Total 439 Maintenance / Repair job vacancies in D07 Golden Mile, Middle Road

With thousands of hotels in over 100 countries and territories, Hilton offers countless opportunities to delight. From an open door to a welcoming smile and an exceptional experience, we offer the millions of travellers who stay with us every year a welcome they will never forget. In addition to our flagship brand, Hilton Hotels & Resorts, the family of brands includes Waldorf Astoria, LXR, Conrad, Canopy, Curio Collection, DoubleTree, Hilton Garden Inn, Hampton and many others.

If you appreciate the impact global travel can have on the world, you may be just the person we are looking for to work as a Hilton Team Member. Because it’s with Hilton where we never forget the reason we're here: to delight our guests, Team Members, and owners alike.

The Technician assists the Director of Engineering, Asst. Director of Engineering, Engineering Manager, Chief/Senior Maintenance Officer & Maintenance Officer with the day-to-day operations of Engineering, in line with Conrad standards, brand pillars and prescribed Hilton policies and procedures.

What will I be doing?

As the Engineering Technician, you will be responsible for performing the following tasks to the highest standards:

• Ensure all mechanical and electrical including all piping and fittings throughout the hotel are working satisfactory. Fabricate, repair and maintain mechanical and electrical system, structure and equipment inclusive sanitary, plumbing, waste and choke manhole etc.
• Repair and maintain all mechanical equipment, kitchen equipment, laundry equipment, heat recovery, fresh air supply and exhaust air fans, rubbish bin, trolleys, wheels, all mechanical fittings,etc.
• Install or repair meters, starters, switchgears, fitting, wiring, vacuum machines, cables and all electrical, gas and fuel operated machine throughout the hotel.
• Inspect and replaced all fused lamps inside and outside the hotel including grounds, gardens and swimming pool light.
• Report and maintain television sets, antenna, signal booster and amplifiers.
• Observe and report any equipment, switchgears or wiring which are not functioning properly and rectify them.
• Check and conduct weekly test run generator set and also battery water level, engine oil, indicator water etc.
• To maintain daily log sheets for reading of temperature and pressures of electrical, air-conditioning system, water supply and heat recovery system.
• Check and repair defective flushing system, toilet bowls, urinals, basins and ventilation pipes.
• Check and repair all valves for hot and cold water and chilled water system.
• Check all water pumps systems, heat recovery, flush tanks, water tank heater and swimming pool, inclusive of all valves for hot and cold water systems and chilled water systems.
• Do cement and tiling work for all walls, car parks, beams, pillars and post, floor tiles, vinyl tiles, long bath and basin grouting, pipe and service riser and staircases.
• Construct edges, kerbs and pelmets.
• Weld coppers, galvanized and steam pipes.
• Install and repair washbasins, long bath, toilet bowls and urinals.
• Check, repair and replace washers, gaskets for taps and valves.
• Carry out all work in connection to plumbing and masonry.
• Perform duties as per safety and fire operation drill when and there the need arise.
• Respond promptly and positively to all guest requests, even if it does not directly concerned the department or job.
• Carry out shift/split shift or when called upon to perform odd duties whenever a person of the same category/trade fall sick/on vacation/in-camp training or absent from duties or as called upon to do so from time to time as required or directed by supervisors.
• Coordinate and report to Maintenance Officers, on job assignment and inform them of movement to enable easy and quick locate in case of emergency.
• Assist in keeping workshop areas, plant room and other equipment rooms clean at all times.
• Any other job assignments as and when required by his superiors.
• Participate in the annual fire evacuation drill exercise / building inspection conducted by FSSB.
• Carry out any other reasonable duties and responsibilities as assigned.
• The Management reserves the right to make changes to this job description at its sole discretion and without advance notice.

What are we looking for?

An Engineering Technician serving Hilton Brands is always working on behalf of our Guests and working with other Team Members. To successfully fill this role, you should maintain the attitude, behaviours, skills, and values that follow:

• ITE or Diploma graduates or any other relevant license or experience.
• More than 3 years’ experience in related industry.
• Be able to consistently delight and satisfy our guest.
• Ability to read, write and speak in the English language.
• Work in a safe, prudent and organized manner.

