Total 22 Senior Executive level Maintenance / Repair job vacancies in D17 Loyang, Changi

RESPONSIBILITIES

• General electrical fitting work including installation of electrical equipment, electrical cabling works, cable trucking, cable conduit and termination, etc
• Maintenance of M&E equipment
• Troubleshooting of electrical system
• Troubleshooting and repair works for air conditioning system (Single Split, Multi Split & VRV)
• Installation of air conditioning system
• On-site maintenance of Air-con and MV system
• Preparation of service reports
• Attending urgent calls during & after office hours
• Any duties as assigned by supervisor

JOB REQUIREMENTS

• Minimum 2 years hand-on experience in maintenance, troubleshooting and installation in electrical systems
• Must be able to install GI trunking and conduits works.
• Minimum 2 years hand-on experience in maintenance, troubleshooting and repair works in ACMV system
• Must have knowledge of Air-con DX system and Chilled water system.
• MUST have Coretrade certificate.
• Basic maintenance knowledge of M&E systems.
• Valid class 3 driving licence is preferred.
• Working location: Island-wide Singapore
• Working hours: Monday to Saturday (8:30 am to 5:30 pm)

Job Description:

1. Be part of the SIAEC Line Maintenance team in providing motorised equipment across the company

2. Lead a team of maintenance staff and a team of Store personnel to achieve high availability and reliability of motorised equipment in a cost-effective manner

3. Oversee day-to-day operations in the maintenance of Airtugs and Motorised Ground Equipment, including the review of key performance indicators with the maintenance team and the recovery of equipment

4. Build a coherent equipment mix to meet operational demands and drive the purchase of suitable motorised equipment across the company

5. Ensure compliance to quality and safety in operations

6. Develop and maintain an inventory plan to ensure accountability and availability of spares, tools and consumables

7. Drive the adoption of Electric Vehicles and Autonomous Vehicles to support the company’s effort towards Sustainability

8. Drive LEAN methodologies in maintenance to improve productivity

Requirements:

1. Degree in Engineering (Aerospace / Mechanical / Electronics Engineering)

2. Demonstrated experience in aviation, production planning and project management would be an advantage

3. Experience in Equipment Tools Maintenance is an added advantage

4. Excellent analytical, interpersonal, operational and communication skills

5. Self motivated with the ability to work both independently and in a team environment

SIAEC is proud to have received the 2024 'Gold Standard in Excellence in Talent Management & Acquisition Award' from the Singapore Human Resources Institute.

At SIA Engineering, we are committed to ensuring your personal information is protected and never misused. Personal data collected will be used or disclosed only for the purposes of your job application and potential employment with SIA Engineering, such as for assessing and evaluating your suitability for employment in any current or prospective position within the organization and verifying your identity and accuracy of the personal details and other information provided.

By submitting your application for this position, you consent to:

a) the collection, use and disclosure of your personal data by SIA Engineering for the purposes of your application and potential employment with SIA Engineering, including disclosing such personal data to any of SIA Engineering’s subsidiaries, affiliates or related corporations (if necessary for the processing of your job application); and

b) SIA Engineering’s retention of your personal data for 1 year for consideration of future job opportunities (where applicable)

Candidates are not required to pay SIA Engineering, any Agents, or Sub-Agents representing the organisation a recruitment fee or other fees relating to their application / employment.

Key Responsibilities:
• Perform routine microbiology/chemistry testing services by using established procedures/protocols. Support testing by following procedure in completing validation/revalidation activities (equipment and/or processes) for critical systems and sterilization equipment.
• Perform preliminary investigation and write-up; deliberate with Microbiologist/Chemist in root cause investigations for product/sample failures and Out-of-Specifications (OOS).
• Perform validation/re-validations for new/existing laboratory equipment according to established protocol.
• Update operating procedures and/or validation protocols/reports
• Data entry and trending of routine microbial/chemistry testing for analysis by Microbiologist/Chemist
• Review, follow and perform job functions in compliance with established work instructions and adherence with SOPs, including recording traceable information on device history records.
• Other incidental duties

Education and Experience:
Other: in NITEC or equivalent in related science field, 3 years experience previous experience working in a laboratory environment Required or
Other: in Higher NITEC or equivalent in related science field, 2 years experience previous experience working in a laboratory environment Required or
Associate's Degree or equivalent in Diploma in related science field, 1 Year experience previous experience working in a laboratory environment Preferred or
Bachelor's Degree in in related science field Preferred

