Total 1,254 Others level Maintenance / Repair job vacancies in OT139: CZ - ST LOUIS (BRENTWOOD) 1976 Congressional Drive , Maryland Heights, MO, 63146 USA

Electrical Control Panel Technician

Position Details:

• Type: Permanent, immediate start available
• Salary: Up to £32,448 PA DOE, with overtime available at 1.5 times the hourly rate
• Location: Cambourne - St. Neots area (own transport required)
• Working Hours: 39 hours per week, with a mid-day finish on Fridays
• Free on-site car parking.

Key Responsibilities:

• Constructing and wiring control panels according to technical drawings
• Testing and fault-finding on control panels

Preferred Qualifications/Experience:

• Practical electrical wiring experience in an industrial environment
• Ability to read and interpret technical drawings
• Strong problem-solving skills and attention to detail

Working Hours:

39 per week, Mid-day finish on a Friday

• Monday: 7:30 am - 4:00 pm
• Tuesday: 7:30 am - 4:30 pm
• Wednesday & Thursday: 7:30 am - 5:00 pm
• Friday: 7:30 am - 12:00 noon

Benefits:

• Subsidised drinks and snacks
• Annual bonus based on company performance
• 20 days holiday, increasing to 26 days with service, plus bank holidays
• Life assurance, sick pay scheme, pension scheme
• Provided workwear, staff meals and events
• Free on-site car parking

HRGO Recruitment offers permanent and temporary jobs across the UK. You must have current UK right to work to be considered. We aim to respond to all applications. HRGO is an equal opportunities employer.

• You will perform hydrographic and topographic surveying work requiring a basic knowledge of principles and practices of conventional and Global Positioning System survey techniques. Perform data uploads, downloads, and survey computations.
• Prepare, inspect, and operate surveying-related equipment aboard District survey vessels.
• Computer checkpoints and prepare survey data for entry into computer.
• Observe operation of computer system and depth recorder to correct discrepancies.
• Assist with preparing finished maps and charts of the channel and sounding by processing the data to remove noise using computer hardware and software.
• Operate instruments such as total stations, laser scanners, GPS receivers, on surveys that may require traversing and setting additional control points.
• Prepare field notes and reports. Review data in field to ensure complete coverage in accordance with project specifications and standard operating procedures.
• Operate vessels less than 26’ in length to conduct hydrographic surveys.

• You will review cost estimates, budget, or contracting processes in order to meet acquisition objectives.
• You will develop complete working drawings and specifications for “design bid build” projects and development of Request for Proposal (RFP) for “design build” projects.
• You will be responsible for providing design support prior to construction award and providing the successful management of any and all post award aspects of the construction portion for the projects assigned.
• You will use energy modeling software (i.e. Auto desk software, Microsoft Office, mechanical engineering design, analysis software) to assist with producing proposed design drawings and specifications for mechanical and utility systems.
• You will advise multi-disciplinary teams on facility development products or services to ensure successful project execution.
• You will evaluate engineering design, construction, operation, maintenance, and repair of utilities equipment and systems to resolve any issues in a timely matter.
• You will write documentation to resolve disagreements concerning facilities engineering issues.

The National Security Agency (NSA) has opportunities available for highly motivated High Voltage Technicians with industrial/commercial experience. Our well-rounded team of professionals maintains the infrastructure that powers NSA's mission around the globe. The best candidates will use their technical and leadership skills to ensure best-in-class electrical services. This position will provide development opportunities to maximize your career growth in a rewarding environment.

Our High Voltage Technicians are responsible for high, medium, and low voltage electrical power installations. Responsibilities include emergency and supplemental power generation, primary (HV/MV) and secondary (LV) electrical substations, overhead and underground power distribution, SCADA systems, digital and analog control systems, protective relaying equipment, large scale UPS systems, building services, switchgear, power conditioning equipment, as well as general lighting, grounding, and lightning protection systems.

