Total 2,687 Education / Training job vacancies in 43 New Scotland Avenue

As the Research Engineer (Equipment/Operations), you are directly involved in tool installation activities for semiconductor process tools. You would need to work proactively to coordinate with the contractor on the ground for the execution and take corrective and preventive actions of lessons learned, due diligently to prevent reoccurrence. You are responsible for performing utilities turn-on after installation is completed. You must perform the activities per ASTAR site procedure and safety policies to ensure all tool-install-related activities are completed, meeting safety, quality, schedule and budget requirements. You will also be required to perform other activities such as operations for the different semiconductor modules (Diffusion, Litho, Dry/Wet Etch, Thin Film, Implant, etc).

Responsibilities:

• Coordinate with all tool-install base contractors to execute equipment hookup for new tools, to meet the high-quality standards, dynamic schedule, and forecasted budget.
• Coordinate with the Project owner (NGTC/APM) to facilitate utility release as per the planned schedule and update tool release status timely
• Follow all safety and environmental procedures to ensure compliance with EHS-related regulations, risk assessment, safe work procedures, and permit-to-work system.
• Play an active role in safety, actively participating in safety discussions and safe work practices.
• Establish regular area walks to identify opportunities for improved safety, cleanliness, housekeeping and efficiency
• Establish regular, working interaction with peers as well as vendors in tool installation & facilitation, communicating clearly and respectfully all relevant information.
• Keep the reporting officer informed regarding the progress of assigned work and any abnormalities observed in your area.
• Demonstrate ability to understand drawing and highlighting discrepancies
• Follow area-specific procedures and documentation
• Prioritize work tasks to meet schedule and expectations, minimum guidance
• Perform tool tool-relativities and cleanroom systems troubleshooting during the hookup phase
• To perform equipment trouble-shooting of the equipments in NGTC when the need arises
• To perform utility-on after installation completion and to work closely with LCAM for complete closure
• To perform tests balancing of exhaust for new tools whenever necessary
• To perform measures for tool consumption during the hookup phase and to work closely with LCAM
• Use methods to organize, calculate, and display data accurately for utility and flowrate measurement
• Perform site activities in accordance to the Discipline

Requirements:

• Degree/Diploma in Mechanical/Electrical/Chemical engineering or equivalent
• Semiconductor experience (Equipment & Process)
• Facilities field or Wafer Fab Manufacturing equipment background will be an advantage.
• AutoCAD

As the Research Engineer (Equipment/Operations), you are directly involved in tool installation activities for semiconductor process tools. You would need to work proactively to coordinate with the contractor on the ground for the execution and take corrective and preventive actions of lessons learned, due diligently to prevent reoccurrence. You are responsible for performing utilities turn-on after installation is completed. You must perform the activities per ASTAR site procedure and safety policies to ensure all tool-install-related activities are completed, meeting safety, quality, schedule and budget requirements. You will also be required to perform other activities such as operations for the different semiconductor modules (Diffusion, Litho, Dry/Wet Etch, Thin Film, Implant, etc).

Responsibilities:

• Coordinate with all tool-install base contractors to execute equipment hookup for new tools, to meet the high-quality standards, dynamic schedule, and forecasted budget.
• Coordinate with the Project owner (NGTC/APM) to facilitate utility release as per the planned schedule and update tool release status timely
• Follow all safety and environmental procedures to ensure compliance with EHS-related regulations, risk assessment, safe work procedures, and permit-to-work system.
• Play an active role in safety, actively participating in safety discussions and safe work practices.
• Establish regular area walks to identify opportunities for improved safety, cleanliness, housekeeping and efficiency
• Establish regular, working interaction with peers as well as vendors in tool installation & facilitation, communicating clearly and respectfully all relevant information.
• Keep the reporting officer informed regarding the progress of assigned work and any abnormalities observed in your area.
• Demonstrate ability to understand drawing and highlighting discrepancies
• Follow area-specific procedures and documentation
• Prioritize work tasks to meet schedule and expectations, minimum guidance
• Perform tool tool-relativities and cleanroom systems troubleshooting during the hookup phase
• To perform equipment trouble-shooting of the equipments in NGTC when the need arises
• To perform utility-on after installation completion and to work closely with LCAM for complete closure
• To perform tests balancing of exhaust for new tools whenever necessary
• To perform measures for tool consumption during the hookup phase and to work closely with LCAM
• Use methods to organize, calculate, and display data accurately for utility and flowrate measurement
• Perform site activities in accordance to the Discipline