Additional Skills:
• Ability to read, comprehend, and write English; good communication and interpersonal skills, required
• Knowledge of and adherence to Edwards Environmental Health and Safety and Quality guidelines as they relate to department clean room medical device manufacturing
• Must be able to work in a team environment and with minimum supervision
• Good Computer skills, required
• Adhere to all company rules and requirements (e.g., pandemic protocols, Environmental Health & Safety rules) and take adequate control measures in preventing injuries to themselves and others as well as to the protection of environment and prevention of pollution under their span of influence/control

Job Roles

• Perform regular preventive maintenance work on company vehicle.
• Conduct regular inspections on company vehicles to ensure reliability and to pass regulatory inspections and audits.
• Carry out corrective maintenance and repairs on vehicles to minimize downtime.
• Ensure that all required documentations are filled out and stored.
• Prepared to work the hours necessary to complete all tasks required to achieve Peak Vehicle Requirement (PVR).
• Ensure that all maintenance work performed adhere strictly to standards established by the company and any legal requirements.
• Ensure strict adherence to all Health & Safety procedures, legal and company regulations.
• Carry out any other duties as required by the Engineering Department and Management.
• Supervise and ensure workplace safety and health risks are identified, assessed and controlled, and provide employees with information on compliance to workplace safety and health policies.

Job Requirements

• Candidates must possess a NITEC or Diploma in a relevant field.
• At least 1 year of working experience in an automotive or engineering environment.
• Candidates must possess a valid Class 3 Driving License.
• Able to perform shift work.

Go-Ahead Singapore is committed to provide a healthy, safe and secure work environment to all employees. Please visit our website (www.go-aheadsingapore.com) for more details.

Job Description

• Manage site Facility Management and Health Safety & Environment (FMHSE) to meet Safety Quality Cost Delivery People (SQCDP) Key Performance Indicators.
• Work with Cross Functional Teams (CFT) within the Operating System to continuously improve performance and strengthen culture.
• Provide FM/HSE technical inputs in the procurement of products, services and administration of contracts.
• Conduct FMHSE incident investigation and/or validate completed investigation root cause and submission of the required reports.
• Implement the FMHSE audit and inspection plan and conduct risk-based compliance checks to report on the adequacy and effectiveness of the controls.
• Ensure timely closure of FMHSE corrective and preventive actions from various drivers and evaluate/monitor for effective implementation.
• Liaise and coordinate with sub-contractors/vendors and ensure works/services delivery are completed on time, as per contract requirements and complying with controls identified in risk assessments.
• Support the HSEF strategy and undertake the role/tasks appointed.
• Perform the role of FSM and/or WSHC or WSHO, as required and lead/support internal and external certification audits (e.g., ISO45001, ISO14001 and ISO50001).
• Assist in facilities preventive and breakdown maintenance work for Hard and Soft Services
• Note: This role may require travelling between SAESL sites (Calshot, Loyang and CK warehouse).

Qualification/Experience

• Diploma/ Degree in HSE/Facilities/ Building management or Engineering or equivalent. WSH and Fire Safety Manager certification (WSHO preferred). Candidates currently pursuing qualifications may apply.
• At least 3 years of relevant working experience. Good knowledge and understanding of WSH and building industry regulations.
• Knowledge and experience in the development and application of IT in building management or infrastructure software systems. An effective team player with strong communication, interpersonal, analytical and project management skills.

ST Engineering is a global technology, defence and engineering group with a diverse portfolio of businesses across the aerospace, smart city, defence and public security segments. The Group harnesses technology and innovation to solve real-world problems, enabling a more secure and sustainable world. Headquartered in Singapore, it has operations spanning Asia, Europe, the Middle East and the U.S., serving customers in more than 100 countries. ST Engineering reported a revenue of over $10 billion in 2023 and ranks among the largest companies listed on the Singapore Exchange. It is a component stock of MSCI Singapore, FTSE Straits Times Index and Dow Jones Sustainability Asia Pacific Index.