Our High Voltage Technicians operate and maintain high voltage electrical systems such as main switchgear, relays, generators, uninterruptible power systems (UPS), power panels, lights, outlets, motors and controls operating at up to 115,000 volts. The candidate will adapt work methods in response to new information, changing conditions, emergencies, or unexpected obstacles. The candidate will have the ability to articulate viewpoints and solutions to customers, peers, and supervisors in an effective manner. The candidate will identify and analyze technical issues, reporting, and documentation and contribute to project status briefings.

• Manages and executes Asset Management Plans (AMP) and/or Sub-Asset Management Plans (Sub-AMP) for entire installation.
• Integrates and synchronizes Operations Flight work force for Sustainment Management Systems (SMS) data standards, collection, and analysis.
• Integrates and synchronizes Operations Flight work force for preventive maintenance (PM). Manages PM program in the appropriate approved IT system (e.g. NexGen IT/ACES-WIMS) and maintains records IAW prescriptive requirements.
• Integrates and synchronizes Operations Flight contract project development, review, construction, and integration, and warranty management pertaining to respective portfolio.

Duties include, but may not be limited to the following:

• Pulls stock inventory and material for delivery; replenishes stock inventory; interacts with clinical and administrative customers and maintains records on stock levels;
• Communicates to the Lead or Supervisor any concerns related to supplies, equipment and procedures.
• Provides information to customers regarding medical supplies;
• Monitors expiration dates, rotates stock to limit outdates and removes items from use as required by outdates;
• Monitors and controls critical supplies;
• Performs daily inventory using bar coding equipment on a predetermined schedule that will allow for timely replenishment;
• Resolves differences between records and physical count of stock;
• Distributes items according to established or ad hoc requirements in computerized inventory management systems;
• Delivers supplies in a timely manner and ensures supplies and material delivered are in sterile and operational condition;
• Completes specialty cart preparation;
• Cleans assigned secondary areas in accordance with aseptic principles; and
• Receives supplies and material into the medical center's catchment area.

• Plans and administers service contracts relating to base maintenance, repair, and recurring service requirements.
• Technical representative for contracting officer. Interprets and clarifies plans, specifications, and other proposal documents.
• Provides information and advice to construction agents concerning contractor services, products, and requirements on a regular basis.
• Develops and implements a contract quality assurance inspection schedule for all contract services acquired.
• Summarizes results of evaluations of contract performance and calculates recommended changes in payment as required; prepares funding estimates and all supporting data in connection with justification of budget requirements to support all acquired contract services and modifications to contracts.

Proud member of the Disability Confident employer scheme

JOB RESPONSIBILITIES

• Perform troubleshooting and failure analysis for production fallouts.
• Troubleshoot, repair and maintenance of machine/equipment/tool/jig
• Validates & maintains test equipment in good condition by performing periodic preventive maintenance as per schedule.
• Assist Test Engineer on test equipment and set-up for NPI (New Project Introduction)
• Ensure compliance to the quality standards, company guidelines & procedures are adhered to whilst providing necessary support to production.
• Compile Test Yield Report.
• Constantly looking into better test efficiencies to improve the test yield.
• Perform rework and repair of printed circuit board assemblies (through hole and SMT parts) according to IPC standards.
• Feedback unusual high fallout to Test Engineer.
• Perform any other duties as assigned by the company.

AUTHORITY

• Maintain minimum debug WIP through test yield improvements & resource management.

Sunlight Ambulance Services is your trusted Singapore private ambulance provider, serving patients from the general public and from leading medical institutions like CGH, SGH, KTPH and numerous nursing homes across the island. As we expand our company, we offer promising avenues for career progression. Successful candidates will be assigned to roles that align with their skills through the interview. Contact 624 111 20 if you are interested!

Responsibilities

As an Emergency Medical Technician, you will be responsible for responding to

• Non-emergency cases
• Attending to hospital discharges
• Patient appointments
• and providing dialysis transportation.
• Attend to cross-border, ferry, or airport transfers, as well as cover sports events when required.