Requirements:

• Degree/Diploma in Mechanical/Electrical/Chemical engineering or equivalent
• Semiconductor experience (Equipment & Process)
• Facilities field or Wafer Fab Manufacturing equipment background will be an advantage.
• AutoCAD

Job Description:

• Actively working with cross functional stakeholders to plan and develop new lithography process
• Validate mask designs, reticle tape out and post tape out verifications
• Actively participate in internal and external technical discussions to overcome process related challenges and provide relevant solutions
• Perform process characterization, margin study to determine the process capability of new process platform
• Act as subject matter expert and resource for researchers and industry partners to enable process and/or product realization
• Publish process development outcomes and breakthroughs in research community
• Engage with relevant equipment makers/vendors and responsible for selecting and procuring research equipment
• Work with fab team in establishing SPC for newly developed processes

Job Requirements:

• Bachelors/Masters in Materials Science and Engineering, Physics, Electrical Engineering, or closely related fields are welcome to apply
• More than 5 years of relevant working experience in R&D and/or industry environment and broad exposure in handling 6”, 8” and/or 12” substrate covering nano to micron technology nodes, preferably in SiC/GaN/Photonics
• Proficient in Photolithography tools including Immersion/KrF/I-line Scanner/Stepper/Mask Aligner, knowledge in eBeam Lithography tool will be added advantage
• Hands-on experience in metrology including but not limited to CdSEM, Overlay, OCD, DRSEM, Microscope. Capable to create recipe to support various research requirements
• Knowledge in design and simulation (ProLith, OPC,etc), and reticle layouts (OAS,GDS) review and basic tape out process
• Equipped with Photolithography skill set including fundamental lithography theory, Photoresist characteristic and application, new process setup (swing curve, FEM, DoE, Statistic Root Cause Analysis and problem solving methodology, etc), optimization and margin improvement.
• Relevant hardware and application knowledge in Photolithography tools and metrology.
• Possess good interpersonal and oral/written communication skills, with ability to deliver clear and concise messages to both internal and external stakeholders.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

You will work as an integral part of the laboratory operations team, providing support to the laboratory manager in operations and related laboratory duties such as safety matters, procurement and core equipment training. If you thrive in a dynamic environment and have a passion for managing laboratory operations and contributing to scientific advancements, this role could be an exciting fit for you!

Key Responsibilities

• Oversee the daily operations of the laboratory, ensuring that all processes and procedures are followed accurately and efficiently
  Facilitate training and development of laboratory users
  Support the operations team on laboratory safety and documentation
  Ensure compliance with all relevant regulations and safety standards to maintain a safe working environment
  Manage the laboratory procurement of equipment and supplies, including negotiating contracts with vendors and suppliers
  Implement and oversee maintenance schedules for laboratory equipment to ensure optimal performance and longevity
  Maintain the microfabrication cleanroom in functional state
  Stay abreast of technological advancements to enhance operational effectiveness.
  Other ad-hoc duties

Qualifications

• Bachelor’s Degree in Engineering or related field from a reputable university
• At least one year of working experience in a research/laboratory environment and familiarity with research operations
• Working experience in rapid prototyping, CAD or cleanroom microfabrication is preferred, but not necessary
• Understanding of safety regulations and compliance
• Ability to work cooperatively and communicate effectively with team members and researchers
• Passionate in mastering research equipment and passing on knowledge to users

To apply, please send your cover letter, CV and three references (name, institution, email). Only shortlisted candidates will be contacted.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

The Saw Swee Hock School of Public Health (SSHSPH) at the National University of Singapore (NUS) is seeking a research fellow (RF) for the various projects on chronic disease. The successful applicant will have a strong foundation in epidemiology and quantitative methods, show good initiative in troubleshooting tasks and have excellent communication skills.