What will it be like to work for Hilton?

Hilton is the leading global hospitality company, spanning the lodging sector from luxurious full-service hotels and resorts to extended-stay suites and mid-priced hotels. For nearly a century, Hilton has offered business and leisure travellers the finest in accommodations, service, amenities and value. Hilton is dedicated to continuing its tradition of providing exceptional guest experiences across its global brands. Our vision to fill the earth with the light and warmth of hospitality unites us as a team to create remarkable hospitality experiences around the world every day. And, our amazing Team Members are at the heart of it all!

We are seeking skilled technicians to join our team for a new shift period starting mid-November from 12:30 AM to 10:30 AM. Candidates must have relevant experience in below postions and be able to work during these hours.

Available Positions:

1. Electrical TechnicianResponsible for installing, maintaining, and repairing electrical systems and equipment.
   
2. Instrument TechnicianSpecializes in monitoring and maintaining instruments and control systems for optimal performance.
   
3. Mechanical TechnicianFocuses on the installation, repair, and maintenance of mechanical systems and machinery.
   
4. HVAC TechnicianHandles the installation, maintenance, and repair of heating, ventilation, and air conditioning systems.
   

Working Conditions:

• Work Location: Mega Yard
• Working Days: 6 days a week (Monday to Saturday)
• Tentative Start Date: Mid-November 2024
• Tentative Duration: 2-3 months
• Daily Rate: + Night Shift Allowance (includes Annual Leave/Medical Leave)
• Insurance/CPF: Provided
• Annual Leave/Medical Leave: 7 days annual leave and 14 days medical leave

Transportation:

Transportation will be catered by Company to facilitate these working hours. Please indicate if you will be utilizing the provided transport.

How to Apply:

Interested candidates should submit their resumes

Job Responsibilities include, but not limited to

• Installing and fixing cabinets, shelving, fitted furniture, drywall and insulation
• Adding fixtures and fittings such as door handles, locks, hinges and closures
• Reading blueprints and designs to work to specifications prepared by other construction professionals, architects and building code recommendations
• Carry out daily painting work according to procedures and specifications
• Plastering work
• Replacement of fused bulbs, lighting, fluorescent tubes in the club
• Ensuring all air-con chillers are functioning
• Check that the hot water system to the guestrooms is operating normally
• Attend to request from departments for repair, servicing, fixture works, faulty equipment, etc
• Implements preventive maintenance and repair schedule for all machinery, equipment and other facilities
• Carry out in-house maintenance or improvement works as instructed
• Maintain daily housekeeping at workplace
• Maintain working tools and equipment in good condition
• Follow safe work practices in all aspect of work
• Any other duties assigned by the Facilities & Project Manager

Join Our Team and Enjoy Fantastic Benefits!

• To assist the Maintenance Manager to implement the execution of preventive maintenance and repair schedules of all machinery, equipment and facilities and see to the proper execution by employee staff or external agencies or contractors.
• To assist the Maintenance Manager to prepare the duty roster of maintenance staff.
• To conduct daily briefing of staff and assign duties to staff to carry out the necessary building operation and engineering works.
• To assist the Maintenance Manager in the execution of administrative duties such as inventory management, record keeping of engineering work / repair, etc.
• To assist the Maintenance Manager to ensure good housekeeping standard of the engineering workshop and that all safety procedures and rules are adhered to.
• To assist the Maintenance Manager to obtain quotations for all the necessary works by external agencies / contractors and for all necessary purchases from suppliers.
• To contribute towards cost management of the department and ensure that there are no wastage, negligence or dishonesty.
• To ensure that the staff in the department provides a high standard of engineering services which meets the expectations of the building owner / tenants / guests.
• In conjunction with the Maintenance Manager, to ensure that that the maintenance staffs are adequately deployed and that they are properly trained to discharge their roles.
• Mentor, coach & orientate new as well as existing staff in their roles & responsibilities towards the department goal.
• In conjunction with the Maintenance Manager, to assist the maintenance staff retention and to take appropriate measure in furtherance of staff stability.
• To ensure that effective fire safety, work place safety practices and enforcement of local Health & Safety regulations are met.
• Ensure to assist department to comply all authorities' requirement
• To ensure that Hotel management is satisfied with the quality of services rendered by the Engineering department.
• To ensure that the Hotels guests receive an adequate level of engineering services that satisfies their concerns and needs.

