industries has decided to establish a Logistics Center in Singapore to support existing contracts and future business ventures more efficiently within the Asia Pacific region.

In a highly competitive environment with a strained supply chain, managing turnaround times (TAT), repair costs, and logistics expenses are critical challenges for renewing existing contracts and securing new ones.

In addition to supplying materials to customers, Air France Industries and more precisely the Customer Service Department aims to enhance local repair activities to reduce overall turnaround time and costs by sending unserviceable parts for local repair.

A primary responsibility of the Repair Order Administrator will be to manage these local repairs and assess the performance of OEMs and Repair MROs.

KNOWLEDGE, EXPERIENCE and COMPETENCIES

Knowledge and Experience:

• Diploma in an aerospace/purchasing/logistics discipline is preferable but not mandatory;
• No previous relevant experience required;
• Knowledge of aircraft materials airworthiness paperwork and/or logistics is preferred;
• Ability to propose and develop metrics for vendor performance measurement/evaluation would be an advantage;
• Proficient with Microsoft Office and Outlook

Behavioural Competencies:

• Strong written and communication skills
• Strong coordination capabilities and interpersonal skills to establish working relationships with multiple departments and various levels of the organization
• Self-motivated and able to work independently
• Good work attitude and a team player
• Ability to manage supplier relationship and problem solver
• Proactive decisions
• Language: fluent in English / basic French is a plus

Main Responsibilities:

• Supervise and inspect electrical installations, maintenance, and repairs to ensure compliance with safety regulations and standards
• Responsible for the maintenance and repair of electrical equipment
• Guide the team to check the electrical systems and to troubleshoot the electrical faults promptly and efficiently
• Ensure all electrical work is performed in accordance with local codes and regulations
• Provide technical guidance and support to the electrical team
• Collaborate with other departments to ensure seamless operations
• Liaise with project teams and authorities on electrical plan submissions
• Act as the QP for electrical plan submissions
• Any other tasks or duties as assigned by the Supervisor/Management

Requirements:

• Valid Grade 7 Licensed Electrician Worker Licence
• Understanding of electrical systems, safety standards, and regulations
• Hands-on experience in troubleshooting electrical equipment
• Proficient in English (spoken and written)
• Strong problem-solving skills and attention to details
• Good communication and interpersonal skills
• Able to multi-task and work in fast-paced environment

Work Location:

• Changi East

The incumbent will manage installation, maintenance, service, trouble-shoot and repair operations-related facilities and equipment, including automated sorters, conveyor systems, ULD handling equipment, lifting equipment, AGV system and manual equipment etc

• Support and participate in the installation and testing of all operations-related facilities and equipment during pre-operational phase.
• Carry out maintenance/servicing programs for operations-related facilities and equipment.
• Keep accurate maintenance records.
• Perform day-to-day checks of Hub’s automated and mechanical equipment to ensure their safety and serviceability.
• Work with external maintenance providers to ensure compliance with service level agreements.
• Provide instant response in the event of equipment failure.
• Identify, trouble-shoot and rectify equipment failures “on- the-spot” and within agreed timeframes.
• Control inventory level of the maintenance spare parts so as to optimize Hub’s operations with minimal operating costs.
• Knowledge of automated and mechanical material handling or process systems and related checking, maintenance / servicing concepts and methods.
• Knowledge of MS Office, Visio & Autocad; ability to produce and understand mechanical / electrical engineering drawings and maintenance instructions.
• Ability to diagnose and repair electrical and mechanical problems in automated and mechanical material handling or process systems, including adjustment /repair /replacement of components such as motors, gearboxes, bearings, rollers, pulleys, belt tracking, belt tensioning, pneumatic components, hydraulic components, etc.
• Ability to weld, solder and operate machinery typically used for repairing mechanical equipment / components.

Requirements:

• Minimum of 2 years’ hands on experience in installation, maintenance and repair of automated and mechanical material handling or process systems.
• Relevant vocational qualifications or Diploma in a relevant engineering discipline.
• Relevant engineer licenses in electrical / mechanical / maintenance engineering would be advantageous.
• Good communication skills
• This role is required to perform rotating shift role.