Qualifications

• BCLS & SFA+AED Certification
• A Valid and Accredited EMT certification (within 2 years of validity) by SAF/SCDF/Alice Lee
• Good verbal skills to comfort the patients and relay information.
• Able to speak & write in English.
• Comfortable in working shifts, including weekends & Public Holidays
• Enrolled Nurse with Valid Certification can apply.

Job Highlight

We believe in rewarding our team members for their hard work and dedication to providing exceptional patient care therefore, in addition to your salary, you will receive case incentives and other benefits.

• Allowances, Incentives, AWS & KPI Bonus (full-time staff)
• Flexible shifts
• Islandwide locations
• We believe in upgrading our staff: Skills development training will be provided.
• At least 10 days of Annual Leave
• Child Care Leave
• Cell Phone Allowance
• OT Pay

Overtime compensation will be calculated in accordance with MOM regulations, which stipulate a rate of 1.5x the Base Salary.

• Plan and lay out work from blueprints, sketches, drawings, specifications, and work orders.
• Interpret and apply complex building plans to determine material, tools, and equipment needed Completes work from initial layout to final assembly.
• Apply a full range of carpentry methods in accomplishing complex tasks.
• Apply a full range of painting methods in accomplishing complex tasks.
• Prepare various surfaces of interior and exterior components of buildings.
• Mix, thin, blend, match, tint, and tone coating materials.

• Plan and lay out work from blueprints, sketches, drawings, specifications, and work orders.
• Interpret and apply complex building plans to determine material, tools, and equipment needed Completes work from initial layout to final assembly.
• Apply a full range of carpentry methods in accomplishing complex tasks.
• Apply a full range of painting methods in accomplishing complex tasks.
• Prepare various surfaces of interior and exterior components of buildings.
• Mix, thin, blend, match, tint, and tone coating materials.

• You will supervise individuals who perform transportation work in support of the organization's fleet management program
• You will prepare reports, and brief the Chain of Command on priority issues pertaining to transportation functions.
• You will interprets policy from higher authority to determine extent of impact and any changes that may be required.
• You will implement procedures required for change and follow up ensuring consistency of interpretation and application of procedures.

• You will resolve complaints from employees.
• You will evaluate performance of subordinates and ensure timely performance of subordinates of a satisfactory quality of work.
• You will be responsible for enforcement of all technical and administrative provisions related to the management of assigned construction contracts.
• You will manage programs and projects in the product line in a timely manner and accomplish objectives within resource constraints.
• You will chair or serve as part of the Technical Evaluation Team (TET) supporting the acquisition process.
• You will serve as a point of contact for coordination of all assigned construction projects at DoD activities, under the cognizance of the Naval Facilities Engineering Command.

Brief Description & Role

This position is responsible for testing, troubleshooting, and repairing RF components and systems. You will work closely with cross functional teams to ensure the quality and performance of RF equipment, ensuring that all devices meet the required specifications and standards.

Responsibilities

1. Conduct comprehensive testing of RF devices, nodules, and systems to verify their performance, functionality and compliance with industry standards.
2. Ability to read and understand circuit schematics, layout and diagrams.
3. Able to perform RF tests, analyze test data and produce detailed reports outlining findings, and recommendation for improvements.
4. Maintain and operate various RF Test equipment like Spectrum Analysers, Vector Network Analyser (VNA), signal generators, noise figure measurement etc..
5. To perform failure analysis and debugging PCBs to component level.

Requirements

· Diploma /Bachelor in Electronics or Communication Engineering, or equivalence

· Preferably with at least 2 years of working experience in a product-based electronics manufacturing environment / product development.

Skills, Experiences & Knowledge

· Experience in automating test and measurements using bench test equipment.

· Knowledge of programming software in C, C#, Python or LabView.

· Experience with PCB design software

· Experience in antenna parameter measurement

· Preferably with soldering experience

· Excellent communication and documentation skills.