Job Requirement

• Candidate must possess a Polytechnic Diploma in Electrical, Mechanical or Building Services or equivalent. Preferably with Engineering Degree.
• Preferably with minimum 3 years or more of experience in Engineering management in similar capacity
• Able to deal with suppliers / contractors / government bodies
• Able to manage various projects at any point of time.
• Exposure to purchasing, cost control beneficial
• Able to use Microsoft Word, Excel of computer for preparing reports
• Sound Knowledge of Hotel Engineering and Management
• Sound knowledge in Mechanical / Electrical / Building Engineering
• Possess skills in maintaining, troubleshooting and repairing of building equipment
• Good communication skills (verbal and written), able to resolve any conflicts.
• Good coaching skill, ability to lead the junior maintenance staff.
• Willingness to learn and work as a team member
• Possess high level of integrity and respect for others
• Able to withstand huge pressure and stress towards work
• Outgoing personality
• Responsible to his work, hardworking, good initiative with cost saving in mind
• Self-confident, self esteem
• Good problem solving skills necessary
• Able to put in long hours when required and 24 hours standby for any technical problem occurring

Job Highlights

• Career Development Opportunities
• Duty Meals, Birthday Leave and Flexible benefits
• Complimentary Room Nights
• Discounted Room and Dining Rates

As a Technician, we rely on you to

• Manage, coach and supervise the engineering technicians
• Maintain electrical and mechanical plant & equipment of the hotel
• Manage the engineering programmes
• Organize the record for the future planning

We are looking for someone who:

• Has a passion for Engineering
• Understands engineering equipment in a hotel
• A friendly, helpful and trustworthy leader
• Enjoys taking on a new challenge
• Not afraid to take up new challenges
• Always prepared
• A motivator and a self-starter

If you are the right person, what are you waiting for? Click the apply button now!

Job Description

• Lead and manage new building construction projects, ensuring they are completed on time, within budget, and to specifications
• Develop and implement maintenance programs for existing facilities, ensuring all systems are functioning efficiently and safely
• Provide technical advice to user departments, manage service partners and contractors
• Coordinate fire safety and Green Mark initiatives, investigate safety incidents, and ensure adherence to relevant regulations
• Perform design calculations, prepare engineering plans, and develop maintenance programs to improve facility performance
• Maintain accurate records of maintenance activities and project progress, and prepare reports for management review

Job Requirements

• Degree holder in Electrical Engineering
• Preferably 2-3 years of relevant experience will be advantageous

Interested applicants, kindly furnish us with your detailed resume in MS Words format and click "Apply Now" button.

**We regret to inform only shortlisted candidates will be notified. Applicants who do not possess necessary experience or qualification will still be considered on individual merits and may be contacted for other opportunities.**

**JobStudio will not solicit any money, request to use your bank account for business or request you to transfer any monies to any parties. Please be aware of scams impersonating JobStudio and our employees. You may call our office directly for verification. We will not be liable for any loss arising from scams.**

JOBSTUDIO PTE LTD

EA License No: 10C4754

EA Personnel: Stephanie Toh

EA Personnel Reg No: R1217674

You will be a vital part of the Nursing department in the Operating Theatre and Endoscopy, contributing to the provision of top-notch cancer care for our patients. As a member of the team, you will be responsible for preparing safe and hassle-free operating/procedure rooms. Your role involves assisting the surgical/endoscopist team in providing patient care, surgical positioning, handling, and decontamination of endoscopic equipment. Additionally, you will be involved in the interim and terminal cleaning of the operating/endoscopy rooms, along with any other duties assigned.