The RF will play an important role in the conduct of current research projects on diabetes epidemiology, care and outcomes. In addition, successful candidates will be expected to support the preparation of new grant proposals. The RF will also be expected to work independently, while working in a team-based setting.

Responsibilities:

• Conduct and coordinate clinical or epidemiologic research under the direction and supervision of the Principal Investigator and Collaborators, including preparing applications for ethical approval, data collection and management, and quality assurance
• Manage these research projects in a team-based, cross functional research environment, which include supervising/ mentoring junior research staff and research students
• Undertake necessary statistical analysis, including advanced modelling techniques, to interrogate the data
• Draft research reports and manuscripts for scientific sharing and publication
• Support the preparation of new grant proposals
• Attend project meetings and to participate (where necessary) in other meetings
• Ensure compliance with health, safety and ethical guidelines in all aspects of work
• Undertake any other specific roles and management functions as may be reasonably required by the Principal Investigator

Requirements:

• PhD Degree in public health, epidemiology, biostatistics, health services research, health information science or related fields.
• Proficiency in English is a must as the candidate will be required to write scientific papers for publication in international peer reviewed journals and present work undertaken to a technical audience.
• Track record of publications in international peer reviewed journals
• Proficiency in the use of statistical software (Stata and R)
• Expertise in epidemiological and statistical analysis techniques, including joint modelling for time to event analysis and Markov modelling
• Ability to work independently as well as in a team-based, cross functional research environment
• Self-motivated, independent learner and detail-oriented
• Good project management skills

Recruitment is open immediately. The grade of appointment will be accorded based on candidate’s academic qualifications and years of relevant experience.

To apply, please submit the following documents:
a. Cover letter highlighting career goals and relevant experience
b. Curriculum Vitae, containing details of two named referees

Please note that only shortlisted candidates will be contacted.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

The National University of Singapore invites applications for the position of Research Assistant in the Department of Information Systems and Analytics, School of Computing. The School of Computing is strongly committed to research excellence in all its dimensions: Searching for fundamental results and insights, developing novel computational solutions to a wide range of applications, building large-scale experimental systems and improving the well-being of society. We seek to play an active role both internationally and locally in the core and emerging areas of Computer Science and Information Systems.

The Research Assistant will be responsible for working closely with the Principal Investigator and lab members on one or more research projects. He/she should possess experience or interest in at least one of the following research areas:

Key responsibilities:

• Build a tree based private blockchain system for the given specification. It is a tree structure with hash based dependency for validation similar to blockchain.
• Evaluate the tree based system for efficiency, accuracy, scalability, throughput and energy efficiency through simulations with varying data complexities.
• Build an application using the tree based structure and gather insights from users, developers or businesses leveraging BlockForest, focusing on ease of usage/integration and practical benefits.

Only shortlisted candidates will be notified.

Job Requirements

• A Bachelor’s degree with Honours in Computer Science or related area;
• Good knowledge in Blockchain technologies; and
• Experience in research

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

The laboratory of Presidential Young Professor Liu Yuxin at National University of Singapore (NUS Bioelectronic lab website: https://www.lab-liu.com/) seeks postdoctoral fellows with strong enthusiasm and interest in implantable electronics, wearable electronics, flexible electronics, and bioelectronics research.