About Commercial Aerospace business

ST Engineering’s Commercial Aerospace business is a world-class Original Equipment Manufacturer (OEM) and Maintenance, Repair and Overhaul (MRO) service provider with proven solutions for practically every stage of an aircraft life cycle. With nearly 50 years of reputable track record in aviation, backed by a highly experienced team of engineers and technicians across facilities in Asia Pacific, the U.S. and Europe, we know what it takes to keep the world flying safely.

Job Details

• Maintenance and servicing of avionics systems per customer's requirements.
• Carry out component changes.
• Assist engineers in trouble-shooting and rectification
• Assist in installing and servicing avionics communications equipment.
• Inspect and test the electrical and computer systems that allow aircraft to function.
• Oversee airplane's radar system, radio communications equipment and the flight controls.
• Removal, assemble and install electrical components, and keep detailed written records of repair work performed on aircraft. (E.g. Main Battery, Emergency Battery, Starter Generator, ACW Generator, GCU, BPCU, etc.)
• Removal and installation of engine and propeller electronic controls.
• Performs components changes, tests, and adjustments on aircraft electrical avionics systems consistent with the quality standards.

Job Requirements

• Minimum O level and above, with at least 1 year of working experience as an avionics technician in the aviation industry
• Good team member with strong interpersonal skills.
• Mechanically and electrically trained on Avionics systems

Job Description:

• To ensure given KPI are met timely and effectively
• Providing administrative, planning, organising, controlling, discipline and training functions of his departments.
• General administration, supervision and control of Supervisor and staff under the department
• Follow up with customer’ vendor and./or authorities for required task to be performed/ supported
• Co-ordinating with other sections and departments to ensure equipment are released from operation for maintenance.
• Ensuring that safety rules and regulations are complied with.
• Ensuring all mechanics are adequately trained and have refresher training.
• Ensuring that work is performed as planned or scheduled and to meet all daily/ preventive maintenance
• Ensuring the upkeep of his department’s equipment, tools and vehicles.
• Raise Asset Disposal Application (ADA) for unserviceable equipment and follow up on the update the inventory list.
• Ensure sufficient tools/ special tooling and spares are required for maintenance and ensure PR is raised and follow up if required
• Coordinate the purchase of new equipment for SIAEC.
• Ensure new Ground Support Equipment are inducted through the correct process.
• Highlight and Coordinate with GSE in-charged for other necessary matters.
• Such other duties as assigned to him by the Ops Manager

Job Requirement:

• Diploma / Degree in Engineering/ Aviation/ Mechanical or related field
• Minimum 2 years experience in Operations/ Aviation
• Proficiency in Excel/ Words/ Point and any other will be an advantage
• State Class 3 driving license for Airside Driving

Job Responsibilities

• Perform equipment inspections to identify potential problems and safety concerns
• Perform diagnostic troubleshooting and failure analysis on all components and systems of the equipment.
• Isolates equipment malfunctions.
• Replace and/or repair faulty components and systems on equipment.
• Perform corrective and preventive maintenance to ensure that equipment continues to run according to manufacturer's specifications
• Maintain parts and supplies needed for job completion
• Maintain company vehicle cleanliness and ensure vehicle is in safe operating condition
• Maintain a culture of safety & participate in all safety meetings
• Responsible for properly and accurately filling out all job cards in service CRM
• Responsible for maintaining a clean and safe work area
• Responsible for maintaining all tools are in safe working conditions
• Picks up parts and performs other tasks as assigned
• Return un-use parts to the service coordinator/CSS
• Return faulty parts to the workshop team leader
• Complete basic and advanced technical training as assigned
• Support junior technician at the field when they are having issues in troubleshooting
• Handle more complex job orders

Job Requirements

• Min ITE graduates in Automotive Engineering
• Min 5 years of relevant experience
• ITE graduates with no experience are welcome to apply
• Possesses class 3 driving license
• Able to read and understand electrical and hydraulic schematics
• Familiar with hand and power tool operation
• Have experience in handling electrical/electronic systems and hydraulics and internal combustion engines
• Able to use desktop and mobile PCs
• Willing to work at Loyang
• Willing to work for 5.5 day work week

RESPONSIBILITIES

• General electrical fitting work including installation of electrical equipment, electrical cabling works, cable trucking, cable conduit and termination, etc
• Maintenance of M&E equipment
• Troubleshooting of electrical system
• Troubleshooting and repair works for air conditioning system (Single Split, Multi Split & VRV)
• Installation of air conditioning system
• On-site maintenance of Air-con and MV system
• Preparation of service reports
• Attending urgent calls during & after office hours
• Any duties as assigned by supervisor