Key Responsibilities:

• Setup the operating room/endo procedure room layout for surgical and procedures.
• Assist operating theatre/endoscopy nurses to ensure all medical equipment is in working condition, functional, and operational, ready to use.
• Assist the surgeon/procedurist in positioning the patient, applying diathermy pads, and adjusting operating theatre lights.
• Exercise care and apply safe techniques in lifting and positioning the patient to protect from potential injury.
• Perform daily cleaning and wipe down of basic operating theatre/endoscopy equipment.
• Maintain good housekeeping of Operating Theatre/Endoscopy Rooms, including disposing of linen/biohazard and general waste, etc.
• Clean and handle intervals interim and end process terminal decontamination of the operating theatre/endoscopy, including endoscopic equipment handling and decontamination.

Job Requirements:

• GCE N, O level, WSQ Higher Certificate in Healthcare Support (Operating Theatre/Sterilization), and NITEC in Health Care.

Interested applicants, kindly furnish us with your detailed resume in MS Words format and click "Apply Now" button.

** We regret to inform only shortlisted candidates will be notified. Applicants who do not possess necessary experience or qualification will still be considered on individual merits and may be contacted for other opportunities. **

“Jobstudio will not solicit any money, request to use your bank account for business or request you to transfer any monies to any parties, please be aware of scams impersonating Jobstudio and our employees, you may call our office directly at 64221390 for verification. we will not be liable for loss arising from scams.”

JOBSTUDIO PTE LTD

EA License No 10C4754

EA Personnel: Hoh Mei Ling

EA Personnel Reg No: R21103150

About Us:

Join our dynamic team in the field of pharmaceutical science, where you can make a difference in patient care across different healthcare settings islandwide. We offer opportunities for individuals with a Diploma in Pharmaceutical Science to contribute to the safe and effective dispensing of medication and play a vital role in patient well-being.

Available Settings:

1. Specialized Outpatient Clinics (SOCs):Work in specialized outpatient clinics, providing personalized medication dispensing services to patients under the guidance of experienced pharmacists.
   
2. Inpatient/Outpatient Facilities:Join our team in inpatient or outpatient facilities, where you'll ensure timely and accurate dispensing of medications to support patient care.
   
3. Step Down Care/Community Centers:Extend your expertise to step-down care facilities or community centers, assisting in medication management and promoting adherence to treatment plans.
   

Job Duties:

• Dispense prescribed medication to patients accurately and efficiently, following established protocols and guidelines.
• Provide patients with clear instructions and advice on medication usage, dosage, and potential side effects to ensure safe and effective treatment.
• Verify patient identities and ensure that medications are dispensed correctly to the right individuals, maintaining strict adherence to patient safety standards.
• Assist pharmacists with any ad-hoc duties as assigned, contributing to the smooth operation of the pharmacy department.
• Participate in stock checks and replenishment activities to maintain adequate inventory levels and ensure seamless medication supply.

Job Requirements:

• Diploma in Pharmaceutical Science or equivalent qualification from a recognized institution.

Join Our Team:

If you're passionate about pharmaceutical science and dedicated to making a positive impact on patient care, we invite you to explore our job opportunities across various healthcare settings. Take the next step in your career with us and contribute to improving health outcomes for individuals and communities.

How to Apply:

Interested applicants, kindly furnish us with your detailed resume in MS Words format and click "Apply Now" button

** We regret to inform only shortlisted candidates will be notified. Applicants who do not possess necessary experience or qualification will still be considered on individual merits and may be contacted for other opportunities.**

“ JOBSTUDIO WILL NOT SOLICT ANY MONEY , REQUEST TO USE YOUR BANK ACCOUNT FOR BUSINESS OR REQUEST YOU TO TRANSFER ANY MONIES TO ANY PARTIES , PLEASE BE AWARE OF SCAMS IMPERSONATING JOBSTUDIO AND OUR EMPLOYEES , YOU MAY CALL OUR OFFICE DIRECTLY AT 64221390 FOR VERIFICATION. WE WILL NOT BE LIABLE FOR LOSS ARISING FROM SCAMS.”