Key Responsibilities

• Lead and manage a multidisciplinary research project
• Design and conduct research in flexible electronics, implantable electronic, wearable electronics and electrical engineering area
• Validating the bioelectronics in pre-clinical or clinical model
• Prepare and draft manuscripts for high-impact journals

Qualifications

• Obtained or expecting a PhD degree in Electrical Engineering, Biomedical Engineering, Chemistry, Material Science and Engineering or related fields
• A strong interest in bioelectronics, wearable electronics, flexible electronics. Scientific curiosity and motivation to perform scientifically rigorous experimental work.
• Previous experience in printed electronic board (PCB) design, electronic circuits, firmware and APP development
• Excellence in conducting independent research with great critical thinking and experimental design. Interested in working in a multidisciplinary team and leading a multidisciplinary project
• Strong verbal and written communication skills in English
• Previous research experience in microfabrication is advantageous.

The SingHealth Duke-NUS Global Health Institute (“SDGHI”) is a platform for global health activities across the SingHealth Duke-NUS Academic Medical Centre (“AMC”). The Institute aims to address current and emerging health challenges across Asia. Working in collaboration with partners, the Institute seeks to tackle prevalent health challenges, strengthen health systems and better insulate countries from pandemics and disease threats.

The Global Health Systems Research Unit is a new and dynamic unit focused on elucidating health system challenges and developing solutions. It collaborates with partners in Singapore and across Asia, generating evidence that drives intervention programmes across the AMC. The unit explores innovative ways to work with data, including testing AI tools for efficient management, analysis, synthesis, and visualisation of research data.

The Research Associate will play a dual role, supporting both SDGHI’s Global Health Systems and the SingHealth Centre for Person-Centred Care (CPCC). The ideal candidate will report to the SDGHI Clinical Core and work closely with the team at CPCC to contribute to projects that improve health equity and access in Singapore and across Asia.

Key Responsibilities

• Contribute to a wide range of health systems and services research programmes, including health systems analysis, policy analysis, and evaluation of person-centric initiatives.
• Develop and validate new measures of patient-reported experience and health systems and services frameworks.
• Conduct ethnographic and qualitative research, utilising participatory approaches to health systems and services research.
• Implement advanced data tools for efficient management, analysis, synthesis, and visualisation of health systems data, ensuring accuracy.
• Assist with project management, coordinating effectively among diverse stakeholders within SingHealth Duke-NUS AMC and external partners (including overseas) to achieve project goals.
• Write research manuscripts, case studies, reports, presentations to academic audiences, funders, and other stakeholders.

Job Requirements:

• Master’s Degree in Public or Global Health, Social Sciences, or a field relevant to health systems and services research.
• Minimum 3 years of professional experience in health and social systems research.
• Demonstrated proficiency in both qualitative and quantitative research methods, with experience in ethnographic and participatory approaches. Prior experience in behavioural economics is highly advantageous.
• Possess excellent academic writing and presentation skills.
• Experience in leveraging AI tools for quantitative and qualitative data synthesis and analysis is highly advantageous.
• Possess a growth mindset and can manage multiple projects with dynamic reporting lines and multiple stakeholders.
• Embrace a decolonising mindset and the principles of equity, diversity, and inclusion.
• Available for regional travel.

We regret that only shortlisted candidates will be notified.

Job description: Research Scientist, Chemical Development: Linker-payload synthesis for Antibody Drug Conjugates (ADCs):

• Engage in groundbreaking research and development in the field of synthetic organic chemistry, peptide chemistry.
• Investigate and explore new ideas and concepts by defining experiments in order to verify proof of principle.
• Collaborate with biologists constantly to develop novel linker-payloads for next generation Antibody-Drug Conjugates
• Collaborate closely with project team members and other cross-functional groups in the organization.
• Submit and present project updates and reports in verbal and written formats.
• Write invention disclosures and possible patent applications.
• Manage and prioritize daily assignments to ensure timely completion.
• Attend and participate in scheduled planning meetings and/or status meetings.
• Manage and maintain required reagents, laboratory environment, and equipment needed to carry out assignments.
• Adhere to safety and regulatory requirements
• Transfer new products from R&D to Manufacturing.
• Responsible for sustaining products to address customer needs
• Writing SOP and work instruction according to Quality management standards and requirements.
• Other opportunities may include possible contributions to scientific literature and presentations at conferences.