JOB REQUIREMENTS

• Minimum 2 years hand-on experience in maintenance, troubleshooting and installation in electrical systems
• Must be able to install GI trunking and conduits works.
• Minimum 2 years hand-on experience in maintenance, troubleshooting and repair works in ACMV system
• Must have knowledge of Air-con DX system and Chilled water system.
• MUST have Coretrade certificate.
• Basic maintenance knowledge of M&E systems.
• Valid class 3 driving licence is preferred.
• Working location: Island-wide Singapore
• Working hours: Monday to Saturday (8:30 am to 5:30 pm)

As Senior Technician, you’ll be assisting the Shift Engineer or Assistant Chief Engineer in managing the engineering/maintenance of your hotel and ensure the safety and comfort of hotel guests and team members.

A little taste of your day-to-day

Every day is different, but you’ll mostly be:

• Assisting the Assistant Chief Engineer with general hotel and building minor maintenance work
• Ensuring that work is completed to a high standard within your established trade which meets the needs and expectations
• Initiating actions to correct a hazardous situation and notify supervisors of potential dangers
• Conducting routine inspection checks on all operational Mechanical & Electrical (M&E) equipment of the hotel
• Ensuring all work procedures are aligned to Occupational Health and Safety (OH&S) guidelines
• Using energy efficient methods to reduce energy consumption expenses
• Logging security incidents and accidents in accordance with hotel requirements
• Handling duties as an Emergency Respond team member during fire, Bomb-threats and any emergency cases in the hotel

What we need from you

• A minimum Professional Certificate/ NiTEC/ Diploma in Engineering
• At least 2 years of relevant work experience
• Able to work rotating shift hours over weekends and public holidays
• Proactive and have an eye for details
• Self-motivated and hardworking individual
• Team player who works effectively in a team environment

What you can expect from us

We give our people everything they need to succeed. From a competitive salary that rewards all your hard work to a wide range of benefits designed to help you live your best work life – including a full uniform, impressive room discounts and some of the best training in the business.

Our mission is to welcome everyone and create inclusive teams where we celebrate difference and encourage colleagues to bring their whole selves to work. IHG Hotels & Resorts provides equal employment opportunities to applicants and employees without regard to race, color, religion, gender, sexual orientation, gender identity, national origin, protected veteran status, or disability. We promote a culture of trust, support, and acceptance. Always welcoming different backgrounds, experiences, and perspectives.

IHG gives every member of the team the room they need to belong, grow and make a difference in a collaborative environment. We know that to work well, we need to feel well – both inside and outside of work – and through our myWellbeing framework, we are committed to supporting wellbeing in your health, lifestyle, and workplace.

So, join us and you’ll become part of our ever-growing global family.

Senior Dive and ROV technician

Repair and maintain diving and rov systems

Repair and maintenance of project related equipment such as winches , compressors , gensets

Mainly working in workshop

Maybe activated to go out in anchorage or overseas if needed

This position includes generation and maintenance of Certpacks, PMS and Audits

5.5 day work week

Job Roles

• Perform regular preventive maintenance work on company vehicle.
• Conduct regular inspections on company vehicles to ensure reliability and to pass regulatory inspections and audits.
• Carry out corrective maintenance and repairs on vehicles to minimize downtime.
• Ensure that all required documentations are filled out and stored.
• Prepared to work the hours necessary to complete all tasks required to achieve Peak Vehicle Requirement (PVR).
• Ensure that all maintenance work performed adhere strictly to standards established by the company and any legal requirements.
• Ensure strict adherence to all Health & Safety procedures, legal and company regulations.
• Carry out any other duties as required by the Engineering Department and Management.
• Supervise and ensure workplace safety and health risks are identified, assessed and controlled, and provide employees with information on compliance to workplace safety and health policies.

Job Requirements

• Candidates must possess a NITEC or Diploma in a relevant field.
• At least 1 year of working experience in an automotive or engineering environment.
• Candidates must possess a valid Class 3 Driving License.
• Able to perform shift work.

Go-Ahead Singapore is committed to provide a healthy, safe and secure work environment to all employees. Please visit our website (www.go-aheadsingapore.com) for more details.