JOBSTUDIO PTE LTD

EA License No: 10C4754

EA Personnel: Hoh Mei Ling

EA Personnel Reg No: R21103150

Our client is a 3rd party full-service supplier of logistics and engineering solutions. Currently, our client is seeking for Technician (Rolling Equipment) to be part of the team.

JOB DIMENSION (SCOPE)

• Carry out preventive maintenance and corrective repair works on packaging and conveying equipment
• Troubleshoot and rectify electrical, mechanical, pneumatic and hydraulic system faults on equipment
• Identify mechanical, electrical, and technical issues through inspections and tests
• Analyze problems, diagnose malfunctions, and find solutions
• Use various tools and equipment for diagnosis and repair
• Maintain accurate records of repairs and parts used
• Communicate findings and repair option
• Test vehicles post-repair to ensure proper functionality
• Order and replace parts, collaborating with suppliers
• Attend to breakdown repair and recovery of operational equipment
• Reduce equipment downtime and enhance equipment performance through quality maintenance works
• Proper recording of works carried out on equipment. Equipment includes vehicles, chassis, forklift, industrial facilities, etc (list is non exhaustive)
• Any others adhoc job assigned by supervisor
• Maintain high standard of housekeeping at workplace
• Ensure strict adherence to all workplace Health & Safety policies, legal and company regulations, with proper documentation and storage.
• Practice safe work procedures and safety rules implemented at the workplace.
• Not to engage in any unsafe or negligent act that may endanger self or others.

REQUIREMENT

• Possess Diploma, NITEC, NTC-2 in Electrical Engineering
• General knowledge on AC drives and electrical motors, pneumatic cylinders and roller/chain conveyors
• Basic knowledge of PLC and electrical system
• Min. 3 years' relevant experience in automation systems
• Great teammate with initiative and a positive attitude towards learning
• Self-motivated individual with strong sense of responsibility

We are looking for a proactive and detail-oriented Solar Technician / Solar Engineer to support our Project Manager in the planning, coordination, and execution of solar projects. The ideal candidate will assist in optimizing resources, conducting site studies, managing site teams, and ensuring projects adhere to safety standards, timelines, and budgets. This role is perfect for fresh graduates looking to gain experience in the renewable energy sector, with on-the-job training provided.

Key Responsibilities:

• Assist the Project Manager in coordinating, planning, and forecasting resources to optimize utilization and meet project milestones and budgetary goals.
• Conduct site studies to assess conditions and provide recommendations for photovoltaic (PV) systems.
• Oversee and manage the solar project site team, ensuring that all work complies with safety regulations and standards.
• Monitor work progress at the project site to ensure that it aligns with the technical specifications, project schedule, and budget.
• Ensure that all site activities follow safety standards and regulations.

Requirements:

• Diploma in Mechanical or Electrical Engineering, or a related discipline is preferred.
• Fresh graduates are welcome to apply. On-the-job training will be provided.
• AutoCAD, SolidWorks, and other modeling software (e.g., SketchUp, PVsyst, Helioscope).

If you are keen to join our dynamic team, please submit your resume in either Word or PDF format to cvs@jdawms.com. In your application, kindly include the following details:

• Current Salary
• Expected Salary
• Availability
• Reason for Leaving

We appreciate your interest in this opportunity. Please note that only shortlisted candidates will be contacted for further consideration.

By submitting your application or resume, you acknowledge and consent to the collection, use, retention, and disclosure of your personal information by us to potential employers through our services.