Requirements

• PhD in synthetic organic chemistry with 5 years relevant experience.
• R&D experience in multi-step small molecule synthesis, peptide synthesis
• Proficient in operating analytical equipment and applying analytical chemistry principles
• Experience with new product development is a plus
• Strong understanding of instrumentation principles and troubleshooting ability.
• Strong understanding of synthetic chemistry
• Strong understanding of Analytical chemistry principles
• Record of accomplishment should be demonstrated by publications or patents
• Demonstrated organizational skills with the ability to balance multiple tasks with different priorities
• Ability to make independent decisions and possess strong initiative
• Ability to dissect problems with strong analytical and critical thinking skills
• Ability to accurately plan, define, and manage projects tasks
• Must possess excellent verbal and written communication skills.
• Capable of working with multi-disciplinary teams.

Job Description:

• Developing and optimizing thin film processes, such as Physical Vapour Deposition (PVD) and e-Beam Evaporation for Micro-Electro-Mechanical-Systems (MEMS), Wide-Band-Gap (WBG) and Photonics applications.
• Thin film property characterization and process issue troubleshooting.
• Develop film defect reduction and yield improvement strategies.
• Act as a subject matter expert and resource for colleagues in integration teams.
• Work with Fab team in establishing statistical process control for thin film module.
• Generate and present reports to both internal and external customers.

Job Requirements:

• Bachelors/Masters in Materials Science and Engineering, Physics, Electrical Engineering, or closely related fields are welcome to apply.
• 3+ years direct industry experience in PVD and evaporation is preferred.
• Good understanding of thin film deposition techniques, defect reduction methodologies, yield improvement and thin film property characterization is desired.
• Understanding of thin film tool hardware, especially PVD and evaporation, is advantageous.
• Knowledge and prior hands-on experience on basic process characterization techniques such as SEM/TEM, EDX, SIMS, FTIR, XPS, ellipsometry is advantageous.
• Good understanding of thin film deposition techniques, defect reduction methodologies, yield improvement and thin film property characterization is desired.
• Possess good interpersonal and oral/written communication skills, with ability to deliver clear and concise messages to both internal and external stakeholders.

Job Description:

• Actively working with cross functional stakeholders to plan and develop new lithography process
• Validate mask designs, reticle tape out and post tape out verifications
• Actively participate in internal and external technical discussions to overcome process related challenges and provide relevant solutions
• Perform process characterization, margin study to determine the process capability of new process platform
• Act as subject matter expert and resource for researchers and industry partners to enable process and/or product realization
• Publish process development outcomes and breakthroughs in research community
• Engage with relevant equipment makers/vendors and responsible for selecting and procuring research equipment
• Work with fab team in establishing SPC for newly developed processes

Job Requirements:

• Bachelors/Masters in Materials Science and Engineering, Physics, Electrical Engineering, or closely related fields are welcome to apply
• More than 5 years of relevant working experience in R&D and/or industry environment and broad exposure in handling 6”, 8” and/or 12” substrate covering nano to micron technology nodes, preferably in SiC/GaN/Photonics
• Proficient in Photolithography tools including Immersion/KrF/I-line Scanner/Stepper/Mask Aligner, knowledge in eBeam Lithography tool will be added advantage
• Hands-on experience in metrology including but not limited to CdSEM, Overlay, OCD, DRSEM, Microscope. Capable to create recipe to support various research requirements
• Knowledge in design and simulation (ProLith, OPC,etc), and reticle layouts (OAS,GDS) review and basic tape out process
• Equipped with Photolithography skill set including fundamental lithography theory, Photoresist characteristic and application, new process setup (swing curve, FEM, DoE, Statistic Root Cause Analysis and problem solving methodology, etc), optimization and margin improvement.
• Relevant hardware and application knowledge in Photolithography tools and metrology.
• Possess good interpersonal and oral/written communication skills, with ability to deliver clear and concise messages to both internal and external stakeholders.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

The National University of Singapore invites applications for MRI trained Radiographers in the Centre for Translational MR Research, Yong Loo Lin School of Medicine. Five days work week, non-shift.