Applies skill in the maintenance and operation of facility systems to ensure operational effectiveness and optimum performance, in compliance to EHS and other applicable quality and regulatory guidelines.

Key Responsibilities:
• Assigns scheduled and unscheduled preventive maintenance routines to facilities Technicians, supervise and verifies execution.
• Apply in-depth knowledge and technical proficiency in operation and maintenance of facilities systems to ensure successful outcomes, devise complex process changes, and ensure knowledge transfer to other levels of technicians.
• Lead and manage minor facilities projects. Managing of contractor, vendor and/or consultant to develop project plan and budget if required raise CAPEX for approval. Oversee and ensure that contractor and vendor perform all tasks to specification and compliance to GxP and EHS requirement
• Check for failures in equipment and perform or supervise corrective actions to affected areas that have down time, including conducting and writing impact assessment reports of incidents, exception work orders (EWOs), Equipment Non-conformance Reports (ER/CMs), and Out of Tolerance (OOTs).
• Troubleshoot, as well as anticipate issues, and propose solutions to limit downtime and keep production on schedule
• Analyze predictive inspection data of critical facilities systems include clean room system with engineer to determine predictive maintenance action to prevent premature system breakdown
• Collaborate with Quality and Engineering to evaluate existing processes and identify opportunities for improvement and optimal operations.
• Provide training, coaching, guidance, and information to lower level technicians as requested and needed.
• Assist engineer performing validation on facilities systems include clean room system
• Review and enhance effectiveness of Preventive Maintenance, TPM, continuous improvement and calibration with engineer.
• Establish equipment spare parts list of facilities system include clean room system
• Manage facilities asset list. Review engineer and manager on new and disposed asset resolutio
• Other incidental duties (e.g. occasional photo copying or deliveries)

Education and Experience:
• Bachelors Degree or equivalent in Mechanical/Electronic/Electricity Engineering (or relevant) Degree from a recognized institution with 7 years of related experience.
• Working knowledge of electrical, mechanical, lubrication, pneumatic, boiler and/or autoclave required

Additional Skills:
• Demonstrated ability to lead teams, coach others, and transfer knowledge
• Strong English language skills, including reading, comprehending, speaking and writing, and good communication skills
• Proficient computer skills, including MS Office and Maximo
• Extensive knowledge of routine preventive maintenance of Facilities system.
• In-depth knowledge in HVAC system, Electrical system, Clean room system, RO water system, Steam boiler system and Compressed air system
• Full knowledge of GxP, Quality and EHS practices
• Knowledge of Good Manufacturing and Good Documentation Practices supporting a medical device environment
• Must be able to work independently, and provide guidance, training, and assignments to lower-level technicians
• Adhere to all company rules and requirements (e.g., pandemic protocols, Environmental Health & Safety rules) and take adequate control measures in preventing injuries to themselves and others as well as to the protection of environment and prevention of pollution under their span of influence/control
• Project management knowledge and budgeting
• Must be able to work independently including formulating work instructions and providing guidance and training to lower-level employees
• Ability to read and understand blueprints, sketches, layouts, wiring diagrams, drawings and specifications

To Note:

Transport provided

2nd Shift: 1530 - 0000

Job Description:

• Performs aircraft sheet metal layout and template.
• Repair and modifies aircraft structural parts and repairs composite materials.
• Manufacture and repair non-in stock structural parts.
• Performs metal forming operation.
• Be able to interpret basic drawings and blueprint.
• Identify aircraft major and minor defects and prepared type of repair required.
• Fabricates related sheet metal and assemblies.
• Performs and replace plastic aircraft enclosure.

Job Requirements:

• MRO or shipbuilding industry for at least 5 years to perform structure repairs and modifications independently
• Prior working knowledge on Airbus and Boeing aircrafts like B767, B777, A320, A330 etc will be advantageous
• Strong foundation in structure hand skills and special tooling usage
• Ability to interpret engineering drawing
• Knowledge to understand SRM, CMM, AMM and other engineering document

Job Description

• Performs removal, installation, servicing , operational test and troubleshooting of aircraft system in mechanical trade
• Performs and documents all work performed per appropriate manuals and regulations as required

Requirement

• O level and above, with at least 1 year of relevant experience in the aerospace industry
• Ability to read mechanical engineering drawings
• Ability to effectively communicate in both written and verbal form on individual and / or aircraft status