EA (23S1595/R23116355)

• Higher NITEC or Diploma in Electrical or Mechatronics, or any technical qualification in Precision Engineering.
• Familiarity with Mitsubishi or Siemens PLC is a plus.
• Preferred candidates should have at least 2-3 years of experience in operating Precision Engineering machinery or in machinery servicin

Thank you for your application and we regret that only shortlisted applicants will be notified

By submitting any application or resume to us, you will be deemed to have agreed & consented to us collecting, using, retaining & disclosing your personal information to prospective employers with the services provided by us.

EA (18C9514/R23118479)

• Monitor and manage stock-taking of equipment and Science resource materials.
• Prepare lab materials/resources to ensure experiment is carried out effectively.
• Maintain a catalogue of lab resources to assist teachers in planning of their activities.
• Assist in product specifications and sourcing of teaching apparatus, posters and furniture to enhance lab’s appearance and functionality.
• Assist teachers when experiments are carried out.
• Keep a log on loaning and returning of apparatus.
• Assist in the preparation of apparatus and equipment for lessons.
• Maintain general cleanliness and functionality of equipment.
• Sit in during Science Olympiad lessons.
• Any other jobs assigned by the department which include collation of teaching and learning materials and preparation of resources necessary for teaching and learning in Science, helping during Science Practical Assessments.

Qualification

• At least 3 passes at GCE ‘N’ level
• Relevant experience as a Lab Technician in a school setting is highly advantageous
• Possesses good communication skills to liaise with teachers, students and other stakeholders.
• Meticulous and detailed in carrying out tasks

Roles & Responsibilities

• Responsible for carrying out daily pest control activities according to operational schedule
• Monitors and responds to customers’ feedback
• Provides oral and written feedback on work activities
• Uses equipment, chemicals, and pesticide/insecticide products
• Performs any other related duties as instructed by the immediate superior.

Requirements

• Must possess an NEA Vector Control License
• Physical fit to carry out the works.
• Candidates with no experience are welcome to apply

We are seeking a dedicated and skilled Maintenance Mechanical Engineer to ensure the smooth operation and maintenance of equipment and facilities at our chemical plant. The ideal candidate will be responsible for managing spare parts, optimizing stock control using CMMS TMQ-W, and improving equipment reliability to prevent downtime. This role requires strong mechanical engineering expertise and hands-on experience in plant and facility maintenance.

Key Responsibilities:

• Prepare and review the spare parts list and equipment data for inventory control.
• Ensure the availability of critical spare parts to avoid equipment downtime.
• Optimize spare parts management and stock control by using the CMMS system TMQ-W.
• Service and maintain used equipment and components to ensure they are always ready for use.
• Analyze equipment failures and collaborate with production teams and contractors to improve reliability.
• Continuously improve the maintenance process to increase the longevity and efficiency of utilities and facilities.
• Work proactively to ensure no operational downtime occurs due to the unavailability of spare parts or equipment failure.
• Conduct regular maintenance checks and repairs as required to keep machinery and equipment functioning smoothly.
• Work closely with the production team and contractors to address recurring issues and implement solutions to enhance equipment reliability.
• Review and refine maintenance practices to ensure optimal plant performance and minimize disruptions.

Qualifications:

• Degree in Mechanical Engineering or an equivalent qualification.
• 3-5 years of experience in plant and facility maintenance, preferably in a chemical processing plant.
• Basic understanding of maintenance technology in a manufacturing or process plant environment.
• Experience with CMMS software, specifically TMQ-W, for inventory and maintenance management.
• Strong knowledge of spare parts management and equipment maintenance techniques.
• Familiarity with utilities and facilities maintenance in a chemical plant.

If you are keen to join our dynamic team, please submit your resume in either Word or PDF format to cvs@jdawms.com. In your application, kindly include the following details:

• Current Salary
• Expected Salary
• Availability
• Reason for Leaving

We appreciate your interest in this opportunity. Please note that only shortlisted candidates will be contacted for further consideration.

By submitting your application or resume, you acknowledge and consent to the collection, use, retention, and disclosure of your personal information by us to potential employers through our services.

EA (23S1595/R23116355)