Purpose of the post

The successful candidate will perform independent MRI examinations on a wide range of body parts and to be familiar with different MR imaging techniques for research - primarily neuro related but also some body, musculoskeletal, cardiac and MR spectroscopy. Candidate will also have the opportunity to learn MR data processing and programming if keen.

Main Duties and Responsibilities

1. Perform MR imaging on a range of body parts and MR techniques.
2. Maintain MR Safety of all procedures happening at scanner site.
3. Responsible for good housekeeping of the procedure rooms and work areas.
4. To run regular quality assurance checks on scanner.
5. To work with researchers to develop standardized scanning protocols for their studies and to work in accordance to safe work practices.
6. Ensure proper archival of acquired data.
7. Perform other administrative duties or ad-hoc quality departmental project/activities as assigned by the Director/Reporting Officer.

Qualifications

1. Degree in Radiography/ Diploma in Diagnostic Radiography/ Degree in medical imaging
2. Valid registration with Allied Health Professions Council (AHPC)
3. MRI trained
4. BCLS + AED certified
5. Effective communication and interpersonal skills

Remuneration will be commensurate with the candidate's qualifications and experience. The review starts in September 2024 and will continue until the position is filled.

Only shortlisted candidates will be notified.

- Operates several complex work stations or a portion of a large fuel storage and dispensing system to transfer fuel to aircraft and refuelers.
- Receives incoming petroleum fuel and cryogenic product shipments by truck, tank car, or pipeline.
- Issues petroleum products to containers and refueling units through fillstands. Operates motor vehicle system.
- Inventories and inspects the storage/distribution system and the condition of the products received and issued.
- Performs operator maintenance of the fuel storage and dispensing equipment. Utilizes safety practices and procedures following established safety rules and regulations and maintains a safe and clean work environment.

• Uses a variety of specialized equipment to perform a full range of techniques to measure and monitor meteorological, sediment transport and carbon cycle processes.
• Maintains records and locates and compiles data and other information from various sources on meteorological, sediment transport and carbon cycle processes.
• Searches for literature pertinent to area of research for new procedures or techniques to use in the laboratory and field to monitor biophysical properties and processes
• Collects, prepares, evaluates and verifies samples and supporting records, including physical specimens and electronic data for long-term monitoring and experimental projects on wind erosion, dust emission, and carbon cycling.

As a Maintenance Mechanic WG-4749-10, your typical work assignments may include the following under supervision:

• Independently apply skilled methods, techniques, and advanced shop mathematics to construct, install, repair, and modify a wide variety of structures. Works on projects such as building frames, rafters, concrete forms, walls, staircases, door and window frames, interior and exterior trim, and other miscellaneous items.
• Utilize safety practices and procedures following established safety rules and regulations and maintains a safe and clean work environment. Uses and maintains tools and equipment.
• Perform masonry tasks involved in the maintenance, repair, alteration, and construction of interior and exterior surfaces and structures. Lays bricks, firebricks, cement/glass blocks, tile, terra cotta, and artificial and natural stones.
• Plan and lays out work from blueprints, sketches, drawings, specifications, and work orders in the construction and maintenance of installation facilities. Reviews work order requirements reflecting structures to be constructed, installed, modified, altered, or repaired.
• Develop patterns, cuts, forms, joins, assembles, and installs items and systems which have combined straight and curved edges or irregular curves, angles, and planes. Uses complicated shop mathematics to calculate irregular curves, angles, and pitch. Applies principles of radial-line development combined with parallel-line development to devise and calculate patterns.