Location: DHL Express (South Asia Hub), 121 Airport Cargo Road, Singapore 819480

Facilities Management

• Manage and maintain all facilities in our stores across 4 terminals
• Ensure compliance with workplace safety and health (WSH)
• Monitor contractor’s staff and third party’s contractor (from brand partner) to execute maintenance activities according to scheduled timeline
• Ensure that the completed work by the maintenance technicians, contractors are of a satisfactory expected standard and follow up on any deficiencies such as verification of M&E installation
• Carry out regular routine check and ensure all preventive and corrective maintenance are carried out according to the standard requirements

Compliance

• Support and ensure that actual construction complies with pre-defined technical specifications

Others

• Maintain a good relationship with appointed contractor, brand contractor, brand partners, CAG facility group team
• Any other ad hoc duties/projects as per assigned

Requirement:

• Some basic knowledge of handyman work would be an advantage
• Minimum 1 year of work experience related to facilities management preferably in a retail environment
• Knowledge on safe work procedures would be anadded advantage
• Self-starter,Outgoing, dependable, pro-active and team player with can-do attitude
• Able to work shift work
• Good organizing, problem solving, project and time management skills
• Good communication and interpersonal skills
• Proficient in MS Office

Job Description:

1. Be part of the SIAEC Line Maintenance team in providing motorised equipment across the company

2. Lead a team of maintenance staff and a team of Store personnel to achieve high availability and reliability of motorised equipment in a cost-effective manner

3. Oversee day-to-day operations in the maintenance of Airtugs and Motorised Ground Equipment, including the review of key performance indicators with the maintenance team and the recovery of equipment

4. Build a coherent equipment mix to meet operational demands and drive the purchase of suitable motorised equipment across the company

5. Ensure compliance to quality and safety in operations

6. Develop and maintain an inventory plan to ensure accountability and availability of spares, tools and consumables

7. Drive the adoption of Electric Vehicles and Autonomous Vehicles to support the company’s effort towards Sustainability

8. Drive LEAN methodologies in maintenance to improve productivity

Requirements:

1. Degree in Engineering (Aerospace / Mechanical / Electronics Engineering)

2. Demonstrated experience in aviation, production planning and project management would be an advantage

3. Experience in Equipment Tools Maintenance is an added advantage

4. Excellent analytical, interpersonal, operational and communication skills

5. Self motivated with the ability to work both independently and in a team environment

SIAEC is proud to have received the 2024 'Gold Standard in Excellence in Talent Management & Acquisition Award' from the Singapore Human Resources Institute.

At SIA Engineering, we are committed to ensuring your personal information is protected and never misused. Personal data collected will be used or disclosed only for the purposes of your job application and potential employment with SIA Engineering, such as for assessing and evaluating your suitability for employment in any current or prospective position within the organization and verifying your identity and accuracy of the personal details and other information provided.

By submitting your application for this position, you consent to:

a) the collection, use and disclosure of your personal data by SIA Engineering for the purposes of your application and potential employment with SIA Engineering, including disclosing such personal data to any of SIA Engineering’s subsidiaries, affiliates or related corporations (if necessary for the processing of your job application); and

b) SIA Engineering’s retention of your personal data for 1 year for consideration of future job opportunities (where applicable)

Candidates are not required to pay SIA Engineering, any Agents, or Sub-Agents representing the organisation a recruitment fee or other fees relating to their application / employment.

SIA Engineering is recruiting a number of positions for our Singapore Operations located in Changi ( East side of the island ).

Available roles include the following :

1. Aircraft Technicians ( B1 )
2. Avionics Technicians ( B2 )

Requirements :

• Applicants who applied for the above role must have experienced in similar role(s) in other companies.
• Must have relevant Engineering qualifications
• Must have necessary supporting documents/certifications to prove qualifications
• Willing to work in Singapore
• Ability to speak and write in English language is compulsory
• Immediately available candidates are welcomed

Shortlisted candidates would be contacted for an online interview.

At SIA Engineering, we are committed to ensuring your personal information is protected and never misused. Personal data collected will be used or disclosed only for the purposes of your job application and potential employment with SIA Engineering, such as for assessing and evaluating your suitability for employment in any current or prospective position within the organization and verifying your identity and accuracy of the personal details and other information provided.

By submitting your application for this position, you consent to:

A) The collection, use and disclosure of your personal data by SIA Engineering for the purposes of your application and potential employment with SIA Engineering, including disclosing such personal data to any of SIA Engineering’s subsidiaries, affiliates or related corporations (if necessary for the processing of your job application); and

B) SIA Engineering’s retention of your personal data for 1 year for consideration of future job opportunities (where applicable)

• Inspecting and diagnosing mechanical issues in construction machinery
• Repairing or replacing faulty mechanical components
• Performing routine maintenance checks on construction machinery
• Using specialized tools and equipment to perform repairs and maintenance
• Understanding and interpreting technical manuals and blueprints
• Testing machinery to ensure proper functionality after repairs
• Maintaining an inventory of spare parts for various machinery
• Adhering to safety regulations during repair and maintenance procedures
• Keeping up-to-date with developments in construction machinery technology
• Providing technical advice to construction teams regarding machinery use and maintenance